Specific header on a infotype

Hi
My company wants a specific header on a infotype.
May i know how to do it.
Seema.

Hi,
You need to go to PM->PA-> Customiziing Procedure -> Change Screen header.
You can maintain max of 3 lines and 83 columns.
Good luck
Om

Similar Messages

How to asssign output value in the CSV file for the specific header

Hi,
I am using OpenScript 9.10. The problem I am facing is that, to Write the Output value captured from the application, When i am trying to use the methods "Appen String to File" i am unable to write / assign the out put value below the specific header. Can any one please look into this and post the methods related to Write the output vaues in to the CSV files under specific headers.
Thanks in Advance.
Thanks.,
Siva

Hi Alex,
Thanks for your reply.I need to write the output value under specified parameter name.
for example after creating the sales order,the order number have to write in the CSV file under
OrderNumber column.I tried with appendStringtofille() method,by using this able to write the value under
first column.But i need to write output value under specified columnname(means Header name in the cSV
file).can u please give a reply for the above problem.
Note: In that Csv file i am taking the input vales and also need to write the output values under
specified column(header)
Thanks,
Siva Thota.

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I have written a binary file with a specific header format in LABVIEW 8.6 and tried to Read the same Data File, Using LABVIEW 7.1.Here i Found some difficulty.Is there any way to Read the Data File(of LABVIEW 8.6), Using LABVIEW 7.1?

I can think of two possible stumbling blocks:
What are your 8.6 options for "byte order" and "prepend array or string size"?
Overall, many file IO functions have changed with LabVIEW 8.0, so there might not be an exact 1:1 code conversion. You might need to make some modifications. For example, in 7.1, you should use "write file", the "binary file VIs" are special purpose (I16 or SGL). What is your data type?
LabVIEW Champion . Do more with less code and in less time .

P0000-STAT1 (Customer Specific Status) field on Infotype 0000

Hi All,
I have a requirement on Customer specific status field on infotype 0000, Where I should be able to maintain that field through PA40.
As this field is standardly delivered as output field only through SAP I am unable to force that field as input field in module pool.
did any one used this field before as input field in IT0000? I couldn't find OSS note on this issue.
Please let me know if any one has solution on this.
Thanks,
Sang

Hello sangarshitha
try using field symbol ,
asssign field symbol to p0000-stat1
like
field-sybmbols : <fs> type p0000-stat1.
ASSIGN ('(MP000000)PSPAR-STAT1') TO <fs>. "check table pspar in debug wether field stat1 is there else go for P0000-stat1
<fs> = "assign what you want to here.
write this in PBO of User Exit/Badi for IT-0000
reward points if helpful

Specific Business Object for Infotype 2012 Time Transfer Specifications

Anyone know if there is a specific business object for infotype 2012 - Time Transfer Specifications? or should we use the standard EMPLOYEESU Employee information according to infotype and subtype or create our own zclass, any experience/help is much appreciated.
BR Sonny

Hi
Thanks for the interest.
The business requirement is to transfer some remaining Vacation Quotas to the next Vacation year in Denmark. We have build a application for the employee where they choose to move the remaining holiday to the next year. The remaining absence quotas are converted to infotype 2012 records with Locked indicator set. Now we want to catch this records and send a Decision Task to the Manager for Approval, once approved the Locked indicator should be removed.
Sonny

Reg: Display Specification: Header.. TCode: CG02

Hello Guys,
Is there any FM to fetch the "Display Specification: Header" data for any particular material or against the Real substance number.
If you go to transaction CG02 and - for my case i have Real substance number - i put the Real substance number and then put the material number.
In below Property tree you can choose any standard property for that material and double click on it you get Value Assignments if is there any Standard FM then i can fetch the data.
Thanks in Advance..
Sayak

Dear All,
We have created Custom Condition Type and have made the following settings in Tcode M/06 as:
Cond. class: A
Calcul. type: A
Manual Entries: C
Header condition: checked
Delete: checked
Amount/percent: checked
delete from DB: Do not delete (set the deletion flag only)
scale basis: C
In the above configurations, there is no Pricing Procedure maintained for the above condition type. But still i am not able to edit Condition Amount at PO Header level.
Kindly help me and let me know whether i need to do anything, which i missed out.
Regards,
Ramesh Manoharan

How to assign a costcenter for specific wage type comparing infotype.

Hi experts,
In PA30 im entering the Personel Number, Infotype ,Wage type and pressing create.
In that im giving the Date and Amount then i save it.
What i need is i need to change the cost center(kostl) according to the specific wage type and infotype.
that is i give inotype as 14 and wage type as 2003. for this im assigning the cost centre as 'XXXX'.
Im doing this manually, thru Edit - > Maintain Cost Assignment.
But my client needs to do the cost assignment automatically comparing with infotype and wage type.
Can anyone suggest me to do this.
Regards,
Vijay.R

Hi vijayanrs
As above pointed
Go to infotype 15 in creation mode (Enter the values)
On the Top near the overview button there is another button Maintain Cost Assignment (Control +F2)
Select the cost center for which this wagetype needs to go.
Thanks
RAjdeep

SOAP adapter and BizTalk specific header entries

We are trying to implement a B2B scenario using XI 2.0 and the SOAP adapter (J2SE). The customer is using BizTalk. My question is if it is it possible in the SOAP adapter to include BizTalk-specific

Hi Stefan,
I have a scenario in which I want to call an External WebService from SAP XI 3,sp10. An SAP RFC Is the SENDER.
After doing the config I see 2 failed messages in MONI everytime. I do not see the soap header in the message. The error is -->failed to reach the end point.
I want to see if I am passing the Header correctly.A
Also most important I need to have a Authentication tag in my header tag which seems to be specific to 3rd party system hosting the webservice.
I want my SOAP Header to have :
          <s:AuthenticationInfo>
                <s:userName>webuser</s:userName>
                <s:password>XXXXX</s:password>
           </s:AuthenticationInfo>
When using the SOAP Receiver channel I expect XI to put this but does not look like its doing the job. Anyways the s: tags above are custom tags with custom namespace. How do I add in the SOAP Header ?
Thanks
Ashish

Header of custom infotype

Hi,
I have created a custom PA infotype and my requirement is that I do not want the standard SAP header and want to display my own header fields.
Is it possible to delete the SAP header? will that cause any problem?
Thanks,
Harini

Needs a configuration in SPRO. Got the solution

I need to call specific header,line and footer based on condition

Hi All,
i am working on PO report and it has 3 PO_types. In my rtf i created 3 Header,3 Lines, 3 detials. And at a time only one Header, One line and one detail should call based on PO_TYPE.
Can any body guide me, to achieve this. Or is there any other way for it?
Thanks in advance !
Regards,
Ad

Maybe you can try the <?start:body?> and <?end body?>

How to add specific header and footer to flat file using SSIS 2008

The SSIS package need to create file with headers, totals and adds a status to position one of the records.
Header: "$$ADD ID=ENTK0557 BID='IA   HBZAC14HBZACHRYCORP' PASSWORD='CUSTOMER        ' %AU HBZAC14" is added.
$$ADD = Static
ID=ENTK0557 = Static
BID='IA   HBZAC14HBZACHRYCORP' = "HBZAC14" is the company, "HBZACHRYCORP" is company name
PASSWORD='CUSTOMER        ' = static
HBZAC14 = company
Control Totals:
T010533343 000050 0002659604 000000 0000000000
T = Totals
010533343 = Account Number
000050 = Total records
0002659604 = Total checks
000000 = TBD
0000000000 = TBD
Data for the file
DECLARE
@T AS
TABLE
[BR-ISSUE-VOID-IND] [char]
(1)
NULL,
[BR-ACCT-NBR] [varchar]
(9)
NULL,
[FILLER1] [char]
(1)
NULL,
[BR-SERIAL-NBR] [varchar]
(8000)
NULL,
[BR-CHECK-AMT] [varchar]
(8000)
NULL,
[BR-CK-ISSUE-DATE] [varchar]
(6)
NULL
INSERT
INTO @T
[BR-ISSUE-VOID-IND]
[BR-ACCT-NBR]
[FILLER1]
[BR-SERIAL-NBR]
[BR-CHECK-AMT]
[BR-CK-ISSUE-DATE]
SELECT
'C'
,NULL,' ',30090072,2114.39,100502
UNION
ALL
SELECT
'C'
,NULL,' ',30090190,430.58,100502
UNION
ALL
SELECT
'C'
,NULL,' ',30092371,589.93,100502
UNION
ALL
SELECT
'C'
,NULL,' ',30092550,1198.6,100502
SELECT
FROM @T
File SnapShot.

Using SSIS its difficult unless you use a script task after the data flow to add the header footer bits.
A much better option in this case would be bcp as you can generate query with values in the order you want and bcp it out
http://msdn.microsoft.com/en-us/library/ms162802.aspx
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Status Sync between Specification Header Status (PLM) and Decision Point Status (PPM)

This is what I'd like to achieve. Thanks in advance.
Status of Decision Point in PPM of the Portfolio Item updated to “QA Clear” when the Product Specification is “Retail-Ready."

Hi Shi,
Can you please elaborate the issue with some more details.
Regards,
Nishit Jani

Filtering all messages with specific header

hi!
we have an external appliance antispamm system, it adds a header similar to this one:
X-TM-AS-Result: Yes-28.065600-6-31
and i want to move all these messages to a user folder called spam.
i can't find any proper example regarding this case.
any hints?
regards

that's what i was trying.
in Sun Java System Messaging Server 6 2005Q4 Administration Guide (http://docs.sun.com/app/docs/doc/819-2650/6n4u4dtsk?a=view) i can read:
Store the filter in the following file:
../imta/config/imta.filterbut i dont have that folder. my option.dat, imta.cnf and msg.conf are in
/var/opt/SUNWmsgsr/config
so i supose this is the correct path.
must i create imta.filter in here?
regards

Infotype Header

Hi,
I have created a custom PA infotype and as per the requirement the database table for this infotype would have dates defaulted to 01.01.1800 and 31.12.9999 since the actual data would be stored in OM tables.
Now, the infotype header is retrieving data as of the BEGDA and hence in the header of the infotype the latest values are not getting displayed. I want the header to display the values valid as of system date.
Please let me know where to configure that.
Thanks,
Harini

Got the solution.

Create a Link for HCM Header Infotype

Dear.
How can add a link(URL) in the header for an Infotype?
I found this document of Marcio Leoni.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/806cda54-610c-2b10-3089-85f254e318de?quicklink=index&overridelayout=true
Is posible do this?
Regards

Hi,
I don't think it is possible.
Infotype header data is a restricted are and DAT (field contents ) has a maximum of 41 characters for Infotype 0105.
However, for URL or e-mail address you need at least 241 characters which is not possible to have in header.
Although I don't believe so, if I come across a solution in this regard, I'll let you know.
Regards,
Dilek

Specific header on a infotype

Similar Messages

Maybe you are looking for