SPECIAL1 user defined Trigger not firing in Forms

Hi All forms Gurus,
I have a need of creating a menu under tools in forms and call another from from this new menu option.
I have done the below:
on my block I have written a PRE-BLOCK Trigger with the below code:
app_special.instantiate('SPECIAL1', 'Product Details');
app_special.ENABLE('SPECIAL1',PROPERTY_ON);
this is creating the menu option successfully on the forms at run time under TOOLS menu.
Next I have :
FND_FUNCTION.EXECUTE(FUNCTION_NAME => 'XXTEST'
,OTHER_PARAMS => ' P_PROD_CODE = ' || ''''|| :HOLDS_BLK.PROD_CODE
and this is not getting executed when I click on the "Product Details" new menu entry which is create above.
I even tried just putting
fnd_message.debug('from SPECIAL1'); to check if the SPECIAL1 Trigger is firing, removing the above FND_FUNTION.EXECUTE.
and I noticed that the SPECIAL! Trigger is not firing at all.
I would really appreciate if you can help me out in fixing this and making the SPECIAL1 trigger fire.
Thanks and Regards
Rohit

Hi Rohit,
Welcome to OTN.
Since this is Apps issue, you might want to post it in the [E-Business Suites forum|http://forums.oracle.com/forums/category.jspa?categoryID=3].
-Arun

Similar Messages

SPECIAL1 user defined trigger not firing

Hi All forms Gurus,
I have a need of creating a menu under tools in forms and call another from from this new menu option.
I have done the below:
on my block I have written a PRE-BLOCK Trigger with the below code:
app_special.instantiate('SPECIAL1', 'Product Details');
app_special.ENABLE('SPECIAL1',PROPERTY_ON);
this is creating the menu option successfully on the forms at run time under TOOLS menu.
Next I have :
FND_FUNCTION.EXECUTE(FUNCTION_NAME => 'XXTEST'
,OTHER_PARAMS => ' P_PROD_CODE = ' || ''''|| :HOLDS_BLK.PROD_CODE
and this is not getting executed when I click on the "Product Details" new menu entry which is create above.
I even tried just putting
fnd_message.debug('from SPECIAL1'); to check if the SPECIAL1 Trigger is firing, removing the above FND_FUNTION.EXECUTE.
and I noticed that the SPECIAL! Trigger is not firing at all.
I would really appreciate if you can help me out in fixing this and making the SPECIAL1 trigger fire.
Thanks and Regards
Rohit and Zahir

Hi Rohit,
Welcome to OTN.
Since this is Apps issue, you might want to post it in the [E-Business Suites forum|http://forums.oracle.com/forums/category.jspa?categoryID=3].
-Arun

WHEN-NEW-ITEM-INSTANCE TRIGGER NOT FIRING IN FORM PERSONLIZATION

We are upgrading to R12, when-new-item-instance trigger written for radio group not firing. using USO-821 Order Administrator Responsibility the function order capture.After clicking on actions push button
opening Copy Quote for this Form Personalization written.
For Radio Group Copy-Group when-new-item-instance trigger written but this trigger not firing,but In 11i Instance its Firing.
trigger-event: when-new-item-instance
Trigger-object:copy_group
condition:when copy_group='ALL'
Action: showing message.
The same when-new-instance trigger written in form item level and trigger execution hierarchy properties 'OVERRIDE'.
Just I am thinking this overriding by Item level trigger of form.
Please kindly help me quickly .What I need to do?
How can I make trigger to Fire?
Please kindly give solution.....Its very urgent Requirement.pls help me.
Regards,
Basavaraj

Please kindly help me quickly .What I need to do?
> Please kindly give solution.....Its very urgent Requirement.pls help me.
Kindly log a SR for urgent issues.
Thanks,
Hussein

WHEN-NEW-ITEM-INSTANCE TRIGGER NOT FIRING IN FORM PERSONLIZATION(R12 UPGRAD

We are upgrading to R12, when-new-item-instance trigger written for radio group not firing. using USO-821 Order Administrator Responsibility the function order capture.After clicking on actions push button
opening Copy Quote for this Form Personalization written.
For Radio Group Copy-Group when-new-item-instance trigger written but this trigger not firing,but In 11i Instance its Firing.
trigger-event: when-new-item-instance
Trigger-object:copy_group
condition:when copy_group='ALL'
Action: showing message.
The same when-new-instance trigger written in form item level and trigger execution hierarchy properties 'OVERRIDE'.
Just I am thinking this overriding by Item level trigger of form.
Please kindly help me quickly .What I need to do?
How can I make trigger to Fire?
Please kindly give solution.....Its very urgent Requirement.pls help me.
Regards,
Basavaraj

Please kindly help me quickly .What I need to do?
> Please kindly give solution.....Its very urgent Requirement.pls help me.
Kindly log a SR for urgent issues.
Thanks,
Hussein

How to create a user defined trigger and execute my form

Hi All,
I am working with oracle Apps r12 and oracle forms 10g.
I have created a custom form. So i need to create a special menu and when the user click the menu it need to open a new block and query it accordingly.
I have followed this link
http://egeapp.egeseramik.com:8000/pls/prod/fndgfm/fnd_help.get/us/fnd/@g_special#g_special
and created a special menu in my custom form
In PRE_FORM trigger i have coded this
APP_SPECIAL.INSTANTIATE('SPECIAL3','&ACTION HISTORY DETAILS',NULL,TRUE,'LINE');
and IN PRE_BLOCK i have coded this
APP_SPECIAL.ENABLE('SPECIAL3',PROPERTY_ON);.
Now the special menu is enabled when i press it shows error
that frm-40700 no such trigger:special3.
Now i came to know that we need to create a user defined trigger put the code and when we press special menu it need to query it accordingly.
Can any one tell the steps that how to do that accordingly.
Thanks & regards
Srikkanth

Hi ,
The problem is fixed, the link mentioned below might be use full for doing this.
http://docs.oracle.com/cd/E18727_01/doc.121/e12897/T302934T457083.htm
regards
Srikkanth

SBO crashes on changing user defined field setting for a form

Hi,
when i try to change the user defined field settings(Tools->User-Defined Fields->Settings) for a form, say Sales order form, on clicking on OK button SBO crashes displaying runtime error messagebox.
This happens only when my addon is running.
Anyone encounter this behavior?
Thanks,
Satish.

Hi Barend,
I have put in the filters.The form 38(user-defined fields settings form) is not included in the filters.So it should not get any events. I get the following error
Microsoft Visual C++ Runtime Library
Runtime Error!
Program ..m Files\SAP Manage\SAP Business One\SAP Business One.exe
This application has requested the runtime to terminate it in an unusual way.Please contact the application's support team for more information.
Thanks,
Satish.

How to send a user defined parameter to a web form?

Hi,
I4m looking for a solution how to send a user defined parameter to a web form when I start the form from a html-page.
I think that it should work to add the parameter to the URL.
Example: I added myparam=myvalue at the end oft the URL
http://my.server.com:7777/f60cgi?form=myform.fmx&userid=scott/tiger@mydb&otherparams=useSDI=NO&lookAndFeel=generic&colorScheme=teal&myparam=myvalue
How can I fetch the parameter myparam in forms?

You have the user the otherParams parameter, which you can specify in the formsweb.cfg file, or override on the url. e.g. http://myhost/servlet/f690servlet?config=myApp&otherParams=myParam=myValue
In the Forms Builder, in the Navigator window, there is a node called Parameters. Create one in there, and then you can refer to it like a block variable. e.g. if :myparam = 'myvalue' then...
At runtime, Forms will match up any parameters on the command with parameters defined in your form, and populate them for you. You don't have to do anything.
Regards,
Robin Zimmermann
Forms Product Management

Send email to all users who have not submitted a form (SharePoint 13, SP Designer 13)

Hello all, I have been reading posts all day and have not come across the right solution. We have about 2,200 users in our site collection. I need to design a workflow that sends every one an email with a link to my blank form, then, once a week I
need the workflow to notify only those users who have not submitted the form. The part I am having trouble with is querying the users who have not submitted??? is there a way to use the form library data as a data connection and compare it to the data
in the UPS DB? that's really what I need to do, compare users who have submitted to all users.
Thanks for any help

I will suggest to create a timer job (which will run every week) and read library for all submitted form item's created by field and compare with data set which will come from UPS DB. Once these two set is ready,
use not in clause using LINQ to send email.
This is a draft outline solution which came to my mind. Hope, it will help.
please 'Propose as answer' if it help you, also vote this as helpful if you like this reply.

Key-nextrec not firing in forms 10g

I have a code in the above trigger, but it is not firing, I have it in the block property and no other place in the form
message('In key next rec----'); message(' ');
IF :SYSTEM.Last_Record = 'TRUE' Then
Null;
Else
next_record;
End If;

when-new-record-instance runs when you navigate to the next record.
Key-Nxtrec (Nxtrec is the correct spelling) only runs when you press the key assigned to call that trigger. In my environment, it is the Shift+ Down-Arrow key, but it could be just Down-Arrow -- it all depends on what key sequence is assigned to Forms Function Number 67 in your Forms Resource file, FMRWEB.res (or fmrusw.res).
So if the trigger runs when you press the correct keyboard key, and you issue the message but do not call the Next_Record; built-in, focus will not navigate to the next record in your running form.

Trigger not firing in linux OS

Hi All:
Initially i am developed a form using form builder and i deployed this form in Windows OS this is working fine when i am deploying this same form in Linux OS
that is not working even small trigger also not firing.so here we need to change any initial set up any help please.

We are developing and deploying our Forms application on Linux, have no problem with the triggers whatsoever - any specific reason why developing on windows when deploying from Linux? otherwise, you have to recompile every time you move the form to the Linux iAS box for deployment (as Tony mentioned).

Key-enter trigger not firing

hi friends,
i have a trigger on key enter, but it is not firing when i press the enter key,
why it is not working. i want the trigger to be fired only if the user press Enter key
thanks
Kris

Hi Kris,
I would suggest you try searching this forum for "KEY-ENTER". You shall be able to find out why it does not fire
regards,
teo

User defined table/object with system form

Hi,
I added an extra tab on the invoice form. But I want to save the info in another user defined object.
The new fields are coupled on the new added dbdatasrource. But it seems like the new added datasource is as much restricted than other dbdatasources on a system form (even if I have added them).
I see no way to let this thing work though the datasources or registered object (because a registered object is not accessible with the DI API)
Does anyone has a suggestion to program this?
greetz
Eddy

Hi Filipe,
I created a usertable of the document type and I created an UDO for it. And I added the fields on an extra tab on the invoice document. Therefore I have to add an extra dbdatasource to the invoice document and I binded the fields to the new added datasource.
When I started to work with the fields and the dbdatasource I noticed that I couldn't use functions like InsertRecord and setvalue, because it is restricted. And I didn't expect this because I added the datasource myself.
Greetz
Eddy

User defined properties not showing up in design center

Hello,
I did a search on User Defined Properties in this forum but couldn't find my answer.
We are using OWB 10gR2.
I already added a user defined property called UD_ALTERNATE_SCHEMA to the TABLE class definition.
I signed on as repository owner, I switched to single user mode, used OMBREDEFINE on class definition "TABLE", I commited my changes switched back to multi-user mode and signed off.
Here's the proof (it's in bold):
OMB+> OMBDESCRIBE CLASS_DEFINITION 'TABLE' GET PROPERTY_DEFINITIONS
BUFFER_POOL BUSINESS_NAME CACHE_MODE CONSTRAINTS DATA_SEGMENT_COMPRESSION DEPLOYABLE DESCRIPTION FREELISTGROUPS FREELISTS GENERATION_COMMENTS INDEXES INITIAL INITRANS LOGGING_MODE MAXEXTENTS MAXTRANS MINEXTENTS MONITORING_MODE NEXT OVERFLOW PARALLEL_ACCESS_MODE PARALLEL_DEGREE PARTITIONS PARTITION_TABLESPACE_LIST PCTFREE PCTINCREASE PCTUSED ROWDEPENDENCIES_MODE ROW_MOVEMENT SHADOW_TABLESPACE SHADOW_TABLE_NAME TABLESPACE UD_ALTERNATE_SCHEMA UOID
OMB+>
Here is how I defined this new property for the TABLE class.
OMB+> OMBDESCRIBE CLASS_DEFINITION 'TABLE' PROPERTY_DEFINITION 'UD_ALTERNATE_SCHEMA' GET PROPERTIES (TYPE,DEFAULT_VALUE)
STRING NO
My question is this.
Shouldn't this new property be available for edit when I right-click on a table object in the GUI interface and then choose "Properties" and then choose "User Defined" tab? Unfortunately it is not showing up on any of my tables in any of my projects.
Did I miss a step here? Or did I completely misundestand the concept of "User Defined Properties"?
Thanks

As so often happens, I found the answer almost immediately after posting this message.
In the user defined tab, I hadn't clicked/selected a table. Once I clicked on a table object, my brand new user defined property appeared.
Sorry to have waisted your time. I was really tired yesterday afternoon when trying all this.
Thanks

User-defined partners not coming in the extraction

Hi, the client where I'm working in has a user-defined partner in the Sales Documents, called Final User. This partner has the value ZA in the PARVW field in the VBPA table. We need to take the value of VBPA-KUNNR when its PARVW has value ZA, but we can't right now, because when the user modifies this field only (yes, only this field and nothing else) in VA02, it appears in the change log of the document, but it does not in the Delta Cockpit of the 2LIS_11_VAHDR.
I read notes 12682 and 520879 and I appended a field called PFINUSR to the MCPARTUSR calling the appending structure ZAMCPARTUS. I also added the following code to the RMCSUZ11 and RMCSUZ10 includes:
WHEN 'ZA'. MOVE UPE_VBPA-KUNNR TO UPE_PARTNER-PFINUSR.
I also modified the programs as described in the notes.
But when I go to LBWE and try to add the field to the extraction structure of 2LIS_11_VAHDR my field PFINUSR does not show in the right list. Am I missing something? Can anybody help me?
Edited by: Pedro Eguren on Aug 8, 2008 2:43 PM
The problem is that the notes are missing to lines. Two more tables need to be modified.
Edited by: Pedro Eguren on Dec 22, 2008 10:27 PM

Hi Raja,
Prior to trying Gordons option of unmarking and remarking them i would suggest you do a little more investigation as this can potentially change the field names in XL report and if you have any reports using them they may stop working (it can add a post fix of _1).
Firstly, what are the fields set as in the User Defined Fields window in XL reporter? Light Dimensions, Dimension Attribute or Measure? If its a Dimension Attribute for example on the Business Partner UDF, it will not be visible in the tab section but should be shown if you drag and drop the Business Partner dimension in the report, then right click and choose display more attributes (dimension attribute UDFs will be in this list). Light Dimensions and Measures should appear in the tabs.
If they are set as a light dimension or measure and are not in the tab section, has this only just started happening or have they never been visible? If its just started happening, having you recently upgraded to a new patch? If so, in future you need to run a script on the Company and Common database prior to the patch upgrade. If you did not run these scripts you will need to do Gordons solution but as I say, if any reports have UDFs in these may not work after and you will have to manually edit them.
Regards,
Adrian

JPub Error User-defined type not found

I just have found about Jpub could help me with my problem, so i try it, but when i try to publish a package it gives me this error:
J2T-118, ERROR: User-defined type "ADMCAD.PKG_CONSULTA_BR_NOME.TAB_ELEITOR" was
not found in the database
This is the package:
create or replace package admcad.pkg_consulta_br_nome as
VT_NUM_INSCRICAO VARCHAR2(12);
VT_COD_SIT_ELEITOR NUMBER(2);
VT_NOM_ELEITOR VARCHAR2(70);
VT_DAT_NASC NUMBER(8);
VT_NUM_ZONA NUMBER(4);
VT_SGL_UF VARCHAR2(2);
-- tipo que sera retornado
TYPE REC_TAB_ELEITOR IS RECORD (
          NUM_INSCRICAO VT_NUM_INSCRICAO%TYPE,
          NOM_ELEITOR     VT_NOM_ELEITOR%TYPE,
          NOM_PAI     VT_NOM_ELEITOR%TYPE,
          NOM_MAE     VT_NOM_ELEITOR%TYPE,
          DAT_NASC     VT_DAT_NASC%TYPE,
          DAT_DOMIC_MUNIC     DATE,
          COD_SIT_ELEITOR     VT_COD_SIT_ELEITOR%TYPE,
          SGL_UF     VT_SGL_UF%TYPE,
          NUM_ZONA     VT_NUM_ZONA%TYPE);
TYPE tab_eleitor IS TABLE OF REC_TAB_ELEITOR INDEX BY BINARY_INTEGER;
TYPE cursor_consulta IS REF CURSOR;
SUBTYPE T_NUM_INSCRICAO is VT_NUM_INSCRICAO%TYPE;
SUBTYPE T_COD_SIT_ELEITOR is VT_COD_SIT_ELEITOR%TYPE;
SUBTYPE T_NOM_ELEITOR is VT_NOM_ELEITOR%TYPE;
SUBTYPE T_NOM_PAI is VT_NOM_ELEITOR%TYPE;
SUBTYPE T_NOM_MAE is VT_NOM_ELEITOR%TYPE;
SUBTYPE T_DAT_DOMIC_MUNIC is date;
SUBTYPE T_DAT_NASC is VT_DAT_NASC%TYPE;
SUBTYPE T_SGL_UF is VT_SGL_UF%TYPE;
SUBTYPE T_NUM_ZONA is VT_NUM_ZONA%TYPE;
TYPE rec_consulta IS RECORD (
num_inscricao T_NUM_INSCRICAO,
cod_sit_eleitor T_COD_SIT_ELEITOR,
nom_eleitor T_NOM_ELEITOR,
nom_pai T_NOM_PAI,
nom_mae T_NOM_MAE,
dat_domic_munic T_DAT_DOMIC_MUNIC,
dat_nasc T_DAT_NASC,
sgl_uf          T_SGL_UF,
num_zona          T_NUM_ZONA);
procedure prc_consulta (     d01_cod_fon_nome in varchar2,
          d01_cod_fon_mae in varchar2,
          d01_dat_nasc in number,
               d01_qtd_regs out number,
          vtab_eleitor in out tab_eleitor);
end pkg_consulta_br_nome;
This is the command line:
jpub -user=XXX/XXX@there -sql=admcad.pkg_consulta_br_nome
Am I wrong, or jpub was suppose to publish any type in the signature?
Please help.
Rafael Dittberner

Rafael,
I suggest you try asking in the Toplink discussion forum. You can find a link to it from this Web page:
http://www.oracle.com/technology/products/ias/toplink/index.html
Good Luck,
Avi.

SPECIAL1 user defined Trigger not firing in Forms

Similar Messages

Maybe you are looking for