Header of custom infotype

Hi,
I have created a custom PA infotype and my requirement is that I do not want the standard SAP header and want to display my own header fields.
Is it possible to delete the SAP header? will that cause any problem?
Thanks,
Harini

Needs a configuration in SPRO. Got the solution

Similar Messages

  • Adding field from Custom Infotype in Screen Header-PA30

    Hi all,
    Can we add the fields from custom infotype to the screen header in PA30? When I tried through Change Screen Modifications, I could not see the custom infotype in the Infotype column, so I could not select the required field.
    Please guide.
    Thanks in advance.

    Hi,
    When you take a drop down from the infotype column, you will see a window with infotypes. By default, it is restricted to 500 entries. To change that, click on the narrow bar under u201Crestrictionsu201D (has a downward arrow) and change the maximum number of hits to 999. You will then get all the infotypes including the custom ones.
    Hope this helps.
    Donnie

  • About to use HR_INFOTYPE_OPERATION to create customer infotype issue:

    hi
    i want to create infotype use function(HR_INFOTYPE_OPERATION).
    this infotype is customer infotype.
    the first scenario is:
      i'm be sure no data about one employee in this infotype(9004).
      to call with data upload function and put data into internal table IT_PA9004.
      and the table data as follow:
    one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
              it_pa9004-zzvalue = 50 (customer field).
    two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
              it_pa9004-zzvalue = 60 (customer field).
    three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
              it_pa9004-zzvalue = 70 (customer field).
    four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
              it_pa9004-zzvalue = 80 (customer field).
    i run the programme and get information is:
    11022887 insert ok.
    11022887 insert ok.
    11022887 insert ok.
    11022887 insert ok.
    but i use the transation PA30 to view all data:
    in database just exist one row:
    four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
              it_pa9004-zzvalue = 80 (customer field).
    the second scenario is:
    in database the infotype have exist one row:
               pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
               pa9004-begda = '20080318' , pa9004-endda = '20080318'
               pa9004-zzvalue = X (customer field).
    and i create another row:
    line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
              it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
              it_pa9004-zzvalue = 80 (customer field)
    i run the programme and get information is:
    11022887 insert ok.
    the three scenario is:
        set  HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
        in any scenario will get error :not exist subtype .
    what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
       create other infotype of SAP owner.
       and will create successfully.
    so i thank it may be config Constraints about customer infotype.
    is time Constraints effect?
    so i want to how to check it?
    and if i want to create one infotype for customer using PM01 what some thing
    must be taken into account.
    think you advance.
    partial source code as follow:
    FORM ACTION_INSERT .
      DATA: P_FLAG TYPE C.
      DATA: WA_LOG LIKE LINE OF DATA_LOG.
      DATA: PP_ACTION TYPE PSPAR-ACTIO.
      LOOP AT IT_PA9004.
        CLEAR P_FLAG.
        CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
        PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
        PP_ACTION = IT_PA9004-ACTION.
        PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
        IF P_FLAG IS INITIAL.
          if test_run = space.
            COMMIT WORK.
          else.
            ROLLBACK WORK.
          endif.
          write:/ it_pa9004-pernr,'insert ok'.
        ELSE.
          ROLLBACK WORK.
          write:/ it_pa9004-pernr,'error'.
        ENDIF.
        PERFORM unlock_employee USING IT_PA9004-pernr .
      ENDLOOP.
    ENDFORM.                    " ACTION_INSERT
    FORM LOCK_EMPLOYEE  USING    P_PERNR
                        CHANGING PP_FLAG.
      CHECK PP_FLAG IS INITIAL.
      CLEAR P_RETURN.
      CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
        EXPORTING
          number = P_PERNR
        IMPORTING
          return = P_RETURN
        EXCEPTIONS
          OTHERS = 01.
      CALL FUNCTION 'HR_INITIALIZE_BUFFER'
        EXPORTING
          pernr = P_PERNR.
      IF P_RETURN IS NOT INITIAL.
        PP_FLAG = '1'.
      ENDIF.
    ENDFORM.                    " LOCK_EMPLOYEE
    FORM HR_INFOTYPE_OPERATION  USING    P_PA9004 LIKE IT_PA9004
                                         P_ACTION type PSPAR-ACTIO
                                CHANGING PP_FLAG.
      CHECK PP_FLAG  IS INITIAL.
      DATA: bapipakey type bapipakey,
            P_SUBTY TYPE P9004-SUBTY,
            PP_9004 TYPE TABLE OF  P9004 WITH HEADER LINE.
      CLEAR P_RETURN.
      REFRESH PP_9004.
      MOVE-CORRESPONDING P_PA9004 TO PP_9004.
      IF P_ACTION = 'INS'.
        PP_9004-AEDTM = SY-DATUM.
        PP_9004-UNAME = SY-UNAME.
      ENDIF.
      IF P_ACTION = 'MOD'.
        PP_9004-AEDTM = SY-DATUM.
        PP_9004-UNAME = SY-UNAME.
      ENDIF.
      APPEND PP_9004.
      P_SUBTY = P_LGART.
      CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          infty         = '9004'
         subtype       = 'FQ03'
          subtype       = P_SUBTY
          number        = PP_9004-pernr
          validityend   = PP_9004-ENDDA
          validitybegin = PP_9004-begda
         RECORDNUMBER  = pp_9004-seqnr
          record        = PP_9004
           operation     = 'INS'
         operation     = P_ACTION
          nocommit      = 'X'
        IMPORTING
          return        = P_RETURN
          key           = bapipakey
        EXCEPTIONS
          OTHERS        = 0.
      IF P_RETURN IS NOT INITIAL.
        PP_FLAG = '9'.
      ENDIF.
    ENDFORM.                    " HR_INFOTYPE_OPERATION
    FORM UNLOCK_EMPLOYEE  USING    P_PERNR.
      CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
        EXPORTING
          number = p_pernr
        IMPORTING
          return = P_RETURN
        EXCEPTIONS
          OTHERS = 01.
    ENDFORM.                    " UNLOCK_EMPLOYEE

    hi
    i want to create infotype use function(HR_INFOTYPE_OPERATION).
    this infotype is customer infotype.
    the first scenario is:
      i'm be sure no data about one employee in this infotype(9004).
      to call with data upload function and put data into internal table IT_PA9004.
      and the table data as follow:
    one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
              it_pa9004-zzvalue = 50 (customer field).
    two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
              it_pa9004-zzvalue = 60 (customer field).
    three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
              it_pa9004-zzvalue = 70 (customer field).
    four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
              it_pa9004-zzvalue = 80 (customer field).
    i run the programme and get information is:
    11022887 insert ok.
    11022887 insert ok.
    11022887 insert ok.
    11022887 insert ok.
    but i use the transation PA30 to view all data:
    in database just exist one row:
    four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
              it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
              it_pa9004-zzvalue = 80 (customer field).
    the second scenario is:
    in database the infotype have exist one row:
               pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
               pa9004-begda = '20080318' , pa9004-endda = '20080318'
               pa9004-zzvalue = X (customer field).
    and i create another row:
    line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
              it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
              it_pa9004-zzvalue = 80 (customer field)
    i run the programme and get information is:
    11022887 insert ok.
    but in database just exist the first data
               pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
               pa9004-begda = '20080318' , pa9004-endda = '20080318'
               pa9004-zzvalue = X (customer field).
    the three scenario is:
        set  HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
        in any scenario will get error :not exist subtype .
    what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
       create other infotype of SAP owner.
       and will create successfully.
    so i thank it may be config Constraints about customer infotype.
    is time Constraints effect?
    so i want to how to check it?
    and if i want to create one infotype for customer using PM01 what some thing
    must be taken into account.
    think you advance.
    partial source code as follow:
    FORM ACTION_INSERT .
      DATA: P_FLAG TYPE C.
      DATA: WA_LOG LIKE LINE OF DATA_LOG.
      DATA: PP_ACTION TYPE PSPAR-ACTIO.
      LOOP AT IT_PA9004.
        CLEAR P_FLAG.
        CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
        PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
        PP_ACTION = IT_PA9004-ACTION.
        PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
        IF P_FLAG IS INITIAL.
          if test_run = space.
            COMMIT WORK.
          else.
            ROLLBACK WORK.
          endif.
          write:/ it_pa9004-pernr,'insert ok'.
        ELSE.
          ROLLBACK WORK.
          write:/ it_pa9004-pernr,'error'.
        ENDIF.
        PERFORM unlock_employee USING IT_PA9004-pernr .
      ENDLOOP.
    ENDFORM.                    " ACTION_INSERT
    FORM LOCK_EMPLOYEE  USING    P_PERNR
                        CHANGING PP_FLAG.
      CHECK PP_FLAG IS INITIAL.
      CLEAR P_RETURN.
      CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
        EXPORTING
          number = P_PERNR
        IMPORTING
          return = P_RETURN
        EXCEPTIONS
          OTHERS = 01.
      CALL FUNCTION 'HR_INITIALIZE_BUFFER'
        EXPORTING
          pernr = P_PERNR.
      IF P_RETURN IS NOT INITIAL.
        PP_FLAG = '1'.
      ENDIF.
    ENDFORM.                    " LOCK_EMPLOYEE
    FORM HR_INFOTYPE_OPERATION  USING    P_PA9004 LIKE IT_PA9004
                                         P_ACTION type PSPAR-ACTIO
                                CHANGING PP_FLAG.
      CHECK PP_FLAG  IS INITIAL.
      DATA: bapipakey type bapipakey,
            P_SUBTY TYPE P9004-SUBTY,
            PP_9004 TYPE TABLE OF  P9004 WITH HEADER LINE.
      CLEAR P_RETURN.
      REFRESH PP_9004.
      MOVE-CORRESPONDING P_PA9004 TO PP_9004.
      IF P_ACTION = 'INS'.
        PP_9004-AEDTM = SY-DATUM.
        PP_9004-UNAME = SY-UNAME.
      ENDIF.
      IF P_ACTION = 'MOD'.
        PP_9004-AEDTM = SY-DATUM.
        PP_9004-UNAME = SY-UNAME.
      ENDIF.
      APPEND PP_9004.
      P_SUBTY = P_LGART.
      CALL FUNCTION 'HR_INFOTYPE_OPERATION'
        EXPORTING
          infty         = '9004'
         subtype       = 'FQ03'
          subtype       = P_SUBTY
          number        = PP_9004-pernr
          validityend   = PP_9004-ENDDA
          validitybegin = PP_9004-begda
         RECORDNUMBER  = pp_9004-seqnr
          record        = PP_9004
           operation     = 'INS'
         operation     = P_ACTION
          nocommit      = 'X'
        IMPORTING
          return        = P_RETURN
          key           = bapipakey
        EXCEPTIONS
          OTHERS        = 0.
      IF P_RETURN IS NOT INITIAL.
        PP_FLAG = '9'.
      ENDIF.
    ENDFORM.                    " HR_INFOTYPE_OPERATION
    FORM UNLOCK_EMPLOYEE  USING    P_PERNR.
      CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
        EXPORTING
          number = p_pernr
        IMPORTING
          return = P_RETURN
        EXCEPTIONS
          OTHERS = 01.
    ENDFORM.                    " UNLOCK_EMPLOYEE

  • IDOC :: how to send data from Custom Infotype in SAP HR to third party

    Hi,
    I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
    Please help me in doing it.
    I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
                                                                                    ZTALENT                        Talent Management                                                                               
    5  E1PLOGI                        Header for an HR Object (Master Data or Organizational Data)                                                                               
    5  E1PITYP                        HR: Transported Infotypes and Subtypes for an Object                                                                               
    ZPUSER                         User base Data File                                          
                    ZPERSON                        Personal Information File Segment                            
                    ZPOST                          Position File                                                
                    ZOPE                           Overall Performance                                          
                    ZPWORK                         Outside Work Experience                                      
                    ZPEDUC                         Education Details of Employee                                
                    E1P0000                        HR: HR Master Record Infotype 0000 (Actions)                 
                    E1P0001                        HR: HR Master Record Infotype 0001 (Org. Assignment)         
                    E1P0002                        HR: HR Master Record Infotype 0002 (Personal Data)           
                    E1P0016                        HR Master Record: Infotype 0016 (Contract Elements)          
                    E1P0022                        HR Master Record: Infotype 0022 (Education)                  
                    E1P0023                        HR Master Record: Infotype 0023 (Other/Previous Employers)   
                    E1P0041                        HR Master Record: Infotype 0041 (Date Specifications)        
                    E1P0105                        HR: HR Master Record Infotype 0105 (Communications)       
                   ZE1P9020
                    ZPLANG                         Language Details                                             
                    ZACTION                        Actions Changes            
    Regards,
    Krishna

    Hello Shankar,
             Technically TEMSE files are read by calling the following 3 function modules in sequence,
                  1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
                  2) RSTS_READ : read the object
                  3) RSTS_CLOSE: close the object
    Regards,
    Rajesh

  • Custom infotype - field length issue

    Hi experts,
    We have a requirement of keeping so much free text fields in the custom infotype. However, the system doesnu2019t allow having these many fields in the PS structure. We got the information from the error description as- The maximum length of PS structures for infotypes is 1000; this is the length of the general infotype header in bytes. Could you please suggest some way to solve this issue?
    Thanks,
    Rahul

    Give a field and try to enter some decription for large text in  that field .
    Create a table for that field and give F4 for that .
    Maintain the text in SO10 and call that text using read_text fn module .
    Try this way

  • Regarding custom infotype

    i have created a custom infotype.when i click the maintain overview button for that infotype,iam getting the maintain overview screen.but the problem is that some invalid names are coming as the field names.how to change the field names or header of the values in the maintain overview screen.please give me a solution.
    thanks.

    Hi Vadivel
    Custom infotypes have maintenace screens with the name "<b>MPXXXX00</b>". 'XXXX' is the infotype number. The overview screen is the number '<b>3000</b>' included in program "MPXXXX00". You can modify this screen as you want. However, it may be still in context of repair.
    Kind Regards
    *--Serdar
    [email protected]

  • Updating a customer infotype detail table (in PIQSTM) from an interface

    We have a customer infotype that has a header table (HRP....) and a detail table (HRT.....) and we have this attached to transaction PIQSTM. This works fine. However, we now have a requirement to update the infotype via an interface and we have hit a problem using the standard function modules. We have tried, for example, using FM 'HRIQ_PNNNN_MAINTAIN' but have found that whilst it updates the header ok, if any detail record exists it is always overwritten. We need to keep the existing detail records attached to the same header.
    I've debugged the way our tables are updated when saved in PIQSTM and can see that there is a lot going on with buffers. It seems that buffers are updated and then FM 'RH_BASE_UPDATE_DB_DIALOG' is called, ultimately resulting in an insert to our detail infotype table. In our interface program, obviously I would prefer not to update the table directly. I guess BDC is always an option but again, I'd prefer not to use it if possible.
    Has anyone out there done this and can offer me any advice ?
    thanks,
    Malcolm.

    Malcom,
       Try to feed old HRT record and New records(from interface) to Insert/update info-type function module.
    Thanks,
    Prabhat Singh

  • Error while creating a query for my custom infotype

    Hi,
    I have created a custom infotype with fields currency amount and currency field .
    While I am creating a query for it its giving an error
    Message no. AQ_AD_HOC221 Error when generating the report(see long text )
    I tried to execute the standard program RPUMS40CCI but still I am facing same error .
    I have also maintained table T777i for my infotype but still problem exists.
    Please help.
    P

    Hi
    Check in PM01

  • Error while editing an automaticlly populated record of  a custom infotype

    hi,
    a query in HR ABAP.
    i have created a custom Infotype to store the CTC details of an employee. this custom IT needs to get the records auto populated, when they are created in Infotype 0008.
    i have used the exit. EXIT_SAPFP50M_002  inside which  an include program is written  :ZXPADU02
    using this, the records made to get create automatically in the custom IT.
    but when we try to modify or delete those records thru the tcode PA30,
    it does not allow to do so and throws a standard error message. as  below.
    Specified subtype is invalid
    Message no. PG088
    please help me out to fix this issue.

    the exact point of the std error is,
    i do the folowing steps.
    1)_ for auto creating a record in custom IT Pa**** , i goto transaction, PA30, create record in IT 0008 with a basic Pay., click on save.
    on saving , the EXIT_SAPFP50M_002 is called where i ve written a Z inlcude Program, which inserts the record in custom IT PA****.  this is successful.
    2) when i try to change or delete the same record which i ve created as above, through the Tcode PA30 for custom IT, PA
    ****, i get the error.
    hope the problem is clearly mentioned

  • How to create the custom infotypes in Campus Management

    Hi,
    Please help me how to create the custom infotypes in campus management.
    Thanks,
    Lakshmi.

    Hi,
    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Cheers,
    vasavi.
    kindly reward if helpful.

  • Custom Infotype - Using Table control in the screen.  IN OM

    Hi,
    I am having a requriement where in I need to create a custom infotype using table control in the screen. I have to create this in OM and I am using PPCI transaction to create the info type. I am able to create the infotype with fields but not table control. Please let me know if any one of you came across and help me with the process I need to follow.
    Thanks in advance.
    Venkat.

    Hello,
    After you create the info type throug PPCi, you can directly go to the Sceen module program created automatically while creating Info type and edit the screen.
    activate it after your changes.
    Regards,
    Srujan.

  • Data not storing in Custom infotype build with tab strips

    Hi All,
    I have created one custom infotype 9030,
    With screen 2000.
    which is having tab strips, I have build the screens refering to p9030-zztest its not storing in database.
    where I am doing wrong...please let me know what should be done in this case.
    Regards
    Satish.v

    Hi,
    Checkout the below link :
    <link to blacklisted site removed by moderator>
    Shailaja Ainala.
    Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • Hiding table fields in custom infotype

    HI guyz,
    i have created a custom infotype which has 2 subtypes . certain fields should not be displayed when we select the subtypes. i have used the code below. the screen contains a table.
    MODULE hide_FIELDS OUTPUT.
    IF p9555-subty = '1'.
    LOOP AT SCREEN.
    IF screen-group2 = 'ABC'.
    screen-active = 0.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ENDIF.
    IF p9555-subty = '2'.
    LOOP AT SCREEN.
    IF screen-group2 = 'XYZ'.
    screen-active = 0.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ENDIF.
    ENDMODULE. " hide_FIELDS OUTPUT
    the fields which are not in the table are not getting displayed as required but the fields in the table still appear on the screen(they are grayed out). i do not want them to appear on the screen. can anyone help me with this. Thanks in advance.

    Hi Madhu Reddy , instead of using screen-invisible = '1' , u can try this .
    MODULE sereen_modify OUTPUT.
    DATA:  COL TYPE CXTAB_COLUMN.
    LOOP AT TC-COLS into COL.      " TC is ur Table Control
      IF col-screen-group1 EQ '007'.     " Modification group1 is say 007.Also u can add other              checks like pnnnn-subty = 1 here .
       col-invisible = '1'.
       col-screen-output = '0'.
       modify TC-COLS from COL index COL-INDEX.
         ENDIF.
    ENDLOOP.
    ENDMODULE.                           " Call this module in ur Flow Loic PBO.
    *Reward Points If Helpful

  • Need to create maintenance view for a custom infotype

    A custom infotype 90XX is created. The data cannot be modified or created through PA30 in this infotype. Through PA 40 actions only we can create/change the record/data. We have created some 1000 records in it. Now can we create a maintenance view for the infotype so that we can create, delete or change the data in the infotype as and when we want.

    Hi,
    pls chk dat u have maintained the 'Infotype Charecteristics' and 'Technical Attributes' correctly.
    thanks,
    teja.

Maybe you are looking for