Speakers not recognized during te

Hello, I have a X-Fi XtremeMusic soundcard and Klipsch 5. Promedia setup for my computer. I recently moved, and when I reassembled my computer & speaker system the rear speakers were not responding when I tested them in both the THX setup as well as the creative speaker connection wizard. Nonetheless, when I play music sound is emitted from all speakers. The speaker system works, but the problem with the testing still bothers me. I could rearrange the speakers and guess which ones are the front speakers by the amount of noise they emit during a song, but I would much rather determine which speakers are which by the proper software tests. I've reset my speaker system and have the latest drivers for the card. Any help/suggestions are appreciated. Thanks. -Dom

Dom,
Others have reported similar issue when they have certain logitech webcam installed in their system. If you do have these webcam, perhaps you can looking into this faq from logitech.
http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=527
Jason

Similar Messages

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Bose companion 3 speakers not recognized

My imac is not recognizing my Bose companion 3 speakers. This is the second time since I bought these speakers 3 years ago.The last time this happened, the problem simply fixed iteself after leaving things unplugged for a few weeks. One day I plugged everything again and suddenly, the speakers appered in the output option of sound section in system preferences. No luck with that this time.

Hello,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Bose Companion Speakers not recognized

My son has a set of Bose Companion Speakers that are not recognized with his macbook, but his brother's macbook does recognize them and they work fine. Any ideas as to why the one macbook no longer can recognize the speakers, it did at on time.
Thanks

You say that other speakers are recognized on this Mac.
Do you mean other USB speakers or other analog type speakers that plug into the speaker jack?
If it is the later, does your Mac have a red light showing inside the speaker jack? If so, the problem is with a switch integral to that jack. If not red light, I don't know what is wrong.
Try logging into your computer in another User Account. Create one if need be. This will help rule out the possibility of corrupt software in your main user account. It is very unlikely that a driver went bad or got removed. This is a Mac and that just doesn't happen unless someone literally removed files from the System folder or other Library folder, and you would know if you did that.

USB not recognized during restore

Trouble with upgrading software, the process hangs in the restore, keep getting error 1604, wondering if the USB is getting reset in the restore process? I have turned off the virus protections,etc. so that should not be the problem.

Here is an extract from the apple site dealing 1604. Hope it helps.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Here is the link to the full article
http://support.apple.com/kb/TS1275

Scsi controller not recognized during ftp install

Hi all,
As you can tell, this is my first post and my first attemp to install arch. I downloaded the latest ftp install floppies "Arch Linux 0.5 (Nova)" and I am trying to install arch on a PII system with and Adaptec 2940UW controller and no cdrom. I can boot from Tom's recue disk:
http://www.toms.net/rb/
and the controller is recognized and I can use fdisk to partition the drive.
However, when I boot from the arch install floppies, the controller is not recognized. When I manually load the module for the controller, ie. aic7xxx, lsmod shows it as unused.
After looking at the boot log using dmesg, I noticed the following, which I don't understand:
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno=2
Is this a kernel issue and does anyone have any pointers for me?
Thanks
Kevin
PS: I tried my best to search for a related topic.

Thanks for the reply. It still doesn't work for me.
I noticed that the floppy images have been updated -- the md5sum's have changed. I will give them a try.
As an aside, the listed md5sum's for the new images don't match the downloads. I downloaded from several mirrors and I get the same sums, which don't match the sums listed.
$ md5sum *.img
99683b5a119e6332cd8f2185a24083cf boot.img
d2501030749fa2629582de1f02846056 modules.img
97fb96d7b1d858cb260ea8b1005e071b root.img
$ cat md5sums
2d172ab879f1487f0a381cf432173c26 boot.img
ce6408f0e4051656ddf9c2df3356f1f8 modules.img
97fb96d7b1d858cb260ea8b1005e071b root.img
Thanks
Kevin

Map not recognized during runtime

While running a test (during runtime), the map is not being recognized
by the system. We have cleared SLD Cache in IR and ID, and using
SXI_CACHE several times and during runtime we still get the following
error about the map not being found. The error is as follows:
Runtime error Unable to find resource a1ebddd0-0d05-11dd-a1d7-
eecb0a0a3d7e in the following software component versions:
urn:ariba.com:xi:Procurement:CreatePurchaseOrdercom/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestM~-1
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace><Trace level="3" type="T">Mapping already defined in interface
determination </Trace>
<Trace level="3" type="T">Object ID of Interface Mapping
15D05B740F5D39BCBACC32BCA4E1FCE7 </Trace>
<Trace level="3" type="T">Version ID of Interface Mapping
A1EBDDD00D0511DDA1D7EECB0A0A3D7E </Trace>
<Trace level="1" type="T">Interface Mapping
urn:ariba.com:xi:Procurement:CreatePurchaseOrder
IFM_TX_WSPurchaseOrderPush_2_Z_ARIBA_KT_PO_CREATE </Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_ </Trace>
<Trace level="3" type="T">MTOM Attachments are Transferred to the
Payload </Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty </Trace>
<Trace level="2" type="T">Mode 0 </Trace>
<Trace level="3" type="T">Search
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class
(urn:ariba.com:xi:Procurement:CreatePurchaseOrder, -1) in swcv a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e. </Trace>
<Trace level="3" type="T">Search
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class (-1) in swcv a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e
without namespace. </Trace>
<Trace level="1" type="T">Unable to find resource
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class in the following software component versions:
a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e
Thrown:
com.sap.aii.ib.core.mapping.execution.ResourceNotFoundException: Unable
to find resource
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class in the following software component versions:
a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e
at com.sap.aii.ib.server.mapping.execution.JavaMapping.load
(JavaMapping.java:148)
at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep
(JavaMapping.java:67)
at com.sap.aii.ib.server.mapping.execution.Mapping.execute
(Mapping.java:60)
at com.sap.aii.ib.server.mapping.execution.MappingHandler.map
(MappingHandler.java:87)
at com.sap.aii.ib.server.mapping.execution.MappingHandler.map
(MappingHandler.java:71)
at
com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:119)
at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest
(MappingRequestHandler.java:72)
at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction
(MappingServiceImpl.java:79)
at sun.reflect.GeneratedMethodAccessor511.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke
(Interceptors_Resource.java:71)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy279.processFunction(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183)
at
com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:267)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:182)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:280)
</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>

In which system you are facing this problem?
If it is Developement system then do the following steps and then try again.
1. In your interface mapping remove the message mapping first and then activate the interface mapping.
2. Do some dummy change in your message mapping or rename the message mapping by copying it and activate it.
3. Now use this message mapping in your interface mapping and activate IM.
If it doesn't work delete all objects and recreate them. (or may be rename them ).
One more important thing... Check your Interface Determination and make sure the outbound & inbound message interfaces are exactly same as used in Interface Mapping.

External speakers not recognized

After sucessfully setting up airport, and getting my external speakers to work, my apple network no longer sees the external speakers. The speaker option does not come up at the bottom right of my iTunes screen. Any ideas?
TIA

Mike in No. Va. wrote:
When I hooked up the Bose Companion II speakers .... the computer didn't recognize them.
Am I missing something here? Whenever I've connected a USB device
to my MacBook Pro or Powerbook G4 they've worked flawlessly.
I've seen referenced to setting up the MIDI utility, could that be it?
Not sure what you mean by "the computer didn't recognize them."
Do they appear in *System Preferences > Sound > Output* ?
When I connect a USB audio output device, the system "sees" it -- but
doesn't automatically enable it as the active audio output. The system
default (internal speakers or headphone jack) remains in force 'til you
change it manually -- either in System Preferences > Sound > Output
or with /Applications/Utilities/Audio Midi Setup > Audio Devices.
Looby

WRT54g not recognized during setup

I am trying to setup the WRT54G wireless router but for some reason the computers will not recognize it.
I tried the routers page 192.168.1.1 and that did not work. I tried easy link and that could not detect the router. When i use the CD it give me a router error during the checking status state of the setup.
any ideas on what the problem could be?
thanks

To worm1028 ---
You need to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

[SOLVED (mysteriously)] Arch on USB not recognized during boot

Hi there,
I hope, someone can help me with my problem, I have been searching and trying different things for quite some time now, without success.
I treated myself a new Notebook, Acer Aspire S7 and wanted to run Arch on it. However I am new to Linux and want to try it out on an USB-Stick, to keep the factory install of Win8 intact. (Also, this notebook does not have such a great HDD capacity) Additionally I want to have full disk encryption.
So I followed the Beginner's Guide with modifications described here and here
When it came to install the bootloader I chose Grub for EFI.
I then removed the USB-Stick with the live-Arch, which I used for installation and rebooted and it worked!
However: As soon as I completely shut down and boot again, the USB-Stick with my installation is no longer recognized. If i boot the live-Arch again, reinstall Grub and then reboot, it again works.
Here is something, I found strange. This is the output of efibootmgr:
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 2001,0003,0002,2002,2003
Boot0000* USB HDD: KingstonDataTraveler 2.0
Boot0001* Intel HDD0
Boot0002* Windows Boot Manager
Boot0003* arch_grub
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot2003* EFI Network
BootCurrent is 0000, but that number does not appear in the Boot-Order list. Could that be something?
Well, I hope someone has an idea. I will happily share any information about my setup with you, just ask.
Thanks,
Max
Last edited by MaxT (2014-04-07 08:35:20)

Sorry for digging that threat up again. I just wanted to share with you the solution to the problem I was having. Perhaps it will save someone else some frustration.
The Acer Aspire S7 has a dongle that goes in the display port and provides an ethernet and an VGA port. It was that dongle that prevented the USB stick with the Arch installation from being recognized. Done attached -> USB stick was ignored, dongle detached -> it worked.
I have no idea, why that is the case, but maybe this info is helpful for someone.
Cheers,
Max

SID not recognized during install

When installing the OID choice from the 8.1.7 NT installation disk, the OID installer will not recognize the SID of the existing database, variations of the TNSnames configuration have yeilded no result.
I cannot get OID installed at all under 2000.
Thanks
Rob

Is it possible that you have removed all or some of the
registries for the database instance you are trying to install
to?
Is there any reason why you can't install OID in a new instance
by itself. If you do a default installation of OID it will create
a new isntance for you.

Hp pavillion dv9000 onboard sound card/speakers not recognized

I have an old HP Pavillion dv9000, it has been with me for a while. I took it with me to Iraq back in 2007-2008 and it has a lot of sentimental value to me. I don't currently have the funds to replace it, and it still works quite well for my needs as a full-time student; however, last week I moved into a new apartment and discovered that for whatever reason it no longer recognizes its onboard sound card or speakers. Additionally, sound no longer works through the headphones, and I've also attempted to update drivers but it made no difference. There is a red circle x over the speaker icon in the tray and I recieve a "No Audio Output Device is installed" message when I scroll over it. I'm running on Windows Vista and the speakers worked fine just last week. Lastly, I attempted to find the sound card myself to see if perhaps it needed reseating, but I had no idea where to look. Any help to resolve this issue would be greatly appreciated.

Hello fredo5,
Please take a look at the troubleshooting steps in this document, and let me know if it helps resolve your sound issues.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Cannot switch after restart because bluetooth not recognized

I am having a problem switching from OSX to windows because my bluetooth keyboard is not recognized during restart. So i am not able to hit the Alt(option) button while restarting to get the option of switching. Is there a way to fix/go around this?
thank you.

Not really - that would be the easiest option; I also have an older keybord nearby (also because Bluetooth is not as 100% troublefree as a wired connection). So, yes buy a third party keyboard or borrow one from a neighbor...

Install error during make of Pro*/C++ - file not recognized:

Say, anyone seen this error during install? The file or directory "proc" is indeed missing... is this a known shortcoming of this release? Can these make errors be ignored?
Thanks in advance
Dennis
Starting install Link Phase of component Oracle Internet Directory Client Common Files
Starting install Link Phase of component Required Support Files
Starting install Link Phase of component Oracle Code Editor
Starting install Link Phase of component Oracle Database User Interface
Starting install Link Phase of component Oracle Ultra Search Server Rdbms
Starting install Link Phase of component Enterprise Manager Minimal Integration
Starting install Link Phase of component Object Type Translator
Starting install Link Phase of component Pro*C/C++
Calling Action unixActions10.1.0.3.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /app/oracle/OraHome_1/precomp/lib/ins_precomp.mk
     installTarget = relink
     installArguments = ORACLE_HOME=/app/oracle/OraHome_1,EXENAME=proc,
     undoMakeFileName = null
     undoTarget = null
     undoArguments = null
     logFile = /app/oracle/OraHome_1/install/make.log
     progMsg = Linking proc
The output of this make operation is also available at: '/app/oracle/OraHome_1/install/make.log'
Start output from spawned process:
Linking /app/oracle/OraHome_1/precomp/lib/proc
/app/oracle/OraHome_1/lib/s0main.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
/bin/chmod: failed to get attributes of `/app/oracle/OraHome_1/precomp/lib/proc': No such file or directory
make: *** [app/oracle/OraHome_1/precomp/lib/proc] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Unable to read the list of homes from the inventory.

If your library is in the standard layout of an iTunes folder containing an iTunes Media folder (and you've already copied over the media) then you can simply copy the iTunes library files and album artwork folder across to the new machine recreating the same layout. If the media folder has been split out from the main iTunes folder then see make a split library portable for a way to get the library into a portable form, after which you can copy over the library files.
tt2

Device not recognized by stereos / speakers?

Hi, we have a few different stereo's / speakers in our house that all have ipod docks and usb and other plugs for miscellaneous devices but for some reason every other music device is recognized except blackberry products. I've tried my playbook and two different phones including my Q10 and it alwasy says the device is not supported or not recognized? Why? how can every other music device work fine except blackberry?

Errors? Specific issues?

Speakers not recognized during te

Similar Messages

Maybe you are looking for