Special stock indicator for the sales order (VBAP-SOBKZ=)

Dear All,
I am getting a warning message while making an initial entry of stock with Mov.Typ : 561 and Special Stock Indicator (E), i.e., "The special stock indicator for the sales order (VBAP-SOBKZ=)is different from the special stock indicator in the goods movement.
The system is allowing to post the initial entry of goods but when I am trying to do a PGI, it is throwing an error saying that, deficit of stock in the specific storage location.
Can anybody help me out with this problem ?
Reward points shall be awarded.
Rgds,
Indrajit Dey

Hi Indrajit,
Please post the stock with Special Stock Indicator (E), and againest sales order and item.
Go to MB1C transaction enter Movement type,Plant and special stock indicator E.
After that you enter Sales order Number and Item then save the document.
Noe you try to do PGI,
I hope it will help you,
Regards,
Murali.

Similar Messages

  • How to avoid special stock indicator for intercompany sales transitions.

    Hi Friends
    I have an issue Intercompany sales .if I  enter intercompany plant(Delivering plant) in the sales order system is taking special stock indicator and looking for sales order stock.
    If I enter company code plant for sales from unrestricted stock, system is not taking special stock indicator.
    Please advice how to avoid special stock indicator for intercompany sales transitions.
    Thanks in advance.
    SRK

    Ravi,
    Special stock is generally determined by the MRP strategy group in the material master of the plant against which you place your order.  The strateg(ies) contained in the strategy group will determine the SO requirements type, which will in turn determine whether or not the order is 'account assigned' (special stock).  
    It is normal to only have one strategy contained in a strategy group.  However (and I seldom recommend this) SAP will support multiple strategies within one strategy group.  In this case, you could have both MTS and MTO orders against the same plant/material, by manually altering the requirements type in the sales order.  This scenario is usually difficult for a planner, and involves additional manual attention to make everything work.
    I suggest that your first avenue is to change the Strategy group in the material master of the delivering plant to one that supports MTS.  This has a big impact in Controlling and in Production Planning, so ensure that all affected functional groups are aware of what you are doing, and of the resulting changes that they will experience.  The transition from MTO to MTS must be carefully controlled.
    If you are not a PP expert, I suggest you consult with your local PP expert before embarking on this change.
    Best Regards,
    DB49

  • Special stock indicator in the OD (goods movement  data tab)

    Hello SAP Experts,
    I would like to ask on how the special stock type indicator field (LIPS-SOBKZ) in the outbound deliveries, under the goods movement data tab, can be populated? For example, with stock type indicator E.
    Are there any configs or master data settings that allow the population of the stock type in the ODs? I'm just wondering why we have some ODs (replenishment deliveries) that are having the special stock indicator E, but sometimes, this field is empty. I would like to know what are the factors that allow the special stock type indicator field to be populated.
    Thanks in advance!

    On the SD side, the special stock indicator on a delivery line item is copied from the sales order line item.
    And the special stock indicator on the sales order line item is determined from the item category.
    If you are referring to the MM side of things, (and based on your description of the use of the 'replenishment deliveries you might be), then there probably are corresponding configuration on the MM side of things.
    Matthew
    +1 (707) 276-6473

  • CO07 and special stock indicator for components

    Hello,
    My final purpose is to be able to call components from project stock in production orders without header material, created in CO07.
    I notice a strange behavior and would be glad to recieve some explanations.
    Production orders are assigned to a WBS. If I indicate the WBS in the CO07 selection screen, the special stock indicator for the components is determined as expected:
    If view MRP 4 for the component says "Individual requirements" then special stock indicator is set to "Project stock"
    If view MRP 4 for the component says "Collective requirements" then special stock indicator is set to "Common stock"
    Second scenario is that I don't provide the WBS in the CO07 selection screen, but provide it in the assignment tab later. In this case, the special stock indicator for components will always be empty (common stock) by default, without any possibility to modify this manually.
    Is anybody able to explain me why?
    Merry Christmas to all.

    Hi!
    Actually it is not related to SAP Manufacuting Execution solution - so you'd rather re-post the question to ERP-related forum. This can help you find a proper one.
    Regards,
    Sergiy

  • Special stock indicator for component in process order

    Hi,
    There is a field in process order where we can maintain special stock indicator for component.
    In this filed if we define consignment stock, then the vendor field becomes activated, where the vendor can be given.
    Now we want to maintain the data as a master data so that whenever process order is created the sp stock indicator as well as vendor are populated for that particular component.
    Q - where to define this master data. I could not see such fields in BOM?
    regards,
    Mohit

    Hi Sunderesan,
    Thaks for responding. Even by doing this system does not propose special stock indicator as '3' in process order & even vendor is not proposed.
    My requirement is that system should propose '3' in special stock indicator in process order.
    Request to look into this.
    regards,
    Mohit

  • Storage Location Error duing GR of Subcontarct for The Sales Order Stock.

    HI ,
    Is there any settings  to avoid individual entry of Storage Location field for the child components during  the  Goods Receipt from Subcontractor  for the Sales Order Stock.
    As per SAP standard , I have created Separate storage location for Sales order stock components as the Stock provided to vendor  . While receiving the header component , System showing error to enter storage location for all the BOM component s .  My Requirement is , Storage location should come automatically for the child component while receiving the Header Component.
    Yogesh.K.

    Hi Jurgen,
    He's right, the posting is not a bug.
    In case of MTO scenario, if components are managed in the sales order / project stock system withdraw them from storage location.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90b043ad11d189410000e829fbbd/frameset.htm
    The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt.
    Since the components are not transferred to the "stock of material provided to vendor", we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks.
    Cs.
    Edited by: Csaba Szommer on Jan 5, 2010 7:17 PM

  • Message: Stocks already exist for the sales order

    Hi Gurus,
    I am trying to change the material valuation class in MM02. I am getting an error Stocks already exist for the sales order. Even though there exists no stock. SAP note suggests to make this error message as warning message. Could you pls help me to know the message class and number?
    Thanks
    Shashi

    Jürgen,
    Yes, you are right. SAP, unfortunately does not tell that stock does not exists in current or previous period. As I consultant, I have assured that there exists no stock in current and previous period. However, I am not sure, still why this message is thrown. Its checked in MD04 that nothing is assigned to material and in MMBE no stock exists. We shall take care of this Sales order that it is not used after changing the valuation class but now I need to know what is the message class and number for that error. Suggestions would be much appreciated.
    Shash

  • How remove Special stock indicator for dialog in PO componet overview

    Hi
    I am creating production order with reference to the sales order (MTO) after creating the production order in component overview special stock indicator is default value is u20181u2019, plz any one suggest How remove Special stock indicator for dialog display in production order component over view, I have already maintained in MRP 4 Dependent requirements ind. for individual and coll. Reqmts as u20182u2019
    Thanks
    Mohan M

    Did you maintain the indiv/ coll indicator as 2 after the creation of planned order / production order? If yes, then re-create the order & then check.
    If not, then check in BOM Item details if you have maintained them to be as individual.
    Check & revert.

  • Stock reserved against the Sales ORder is not valuation in MC.9.

    Dear Experts.
    The valuation done in Mc.9 doesnot match with MB5B -valuated Stock. We are having export material , which is make -to-stock scenerio. In this as soon as the production confirmation is done, the stock is alloted to the specified Sales Order.
    The stock alloted to the Sales order doesnot get valuated in MC.9 report, where as the same can be seen in MB5B .
    For Example.
    MAterial - XYZ is in stock in storage location FG01 - 156 EA
                                     against Sales ORder                -  206 EA
                                    Total Stock valuated in MB5B    - 362  EA     whereas in Mc.9 it valuates for only 156 EA.
    Can any body guide .
    Thanks
    AVS

    Hi,
    In MC.9 stock is displayed based on periods in the selection screen
    Please make sure you are slecting proper period
    Thanks
    Diwakar

  • Stock movement in the sale order

    Hi Gurus,
    Can any one explain me how to configure the stock movement in the sale order. Our client has MTO and MTS types of production process. For MTO, once production process completed stock will come to the sale order. In case of MTS, when sale order created system is considering the stock lying in the unrestricted use. Instead of this we would like to have the validation such that first user should move the stock from unrestricted to sale order. ( here system should not consider materials lying in the unrestricted use).
    Kindly let us know the processing steps for MTS scenario.
    Regards,
    Madhu

    Hi,
    Please goto the links given below
    Re: Different Method to valuate sales order stock
    Re: Reserving the sales order stock
    http://www.sapfans.com/forums/viewtopic.php?f=9&t=40409&start=0&st=0&sk=t&sd=a
    I hope this will resolve your issue
    Thanks
    Anil Hooda

  • How can I enable the Special Stock Indicator in the source list?

    Hello Gurus,
    How can I enable the Special Stock Indicator in the source list? This can be found in the Maintain source list detail screen, source group and beside the order unit. Even I am in the create or in change mode, still the indicator can't change
    Thanks!

    OSS note 668764 explains that the special stock indicator field is a display only field and cannot be changed in the source list. it is only taken over from a scheduling agreement.

  • How I can get the Billing Type for the sales order and its items

    How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

    Hi,
    You need to use two tables.
    First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
    Then use the billing document numbers in table VBRK, where in you can get the billing document type.
    Regards,

  • How to populate the billing plan tab for the sales order inbound

    Hi Team,
    I am new to IDOCS, I have a requirement like IDOC extension of the sales order inbound.
    Can anyone explain in brief how can i add billing plan tab in  the IDOC extension for the Sales order inbound.
    Thanks, 
    Barathi

    U need to use the table vbfa or fololow thw link
    [http://www.erpgenie.com/sap-functional/sd/read-sales-document-flow-using-a-function-module]

  • Enable the approval workflow for the Sales Orders (Standard)

    Dear All,
    I need to enable the approval workflow for the Sales Orders (Standard). How can I do this? Please update
    The version of apps is 11i
    many thanks in advance...
    Edited by: santark on Oct 27, 2010 3:47 PM

    Dear All,
    I need to enable the approval workflow for the Sales Orders (Standard). How can I do this? Please update
    The version of apps is 11i
    many thanks in advance...
    Edited by: santark on Oct 27, 2010 3:47 PM

  • Complete delivery indicator in the sales order header level

    my order quantity is 10 and having the complete delivery indicator in the header level
    Complete delivery indicator in the sales order header level
    when i am doing the partial delivery i got below error
    Delivery quantity is less than quantity of 10 PC assigned to batches
    this is warehouse linked.
    Please let us know how to do the partial delivery.
    when i click on the bacth icon to reduce the quantity it is greayed out.
    is there any posiblity to reduce the quantity in the transfer order
    Please do the needfull
    thanks
    Raju.

    Hi
    Usually this Complete delivery indicator flow from Customer master data. you need to change this data in Customer Master
    Sales Area Tab under Shipping view Remove the Complete delivery indicator, also in Partial delivery per item keep the field Blank ( Partial deliveries allowed )
    I hope this will solve your issue
    Award if useful to you

Maybe you are looking for

  • Unhandled exception occurred during the execution of the workflow instance

    I had a workflow and library working with no issues, but had to move the library and export the workflow to another subsite (though on the same web site/collection).  I followed these how-tos: http://msdn.microsoft.com/en-us/library/office/jj819316%2

  • Hyperion Planning business rules migrating to Calc Manager issue

    It was suggested I post this in calc manager as well, so I hope cross posting is allowed! We are trying to migrate from Hyperion Planning 11.1.1.3 to 11.1.2.2 Our business rules were migrated to Calc Manager by our IT team. The rules run (for the mos

  • PXI-6624 custom device

    Hello, Sorry for my bad english. I start with the custom device. I want use two PXI-6624 with Veristand for counter I/O. So I try to creat two easy custom device, one for each card. The program is ok in Labview, the Configuraton/Engine build too. I c

  • How do I update the RAW plug-in in CS5 so that it works with my Canon EOS700D?

    I have downloaded and installed version 7.4 of DNG but CS5 still shows a previous version.  Just to make sure, I opened CS5 as an Administrator ans I did when installing DNG 7.4, but CS5 still shows an earlier version (6.7.1.340).

  • Clear a buffer

    I have a buffer that is generating 5 min worth of data and feed it to a queue. The data is later dequeued into a seperate while loop and plot in a graph. My goal is programmatically refresh the buffer. I tried to used flush queue after the data is be