Special stock partner data problem in ERP system during "Post Goods issue"

Hi all,
I have a (probably) customizing issue in an ERP 6.0 EhP4 test system which not occurs in the ERP 6.0 test system. There is a difference but no one could tell me, what causes the problem in this scenario:
I have two customers, C1 and C2. C2 is the special stock partner (SB) of C1.
I've created a Consignment Fill-up order, then a delivery document based on the order and posted it with "Post Goods Issue". During the update process, a function module (SD_PARTNER_UPDATE) receives partner data in an internal table which contains the sold-to, ship-to and special partner data.
When we tried the same process in the ERP 6.0 EhP4 test system then special-partner data did not occur in the parameter table (I've used the same customers and materials). The special stock partner is probably not taken into consideration due to some customizing settings.
My question is what should I change in the customization to run the process the same way as in the ERP 6.0 system? As far as I know there are no new modifications which have effect on this area, and the used test customers and materials are almost the same - there are no noticable differences.
Thanks in advance.
Akos

I tried setting that field in the sale order this morning.  By defaulting it to "C"; I was able to get warning message for TAE line.  I was able to post goods with TAE and TAQ, being different quantities.  I need the check to determine if TAE and TAQ delivery quantity are different.  Using this fields seems to be line specific.  Thanks for the suggestion.  I now know what that field does to the delivery.
I rewarded points.
Thanks,
Tony

Similar Messages

  • Special Stock Partner

    Hi Gurus,
    What is the purpose of  Special Stock Partner in Sales orders related to consignments.

    Dear Anand
    A special stock partner has been defined for processing consignment stock by means of a third party rather than the customer. This means that all special stock for a particular customer is managed under one partner. It makes sense to use the special stock partner if the customer is using decentralized order processing but manages consignment stock centrally.
    If you want to process your consignment goods using a special stock partner, you need to:
    - Create a customer master record for the special stock partner (account groups 0001 and DEBI are defined for this purpose in the standard version of R/3)
    - Enter the special stock partner in the relevant customer master record on the partner screen using the partner function SB.
    When you create an order for this customer, the system automatically proposes the partner function SB in the document header and the document items. Consignment goods which have been entered in a consignment fill-up are always posted to the stock of the special stock partner when goods issue is carried out.
    You can also enter the partner function SB manually in the document header or in the relevant items if a special stock partner is required and is not proposed from the customer master record. If a special stock partner does not exist in the document header, inventory management is carried out using the sold-to party.
    thanks
    G. Lakshmipathi

  • Copy Special Stock Partner Automatically from Ship-To in Sales Order

    Dear SD GUru,
    I have an issue here which needs help.
    In my partner determination, I have configured SB to be a copied Ship-To which is working now.
    So, each Ship-To has its own Special Stock Partner.
    In my consignment issue sales order, I do change the defaulted Ship-To to other Ship-To but the old "SB, Special Stock Partner" will still remain in the consignment issue order and will not change according to the new Ship-To automatically.
    Any way to make the system to refresh without manual intervention?
    Thanks,
    Soo

    Hi,
    If I am not wrong then below is the situation which you are facing:
    1. You have a sold-to-party which has multiple ship-to-parties, right or worng ?
    2. Every ship-to-party has it's own special stock partner , right or wrong ?
    Now, if first two points are right then, you might be getting a pop-up for selecting the special stock and ship-to-party partner function once you put the sold-to-party in your consignment-issue. Now, this is the point where you can select the ship-to-first and then system would automatically determine the special stock partner from the selected ship-to-party record.
    Let me know about this if my understanding and the solution is correct or not.
    Hrishi

  • How to create Special Stock Partner SB in Business Partner BP

    I dont see the option SB in partner function while trying to add special stock partner in partner function of customer master (Tcode BP). Is it possible? and can it be used in SD? I have used partner function in tcode XD01 but this is the first time using tcode BP. can someone please explain me the steps. The special stock partner i m trying to add to orignial customer master is set to SP. Customer master has BP and payer already added to partner function. thanks.

    Thanks for the reply Mastan Shaik.
    I actually need to create a special stock partner for consignment and add it to the Business Partner master record in partner function. I have done that using XD01/XD02 but never used Tcode BP for creating a special stock partner and adding in partner function of Business partner / customer master. .
    I have a BP master (created using tcode BP) which has a separete Bill to and Payer alraedy added to its partner function (also in BP), but when i try to add special stock partner (created as a Sold to) to the master in partner fucntion i dont see partner function SB (for special stock partner). how can i add special stock partner to customer master?
    Can you also tell me what is the difference using XDxx or VDxx tcode and BP tocde for creating customer master.
    Also can you assign a business partner specifically for Consignment in BP master record somehow (assuming special stock partner not added to partner function of customer master?
    Thanks and sorry for being too long.
    Danny

  • Actual goods issue date required to be equal to planned goods issue date

    Hi All,
    Can anybody tell me on what basis does the actual goods issue date get determined and what needs to be done if we want to restrict the actuall goods issue date to be equal to the planned goods issue date?
    Avinash

    Avinash,
    Can anybody tell me on what basis does the actual goods issue date get determined
    ???? It is the date that the goods are actually issued from stock, e.g. whatever the date was when the delivery was actually issued, that is the date that is normally written to this field in the delivery.
    what needs to be done if we want to restrict the actual goods issue date to be equal to the planned goods issue date
    That's a pretty restrictive criteria.  Basically, you are telling the warehouse that they are not able to issue the goods early or late.  In companies I have seen, that would constitute a lot of deliveries.  Hope your customers don't need the parts....
    Anyhow, the restriction would have to be against the goods issue transactions being used by the warehouse.  I don't believe there is any standard configuration that creates such a restriction, so it would require custom development.  If you pursue this restriction, make sure you leave yourself some kind of override.
    In many companies, this problem is handled through policy and procedure.  Warehouse manager simply creates a policy about early and late goods issues.  The system will track discrepancies in the case the policy is not followed.
    Best Regards,
    DB49

  • How to validate Expiry Stock at Outbound Delivery level instead of checking at Goods Issue?

    Hello Everyone,
    The client wants us to validate Expiry Stock at Outbound Delivery level instead of checking at Goods Issue?
    What is the solution for this?
    Regards,
    Anwar

    Hi Moazzam Sir,
    I'm sorry for not explaining in detail. Actually, I posted the issue in a hurry. I apologize.
    Actually, the client has materials which has expiry date. They use Batch Management. They maintain expiry data (90 Days) in Shelf Life Expiration Date. Their requirement is: User is creating sales order in VA01. Then, he creates Outbound Delivery (OBD), then PGI. They want system not to create OBD, if the material has expired. They want some error message to be thrown whenever user is trying to create OBD for expired stock.
    Regards,
    Anwar

  • How to fetch post goods issue date and sales order creation date

    Hi All,
    How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
    Please let me know the solution .
    Thanks in advance.

    Hi,
    Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
    after saving ur sales order...when u raise the Delivery using VL01n  w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
    You can the fetch the values using tables-  Use T code   SE12  or SE16
    Vbak-----order header
    Vbap-----order item
    Vbek-----order schedule line
    Likp-----Delivery header
    Lips----Delivery item

  • Exception in CRM system after creating post goods issue in ECC

    Hi Folks,
    We are facing an issue in CRM system. I will tell the scenario in details so that it would be helpful to understand,
    We are creating sales order in CRM system and it got replicated to ECC correctly. We have maintained action definition to trigger email to the customer.
    Then we will be creating delivery and then post goods issue(PGI) for items replicated to ECC systems. After PGI system will update the status in CRM sales order and here configured an action definition to trigger an email to customer.
    We have created custom badi implementations for action definition execute badi to send email. Emails are triggering correctly but after PGI creation while replicating the changes from ECC to CRM we are getting an exception in standard code because PPFTTRIGG table does not have entry. We have failed entry in CRM inbound queue and then did some debug and come to know the place of issue. Help me out with some inputs here.
    Best Regards,
    Dharmakasi.

    Hi,
    I have identified one thing here, if the action definition does not have start condition system is not updating that entry in PPFTTRIGG table. Here i got 2 questions my mind
    1. Why system is not updating the table with all the action definitions available in action profile
    2. Why system is looking for the entry which was not updated in PPFTTRIGG table?
    I do not understand problem with updating table or with action profile itself. Please give some input here. If we deactivate all the definitions which does not have start condition then there is no error.
    Best Regards,
    Dharmakasi.

  • Post Goods Issue of Vendor Stock

    Hello.
        I have configured Vendor Consignment in an ECC 6.0 system. I have setup up the material, info records ,etc. I am able to create Vendor stock from a goods receipt to a PO.
        I have vendor stock which I can pick for a delivery. When I post goods issue I am getting the error VL 604 The storage Location is not defined for delivery item 0010. The stock I am attempting to PGI resided in the Vendor location. How do I get the delivery to find/acknowledge the vendor location? What configuration am I missing?
    Thanks In Advance for the help,
    Bob Berneck

    Hello Bob
    Since Consignment stock is vendor owned material, I think you need to withdraw, bring it into your own Unrestricted use stock before PGIing it on a Delivery. Or am I mis-oversimplifying your issue?

  • Post goods issue problem

    Hi,
    We are using program WS_MONITOR_OUTB_DEL_GDSI to post goods issue deliveries in the background. We have this program set up as a background job to run regularly. The problem is that it does not allow you to specify the desired post goods issue date when it is run in the background (in the variant). However if we run it in the foreground you are prompted for the actual post goods issue DATE.
    Are there any other programs / solutions?
    Rgds,
    Finbarr

    Hi Lilly,
    Yes we tried that initally. However the dates in the inital screen of WS_MONITOR_OUTB_DEL_GDSI are for selection criteria only. Unfortunatlelt there is not an option for default GI DATE when you process in the background. I am currently checking OSS but cannot see any relevant notes for this issue in Version 4.7.
    Thanks for you reply,
    Rgds,
    conor

  • Stock Transfer Order & Post Goods Issue

    Hi Friends,
    Can any one explain me what is Stock Ttransfer Order why we need it? and
    What is Post Goods Issue and why we need it?
    Can any body explain me  in eloberate.
    Regards,
    DVNS.

    Hello,
    Stock Transport Order (STO) is a Purchase Order of type 'UB' created for trasnferring stock between two plants (which can belong to same or different company codes). In STO pricing schema, you can set up different conditions such as freight, surcharge etc. to charge the receiving site.
    A delivery document is created for the sending site which needs to be posted through Post Goods issue step in order to deduct stock from the site. Then the stock will be in transit until it is received by the Receiving site. The receiving is normally carried out with reference to the delivery document.
    Thanks,
    Venu

  • The special stock partner number is different in VA02 and VA03

    **Hi friends,*
      *its little bit critical*
          *my client raised Sales order and it was processed for delivery and billing also. now when we open sale order XYZ   in VA02 i.e, change mode There is special partner number is 189011 it is correct.*
    *and when we open same sale order XYZ  in display mode (VA03)  here The special partner number is changed and system showing ship to party number as a Special partner that is b1b1 actually it is ship to party number but system showing same number for both sp and sb as b1b1 thats is in VA03.*
    *can anybody please help out me

    Hi,
    Please check whether you have any screen variants / transaction variants assigned to the Tcode VA03.  The following thread will give you info about transaction variants in VA03.
    VA03 and SHD0 made me crazy
    Regards,
    P Gomatheeswaran

  • Problem with P45 Platinum during POST

    Good day! 
    I have MSI P45 Platinum mainboard and from to time to time it freezes during POST with AMI bios POST code - 423C. This happens right after the message that "4096MB OK" and before the detection of SATA/IDE drives.  When this happens, the only way to make the system run is to turn off the power (pressing Ctrl-Alt-Del of Reset would result in the same error)  - after that the POST procedure finishes correctly and I don't experience any problems afterwards (system is rock-solid after POST completion).
    So my question is - can anyone explain me what does this post code mean (D-Leds are not much of a help)? Is this a mobo problem or may be there is some kind of incompatibility with my hardware. I should mention also that I've tried all versions of Bios both official and beta without any success.
    This problem does not trouble me that much (doesn't happen often), but still I would like to understand what may cause it.
    P.S. My system config - iC2D E8300/MSI P45 Platinum/4x1Gb DDR2-800 Geil Black Dragon (5-5-5-15)/MSI Radeon 4870 1Gb OC edition/HDD 250 Gb WD + 120Gb Seagate/SB Audigy 4/DVD-RW Asus 1814/PSU TT Toughpower 700w (w0105)
    Thanx in advance and please excuse my poor English   

    Thank you for the reply! 
    Quote from: Jack the Newbie on 16-December-08, 06:39:42
    What is your current BIOS Version?
    I've recently flashed the latest beta bios version - 1,5 beta 6... but it produces the same error as did the latest official bios v1.4 
    Quote from: Jack the Newbie
    Does the same problem occur with only one memory module installed?
    I don't know actually. But thanks for pointing this out  - I will test the system with one (and then with two) module(s). I've tested the modules with the memtest86+ software (the latest version, which supports P45 chipset) several times and it showed no errors. So the modules are OK and they worked without any problems with my previous mb (Gigabyte P35-DS3).
    Quote from: Jack the Newbie
    What do the POST-Status LEDs of the board tell you, when the system freezes at the described stage?
    Well, I guess I don't fully understand what does the combination of LEDs tell during the freeze. I'll try to describe the combination -
    LED12 - OFF           LED13 - GREEN
    LED8 - RED             LED7 - OFF
    LED14 - OFF           LED10 - GREEN
    LED15 - RED           LED11 - OFF
    In mobo's manual this diagnostic LEDs are grouped in 4 groups and the description of the group that most closely resembles my case is - "Testing base and Extended memory etc." But I'm not sure that I'm identifying the problem correctly, because of the LEDs that are OFF.
    Quote from: Jack the Newbie
    Are you experiencing any freeze and/or stability problems appart from the described problem?
    No, as I said in my initial post, once it get past this stage everything is running smoothly - OS boots and all software, including the most demanding games or tests, are running OK.

  • Item of sales order is so repeated post  goods issue that stock is negative

    dear expert:
    the stock value of  sales order is negative ,because the goods is post twice,i donn't know what' cause of question  .in schedule line of sales order ,order quantity is 1, confirmed qty 1,deliveried qty :2.
    so mska-KALAB is -1.
    please help me analyse it .
    best regards

    Check your other thread on the same subject
    [sales order is deliveried but stock is negative   |sales order is deliveried  but stock is negative;
    thanks
    G. Lakshmipathi

  • Locking problem in VL02N at the time Post Goods issue

    Hi,
    We have implemented 2 BADIs to change qty in delivery and in subsequent documents. Once we receive an IDoc with batches, then we need to change subitems qty according to no of batches.
    Once IDoc has updated, then PGI will do automatically.
    1. LE_SHP_DELIVERY_PROC     - Change qty in delivery (Method SAVE_DOCUMENT_PREPARE)
    2. LE_SHP_GOODSMOVEMENT - Change qty in material document.
    Now, we have a locking problem at the time of posting.
    Please let us know, due to these BADI implementation this problem or any other cause? And provide required to solve this problem.

    hi ,
    do i need to do step 2....?
    i dont think u need step2 ( change qty of MBLNR),bcos ,
    say ur Del.qty is 100, now u want to do del. of 50, then just u will change its qty & do PGI ? so whats the need of changing MBLNR.
    while doing PGI , program will take changed qty of del. only ?
    let me know if i'm wrong.
    regards
    Prabhu

Maybe you are looking for