Special GL not found in OBYR

in F-44, we use special gl indicator K, but in OBYR, i can't find this special GL indicator, how can I find this vendor special GL Kin configuration, like reconcil account.

Hi,
F-44 is relating to the Vendor (account type - K) .
For account type K, SPGL = K is not defined in the standard system.
If you want the same, you can create it.
In TCODE: FBKP, you can find all account determination links in one place. If you see the SPGL indicator, it shows both Customer & Vendor together. For Customr, SPGL indicator is defined and not for Vendor.
There is no harm in creating the new indicator, it is again based on your requirement.
VVR

Similar Messages

Special characters not found!

I cannot find the following characters:
ü (umlaut-u), ö (umlaut-o), or ä (umlaut-a)
Any help highly appreciated!

And of course the option to hit Option and not "alt" is always there as they are both not not the same keys which translates to being the same keys should you wish to take that option or alternatively the alt key if that is the option you have... or not.
Joviality aside, thanks for the clarification Doug. Now where's my Martini
RD

MSVCR80.dll was not found! Where do I find it? Where shall I put it? Shall I install it in a special way?

MSVCR80.dll was not found! Where do I find it? Where shall I put it? Shall I install it in a special way?

Hi erikbikeon,
Thanks for visiting Apple Support Communities.
If you are receiving errors in Windows when using or reinstalling iTunes, I recommend completely removing and reinstalling the software using the instructions in this article:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
This process should not affect any music or content on your computer, but you may want to
back up your iTunes library by copying to an external hard drive.
When reinstalling iTunes (step 3 in the article above), be sure that you are logged in to your computer as an Administrator:
Make sure you have an administrator account.
To install iTunes or QuickTime, you need to log in as an administrator on the computer. If you're not sure you have an administrator account, you may find this Microsoft article helpful: Windows 7: How do I log on as an administrator?You can refer to the Help documentation from Microsoft, contact your IT department, or visit support.microsoft.com for more information.
From:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best Regards,
Jeremy

Material in two plants, I run MRP with the BOM is not found in prod plant

Hi all,
I have plant 1020 material 12345
Plant 1020 is the production plant for material 12345
The material 12345 exists in plant 1070.
The material 12345 in plant 1070 has no MRP.
Plant 1020 material 12345 config in MM03
MRP1 --> MRP Type = PD
MRP1 --> MRP Controller = G03
MRP3 --> Planning material = PLAN_1020_GR03
MRP3 --> Planning plant = 1020
Plant 1070 material 12345 config in MM03
MRP1 --> MRP Type = P3
MRP1 --> MRP Controller = 017
MRP3 --> Planning material = empty
MRP3 --> Planning plant = empty
The BOM in cs11 for plant 1020 material 12345
has 3 components
Comp#1
Comp#2
Comp#3
The Dependency is code
TABLE TB_1020_SUPERBOM (PP_nuance_interne = $ROOT.PP_nuance_interne,
PP_dim_billette_bom = $ROOT.PP_dim_billette_bom,
PP_CODE_LONG_BILL = $ROOT.PP_CODE_LONG_BILL,
pp_component_bom =$self.pp_component_bom).
The dependency is not found because it is looking for it in the plant 1070 and not the plant 1020.
When the MRP runs for a Delivery type stock transfer order I get
CONFIG_1020_BILLET <---- This is the BOM item component field in CS11 in the Basic data tab
Comp#2
Comp#3
instead of
Comp#1
Comp#2
Comp#3
When I run MRP for the same material, if there's no
"Delivery based on Stock transfert orders" the MRP associates the correct components
Hope this explains m'I situation.
Regards!
Curtis

Hi,
If you want a reply in one line, it would be SAP R/3 does not supoort this feature.
You will have to go for APO module.
There are few things which can be done in R/3 side, as in maintaining a scope for MRP run in OM0E, maintaining special procurement key etc etc, but all these will not do any check of stock in another plant & can only help in a very limited way if all any for your specific need.
But SAP R/3 provides a cross plant evaluation via MD48 to know the stock & demands at all plants, this can help only for evaluation purpose.
Hope it clarifies.
Regards,
Vivek

Error code: 0x80070035 The network path was not found

"Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".
Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
All strarted and running in Automactic mode.
Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
Someone please help !

Hi,
In addition, I would like to suggest the following:
Enable NetBIOS over TCP/IP:
1.    Go to “Control Panel\Network and Internet\Network Connections”.
2.    Right-Click on the connection and choose Properties.
3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
4.    Click Properties, and then click Advanced.
5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
Thanks.
Nicholas Li - MSFT

"Error: Document not found (WWC-46000)" with a form based on a table with blob item

Hi all,
I have to manage a table-based form. One of the fields of the table is BLOB and the corrisponding field of the form is HIDDEN.
When I push the INSERT button all works well but when I try to UPDATE I get "Error: Document not found. (WWC-46000)".
Have you some suggestions ?
Thanks,
Antonino
p.s. Oracle Portal 3.0.7.6.2 / NT
null

Sorry, I think I did not explain well my problem.
Imagine this simple table:
key number;
description varchar2(50);
image blob;
I need to make a form that contains the corresponding "key" field and the "description" field but not the "image" one. I don't want to allow the end user to upload images!
When I insert a row the form works well and in the "image" field of the table an empty blob or null (now I don't remember) is stored: that's ok.
Now imagine I want to change the value of the "description" field. I submit a query for the right key, I type a new value for the description and finally I push UPDATE button but....an error occours.
I think this error is related with the Blob item of the table but I'm not sure.
Thanks again,
Antonino
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Dmitry Nonkin([email protected]):
Antonino,
If I understood the problem correctly:
The form's item type for BLOB column used to upload content cannot be hidden, that's why we have a special item type FileUpload(binary).
Thanks,
Dmitry<HR></BLOCKQUOTE>
null

Oracle.jbo.NoDefException: JBO-25002: Definition oracle.webcenter.search.model.DataControls of type null is not found.

Hi experts,
I am trying to deploy a new version of a WC Portal application and when the deployment finishes successfully I cannot see the web page. The error is:
Error 500--Internal Server Error
oracle.jbo.NoDefException: JBO-25002: Definition oracle.webcenter.search.model.DataControls of type null is not found.
    at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2772)
    at oracle.adf.model.binding.DCDataControlConfigDef.findDefObject(DCDataControlConfigDef.java:32)
Checking the output log I can see:
<Jul 29, 2013 2:47:21 PM CEST> <Error> <HTTP> <BEA-101020> <[ServletContext@667149283[app:<App_name> module:<Module> path:/<Path> spec-version:2.5 version:V4.0]] Servlet failed with Exception
oracle.jbo.NoDefException: JBO-25002: Definition oracle.webcenter.search.model.DataControls of type null is not found.
        at oracle.jbo.mom.DefinitionManager.findDefObjectUsingMetadataObject(DefinitionManager.java:2772)
        at oracle.adf.model.binding.DCDataControlConfigDef.findDefObject(DCDataControlConfigDef.java:32)
        at oracle.adf.model.binding.DCDataControlDef.findDefObject(DCDataControlDef.java:377)
        at oracle.adf.model.binding.DCDataControlReference.<init>(DCDataControlReference.java:55)
        at oracle.jbo.uicli.mom.JUApplicationDefImpl.loadDataControlUsage(JUApplicationDefImpl.java:1137)
        Truncated. see log file for complete stacktrace
Caused By: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/oracle/webcenter/search/model/DataControls.dcx"
I have checked similar errors in the forums and tried the solutions purposed but with no success. I do not understand why the application is looking for the DataControls.dcx file inside a standard WC Search library.
Any help would be much appreciated.

Hi Dani,
Eventually I found the problem, it is reported in Oracle Support as Doc ID 1503173.1.
It seems jDeveloper is a bit special when adding Directories to the MAR file. If the whole directory "/oracle" is added, the adf-config.xml introduces the following line:
namespace metadata-store-usage="WebCenterFileMetadataStore" path="/oracle"/
As a result, this diverts all /oracle/... file and class requests to MDS, which causes failures.
So when editing the MAR deployment profile be careful to select the sub-directories under /oracle/webcenter/portalapp/ one by one.
Added to this, I had to perform the cleaning process you suggested to make it work too, otherwise I get a different error...
Final steps are:
1. Undeploy application.
2. Delete MDS partition.
3. Shutdown managed server.
4. Delete /cache and /tmp content for the managed server.
5. Start managed server.
6. Exectute Clean all in jDeveloper.
7. Create a new mar deployment as described in SR 1503173.1.
8. Deploy to EAR file.
9. Deploy new application to managed server using Enterprise Manager.
And it works!
Thanks for your help!

Creation of new Portal Apps!!portal.wf not found !!!

Hi ,
In EBCC I am creating a new portal web application in the existing Portal
Application. I am assigning default portal webflow to my new Portal.
After synchronization , if I access the portal by its context root it
says, portal.wf not found..
What is the significance of portal-project directory ?
regards
vedant.

We found the problem,
We had to add a numeric and /or a special charachter in the password

WebUtil: oracle.forms.webutil.host.Host bean not found

Hi. This is my first attempt using WebUtil. The following code is in my When-New-Form-Instance trigger:
client_host('N:\TTMS\ITS\vbasic\compiled\MenuUpdate.exe');
This is the error I receive:
oracle.forms.webutil.host.Host bean not found
I've included my formsweb.cfg below for your reference. Note that the application is using the [ttmsmenu] configuration.
Thanks in advance for your help with this problem.
***FORMSWEB.CFG***
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
#WebUtilArchive=frmwebutil.jar,jacob.jar
#WebUtilLogging=off
#WebUtilLoggingDetail=normal
#WebUtilErrorMode=Alert
#WebUtilDispatchMonitorInterval=5
#WebUtilTrustInternal=true
#WebUtilMaxTransferSize=16384
# System parameter: default base HTML file
baseHTML=base.htm
# baseHTML=webutilbase.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# baseHTMLjinitiator=webutiljini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# baseHTMLjpi=webutiljpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
# HTMLbeforeForm=
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT>
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
#imageBase=DocumentBase
imageBase=codeBase
# Forms applet parameter default 750
# width=1000
# width=100%
width=500
# Forms applet parameter default 600
# height=700
# height=100%
height=500
# Forms applet parameter default false
separateFrame=true
# Forms applet parameter
# splashScreen=
splashScreen=no
#splashScreen=ttmslogo_new.gif
# Forms applet parameter
background=ttmslogo_new.gif
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=ttms_banner.gif
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=C:\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ttmsmenu]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
width=500
height=500
background=no
form=ttmsmenu.fmx

Dumb dumb dumb.
I was running this form out of Form Builder 10g. At some point I changed the Application Server URL (Edit => Preferences => Runtime menus) from:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?config=ttmsmenu
to:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?
So my customized configuration with all the WebUtil references was not being referenced and I was getting the error.
Dumb dumb dumb.

ConfigurationException during deploy "CONFIGURATION FAILED! File not found"

Hello All,
The deployment of my adf app. is failing with the following error. Although till yesterday also, it was failing but atleast it was going much farther than this. What is causing this error? I did make changes to config.xml but then restored it. Any help is appreciated. This is critical.
####<Sep 14, 2011 1:23:36 PM CDT> <Info> <J2EE Deployment SPI> <brksvw379> <AdminServer> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <u00w669> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49> <1316024616200> <BEA-260121> <Initiating deploy operation for application, myProject [archive: F:\Oracle\Middleware\user_projects\domains\BPEL_DEV\servers\AdminServer\upload\myProject.ear], to AdminServer .>
####<Sep 14, 2011 1:23:47 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <u00w669> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49> <1316024627386> <BEA-149038> *<Initiating Task for myProject : [Deployer:149026]deploy application myProject on AdminServer.>*
####<Sep 14, 2011 1:23:50 PM CDT> <Info> <J2EE> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630053> <BEA-160170> <Imported library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 for Application myProject>
####<Sep 14, 2011 1:23:50 PM CDT> <Info> <WorkManager> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630069> <BEA-002903> <Creating WorkManager from "wm/SOAWorkManager" WorkManagerMBean for application "myProject">
####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module weblogic.xml.registry.XMLModule of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149060> <Module weblogic.xml.registry.XMLModule of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module empty.jar of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149060> <Module empty.jar of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module mySubProj of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
####<Sep 14, 2011 1:23:50 PM CDT> <Info> <HTTP> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630771> <BEA-101363> <Application: myProject, WebApp: mySubProj has context-root specified in application.xml: "mySubProj". The context-root specified in weblogic.xml: "mySubProj" will be ignored.>
####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024693171> <BEA-149060> <Module mySubProj of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module weblogic.xml.registry.XMLModule of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module weblogic.xml.registry.XMLModule of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module empty.jar of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module empty.jar of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module mySubProj of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module mySubProj of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
####<Sep 14, 2011 1:24:54 PM CDT> <Warning> <HTTP> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024694451> <BEA-101162> *<User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found.*
java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
     at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:294)
     at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
     at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:357)
     at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:227)
     at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: java.io.FileNotFoundException: File not found
at java.util.zip.ZipFile.open(Native Method)
     at java.util.zip.ZipFile.<init>(ZipFile.java:117)
     at java.util.jar.JarFile.<init>(JarFile.java:135)
     at java.util.jar.JarFile.<init>(JarFile.java:72)
     at com.sun.faces.facelets.util.Classpath.getAlternativeJarFile(Classpath.java:262)
     at com.sun.faces.facelets.util.Classpath.search(Classpath.java:115)
     at com.sun.faces.facelets.util.Classpath.search(Classpath.java:92)
     at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.loadURLs(MetaInfFacesConfigResourceProvider.java:159)
at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.getResources(MetaInfFacesConfigResourceProvider.java:107)
     at com.sun.faces.config.ConfigManager$URLTask.call(ConfigManager.java:1096)
     at com.sun.faces.config.ConfigManager$URLTask.call(ConfigManager.java:1064)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at com.sun.faces.config.ConfigManager.getConfigDocuments(ConfigManager.java:642)
     at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:309)
     at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:226)
     at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
I did some more research and found out that method loadURLs of class MetaInfFacesConfigResourceProvider.java is throwing IOException. Is this some kind of class path issue? Please help!
private Collection<URL> loadURLs(ServletContext context) throws IOException {
154
155 Set<URL> urls = new HashSet<URL>();
156 for (Enumeration<URL> e = Util.getCurrentLoader(this).getResources(META_INF_RESOURCES); e.hasMoreElements();) {
157 urls.add(e.nextElement());
158 }
159 urls.addAll(Arrays.asList(Classpath.search("META-INF/", ".faces-config.xml")));
160 // special case for finding taglib files in WEB-INF/classes/META-INF
161 Set paths = context.getResourcePaths(WEB_INF_CLASSES);
162 if (paths != null) {
163 for (Object path : paths) {
164 String p = path.toString();
165 if (p.endsWith(".taglib.xml")) {
166 urls.add(context.getResource(p));
167 }
168 }
169 }
170 return urls;
171
172 }
173
Edited by: user12054715 on Sep 14, 2011 2:13 PM

I did a couple of things ( gathered from various posts on OTN). I am not sure which one did the trick but the error is gone now. I am mentioning the steps that I took. Later when I have more time, I will narrow down to exactly what worked.
1. The following was missing from my web.xml (Thanks Rene!) Added it
<listener>
<listener-class>com.sun.faces.config.ConfigureListener</listener-class>
</listener>
2. Removed any mention of 'Anonymous-User' from Jazn-data.xml.
Application tab -> Secure -> Configure ADF Security -> Jazn-data.xml (source tab and removed block of code referring to anonymous user)
Hope this will help others.

For xml reports in ebs, if default font is not found, what does OPP do?

If the OPP is unable to locate a font file while merging an XML report in EBS R12.1.3 running on AIX (BI Version 5.6.3), what does it do? Is there a default set somewhere, and if so, can it be changed? Can it be changed only at the site level, or at the indvidual template level? Is there just one default or can you specify a different default for each font? Is there anyway to force the merge to error if the requested font is not found?

it's very difficult to say
you can seek some MOS for specific problem
IMHO
based on
Specific Special Characters Are Not Getting Printed In Pdf Output Format From XML Publisher Reports (Doc ID 1283873.1)
i try to suppose that some symbol will be incorrect without needed fonts and in OPP you can (may be) see some messages
based on
Slovak Characters Appear as Question Marks in XML Publisher PDF Output (Doc ID 1364992.1)
you can see question marks instead of characters

Corporate Directory - host not found intermitently

We have a new installation of a CUCM cluster (10.5.2.10000-5).
The phones are a 7821 and 8851.
Corporate directory was working fine but all of a sudden it just says Requesting... and then it says Host Not Found.
Then all of a sudden it will start working on some phones but on others it will still not work.
If we restart a phone on which it is working at the moment after reboot it doesn't work.
Does anyone have an idea how to fix this?
Regards.

Directories or corporate directories?
As for the status messages, you can find them from:
Settings > Status > Status Messages
I'm suspecting that the issue is with the Trust list:
Try deleting the Trust list from the IP-Phone by going to:
Settings (you will see a lock that is locked), unlock it by pressing **#
Once its unlocked proceed:
Security Connfiguration > Trust List > ITL File
Once reach this section you will see the ITL File(ITL File, CAPF Server,TVS, TFTP Server)
to verify if its the same files from you tftp servers(login to cucm) and issue the below command
show itl
admin:show itl
Length of ITL file: 5438
The ITL File was last modified on Wed Jul 27 10:16:24 EDT 2011
        Parse ITL File
Version:        1.2
HeaderLength:   296 (BYTES)
BYTEPOS TAG             LENGTH VALUE
3       SIGNERID        2       110
4       SIGNERNAME      76      CN=CUCM8-Publisher.bbbburns.lab;
                                OU=TAC;O=Cisco;L=RTP;ST=North Carolina;C=US
5       SERIALNUMBER    10      21:00:2D:17:00:00:00:00:00:05
6       CANAME          15      CN=JASBURNS-AD
*Signature omitted for brevity*
The next sections each contain their purpose inside of a special Function parameter. The first function is the System Administrator Security Token. This is the signature of the TFTP public key.
        ITL Record #:1
BYTEPOS TAG             LENGTH VALUE
1       RECORDLENGTH    2       1972
2       DNSNAME         2
3       SUBJECTNAME     76      CN=CUCM8-Publisher.bbbburns.lab;
                                OU=TAC;O=Cisco;L=RTP;ST=North Carolina;C=US
4       FUNCTION        2       System Administrator Security Token
5       ISSUERNAME      15      CN=JASBURNS-AD
6       SERIALNUMBER    10      21:00:2D:17:00:00:00:00:00:05
7       PUBLICKEY       140
8       SIGNATURE       256
9       CERTIFICATE     1442    0E 1E 28 0E 5B 5D CC 7A 20 29 61 F5
                                8A DE 30 40 51 5B C4 89 (SHA1 Hash HEX)
This etoken was used to sign the ITL file.
The next function is CCM+TFTP. This is again the TFTP public key that serves to authenticate and decrypt downloaded TFTP configuration files.
        ITL Record #:2
BYTEPOS TAG             LENGTH VALUE
1       RECORDLENGTH    2       1972
2       DNSNAME         2
3       SUBJECTNAME     76      CN=CUCM8-Publisher.bbbburns.lab;
                                OU=TAC;O=Cisco;L=RTP;ST=North Carolina;C=US
4       FUNCTION        2       CCM+TFTP
5       ISSUERNAME      15      CN=JASBURNS-AD
6       SERIALNUMBER    10      21:00:2D:17:00:00:00:00:00:05
7       PUBLICKEY       140
8       SIGNATURE       256
9       CERTIFICATE     1442    0E 1E 28 0E 5B 5D CC 7A 20 29 61 F5
                                8A DE 30 40 51 5B C4 89 (SHA1 Hash HEX)
The next function is TVS. There is an entry for the public key of each TVS server to which the phone connects. This allows the phone to establish a Secure Sockets Layer (SSL) session to the TVS server.
        ITL Record #:3
BYTEPOS TAG             LENGTH VALUE
1       RECORDLENGTH    2       743
2       DNSNAME         2
3       SUBJECTNAME     76      CN=CUCM8-Publisher.bbbburns.lab;
                                OU=TAC;O=Cisco;L=RTP;ST=North Carolina;C=US
4       FUNCTION        2       TVS
5       ISSUERNAME      76      CN=CUCM8-Publisher.bbbburns.lab;
                                OU=TAC;O=Cisco;L=RTP;ST=North Carolina;C=US
6       SERIALNUMBER    8       2E:3E:1A:7B:DA:A6:4D:84
7       PUBLICKEY       270
8       SIGNATURE       256
11      CERTHASH        20      C7 E1 D9 7A CC B0 2B C2 A8 B2 90 FB
                                AA FE 66 5B EC 41 42 5D
12      HASH ALGORITHM 1       SHA-1
        ITL Record #:4
BYTEPOS TAG             LENGTH VALUE
1       RECORDLENGTH    2       455
2       DNSNAME         2
3       SUBJECTNAME     61      CN=CAPF-9c4cba7d;
                                OU=TAC;O=Cisco;L=RTP;ST=North Carolina;C=US
4       FUNCTION        2       CAPF
5       ISSUERNAME      61      CN=CAPF-9c4cba7d;
                                OU=TAC;O=Cisco;L=RTP;ST=North Carolina;C=US
6       SERIALNUMBER    8       0A:DC:6E:77:42:91:4A:53
7       PUBLICKEY       140
8       SIGNATURE       128
11      CERTHASH        20      C7 3D EA 77 94 5E 06 14 D2 90 B1
                                A1 43 7B 69 84 1D 2D 85 2E
12      HASH ALGORITHM 1       SHA-1
If they dont match, go back to the below steps and erase the ITL File
Security Configuration > Trust List > ITL File
At this point you will see ITL File, there will be a more button.
press more and click on erase it will says "earsing CTL and ITL Files" and reboot

WebUtil 1.0.6 - GetClientInfo bean not found.

I'm using Developer 10g Version 10.1.2.0.2 and the latest available Webutil-package 1.0.6.
I installed all components and followed all the steps.
When I execute the form test of webutil: WU_TEST_106 open a window with:
oracle.forms.webutil.clientinfo.GetClientInfo bean not found.
WEBUTIL_CLIENTINFO.GET_JAVA_VERSION will not work.
I did all the recommendations of metalink, but nothing.
Please, I need your help.

By Edit - Preferences
?config=webutil , I did that, but the problem continue.
The configuration of files formsweb.cfg, default.env and webutil.cfg is:
FORMSWEB.CFG
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=C:\Oracle\Dev10g
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob.jar
archive=frmall.jar
lookAndFeel=oracle
# webutil.cfg - WebUtil default configuration file
# This file provides all of the configuration settings for webutil. These are
# divided into the following sections:
# 1. Logging Options
# 2. Installation Options
# 3. FileUpload and Download Options
# 1. Server Side Logging Options for logging errors and log messages
# You must set logging.enabled to true to allow mid-tier logging. Without this
# mid-tier logging will not take place no matter what PL/SQL or URL options
# are supplied to switch it on. Once logging is enabled the other settings come
# into play.
# Details
# logging.file : Defines the file name and location of the log file.
# Note that WebUtil does no log file management. You may
# need to manually clean this file up from time to time.
# logging.enabled : Can be TRUE or FALSE
# logging.errorsonly : Can be TRUE or FALSE. Setting to true will ensure that
# only errors and not normal informational log messages
# are written to the log file. For product use this would
# normally be set to TRUE
# logging.connections: Can be TRUE or FALSE. Setting to true will cause each
# connection from a client using WebUtil to write into
# the log as it sets up.
logging.file=
logging.enabled=FALSE
logging.errorsonly=FALSE
logging.connections=FALSE
# 2. Installation Options
# WebUtil needs to download some files to the client in order to perform
# certain integration operations such as OLE or Registry Access. These files
# are downloaded the first time that you access one of the functions that need
# them. You have to define the location of these files on the server
# Details
# install syslib.location : The virtual path to the directory holding the
# webutil library files on the server side. This
# must either be an absolute URL or a URL that is
# relative to the documentbase
# install.syslib.<os>.<package>.<n> :
# The name(s) of the libraries required for
# particular webutil beans. The format of this is
# name|size|version|showDownloadDialog. Multiple
# libraries can be downloaded per package. But
# ensure that the <n> values are consecutive and
# start at 1
install.syslib.location=/webutil
# Change size and version if necessary, like when upgrading the library.
# Normally this would not be required since most of these libraries come with
# install itself.
install.syslib.0.7.1=jacob.dll|94208|1.2|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
# You can also add your own libraries in here, e.g.
#install.syslib.0.user.1=testwebutil.dll|204872|1.0|true
install.syslib.0.user.1=ffisamp.dll|40960|1.0|true
# 3. Upload / Download options
# For the file upload and download options you can define the default locations
# on the server that webutil can use as a work area. Optionally you can switch
# upload and download off
# Details
# transfer.database.enabled : Can be TRUE or FALSE - allows you to disable
# upload and download from the database server.
# transfer.appsrv.enabled : Can be TRUE or FALSE - allows you to disable
# upload and download from the application
# server.
# transfer.appsrv.workAreaRoot: The root of the location in which WebUtil can
# store temporary files uploaded from the client.
# If no location is specified, Application Server
# user_home/temp will be assumed.
# This location is always readable and writable
# no matter what the settings in
# transfer.appsrv.* are. This setting is
# required if you need the Client side
# READ/WRITE_IMAGE_FILE procedures.
# transfer.appsrv.accessControl:Can be TRUE or FALSE - allows you to indicate
# that uploads and downloads can only occur from
# the directories named in the
# transfer.appsrv.read.n and
# transfer.appsrv.write.n entries and their
# subdirectories. If this setting is FALSE,
# transfers can happen anywhere.
# transfer.appsrv.read.<n>: List of directory names that downloads can read
# from.
# transfer.appsrv.write.<n>: List of directory names that uploads can write
# to.
#NOTE: By default the file transfer is disabled as a security measure
transfer.database.enabled=FALSE
transfer.appsrv.enabled=FALSE
transfer.appsrv.workAreaRoot=
transfer.appsrv.accessControl=TRUE
#List transfer.appsrv.read.<n> directories
transfer.appsrv.read.1=c:\temp
#List transfer.appsrv.write.<n> directories
transfer.appsrv.write.1=c:\temp
default.env
# $Id: default.env 14-apr-2005.13:22:43 pkuhn Exp $
# default.env - default Forms environment file, Windows version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value in the Windows registry
# will be used. If no value is found in the registry, the value used will
# be that defined in the environment in which the servlet engine (OC4J
# or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=C:\Oracle\Dev10g
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be semi-colon
# separated (e.g. c:\test\dir1;c:\test\dir2)
FORMS_PATH=C:\Oracle\Dev10g\forms
# webutil config file path
WEBUTIL_CONFIG=C:\Oracle\Dev10g\forms\server\webutil.cfg
# Disable/remove this variable if end-users need access to the query-where
# functionality which potentially allows them to enter arbitrary SQL
# statements when in enter-query mode.
FORMS_RESTRICT_ENTER_QUERY=TRUE
# The PATH setting is required in order to pick up the JVM (jvm.dll).
# The Forms runtime executable and dll's are assumed to be in
# C:\Oracle\Dev10g\bin if they are not in the PATH.
# In addition, if you are running Graphics applications, you will need
# to append the following to the path (where <Graphics Oracle Home> should
# be replaced with the actual location of your Graphics 6i oracle_home):
# ;<Graphics Oracle Home>\bin;<Graphics Oracle Home>\jdk\bin
PATH=C:\Oracle\Dev10g\bin;C:\Oracle\Dev10g\jdk\jre\bin\client
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications. In addition, you will need to
# modify the PATH variable above as described above.
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
#GRAPHICS60_PATH=
# Settings for Forms tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>\forms\server
# System settings
# You should not normally need to modify these settings
FORMS=C:\Oracle\Dev10g\forms
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# frmsrv.jar, repository.jar and ldapjclnt10.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=C:\Oracle\Dev10g\j2ee\OC4J_BI_Forms\applications\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;C:\Oracle\Dev10g\jlib\repository.jar;C:\Oracle\Dev10g\jlib\ldapjclnt10.jar;C:\Oracle\Dev10g\jlib\debugger.jar;C:\Oracle\Dev10g\jlib\ewt3.jar;C:\Oracle\Dev10g\jlib\share.jar;C:\Oracle\Dev10g\jlib\utj.jar;C:\Oracle\Dev10g\jlib\zrclient.jar;C:\Oracle\Dev10g\reports\jlib\rwrun.jar;C:\Oracle\Dev10g\forms\java\frmwebutil.jar;C:\Oracle\Dev10g\jdk\jre\lib\rt.jar
The files is in c:\Oracle\Dev10g\forms\server
Please, i can your help

Class not found exception for the startup class defined.

iam using weblogic server 10 and bea jrockit 1.5.0.12.
i have created a startup class in the admin console for a web project and i have deployed the war file using the console in a user defined domains, user project directory.
when i start the server, iam getting class not found exception for the startup class.
But, the startup class is available in the web archive (war). how should we add the classes and jars in the war to the classpath in setDomainEnv.sh or is there any other setting available in the console to enable this.

Hello Julius,
yes sure, we can move this post to the NW admin forum. I have already posted similar thread on sun forums. I was hoping that someone from SAP SDN already tackled this problem and if not someone specialized in J2EE Engine could troubleshoot me from the class problem I'm getting. I don't know if it's specific from the agent or if this ClassNotFound is a general SAP J2EE Engine error relating to a library not correclty defined.
Kind regards,
Tanguy Mezzano

Error:"The specified tag name was not found"

Hello:
My problem is the FieldPoint error message in LabWindows/CVI v6.0.
When hook up with Ethernet module(FP-1600), NO Problem on the source code, specially item Name "All". See the actual code.
if(status = FP_CreateTagIOPoint (ServerHandle, resourceName, deviceName, "All",&IOPointHandle))
But When hook up with RS-232C Module(FP-1000), occured error. The error code is 32812, that means "The Specified tag name was not found."
What makes this error? Why item name "All" makes the error when using FP-1000?
Please help me.
Thank You.

Make sure the resourceName and deviceName match what is in FieldPoint Explorer. See the following KB:
http://digital.ni.com/public.nsf/websearch/02EB73D02715981A8625682B00774F8F?OpenDocument
Also, I have seen this error when targetting serial modules with FieldPoint Explorer open. Make sure FP Explorer is closed.

Special GL not found in OBYR

Similar Messages

Maybe you are looking for