Specific Start/End Times for Playlist Music?

I'm someone that dabbles in music production and i like to work with samples. I know that in iTunes you can set the Start Times and End Times of songs so that you may skip a rediculously long intro or just euthanize a song whose ending drags on for minutes at a time. (I'm looking at you, The Mars Volta.)
Anyway, when it comes to producing samples, sometimes when i listen to music i'll hear this one five-second piece that would make a great loop, and i write down the song name and the exact location of that interval. In iTunes, I attempted to create a "Samples" playlist with these songs in it, along with their Stop/Start Times sliced down exactly to that one sample. it's a great way to keep a log of what i plan to use in the future and keep good song ideas. Unfortunately, the Start/Stop Times set in iTunes are global, and affect the song no matter what Playlist is it on. Is this avoidable, or am i stuck? (Apple, please add this in your next iTunes release)
-Dave

Dave,
You're stuck.
Unless you want to duplicate the song and then make your adjustments.
If it were me, I'd put the track I'm interested into GarageBand and cutting it down to just the bit I want and the send that version back to iTunes.
Matt

Similar Messages

Start and end time for a mapping in process flow

We are executing 6 mappings in a process flow. 4 out of 6 run in parallel . The log file created in a control center denotes start and end time for a process flow. But Is there any way to find out how long those individual mappings took ? Is start/end time logged on a mapping level somewhere ?
Thanks

As well as the repository browser you can use the SQL Developer reports on the utility exchange which are based on the public views.
http://www.oracle.com/technology/products/warehouse/htdocs/Experts/owb_sqldeveloper.zip
You can dig in and see how these are read from the SQL views.
Cheers
David

Get Start and End times for each step in a job

Can someone tell me how to get the start and end times for each step in a background job? Table TBTCP only stores the time that the step was saved in a background job. Table TBTCO stores the times for the entire job and not each individual step.
Thanks.
Ryan

Hi,
Please check this tables and FM perhaps they may help
TBTCJSTEP - Background Job Step Overview
TBTCR - Batch scheduler execution time
TBTCS - Background Processing: Time Schedule Table
GET_JOB_RUNTIME_INFO
Regards,
Ferry Lianto

Separate Start/Stop times for a single song file

I am trying to create some playlists for different moods e.g. calm, happy, upbeat etc.
Now, my problem is this. I have some songs that have more than one mood within them, and I would like to set different start/stop times for the one song file.
I would like to be able to set different start/stop times in each playlist and not affect the start/stop times for the file in the music library.
Thanks in advance to anyone who can help!

The only way to do this is to make a duplicate copy of the song for your playlist and adjust the times for the duplicate.

Can't view time or change start/end time of clip

Using imovie '09 and have several events that I imported from .mov files. imovie displays the total length of the clip but when I run the cursor over the clip in the browser the little timer window that pops up says "Created:" followed by the date/time that it was originally imported from a camera into .mov format. Every other file that I've imported directly into imovie from a camera gives me the running time of the clip as I run the cursor through the clip. I've tried to adjust the clip's date/time but it won't let me create a start/end time - regardless of what date/time I put in it assigns the same date/time to the start and end of the entire clip and doesn't show any running time so I can't mark/note specific times in the clip that I want to later select. Not sure why this is happening with these specific clips that were imported from existing .mov files - possibly because these clips were originally imported onto a pc and converted into .mov files, then imported into imovie after that? I still have the original tapes so I could import to imovie from scratch but would prefer not have to to do that as this makes up 20 hours of vid. Any solutions?

You might get a better response to your question over in the iLife > iMovie community. This forum is iMovie for iOS so most visitors here are working on a different platform, and while some may know about both products, many won't, me included.
tt2

Contract Value Calulation based on Start & End Time

Hello Friends,
My client is into Vessel Hiring & the Vessels are given on hire for fixed period (with clear start & end dates & time).
For the above scenario we have a Periodic Contract to BIlling cycle which generates Invoices for every month. while creating the Contract we enter Basic Price as Day-Rate (Calculation type in Condition - O - Quantity - Daily Prices)
Thus the system automatically calculates the Basic Price Condition value based on number of days in any month.
Now the issue here is the client wants system to take Start & End time into consideration. In the Contract header - Contract Data tab we have developed two additional fields (Z-Fields) that capture start time & end time for every Contract.
So, we want system to calculate the Basic Price Condition value based on the Contract start date + Contract Start time.
Example :
1. Contract start date - 25.03.2010 & Start time = 12:00 noon. Basic Price = Rs. 10,000 per day.
2. In the Monthly Invoice, system would calcualte the Basic Price as Rs. 70,000 (7 days i.e. 25.03.2010 to 31.03.2010)
But here the client wants system to consider Start Time & determine Value as Rs. 65,000 as the Contract started on 12:00 noon on 25.03.2010.
Can anyone tell me how to achieve this?
I guess we should develop some routine (in VOFM) & apply it in Pricing Procedures.
But can some expert guide me on the logic of the routine & exactly where to apply the same in Pricing Procedure...
Thanks,
Jignesh Mehta

Hi,
Develop routine and make combination
if start date is xyz and start ime is less that 12 then price is so on so
if date start date is xyz and satrt time is more that 12 then price is so on so.
Hello I am not ABAPer, still tried to suggest you,don't mind for my suggestion
Kapil

Adjusting Start / End Time on Apple TV

Hello everyone,
In iTunes, we have the ability to adjust the Start / End time of a song or video by right-clicking the media > Get Info > Options. Then when we playback the media the next time, it will use the settings to determine how far into the media it should start and stop. Is there any way for these settings to get passed through to the AppleTV?
- Thanks

I would also like an answer to this! The original Apple TV applied the custom Start and Stop times, however the new one ignores them and plays the whole video file! Very annoying! Any solutions out there?

Is there a way to set/change default event start/end time?

Is there a way to set or change the default start and end time for events?

This question/problem applies to OS X Mavericks as well. I wish I could change it.

Room Booking - unavailable if start / end time is :15 or :45

Hi all,
First apologies if this is in the wrong forum.
Due to the way our school day runs, we need to be able to book rooms from :15 and :45 (e.g. 10.15 to 11.15, 11.45 to 12.45).
You can change the start / end time manually but if you do the rooms do not show as available and the suggested times only work for :00 or :30.
Is there a way to change it so the rooms can be booked for a wider variety of times?
I've googled this endlessly and the only thing I can really find that might be applicable is changing the timeincrement but I think that only applies to the calendar view and the start / end time showing 15 minute increments instead of 30 as default but
does not have any impact on room availability.
Hopefully someone can help.
Thanks a lot

Hi Chris,
It is by design and we cannot change the time slot displaying. Your understanding would beappreciated.
Besided, it is recommended to add an End date for a recurrent meeting.
Refer to:
http://office.microsoft.com/en-us/outlook/HA011276781033.aspx
http://office.microsoft.com/en-us/outlook-help/best-practices-for-outlook-2007-HA010371521.aspx
Fiona Liao
TechNet Community Support

Logging start & end time of map execution

Hello,
I want to log start & end time of execution of my map (OWB 11g), so I've created a table for this purpose and I used it in every map that I want to log time, twice; First for logging start time, and second for end time.
I pass a constant with SYSTIMESTAMP value through my log table and also name of my map. but the problem is, both of my records' time (start & end) are very near to each other (difference is in milliseconds!) however my map takes time for more than 2 minutes! So, I've changed my map Target Load Order to: [log table for start time] + [Main tables of my map] + [log table for end time]. I've set my map Use Target Load Ordering option True, too.
Why it doesn't work? Is there any better solution for logging every map execution time in a table, or not?
Please help me ...
Thanks.

To do that, I have created a view that lists all processes that are running or finished. The view contains fields:
process_name
process_type (plsqlmap, plsqlprocedure, processflow, etc)
run_status (success, error, etc)
start_time
end_time
elapse_time
inserted
updated
deleted
merged
You could insert into your log table using select x from this view after every map, or, how I do it, is to insert into log table after every process flow. That is, after my process flow is complete I then select all of the details for the maps of the process flow and insert those details into my log table.
Here is the SQL for my view. This is for 10.2.0.3. For
CREATE OR REPLACE FORCE VIEW BATCH_STATUS_LOG_REP_V
AS
(SELECT PROCESS_NAME,
PROCESS_TYPE_SYMBOL,
(CASE
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK', 'COMPLETE') THEN 'SUCCESS'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_FAILURE') THEN 'ERROR'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK_WITH_WARNINGS') THEN 'WARNINGS'
ELSE 'NA'
END
) RUN_STATUS_SYMBOL,
START_TIME,
END_TIME,
ELAPSE_TIME,
NUMBER_RECORDS_INSERTED,
NUMBER_RECORDS_UPDATED,
NUMBER_RECORDS_DELETED,
NUMBER_RECORDS_MERGED
FROM OWB_RUN.RAB_RT_EXEC_PROC_RUN_COUNTS
WHERE TRUNC (START_TIME) >= TRUNC (SYSDATE) - 3)
ORDER BY START_TIME DESC;

What happened to display of end times for iCal entries?

I recall that iCal with Snow Leopard showed the start and end times for every entry. If, for example you had "school" on Monday at 10am to Noon, then you would have a block occupying that time slot and on the top edge, it would say "10 AM" and at the bottom edge, it would say "12 PM."
That no longer seems to be the case; I only have the start time. This was a nice, handy feature, esp. when viewing many days, where the time scale isn't close by. suggestions? comments? thanks.

Click the orange fire fox button, then select the History menu, the option to clear recent history is there.
If you want, you can access the old style menus by pressing either Alt or F10.

ITunes Match on Apple TV ignores my custom start/end times on tracks

Some of my tracks in iTunes have custom start/end times set (to cut out skits and stuff). These set start/end times are respected by all my iTunes Match devices (iPod and desktop iTunes) except my Apple TV.

Hey guys,
I ended up here for having the same issue. iTunes Match playing the song for 20 seconds or so on Apple TV and then giving me error message saying iTunes is currently unavailable. Try again later. No trouble shooting worked for me as it didn't for you either. After using my apple tv for several months and experiencing occasional glitches that are somewhat similar to this probelm I boiled it down to 2 possible reasons. 1) some kind of bug that is fixable with latest firmwares Apple releases. 2) problems with Apple's servers. My best guess for this particular problem is the server problems because everything was playing fine until yesterday (Saturday) and the current frmware was released few weeks ago. It is strangely coincedental that most glitches seem to appear over the weekends. About couple of months ago I tried to watch an episode from a show and it would tell me the show would be available to watch in 24 hours. The loading was painfully slow. The problem only lasted a weekend. I wouldn't be surprised if the problem disappears tomorrow although I might be wrong.

Start/end times of songs

When listening to and/or shuffling music on my iPod, the songs randomly start in the middle and not in the beinning. Note that iTunes (7.5) automatically disables (unchecks) the start/end times of songs in their respective dialog boxes after "ok" is selected.

Dave,
You're stuck.
Unless you want to duplicate the song and then make your adjustments.
If it were me, I'd put the track I'm interested into GarageBand and cutting it down to just the bit I want and the send that version back to iTunes.
Matt

Start/End times in Custom Formula - OTL

Hi,
Is it possible to access the start,end times of a particular day in a custom OTL Fast-Formula ?
Can someone point me to any links for writing custom Fast-formula.
The [user/Impl Guide|http://download.oracle.com/docs/cd/B53825_07/current/acrobat/121hxtig.pdf] has very limited information on OTL custom Formula.
TIA,
VB

VB,
Look at the seeded time entry rule FF and that will provide you with a sample code which provides access to all the attributes of timecard.
--Shiv

How do I change the start/stop time for multiple songs not just one song at a time?

How do I chnage the start/stop time for multiple songs not just one song at a time?

I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times.

Specific Start/End Times for Playlist Music?

Similar Messages

Maybe you are looking for