Specify list URL target

APEX 4.2.2
When a list contains a bunch of links to pages in different applications and is rendered using a Vertical template, is there a way to specificy that clicking on the link open the target in a new browser tab, similar to the effect achieved by specifying the link's target attribute?
Thanks

internal pagesYes, that does appear to be the case. But I am not sure I understand how "internal page" is defined in this context. If the href attribute does not specify the protocol/host i.e. not just a path /foo/bar, I can understand how the browser might treat the link differently and ignore the target attribute and always open in a new tab. But in the example page, all links are fully specicified of the form http://host/path. So the browser seems to be taking the href attribute and the currently loaded document's URL, parsing and comparing the host name in the 2 URLs and therefore determining that the google/amazon/yahoo links are "external" while the apex.oracle.com link is internal?! Somehow, this seems far-fetched/unlikely to me. I think there is something else going on there but I can't locate anything relevant on Google on this topic. Maybe I should head on over to one of the stackoverflow.com sites to see if anyone there has any insights.
Any other ideas, anyone else? Thanks

Similar Messages

"Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct". Performance Point Dashboard Designer (SP 2013), SSRS 2012 Report.

Hello Everybody,
I am using Sharepoint server 2013 , SQL Server 2012 SP1, PerfomancePoint and Reporting Services in SharePoint integrated mode.
I built one report in SSDTusing an Analysis Services Cube. This report has 3 parameters. So the idea is use Dashboard Designer to use this SSRS Report and connect it with some PP Filters.
The issue is that I am always obtaining "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have the following settings in the PP Report:
Server Mode: SharePoint Integrated
SharePoint Site: http://MySharrepointSite:PortNumber/sites/bicenter
Document library : Documents (selected from drop down, my report is deployed to document library)
Report : report.rdl
When I select the report from drop down list its giving the error in a pop up message box as "Unable
to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have tried to use the most simple report, only with one parameter, but is always displaying the error above.
When I open the report directly from documents library its working fine and even it is working fine (
when I deployed the report) but the issue is parameters are not showing.
Any idea? Please help.
Thanks in Advance.

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Set List URL in event reciever

Hello All,
I want to set list url in event reciever element.xml file. Please to resolve this problem.
Thanks.

Hi,
According to your description, you might want to create an Event Receiver for a specific list.
What we need to do is to replace the property "ListTemplateId" with "ListUrl" and specify the relative URL of list in it.
For list:
<Receivers ListUrl="Lists/yourlistname">
For library:
<Receivers ListUrl="yourlibraryname">
Best regards
Patrick Liang
TechNet Community Support

Apex4 bug: 'URL Target' textarea of button definition

Hi,
at Page Definition page when listing button definitions using prev/next buttons and sticking with 'Condition' section view only, 'URL Target' textarea ( 'Action When Button Clicked' section ) doesn't preserve its size.
Thanks

Tom -
I assume this is the prior post you where talking about : https://forums.oracle.com/thread/2401714
However, this doesn't cover my problem. I have tried all the follow, and they all break export / import and copy functionality due to mismatched quotes:
collapse_all($v(P2130_TREE_ID));
collapse_all($v('P2130_TREE_ID'));
collapse_all($v("P2130_TREE_ID"));
collapse_all('&P2130_TREE_ID.');
collapse_all("&P2130_TREE_ID.");
These all allow the collapse button to work.
NOW, if I change my ID tag to be something like 'P_SCOTT_TREE' then everything works just fine (import/export/copy). It's having a number in the tag that is cause the problems because the export is casting it to_char and somehow throwing in an extra quote.
Thanks,
Scott

Using powershell to deploy provider-hosted app and specify remote Url instead of using appinv.aspx page

Hello all,
Could you possibly help me with provider-hosted app development/deployment process.
We developed SharePoint provider-hosted app that works just fine in development environment. Now we need to automate it's installation in test environment via powershell.
In AppManifest.xml that we are deploying we have key instead of explicit URL:
<App xmlns="http://schemas.microsoft.com/sharepoint/2012/app/manifest" Name="ShowAllRoomsApp" ProductID="{922a18aa-5592-b59a-4da9-4791baef02e7}" Version="1.0.0.0"
SharePointMinVersion="15.0.0.0">
<Properties>
<Title>SomeTitle</Title>
<StartPage>~remoteAppUrl/Pages/Default.aspx?{StandardTokens}</StartPage>
If we use as
https://technet.microsoft.com/en-us/library/jj655398.aspx recommends, we cannot specify Redirect Url as we can do this on
/_layouts/appinv.aspx
So now it seems like the only way to deploy this kind of solution is using appinv.aspx page.Or must we apply this URL in AppManifest on developing stage in Visual Studio?
What did I miss?
P. S. Even if I use /_layouts/appinv.aspx after powershell commandlets, I get error.

hi,
to deploy provider hosted app you need 2 things
1. Client ID
2. Redirect URL.
What you can do you can generate app from visual studio using clientID and URL from developer enviornment.
Now a app file is just a simple compressed zip file if you rename it as .zip and extract you will find AppManifest
inside it. So to create an app for Testing enviornment what you have to to Get the CLient ID (from AppRegNew.aspx) in testing enviornment. Unzip .App file change the AppManifest with testing client ID and URL than again zip file and rename as .app.
Now if you upload this file it will work.
To automate this scenerio i have created a simple windows Application in which i Pass the Client ID and StartURl and an App File it unzips the app file make changes to app and again zip it.
public static class AppPackageHelper
public const string StartUrlExpression = "{0}?{1}";
public const string StandardToken = "{StandardTokens}";
public static string Publish(string appPath, string ClientId,string StartUrl)
string tempDir = string.Empty;
string outPutFile = string.Empty;
try
string parentDir = System.IO.Path.GetDirectoryName(appPath);
outPutFile = System.IO.Path.Combine(parentDir, ClientId + "-Winshuttle.app");
tempDir = System.IO.Path.Combine(parentDir, ClientId.ToString());
Directory.CreateDirectory(tempDir);
int lastInd = appPath.LastIndexOf('.');
string tempPath = string.Empty;
string targetFilePath = string.Empty;
string cabPath = System.IO.Path.Combine(tempDir, System.IO.Path.GetFileNameWithoutExtension(appPath) + ".cab");
FileInfo fInfo = new FileInfo(appPath) { IsReadOnly = false };
File.Copy(appPath, cabPath);
XDocument doc = null;
string appManifest = string.Empty;
using (ZipArchive zipArch = ZipFile.Open(cabPath, ZipArchiveMode.Update))
appManifest = string.Format(@"{0}\AppManifest.xml", Directory.GetParent(cabPath).FullName);
ZipArchiveEntry manifestEntry = zipArch.Entries.LastOrDefault(e => e.Name.ToLower() == "appmanifest.xml");
manifestEntry.ExtractToFile(appManifest);
doc = XDocument.Load(appManifest);
XNamespace ns = doc.Root.GetDefaultNamespace();
string defaultUrl = string.Format(StartUrlExpression, StartUrl.TrimEnd('/'), StandardToken);
doc.Descendants(XName.Get("StartPage", ns.NamespaceName)).First().Value = defaultUrl;
doc.Descendants(XName.Get("RemoteWebApplication", ns.NamespaceName)).First().Attribute(XName.Get("ClientId")).Value = setupInfo.ClientId.ToString();
doc.Save(appManifest);
if (manifestEntry != null)
manifestEntry.Delete();
zipArch.CreateEntryFromFile(appManifest, "AppManifest.xml");
int totEnt = zipArch.Entries.Count;
for (int e = 0; e < totEnt; e++)
if (zipArch.Entries[e].Open().Length == 0)
//if (zipArch.Entries.Count > totEnt && e >= totEnt) break;
//zipArch.CreateEntry(zipArch.Entries[e].FullName);
File.Delete(appManifest);
if (File.Exists(outPutFile))
File.Delete(outPutFile);
File.Move(cabPath, outPutFile);
return outPutFile;
catch
throw;
finally
if (System.IO.Directory.Exists(tempDir))
System.IO.Directory.Delete(tempDir, true);
return outPutFile;
using System.IO.Compression.FileSystem.dll.
Also if you want to do it using powershell You need to do the same thing unzip-> changes values-> zip
So basic thing is You need to ahve only valid AppManifest file which contains 2 valid values Client Id and StartUrl
if you changes it inside appmanifest manuall than it will also work. Using above code you can create a console Application to do it. You can use powershell it just that i dont know how to zip unzip in powershell but i am pretty sure you can easily find it
on searching.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

URL target on a button. What is the syntax??

I can't for the life of me fine any references to the syntax for the URL target attribute of a button. What is it?
I need to execute a javascript function prior to leaving the page via a button. Do I place its call in the URL target? I actually want to redirect to a page in the current application but there is no place to create 'additional link attributes' like in a column link.
any help appreciated.
regards
Paul P

Paul,
I may have a work around for you. Here are the steps I took to call a function and then branch to another page.
</br>
<ol>
<li>Create a 'Display as Text' item, do not enter a label value and select 'No Label' for the template option.</li>
</br>
<li>In the Pre Element Text area insert an opening anchor tag with the following text href="javascript:function()" replace 'function' with the actual name of the function you would like to call and enter any parameters.</li>
</br>
<li>In post element text close your anchor tag.</li>
</br>
NOTE for steps 2 and 3 you can also inclue an img tag to make the display item appear to be a button. Otherwise you can enter any text in the default value and that is your link.
<li>In the very last line of your function add the folowing text: doSubmit('NewPage');</li>
<li>Create a page branch and set the page attribute to the desired page. ex. 160</li>
<li>Set its condition to"Request = Expression 1"and enter the text "NewPage" for Expression 1</li>
</ol>
This will call your function and then the submit at the end of the function will trigger the branch to a new page.
Let me know if it helps or if you could find a better way.
- Ghoulies

Where do I specify the URL to test for my load testing project?

When we create a WebAndLoadTestProject in VS 2013, the only place where I can specify the URL that I actually want to test is by adding a Web Performance test to the project and specifying the URL in the recording tool.
Does this mean that I cannot have a load test without having a web performance test?
Because I've searched a lot and I don't find any other place where I can specify the URL that I want to test.
And all the blogs that are out there also talk about having both the web performance test and the load test together. I never come across a single one that explains having a load test without a web performance test.
So my question is; Can I or can not I have a load test without a web performance test? If I can, then where do I specify the URL that I want to test against ??

A Visual Studio Load Test is a thing that runs other tests, looks after their results and collects some timing data. A load test can run large numbers of other tests to simulate big loads. On its own a load test does not do anything. Load tests are
really good at running Web Performance Tests and collecting their results. Load tests can also run Coded UI tests and unit tests.
The URL used in a Web Test can be derived from a context parameter. The Web Test command "Parameterize Web Servers" can be used to change all the URLs in the requests to context parameters.
Load Tests can also specify context parameters and any values they specify will override the parameter values specified in a Web Test.
Regards
Adrian

Get site collection url, site url and list url from a full uri?

If I have incoming: only URI's of the format http://a.b.c/d/e/f/g/h/i/j/k/l/m/n/o/p.docx
(And these are coming from multiple farms and multiple site collections) (and i have a web api on some remote server) (and have all the authentication details)
And I want to query just the single the item via csom : check one column and if value="yes" then download the doc:
a. how do i get the absolute site url out of it for " clientcontext ctx = new clientcontext(THISURL) "
b. how do i then get the list uri out of it to push a caml query to to then retrieve it
I could :
a. strip off the filename, that is the easy part :)
b. I could paste "/_api/contextinfo" behind it and POST it first as a httprequest. Then first get the site and web url and later on
find a way to find the list url (which is probably the first item behind the fullWebUrl), but it seems weird to mix this in the mix
Basically im looking for something that tells me what is what in http://a.b.c/d/e/f/g/h/i/j/k/l/m/n/o/p.docx

Sorry, GetList is only available in the O365 version of Microsoft.SharePoint.Client. If you could test for a root site collection and if there is not one then take the scheme ... + Uri.segments[0] and then get the context. After that you can use
the GetFileByServerRelativeUrl. The following demonstrates this.
public static void GetFileList()
string fileUrl = "http://basesmc15/teamonesubone/teamsubonesubone/Shared%20Documents/folderholder/newauthor6.pdf";
Uri fileUri = new Uri(fileUrl);
Uri webUrl;
ClientContext rootContext = new ClientContext(fileUri.Scheme + Uri.SchemeDelimiter + fileUri.Host);
webUrl = Web.WebUrlFromPageUrlDirect(rootContext, fileUri);
ClientContext subContext = new ClientContext(webUrl.ToString());
File file = subContext.Web.GetFileByServerRelativeUrl(fileUri.AbsolutePath);
List list = file.ListItemAllFields.ParentList;
subContext.Load(list);
subContext.ExecuteQuery();
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

ORA-39186: No tablespaces in the specified list exist.

HI All
I have problem with dbms_datapump
I have 11.2.0.2 in AIX when I use PLSQL
declare
lv_ts_list VARCHAR2(200) ;
lv_data_ts VARCHAR2(100) :='TD1M20120501';
lv_idx_ts VARCHAR2(100) := 'TI1M20120501';
lv_filename VARCHAR2(200) := 'TTS.PBEB_AS1.20120501.dmp';
lv_logname VARCHAR2(200) := 'TTS.PBEB_AS1.20120501.log';
pv_directory VARCHAR2(200) := 'UPA_OS_COMM_DIR';
ln_handle number;
begin
-- lv_ts_list:='('''||lv_data_ts||'''),('''||lv_idx_ts||''')';
ln_handle:=dbms_datapump.open('EXPORT','TRANSPORTABLE',NULL);
dbms_output.put_line('--->TABLESPACE'||lv_ts_list);
dbms_output.put_line('--->file :'||lv_filename);
dbms_output.put_line('--->log:'||lv_logname);
dbms_output.put_line('--->DIR:'||pv_directory);
dbms_datapump.add_file(ln_handle,lv_logname,pv_directory,filetype=>dbms_datapump.KU$_FILE_TYPE_LOG_FILE);
dbms_datapump.add_file(ln_handle,lv_filename,pv_directory,filetype=>dbms_datapump.KU$_FILE_TYPE_DUMP_FILE);
dbms_datapump.metadata_filter(ln_handle,'TABLESPACE_LIST',lv_ts_list);
dbms_datapump.start_job(ln_handle);
end;
in our test environment is all ok but in test env our PLSQL failed
Starting "SVC"."SYS_EXPORT_TRANSPORTABLE_15":
ORA-39123: Data Pump transportable tablespace job aborted
ORA-39186: No tablespaces in the specified list exist.
Job "SVC"."SYS_EXPORT_TRANSPORTABLE_15" stopped due to fatal error at 10:52:26
when I replace
dbms_datapump.metadata_filter(ln_handle,'TABLESPACE_LIST',lv_ts_list); with list of tablespace dbms_datapump.metadata_filter(ln_handle,'TABLESPACE_LIST','''TD1M20120501'',''TI1M20120501'''); all work ok
Do You have any idea ?
thank You Brano

Hi
Pelase review:
DataPump Export TRANSPORT_TABLESPACES Fails With Error UDE-19 [ID 791221.1]
Regard
Helios

URL Target to https internal site?

Hi,
I have a button with a URL Target to an internal php server. I want to call this server using https. This is the only way the server people will allow. I have done this using http before. But with the url https, I can't get the page. We use version 3.1.1.00.09
I'm not a dba so any suggestion on what needs to be changed would be greatly appreciated.
Thanks,
DM

Do you have a valid SSL certificate/IIS binding for "https://webserversp01"?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I want to connect to remote databases which can be specified by URL

Hi,
i'm tinu
I want to connect to remote databases which can be specified by URL
the database is ORACLE 9i
pls help me, how to connect to it
i have the ip address,port address,sid,username and password of the database
is there any difference in the actual code of database connection
plss help

Hi,
There is a particular example with MS SQL 2000 in thread http://forum.java.sun.com/thread.jspa?threadID=608314
In the given example you just need to change the database URL and the JDBC driver. Just examine the code a little bit.
Also you may wish to visit the SUN's JDBC tutorial on http://java.sun.com/docs/books/tutorial/jdbc/
Ferad Zyulkyarov

Is it possible to have duplicate columns from source List to target List while copying data items by Site Content and Structure Tool in SharePoint 2010

Hi everyone,
Recently ,I have one publishing site template that has a lot of sub sites which contain a large amount of content.
On root publishing site, I have created custom list including many custom fields
and saved it as template in order that
any sub sites will be able to reuse it later on . My scenario describe as follows.
I need to apply Site Content and Structure Tool to copy   a lot of items
from one list to another. Both lists were created from same template
I use Site Content and Structure Tool to copy data from source list
to target list as figure below.
Once copied , all items are completed.
But many columns in target list have been duplicated from source list such as PublishDate ,NumOrder, Detail as
figure below .
What is the huge impact from this duplication?
User can input data into this list successfully
but several values of some columns like “Link column”
won't display on “AllItems.aspx” page
. despite that they show on edit item form page and view item form page.
In addition ,user can input data into this list as above but
any newly added item won't appear on
on “AllItems.aspx” page
at all despite that actually, these
item are existing on database(I try querying by power shell).
Please recommend how to resolve this column duplication problem.

Hi,
According to your description, my understanding is that it displayed many repeated columns after you copy items from one list to another list in Site Content and Structure Tool.
I have tested in my environment and it worked fine. I created a listA and created several columns in it. Then I saved it as template and created a listB from this template. Then I copied items from listA to listB in Site Content and Structure Tool and it
worked fine.
Please create a new list and save it as template. Then create a list from this template and test whether this issue occurs.
Please operate in other site collections and test whether this issue occurs.
As a workaround, you could copy items from one list to another list by coding using SharePoint Object Model.
More information about SharePoint Object Model:
http://msdn.microsoft.com/en-us/library/ms473633.ASPX
A demo about copying list items using SharePoint Object Model:
http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-copy-list-items-in-a-generic-way/
Best Regards,
Dean Wang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Where shoould i specify about my target system in XI.

Hi all!
Xi sends XML file to my J2EE application.I am using HTTP adapter as receiver.
I have given the following info in outbound HTTP communication channel:what else to be specified in ID
Adapter type: HTTP
Message protocol: Xi payload in HTTP body
Transport protocol: HTTP 1.0
Adapter Engine: Integration Server
Addressing Type: URL
Service number:7001 (BEA Weblogic 9.0 application server)
Path: /InvokeJ2EE/SendName/
Target host:localhost(is where my J2EE appl reside)Authentication Type: Use Logon adat for SAP system
Username: xiappluser
password:xxxxx
Content Type: text/xml
XML code:UTF-8

Hi Datta,
Are you getting any error over here..?
Target host is the host name where application resides
Just go thru this link-
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm
Hope this helps,
Regards,
Moorthy

Where should i specify about my target system in XI

Hi all!
Xi sends XML file to my J2EE application.I am using HTTP adapter as receiver.
I have given the following info in outbound HTTP communication channel:what else to be specified in ID
Adapter type: HTTP
Message protocol: Xi payload in HTTP body
Transport protocol: HTTP 1.0
Adapter Engine: Integration Server
Addressing Type: URL
Service number:7001 (BEA Weblogic 9.0 application server)
Path: /InvokeJ2EE/SendName/
Target host:localhost(is where my J2EE appl reside)Authentication Type: Use Logon adat for SAP system
Username: xiappluser
password:xxxxx
XML code:
Content Type: text/xml
UTF-8

Hi Datta,
Are you getting any error over here..?
Target host is the host name where application resides
Just go thru this link-
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm
Hope this helps,
Regards,
Moorthy

[Solved] How to specify -source and -target=1.5 in Compiler settings

Hi forum
I'm looking for a way to get my generics-based code to compile in JDeveloper 10.1.3.1. As you know, generics require "-source=1.5" and "-target=1.5", but I have not been able to get JDeveloper to compile with this setting. I am using javac as compiler and has checked "Use javac", but if I specify "Default" in the "Source" option, JDeveloper compiles with "-source=1.3" and "-target=1.2", and there's only 1.2, 1.3 and 1.4 in the list to choose from apart from "Default", not 1.5 for some reason.
Changing Compiler settings under "Default project settings" doesn't seem to do anything, it stills compiles for 1.3 when choosing Default - which of course means, that my generics won't compile, as it complains about wrong -source setting.
Can someone help me out here? I've done a search here on the board without finding the answer.
Thanks,
Jacob

My about-box reads:
"Studio Edition Version 10.1.3.1.0.3984"
"Build JDEVADF_10.1.3.1.0_NT_061009.1404.3984" (arrgh, please make an option to copy/paste this...)
Have you accidentally switched 2 ciphers, Frank? By the way, I found the reason for this - I had set the "J2SE version" under "Libraries" to "1.4.2_06" earlier to make sure about 1.4.2 compatibility - but since we soon don't need this any longer, I'm switching this value to 1.5.0 to be able to fully utilize 1.5 options in my code.
So... I guess we can say, that this was my own fault.
Thanks,
Jacob

Specify list URL target

Similar Messages

Maybe you are looking for