Specify Oracle Application Server EM Port in \ETC\SERVICES File - Help

Hi,
Can anyone tell me what to soecify in the /ETC/SERVICES file for Oracle Application Server Enterprise Manager Console 9.0.4 , so that the port is not used by any other process.
I have had situation where a rogue process was using port 1810 and was preventing the console from loading up.
Can anyone help??
I have to do this on a production system.
Thanks

Did you get an answer to this question?
I'm looking for the same information thanks to a rougue piece of software that removed my entry in /etc/services for port 1810 during it's install. I don't know what the service name should be. Of course - there was no backup copy of this file made prior to the install. It's a development box, so it doesn't get backed up often.
I can get the infra page to load fine, but the midtier page will not load.
I'm curious to know if you ever found anything on this.
Thanks,
Deb

Similar Messages

Oracle Application Server 10g Forms and Reports Services

Hi there,
I want to install Oracle Application Server 10g Forms and Reports Services. What must I download? The installation guide says that "Oracle Application Server 10g (9.0.4) Forms and Reports Services allows you to install and configure Forms and Reports Services without the need to install and configure all of Oracle Application Server 10g (9.0.4)" but it does not clearly state what exactly to download.
Oracle Application Server 10g Release 2 (10.1.2.0.2)
[http://www.oracle.com/technology/software/products/ias/htdocs/101202.html]
or
Oracle Developer Suite 10g (10.1.2.0.2)
[http://www.oracle.com/technology/software/products/ids/htdocs/101202winsoft.html]
Faoilean.

You might find better assistance in the APplication Server forum - Oracle Application Server - General

Deploying Jave portlet on Oracle Application Server 10g

I have installed Oracle 10g Application server, donwloaded and installed JDevleoper 9.0.5.1 and the latest Java Portal Development and as well as the JDeveloper portlet-addin. Now, I followed the instructions from the http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/BUILD.JSR168.PORTLETS.USING.JAVA.PORTLET.WIZARD.9IJDEVELOPER.HTML
On using JDeveloper addin wizrd to create a java portlet and so far so good. However, I am stuff on the last bit on deployment. It document says "# Now use the URL provided in the log page at the bottom of JDeveloper to get part of your URL (e.g. http://myserver.uk.oracle.com:8888/my-portlet) and complete the URL.
http://myserver.uk.oracle.com:8888/my-portlet/portlets?WSDL
Now use this URL to register your portlet with OracleAS Portal.
But when i deploy my application (just a test thing), from the deployment tab I get:
---- Deployment started. ---- 22-Mar-2005 14:11:27
Target platform is Oracle Application Server 10g (hotseatConnection).
Wrote WAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.war
Wrote EAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear
Invoking DCM servlet client...
C:\Java\j2sdk1.4.2_03\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Java\JDeveloper9.0.5.1\jdev\lib\oc4j_remote_deploy.jar http://194.83.41.114:1811/Oc4jDcmServletAPI/ ias_admin **** redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = c253297271317c3f930003c405ea91ff598582f0be0
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
Exit status of DCM servlet client: 0
Elapsed time for deployment: 1 minute, 45 seconds
---- Deployment finished. ---- 22-Mar-2005 14:13:12
My question is, HOW DO I ACCESS the deployed application, since it didn't specify the URL where it's deployed????
Many thanks
P/S
I have tried:
http://{myserver}:8888/{my-portlet}/portlets?WSDL but that doesn't work

Hi FormsEleven,
When you say you can do this or you have done for demo then considering following directory structure if I have two forms having common form names how it will be resolved?
Or how the url to access these forms will be?
As shown in the following structure consider we have Form1 in sub directory1 as well as in sub-directory2 then how the link to access these forms will be?
- Hosting Directory (formsweb.cfg entry)
- Sub Directory1
      - Form1
      - Form2
- Sub Directory2
      - Form1
      - Form4
- Sub Directory3
      - Form5
      - Form6

Oracle Application Server 10g R2 and UniVerse

Has anyone had any experience trying to implement App Server with non-oracle database such as UniVerse. I'd only like to find out if it is possible and where I can get documentation on how to go about this. Any replies are appreciated. Thanks in advance for your time.

Hi,
Can you tell us more details about your intentions and business challenges ? After reading your question, I think you are looking for one of these scenarios :-
1. Using the IBM Universe Database as the Metadata Repository for the Oracle Application Server.
It's not possible - Oracle Application Server is married to the Oracle Datbase & you can't use anything else as an MR.
2. Accessing the IBM Universe Database from an Web Application.
I think this depends on the Technologies used in the Web Applciation ( J2EE, PHP, etc. ) & the level of support offered by the Oracle Application Server ( OC4J, J2EE Libraries, etc. ) . If this is what you are looking for, can you tell us more about the application & the challenges you are facing ?
Regards,
Sandeep

Connect oracle application server 10g with oracle database 9i

Hello, I am doing a project with Oracle Application Server and application server can not connect with my Oracle 9i database, how do my version of Oracle Application Server is the 10g, thanks for the help and excuse my English

Well, now it depends how do you want to access your 9i database from Application Server via J2EE application deployed at Application Server or via Portal.
For J2EE application, you can use connect string for your 9i database in datasources.xml of J2EE app.
For Portal application, again it depends what you want to do - create an data entry application or just want to fetch a report based on 9i database.
Hope I have provided answer to your question.
Regards.

Career Opportunity: Oracle Application Server Administrator

RESPONSIBILITIES
The Office of Information Technology at the University of Nevada, Las Vegas is seeking candidates for an Oracle Application Server Systems Administrator. This is a full-time, 12-month professional position. This position will afford the successful candidate the opportunity to get involved in early stages of an exciting new campus-wide portal initiative. The incumbent will be responsible for current and future campus-wide deployment of Oracle Application Server. Job responsibilities include:
* Installing and maintaining a multi-tiered Oracle Application Server environment
* Working with developers to configure, deploy and troubleshoot custom applications
* Implementing, configuring and managing:
- Oracle Portal
- SSO, OID and SSL/PKI
- Oracle HTTP Server (Apache)
- Oracle Web Cache
- Multiple OC4J Instances
- Disaster recovery
The development and enforcement of standards and procedures is required in order to provide the necessary customer support. The position will be responsible for research, development, planning and deployment of new technologies in the Application Server/Portal domain.
The incumbent must be able and willing to perform enterprise system administration tasks as both a primary and secondary responsibility. The existing enterprise server environment includes Sun Solaris, Microsoft Windows 2003, Red Hat Linux, Mac OS X and applications such as Oracle, Lotus Domino / Notes and Web CT. The position requires high ethical standards along with attention to detail, a team orientation and a strong commitment to deliver high quality customer service.
QUALIFICATIONS
Required: Bachelor's degree from an accredited college or university. Must have at least three years of experience in systems and security administration, systems analysis, software version upgrades and implementation on an application server platform.
Preferred: A Bachelor's degree in Computer Science, MIS, or related technical field is preferred. Professional certification and application development / scripting experience is a plus. Although an understanding of the architecture and components of Oracle Application Server (including Portal) and directory services is preferred, training will be provided for an enthusiastic candidate that is willing to learn.
SALARY RANGE
Salary competitive; contingent upon labor market. Position is contingent upon funding with a minimum starting salary of $65,000.
SETTING
UNLV is a doctoral-degree-granting institution with more than 28,000 students and more than 900 faculty members. More than 220 undergraduate, master's, and doctoral degrees are offered. Founded in 1957, UNLV is located on 337 acres in dynamic Southern Nevada. The university is ranked in the category of Doctoral/Research Universities-Intensive by the Carnegie Foundation for the Advancement of Teaching. For more information, visit us on-line at: http://www.unlv.edu.
APPLICATION DETAILS
Submit a letter of interest, a detailed resume listing qualifications and experience, and the names, addresses, and telephone numbers of at least three professional references who may be contacted. Applicants should fully describe their qualifications and experience, with specific reference to each of the minimum and preferred qualifications because this is the information on which the initial review of materials will be based. The review of materials will begin immediately, and will continue until the position is filled. Materials should be addressed to Mike Marchand, Search Committee Chair, and are to be submitted via on-line application at https://hrsearch.unlv.edu. For assistance with UNLV's on-line applicant portal, contact Jen Martens at (702) 895-2894 or [email protected].
Application Information
Contact: University of Nevada Las Vegas
Online App. Form: https://hrsearch.unlv.edu

Hi Fredrik
Thank you for reply.
Answers to your questions
1. I tried reinstalling OAS 10g today.
I did not enter the host name and/or domain name during installation, as it took both Automatically.
I see in config files the host name configured as - myhost.mydomain.com
where actual host name = myhost
and domain name = mydomain.com
I did give the domain name while giving the Global database name as
sid.mydomain.com
2. SSO server login is working.I'm able to login with "orcladmin" user, for url
http://myhost.mydomain.com:7779/pls/orasso
3. See the log statement in the log file at path
F:\OraHome_4\Apache\Apache\logs\access_log.1107475200
=======
[04/Feb/2005:17:23:06 +0530] "POST /sso/auth HTTP/1.0" 302 2061
[04/Feb/2005:17:23:06 +0530] "GET /osso_login_success?urlc=v1.4~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
======
The error message is same as before.
Do you see any problem in above mentioned info and steps?Waiting for reply.
Thank You

[XI 3.1] Deployment problems to Oracle Application Server

Hello everybody.
I'm new on BO products, and i have problems with installation on Oracle Application Server 10.1.3
BuildVersion=12.1.0.882.BOE_Mira_RTM
I have success installed OAS 10.1.3 (with patch 10.1.3.3.0), and when i'm installing BO following documentation, after installation no any BO applications in OAS found. This is first.
Then i attempt install BO applications (CmcApp, AdminTools, etc...) manualy... I have success installation of CmcApp, but when try it to run, i get error ([logon_error_attach|http://www.sendspace.com/file/u8gyoj]), page with logo BO, but logon form (logon.faces) could't be found... i think *.faces on OAS does not work/support, it must be something like *.jsp, *.jspx, but not *.faces, or i must configure OAS in special way.
Any suggestions?
Thanks, Evgeny.
Spasibo)
p.s. With Tomcat which comes with BO all works fine.
from documentation
To use a Java web application server, select Java Web Application
Server and choose one of the following options:
Automatically deploy to a pre-installed Web Application Server.
This will prompt you to enter the configuration and authentication
information on the next screen.
Admin is Secure?: Select this option to use Secure Sockets Layer (SSL) encryption for authentication.
Note:
If Admin is Secure? is not selected, you will still have to specify the username and password to access the server.
u2022 Port: Administration port of the application server (for example u201C6003u201D). This should be the request port of the <notification-server> element in the opmn.xml file.
u2022 Username: User with administration rights to the application server.
u2022 Password: Password for account with administration rights to the application server.
u2022 Server Instance: Name of the Oracle Application Server application server instance (for example u201Chomeu201D).
u2022 Server Name: Name of the target application server (for example, u201Cmyserver.domain.comu201D).
u2022 Group Id: Name of the server group to which the target application belongs (for example "Default_group").
u2022 Application Server Installation Directory: The directory where the web application server is installed
(for example C:\product\10.1.3\OracleAS_1).

Thanks, guys for reply.
To Denis Konovalov: Привет! Есть один срочный вопрос, не мог-ли бы ты мне на него ответить. если есть возможность, напиши, пожалуйста, на evgeny (точка) shekalev (собака) гмэйл.ком (защита стоит - не разрешают общаться ) - p.s. куда приятней общаться на родном) p.p.s. обещаю, сильно мучать не буду ))

How to Deploy ECperf on Oracle Application Server

Hi,
I have deployed the ECperf benchmark on Oracle Application Server. I am trying to run the driver.sh script from ECperf/bin directory. I have got the following error while running the driver.sh
O1:0: Failure looking up home javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
O1:1: Failure looking up home javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
O1:2: Failure looking up home javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
O1:3: Failure looking up home javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
O1:4: Failure looking up home javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
Is there anyone who knows this problem?
Thanks,
Hari Duche

I'm going to guess and say that you are using Developer Suite based on your reference to port 8889. Assuming this is true, did you start OC4J? If so, a DOS window will open - do NOT close this window as it will terminate OC4J.
Also, what happens if you open a browser and enter the Forms URL directly?
http://lki:8889/forms/frmservlet?config=zodynas

Configuring Oracle Application Server to use a user friendly url

Hi All,
I am having trouble configuring the apache httpd.conf file within an applicaton server to be able to use user-friendly urls for the infrastructure identity management tools server. I also need this for security reasons as well as hardware reasons - loadbalancing.
At the moment I have a standard setup, whereby the sso application server is using port 7777. I would like the user not to enter the port, but to enter just a standard url, like http://login.<company>.com.au, so that if the user needs to modify oid using the oiddas web application, they can enter something like http://login.<company>.com.au/oiddas/ rather than http://<machine host name>:7777/oiddas/. This would also be used by portal for sso logins.
From the standard installation, Apache was configured as follows:
Port 7777
Listen 7777
ServerName <machine host name>
DocumentRoot <root document folder>
Now reading the documentation from the Oracle Application Server Installation notes for the Http Server, they document how to do this (in the loadbalancer section - this will eventually be used in the hardware setup):
Port 80
Listen 7777
Listen 80
# Virtual Hosts
# This section is mandatory for URLs that are generated by
# the PL/SQL packages of the Oracle Portal and various other components
# These entries dictate that the server should listen on port
# 7777, but will assert that it is using port 80, so that
# self-referential URLs generated specify www.oracle.com:80
# This will create URLs that are valid for the browser since
# the browser does not directly see the host server.oracle.com.
NameVirtualHost <machine ip>:7777
<VirtualHost <nameofmachine>:7777>
ServerName login.<company>.com.au
Port 80
</VirtualHost>
# Since the previous virtual host entry will cause all links
# generated by the Oracle Portal to use port 80, the server.company.com
# server needs to listen on 80 as well since the Parallel Page
# Engine will make connection requests to Port 80 to request the
# portlets.
NameVirtualHost <machine ip>:80
<VirtualHost <nameofmachine>:80>
ServerName login.<company>.com.au
Port 80
<VirtualHost>
Note that I used slightly different names for the url's rather than the oracle names www.oracle.com and server.oracle.com
Now after applying this, I noticed not only could I not go to the oiddas from the original machine name, but also couldnt go there from the new machine name.
Also I was not even able to go to the standard index page whereby you can go to the enterprise manager for the application server, from either names.
The following urls provide me with "The Page Cannot Be Displayed" error message:
http://login.<company>.com.au:7777/
http://<nameofmachine>:7777/
The following urls provide me with "Page Under Construction" error message:
http://login.<company>.com.au/
http://<nameofmachine>/
Could someone please tell me why this is the case, considering I am using the installation procedures Oracle has published within the Oracle Http Server Admistrators Guide (http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14007/netconf.htm#sthref379).
Cheers
Rodney

Hi Rondey,
Ik think that I can see your probleem.
Just change the following line at your httpd.conf, then restart the component.
First of all if the port is installed with nr. 7777. then the listen process will be on port 7778
the second thing is just try to do the following steps
((Port 80 to Port 7777)))
Listen 7778
%%%% In loadbalancer section %%%%%%
just add the following lines
Listen 80
Listen 8103
Listen 8102
NameVirtualHost *
NameVirtualHost *:8103 or 80
If you want to use this ports (8103 or 8102) for other site (url), then
<VirtualHost *:80>
ServerName <machine ip> or (host name)
Hear from U,
Regards,
Hamdy

Oracle Application Server 10.1.3.3.0 OC4J Restarting

Oracle ADF application is deployed to the AS from JDeveolper 10.1.3.3.0 and runs fine initially but after continual use the OC4J returns a runtime exception and restarts.
1. This instance is not associated with an infrastructure but it is on a server with 10.1.2.2.0 Infra and middle tier instances.
2.The error occurs while using a web app. It all works fine at first, can nav pages, view records from the db just fine. Then after say 15mins the page returns Internal Server Error message at which time I check the Oracle app server ctrl to find the error below. That error is displayed in the actual app server ctrl page.
After a few minutes I can refresh the web app page and it returns to the home page working fine again until the next exception and restart. Sometimes as a result of this issue the server will not OC4J will not restart and the page will stop working altogether. At this point I cannot ever restart the OC4J. I have to Restart the entire server machine.
An error has occurred.
Caught exception calling invoke on oc4j:name=Singleton,type=OpmnConfig
Exception thrown in RequiredModelMBean while trying to invoke operation invoke
Object reference no longer valid (disconnected)
Object reference no longer valid (disconnected)
Hide Additional Trace Information
oracle.j2ee.admin.jmx.exception.config.ConfigMBeanException:
Caught exception calling invoke on oc4j:name=Singleton,type=OpmnConfig
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invoke(OpmnProxyUtil.java:204)
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invokeSingle(OpmnProxyUtil.java:129)
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invokeSingle(OpmnProxyUtil.java:99)
at oracle.oc4j.admin.management.farm.mbeans.OpmnConfigAgr.getNotificationServerAttrs(OpmnConfigAgr.java:200)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.invoke(LocalizationFilterMBeanServer.java:579)
at oracle.oc4j.admin.management.farm.util.OpmnProxyUtil.invoke(OpmnProxyUtil.java:202) ... 50 more
Caused by: java.io.IOException: Object reference no longer valid (disconnected)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.invoke(RemoteMBeanServer.java:820)
at oracle.oc4j.admin.management.farm.mbeans.JVMAgr.invoke(JVMAgr.java:1481)
at sun.reflect.GeneratedMethodAccessor40.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.reflect.misc.Trampoline.invoke(MethodUtil.java:36)
at sun.reflect.GeneratedMethodAccessor18.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585) at sun.reflect.misc.MethodUtil.invoke(MethodUtil.java:239)
at javax.management.modelmbean.RequiredModelMBean.invokeMethod(RequiredModelMBean.java:1071) ... 58
more Caused by: com.evermind.server.rmi.RMIConnectionException: Object reference no longer valid (disconnected)
at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:60)
at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:28)
at com.evermind.server.ejb.StatefulSessionRemoteInvocationHandler.invoke(StatefulSessionRemoteInvocationHandler.java:38)
at __Proxy8.invoke(Unknown Source) at oracle.oc4j.admin.jmx.client.MBeanServerEjbRemoteSynchronizer.invoke(MBeanServerEjbRemoteSynchronizer.java:144)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.invoke(RemoteMBeanServer.java:816) ... 68 more

Greetings,
First I would recommend turning up your logging level to FINEST to glean more informatin regarding the error that is occurring. Please post these data along with any related Messaging service configuration information. It is possible that two services are attempting to make the same connection and it is causing one or the other to fail. You might also review the information in your opmn config file. Does the 10.1.2.2 instance remain running during the OC4j restart?
OPMN Configuration:
10.1.20 How to Specify Ports for State Replication in OPMN
When you deploy an application utilizing state replication in a managed Oracle Application Server, OPMN dynamically allocates the ports that are used to propagate state across the cluster. You can restrict this allocation to a range of ports for an application that has peer-to-peer replication enabled. Specifying ports for state replication might be necessary in an installation with a firewall or network that uses a well-defined port range.
To specify a range of ports for peer-to-peer state replication
Add a <port> element to an OC4J instance configuration in the opmn.xml file.
Specify the name of an application that has peer-to-peer replication enabled as the value of the id attribute of the <port> element.
Specify a range of ports in the range attribute of the <port> element.
For example, for deployment of an application named rac-web that is set up for peer-to-peer replication, the line labeled <port id=rac-web .../> in the following OC4J instance configuration tells OPMN to use ports 15213 to 15214 for state replication:
<port id="default-web-site" range="80-100" protocol="http"/>
<port id="rmi" range="12401-12500"/>
<port id="rmis" range="12701-12800"/>
<port id="jms" range="12601-12700"/>
<port id="rac-web" range="15213-15214"/>
For more information about state replication, see Chapter 9, "Application Clustering in OC4J," in the Oracle Containers for J2EE Configuration and Administration Guide.Quoted from:
http://download.oracle.com/docs/cd/B32110_01/relnotes.1013/b32199/oc4j.htm#CEGICDEF-Michael

Business Publisher in Oracle Application Server

Hi
I am attempting to deploy BPA Business Publisher (10.1.3.4) to an Oracle 10.1.3.4 Application Server and I have very little in the way of instruction or documentation as to how to undertake this task.
The BPA installation and Administration guides state that using an Oracle Application Server is a supported configuration for the Business Publisher with little or no further information on how to achieve this!
I have managed to deployed and configure, to the best of my current knowledge, the businesspublisher.war along with its required data sources, DAO changes, etc.
I can access the Business Publisher web interface and his shows that no exports currently exist.
I have attempt to add the new Oracle Application Server based Business Publisher Server to my Business Publisher Architect (i.e. but it keeps failing to connect and BPA hangs until I force it to end!)
I can see that the BPA Repository host is establishing a connection with the Business Publisher host on port 17059 (the default port) but nothing else happens.
[oracle@***]$ netstat -a | grep 17059
tcp 0 0 *:17059 *:* LISTEN
tcp 111 0 host.domain:17059 host.domain.:2519 ESTABLISHED
I have undertaken a number of successful installation, deployments and exports from BPA to Business Publisher utilising TomCat on Windows, Linux and SUN but have now been completely stopped on how to undertake this on Oracle Application Server.
Can any one point me in the direction of any documentation or information on how to achieve this task?
John

Hi Joseph
Many thanks for the info.
I had raised an SR in Metalink as well as requesting info here and Metalink gave me a ftp link to the document.
This solved my problems as I needed to undertake the extra configurations in opmn.xml, webappserver.cfg and add a .jar file (these are not shown anywhere in the standard BPA admin or install guides!!)
Once all these done it works like a dream and users state it is faster then a Tom Cat based deployment.
Cheers
John

OCS + Oracle Application Server sharring same db and infra

Hi all,
I would like to install Oracle Collaboration Suite in the same machine where runs my Oracla Application server.
The mais ideia is to share the same infrastructure and database from AS to Oracle Collaboration Suite.
Can I do it ?
I'm asking 'cause when I'm trying install collaboration suite to use a existing database as an OCS' repository Oracle Installer gives me a message like this:
"Oracle Home you have specified is not a Oracle10g 10.1.0.4.2 version and cannot be configured into an Oracle Collaboration Suite Database"

Hello,
You shoul read the manual of OCS, but in my opinion you should not share the same database, due management issues.
If you need to do some administration in the OCS with implies a database restart, your application server will be unavaiable as well.
So the best thing is to have diferent DB's to application server and to OCS, and with the right hardware you can have the 2 instances in the same server. You just need to set up the oracle listeners to diferent TCP/IP ports.
Best regards,
Bruno Sousa

Apex Listener vs. Oracle Application Server... advantages?

Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?
We have an existing application server instance in production. Would introducing Apex Listener and the extra overhead be of any advantage?
Thanks in advance for your thoughts.

Hello "Portal Dude",
Are there advantages to installing Apex Listener over using an existing Oracle Application Server instance to serve Apex applications?APEX Listener introduces some additional features, such as Resource Templates, but lacks some others. Some people might want to migrate from OAS to another JEE Container that doesn't come along with a OHS/mod_plsql. Depending on the JEE Container, you could use AJP for load balancing, avoiding plain HTTP through a firewall, etc.
Would introducing Apex Listener and the extra overhead be of any advantage?The "extra overhead" may be smaller than you think. If you don't need the HTTP_Server component any longer, but can just deploy APEX Listener on the OC4J of your OAS, you might even save some bytes.
For several other aspects, there have been a few posts on that topic in the past:
{thread:id=1100122}
{thread:id=1555908}
{thread:id=1594158}
If there's anything you don't find in either the posts or the documentation, don't hesitate to ask.
-Udo

Client-cert auth impl in web.xml does not work in Oracle Application Server

Hi,
I am new to implementing security features on the web applications.. I have developed a new web service using jdev1012 and deployed in OAS 10.1.2. Its working fine according to the business requirements, but I am in need of implementing client-cert authentication to enable the web service available to only those who have client certificate.
My server details are:
Oracle Application Server 10g Release 2 (10.1.2)
Server certificate is in place and SSL mode have been already enabled.. able to access my web service through https://<mydomain.com>/myws/TreqWS as well able to see the WSDL file through https://<mydomain.com>/myws/TreqWS?WSDL.
I tried to include the following in my web.xml file as part of implementing CLIENT-CERT authentication.
<security-constraint>
<display-name>SecurityConstraint</display-name>
<web-resource-collection>
<web-resource-name>WSCollection</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>CLIENT-CERT</auth-method>
<realm-name>WSCollection</realm-name> 
</login-config>
It is not woking as expected, though I have restarted my oc4j container after including this content to the web.xml file. i.e, I am able to invoke the web service though my sample java client program, though I donot have client certificate/keystore.
I believe I am missing something..Can anyone help me in this regard to implement CLIENT-CERT authentication successfully?
Thanks,
Ms

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

How to deploy a web service on Oracle Application Server 10.1.2.0.2?

Hi everyone,
I followed the instructions of the following link to create a web service using jDeveloper 10.1.3.1.0 on Oracle Application Server 10.1.2.0.2. [http://st-curriculum.oracle.com/obe/jdev/obe1013jdev/10131/devdepandmanagingws/devdepandmanagingws.htm#t1]
The web service created was deployed & used with no errors on the standalone OC4J instance.
But my goal is to deploy my web service on Oracle Application Server 10.1.2.0.2.
So after several attempts, I was able to deploy it on the Oracle Application Server 10.1.2.0.2 but unfortunately I didn't know the URL needed to use the web service.
I tried the following link (http://192.168.0.91:18100/JavaWebService-GetDates-context-root/GetDatesWSSoapHttpPort) but also didn't work :(
I also tried converting to J2EE 1.3 and still not knowing how to access the web service.
Please advice with a solution.
Thanks in advance.
Lana

Thanks everyone for your help :)
The problem turned out to be that Oracle application server 10.1.2 is unlike the others servers, it uses 2 ports:
- port (19100) is dedicated for the console.
- port (7779) is to view your applications.
So the URL needed turned out to be "http://acteos-109.beirut.acteos:7779/beanTest" instead of "http://acteos-109.beirut.acteos:18100/beanTest"
Hope this info is useful
Lana

Specify Oracle Application Server EM Port in \ETC\SERVICES File - Help

Similar Messages

Maybe you are looking for