Speed Checker Query & FTTC for Stamford Exchange

Couple of queries, here goes.
I live in Ryhall which is attached to the Stamford exchange, hence the line attenuation is pretty high at 63dB. I've had a fixed rate 1Mbps service on this line for a few years now and after a few tweaks been rock solid. My old Belkin router used to report a Signal Margin of ~12dB, this has now been replaced by a 2Wire unit and the Signal Margin has now improved to 20dB. Interestingly, the Speed Checker on SamKnows has changed its readings to say a fixed 2Mbps is now available (previously a X) and ADSL2+ now 3Mbps. Is this because of the new router and would these rates be achievable in the real world?
FTTC RFS date is now set for the Stamford exchange 01/03/2011 would this include the cabinets in Ryhall?
Thanks, Ozz

Welcome Darren,
Bt Total Broadband is a rate adaptive product, and for new lines a period of line training needs to take place.
The training can last up to 10 days, and during that time no assumptions can be made as to the performance of the line, as various line configurations and speed will be applied by the exchange dslam.
Only at the end of training will you get a true picture.
It's important to leave the hub/router connected 24/7 with no manual resets during this period, so that a line solution can be applied and associated IP profile and SNRm then set.
At times the dslam will drop the connection, as part of the training, all normal.
If after the training period the connection is poor, then effort can be applied to investigate any line and noise issues. 
If you think your line training is finished, then post your hub stats, and a BT speed test and the line connection can be evaluated.
Hope this helps

Similar Messages

  • We are interested to know how/where to check query runtimes for any Query in SAP BW?

    We are interested to know how/where to check query runtimes for any Query in SAP BW?
    Is there any table or program to get the query run time details per query for a particular day.

    Hello Sravan,
    Bex statics tables would be 'RSDDSTATHEADER','RSDDSTATINFO' & 'RSDDSTATEVDATA'. all these can found in one view 'RSDDSTAT_OLAP'.
    above can give historical statistic.
    For current Query statics : T-code RSRT, and select debug mode select display statistics and then execute.
    Once you get the output press F3(one step back), there you can see statics of the query for that particular execution.
    Thanks,
    Mallikarjuna

  • Readiness Checks fail with "The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."

    There's another thread about this issue but the accepted answer actually has nothing at all to do with the original problem/question so that's a bit deceptive.
    Anyway, when trying to install Exchange 2013 SP1 (on 2012 R2 Datacentre) the installation reaches the Configuring Prerequisites part of the Readiness Checks and then fails out with the message:
    The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.
    I honestly can't find any way around this issue and the only mentions I've seen resulted in people reinstalling Windows which obviously isn't really a resolution to the problem.
    Is there any known fix for this issue?

    Ok well I've managed to get around that now by recreating a few registry keys and documented that here (apparently I'm not allowed to create links so can't put that here).
    I have a new issue now though. It seemed to get almost all the way through the installation process but is now failing due to a "memory" issue although due to the wording I can't tell whether it means RAM or Disk space. Either way, neither should
    apply. The drive has 80GB of space available and the machine has 8GB of RAM (only 2GB in use at the time the installer was ran and the amount didn't drop).
    The exact error is...
    Error:
    The following error was generated when "$error.Clear();
    Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
    $FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
    $FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
    Write-ExchangeSetupLog -Info "Loading FipFs snapin";
    Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
    # Copy Microsoft Engine to Engines folder during the install
    $FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
    $MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
    $MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
    $MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
    if(! $MicrosoftEngineExists)
    Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
    " was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
    Error:
    The following error was generated when "$error.Clear();
    Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
    $FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
    $FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
    Write-ExchangeSetupLog -Info "Loading FipFs snapin";
    Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
    # Copy Microsoft Engine to Engines folder during the install
    $FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
    $MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
    $MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
    $MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
    if(! $MicrosoftEngineExists)
    Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
    " was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
    So if it's not the drive (there's only one drive in the machine) or RAM then what exactly has it ran out of?

  • Infinity Speed Very Slow and BT Speed Checker Not ...

    Hi, I’m new here and I’m hoping someone can help me or point me in the right direction with an infinity issue. 
    I’ve had BT infinity for almost 12 months and everything speed wise has been fine until the last month or so.  My modem started to slowly die in January, but this has now been replaced by Kelly Services, the engineer who replaced the modem said the speed would now increase.  It hasn’t and I’m stuck on about a 3mb download connection which is what I was getting previously with Talk Talk.  I usually get a connection speed of between 20 – 30mb (currently advertised as up to 40mb).  I’ve tried numerous times to run the BT speed test whilst wired to the home hub but it fails every time at 96% just saying test error.
    I’m currently using the bbc iplayer speed checker to see what I’m running at and have tried this using a wireless and wired connection and there’s very little difference between the two.
    I have a home hub 2 with firmware version 4.7.5.1.83.2.11.2.6 (Type B) Last updated 20/11/11
    I’ve reset the home hub to factory settings since the modem was replaced and this did fix another issue I was having where I could not connect new devices to the home hub without having to manually enter all the network details, but no joy with the connection speed.
    Does anyone know if there is an alternative speed check I can use to get all the necessary details that BT will want to see or will this be one for the mods to check?
    Thanks

    Hi and Welcome.
    It is the BT Speedtest results ( http://www.speedtester.bt.com/ ) that BT need.
    The IP settings you've been put on and the speeds your achieving are important parts of the FTTC Diagnostic test.
    (Might be interesting to try the Beta up to 24Mbps if you still can't get the main one to run... although it will not have the full info).
    So can only suggest you try turning off the Modem and Home Hub 2 for a minute or so, then when powered back up try and run the FTTC diagnostic part when WIRED.
    (Might be worth trying a different ethernet port on the HH2).
    And if you can another laptop to be really certain where the fault lies.
    If  the test fails again I would paste a copy of the failure in your thread as "AFTER REBOOT and ETHERNET PORT CHANGE" Test Results failure.
    Then complete the BT Forum Mods contact form http://bt.custhelp.com/app/contact_email/c/4951
    And add the URL of this form to the contact form, so BT can see the tests you've already tried and results.
    They will contact you, it may take 72hrs or so due their workload.
    Example of results the BT speedtest look like and improvement HERE.
    Btw it's not recommended to turn the Modem off too often as that may trick the Exchange equipment (DLM) into thinking you have a line fault, and it could reduce the IP settings slowing down your broadband in an attempt to provide a reliable broadband.
    An occasional turn off for testing or holidays will be ok though.
    I've also had my modem replaced by Kelly, but still have it mounted vertically to make sure it's cooling vents work most efficiently. Make sure yours is still running cool.
    My "New Style BT Speedtest results"
    Please Click On any Text in Blue as that automatically links to information.
    PC (NDEGR)

  • WSUS Server Reporting: Query TargetComputers for LastReportingStatus

    Hi,
    I'm having quite a difficult time in finding a way how to query multiple WSUS servers for the last report time of all TargetComputers.  I would like to query all targetcomputers on our Upstreamserver (master, the others are in replica mode) by FullDomainName.
    That way I could check every client for it's site, next connect to the connect to the correct wsus server and query for the lastreport time for that client.(we have a site code in the computer names, so starting with 0 = site A, starting with 2 = site B,..)
    In short, I want to query every targetcomputer there is to find for each WSUS server (3 servers) and if there is a lastreport time longer than 30 days, I want to query the other WSUS servers to check if maybe a last report date over their is more recent.
     Also, I should make my query so that when I loop through the array, I first do a check of the FullDomainName because based on it, I can connect to the correct "local wsus server" to do the check for last report time.
    I have this code already, can anyone please point me in the right direction for this?
    Any help is very much appreciated!
    $attachments = "xxxxxxxxxxxxx","xxxxxxxxxxxxx","xxxxxxxxxxxxxxxx"
    $time = (get-date).adddays(-30)
    $Computername = "SERVER_A"
    $UseSSL = $False
    $Port = 80
    [reflection.assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration") | out-null
    $Wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::GetUpdateServer($Computername,$UseSSL,$Port)
    $wsus.GetComputerTargets() | ?{$_.LastReportedStatusTime -lt $time -and $_.RequestedTargetGroupName -ne "Servers" -and $_.RequestedTargetGroupName -ne "Labo"} | Select FullDomainName, LastReportedStatusTime | export-csv "xxxxxxxxxxxxxx" -NoTypeInformation
    $Computername = "SERVER_B"
    [reflection.assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration") | out-null
    $Wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::GetUpdateServer($Computername,$UseSSL,$Port)
    $wsus.GetComputerTargets() | ?{$_.LastReportedStatusTime -lt $time -and $_.RequestedTargetGroupName -ne "Servers" -and $_.RequestedTargetGroupName -ne "Labo"} | Select FullDomainName, LastReportedStatusTime | export-csv "xxxxxxxxxxxxxxx" -NoTypeInformation
    $Computername = "SERVER_C"
    [reflection.assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration") | out-null
    $Wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::GetUpdateServer($Computername,$UseSSL,$Port)
    $wsus.GetComputerTargets() | ?{$_.LastReportedStatusTime -lt $time -and $_.RequestedTargetGroupName -ne "Servers" -and $_.RequestedTargetGroupName -ne "Labo"} | Select FullDomainName, LastReportedStatusTime | export-csv "xxxxxxxxxxx" -NoTypeInformation
    Send-MailMessage -Attachments $attachments -From zzzzz -To yyyyyyy -SmtpServer exchange -Priority High -Subject "WSUS Client Reportings"
    Grtz! Kristof

    This is closer to how to do it and is easier to manage.
    function Get-LateReporting{
    Param(
    [Parameter(
    Mandatory=$true,
    ValueFromPipeline=$true
    )]$server
    Begin{
    [void][reflection.assembly]::LoadWithPartialName('Microsoft.UpdateServices.Administration')
    Process{
    $wsus=[Microsoft.UpdateServices.Administration.AdminProxy]::GetUpdateServer($server,$false,80)
    $wsus.GetComputerTargets() |
    Where-Object{
    $_.LastReportedStatusTime -lt ([datetime]::Today.AddDays(-30))
    -and $_.RequestedTargetGroupName -ne "Servers"
    -and $_.RequestedTargetGroupName -ne "Labo"
    'servera','serverb','serverc'|
    Get-LateReporting |
    Select-Object FullDomainName, LastReportedStatusTime |
    Export-Csv latereports.csv -NoTypeInformation
    Send-MailMessage -Attachments latereports.csv -From zzzzz -To yyyyyyy -SmtpServer exchange -Priority High -Subject "WSUS Client Reportings"
    You can group the results to select the newest one.
    ¯\_(ツ)_/¯

  • FAO BT Moderator - Broadband speed checker concern...

    Hi,
    I understand that broadband speed checkers can give very inaccurate readings of what broadband speeds you can expect to recieve.  My actual download speed (after running say BT Speedtester or speedtest.net) is approx 4mb and has barely fluctuated in the 3 years that I have been on BT Total Broadband.  Whenever I run a BT or Sky broadband speed checker (therefore not an actual test, just a line check), my estimated connection speed is usually around the same mark, 4-4.5mb.
    HOWEVER!  Maybe once or twice a month when I run both the BT and Sky speed checkers, it will suddenly say that my estimated connection speed is only 0.5mb, even though when I run an actual test, I am still getting the 4mb approx that I have always got.  Then maybe a week will pass and it will be back up to the 4-4.5mb again!?!?!  I've ran the same speed checks using a friend's phone number (who is on the same ISP and Exchange) and his never changes?????
    I appreciate that these speed checks are unreliable and it's the actual test that is the most important thing however it concerns me when one minute these line checks state I can get estimated speeds of between 4-4.5mb then the next minute it's saying 0.5mb.
    I really would be grateful if a Mod would look into this issue for me.  In the meantime, does anybody else experience this problem or not why this may be?
    Any advice would be gratefully received!!
    You won't get to ride the racehorse...until you've ridden the mule.... - RogerB 13/04/2010

    It most certainly does and thank you for the speedy response as ever Roger.
    My current IP is 4000 however my exchange did have a network upgrade 8 days ago (hence the 8 day connection time).  I've ran a few BTSpeedtesters since then and the download achieved has been coming out at approx 4.2-4.3mb so I'm assuming or more hoping that the IP should be raised to 4500 the next time the HH re-syncs.
    Thanks again.
    UPDATE:
    Stats taken just now from BTSpeedtester.....
    FAQ
    Download Speed
    4336 Kbps
    0 Kbps
    7150 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 4336 Kbps
     For your connection, the acceptable range of speedsis 600-7150 Kbps.
     Additional Information:
     Your DSL Connection Rate :4928 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 4000 Kbps
    The throughput of Best Efforts (BE) classes achieved during the test is - 13.81:26.87:59.32 (SBE:NBEBE)
    These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
    The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
    You won't get to ride the racehorse...until you've ridden the mule.... - RogerB 13/04/2010

  • Moving soon, speed checker giving odd results

    We're currently buying a new house, and I was looking at transferring my Infinity to the new house - but the Speed Checker is showing Infinity as unavailable.  By mistake, I entered the house next to our target, which is on the same telegraph pole, and it comes up as available for that house.  The others on the same pole don't.
    Then I looked around the corner, and the adjacent roads have full speed infinity.  It seems odd that a single pole has different enabling status for some houses.
    Is there any way to find out why the provision is different?  If these are non-standard lines, direct to the exchange, then I would have thought that it would be a BT cost saving to revert them to "standard" provision - assuming of course, that the cabinet isn't full...
    Mike

    only the phone number check will be accurate as the address / post code checks are based on postcode centres which may be on different cabinets
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Error while running a query-Input for variable 'Posting Period is invalid

    Hi All,
    NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
    I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
    Diagnosis
    Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
    System Response
    Procedure
    Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
    Procedure for System Administration

    OK.
    Well, if the variable is not used in any interval selection, then I would say "something happened to it".
    I would make a copy of the query and run it to check if I get the same problem with period 12.
       -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
    If so, then try removing the variable completely from the query and hardcode restriction to 12.
       -> If problem still persists, I would have to do some thinking.
    If problem is gone, then add the variable again. Check.
       -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
    If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
    Good luck!
    Jacob
    P.S: what fisc year variant are you using?
    Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

  • How can I create subfolders in Mac Mail for an Exchange account?

    I use Mac Mail on OS X 10.8.4 to download my Exchange mail, which is hosted on Office 365.
    I can create folders inside existing subfolders in my Inbox, but if I try to create one as a first-level subfolder of the Inbox the option does not exist. Instead, it creates another top level folder and puts it at the bottom of the folder list, not inside the Inbox.
    Can anyone tell me how to add a normal subfolder to my Inbox?

    Exchange Basics
    The Inbox syncs more frequently than any other and should be kept as clean as possible. (this is the number one cause of problems with sync). Do NOT make subfolders under the Inbox.
    Exchange checks the server for updates every minute, any folder that has updates will subsequently be synced. Since Exhange has a limit on how many folders can be synced at a time, there can be a queue of folders waiting. The Inbox does get high priority so it will generally sync before other folders that also need to sync.
    Keep your folders under the 2GB limit. That's approx 6-10K messages per folder (does not include subfolders) Outlook does not export folders over 2GB as .mbox files
    Exchange  Header
    Inbox
      Folder A  <---this is wrong
    Drafts
    Deleted Items folder
    Junk
    Folder A  <-- this is correct
    It's best to move folders using your web interface (OWA) but you can drag in Outlook and/or Mail.
    In Browser via OWA
    Because of the massive changes the process is best done in your browser. I would also put Mail into work offline mode during this process. After all is moved on the server via the browser, I would delete the Exchange account and let it all download correctly from the server.

  • Unity: Voice-mail for non-Exchange subscribers

    Hi everyone!
    I have this issue: customer wants to enable voice-mail for non-Exchange users, I've created them as Internet subscribers for using with auto attendant, but I can't enable voice-mail for these extensions, basically the customer does not want for this users to receive the messages in their mail just only check it on IP phones. Is there a possible way???
    Thanks in advance for your help

    To add to Hailey's comment, here's the documentation that explains the behavior/limitations of Internet Subscribers in case you're interested in checking it out:
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/networking/guide/ex/5xcunet040e.html#wp1050583
    Hope that helps,
    Brad

  • SAP QUERY report for vendor line items

    Hi
    I have created a SAP QUERY report for vendor line items with fields vendor no.,vendor name,amount,company code and period.But there is one line item i donot know from wher system is getting it picked with is not in that vedor account,when i compare with fbl1n.I checked the document number too...the same doc number is twice in my query report.One with correct amount and another with wrong one.How do i chk.Where did i go wrong in creating query.I used logical database KDF.
    Please advise.

    i chked...how do we get the amount displayed in query...it just displays amount no debit credit symbol... i have selected BSEG-DMBTR field but no -/+ sign,how is it done in query,please suggest.

  • Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.

    Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.
    The above is what the bar says. It's been a while and wondered, maybe Apple changed the format for forums. Then got this nice big blank canvas to air my concerns. Went to school for Computer Science, BSEE, even worked at Analog Devices in Newton Massachusetts, where they make something for apple. 
    The bottom line is fast CPU = more FPU = more headroom and still can't figure out why the more cores= the slower it gets unless it's to get us in to a 6 core then come out with faster cores down the road or a newer Mac that uses the GPU. Also. Few. I'm the guy who said a few years ago Mac has an FCP that looks like iMovie on Steroids. Having said that I called the campus one day to ask them something and while I used to work for Apple, I think she thought I still did as she asked me, "HOW ARE THE 32 CORES/1DYE COMING ALONG? Not wanting to embarrass her I said fine, fine and then hung up.  Makes the most sense as I never quite got the 2,6,12 cores when for years everything from memory to CPU's have been, in sets of 2 to the 2nd power.  2,4,8,16,32,64,120,256,512, 1024, 2048,4196,8192, 72,768.  Wow. W-O-W and will be using whatever I get with Apollo Quad. 
    Peace to all and hope someone can point us in THE RIGHT DIRECTION.  THANK YOU

    Thanks for your reply via email/msg. He wrote:
    If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
    Xeon 4 core - E5.1620v2
    Xeon 6 core - E5.1650v2
    Xeon 8 core - E5.1680v2
    Xeon 12 core - E5.2697v2
    I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
    My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
    I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT?  I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
    SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro      was announced Last year, barely made the December mark, then pushed to January, then February and now April.
    Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
    PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

  • Best practice on mailbox database size & we need how many server for deployment exchange server 2013

    Dear all,
    We have  an server that runs Microsoft exchange server 2007 with the following specification:
    4 servers: Hub&CAS1 & Hub&CAS2 & Mailbox1 & Mailbox2 
    Operating System : Microsoft Windows Server 2003 R2 Enterprise x64
    6 mailbox databases
    1500 Mailboxes
    We need to upgrade our exchange server from 2007 to 2013 to fulfill the following requirment:
    I want to upgrade the exchange server 2007 to exchange server 2013 and implement the following details:
    1500 mailboxes
    10GB or 15GB mailbox quota for each user
    How many
    servers and databases  are
    required for this migration<ins cite="mailto:Mohammad%20Ashouri" datetime="2014-05-18T22:41"></ins>?
    Number of the servers:
    Number of the databases:
    Size of each database:
    Many thanks.

    You will also need to check server role requirement in exchange 2013. Please go through this link to calculate the server role requirement : http://blogs.technet.com/b/exchange/archive/2013/05/14/released-exchange-2013-server-role-requirements-calculator.aspx
    2TB is recommended maximum database size for Exchange 2013 databases.
    Here is the complete checklist to upgrade from exchange 2007 to 2013 : http://technet.microsoft.com/en-us/library/ff805032%28v=exchg.150%29.aspx
    Meanwhile, to reduce the risks and time consumed during the completion of migration process, you can have a look at this proficient application(http://www.exchangemigrationtool.com/) that would also be
    a good approach for 1500 users. It will help you to ensure the data security during the migration between exchange 2007 and 2013.

  • How to check with table for cursor..?

    How to check with table for cursor..?
    Here I have Table temp_final_plan
    Here i want to update if already exit...below is the procedure....
    CREATE OR REPLACE PROCEDURE spu_final_profit_plan
    AS
    -- Constant declarations
      ln_errnum number := 0;
    -- Variable declarations
       ls_errmsg app_errors.err_msg%TYPE;
       ls_appmsg app_errors.app_msg%TYPE;
       ls_appid  app_errors.app_id%TYPE;
    -- Cursor declaration for final_update_el
    CURSOR cur_final_update_el IS
        select '910' ent,
               '9127316' center,
               post_acct,
               sum(avg_mtd_01) sum_avg_mtd_01,
               sum(avg_mtd_02) sum_avg_mtd_02,
               sum(avg_ytd_01) sum_avg_ytd_01,
               sum(avg_ytd_02) sum_avg_ytd_02
          from mon_act_cypy
         where rec_type = 'A'
           and sum_flag = 'D'
           and yr = '2008'
           and substr(ctr_or_hier, 1, 2) = 'el'
           and ent || sub_ent in
               (select ent || sub_ent
                  from ent_ref
                 where roll_ent || roll_sub_ent = '999100')
         group by post_acct
        having sum(avg_mtd_01) <> 0
            or sum(avg_mtd_02) <> 0
            or sum(avg_ytd_01) <> 0
            or sum(avg_ytd_02) <> 0;
    -- Cursor declaration for final_update
    CURSOR cur_final_update IS
        select b.plan_ent b_plan_ent,
               b.plan_ctr b_plan_ctr,
               a.post_acct a_post_acct,
               sum(a.avg_mtd_01) sum_avg_mtd_01,
               sum(a.avg_mtd_02) sum_avg_mtd_02,
               sum(a.avg_ytd_01) sum_ytd_mtd_01,
               sum(a.avg_ytd_02) sum_ytd_mtd_02
          from mon_act_cypy a,
               plan_unit_tbl b
         where a.ent || a.ctr_or_hier = b.ent || b.ctr_or_hier
           and a.rec_type = 'A'
           and a.sum_flag = 'D'
           and a.yr = '2008'
           and b.hier_tbl_num = '001'
           and a.ent || a.sub_ent in
               (select ent || sub_ent
                  from ent_ref
                 where roll_ent || roll_sub_ent = '999100')
         group by b.plan_ent, b.plan_ctr, a.post_acct
        having sum(a.avg_mtd_01) <> 0
            or sum(a.avg_mtd_02) <> 0
            or sum(a.avg_ytd_01) <> 0
            or sum(a.avg_ytd_02) <> 0;
    -- Begin the procedure body
       BEGIN
    -- Insert / Update final profit plan for final_update query using cursor
       FOR rec_final_update_el IN cur_final_update_el
       LOOP
       EXIT WHEN rec_final_update_el%NOTFOUND;
       IF rec_final_update_el. THEN
          UPDATE temp_final_plan
             SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
                 sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,       
                 sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,       
                 sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,       
           WHERE ent = rec_final_update_el.ent
             AND center = rec_final_update_el.center
             AND post_acct = rec_final_update_el.post_acct;
       ELSE
          INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
                                             rec_final_update_el.center,
                                             rec_final_update_el.post_acct,
                                             rec_final_update_el.sum_avg_mtd_01,
                                             rec_final_update_el.sum_avg_mtd_02,
                                             rec_final_update_el.sum_avg_ytd_01,
                                             rec_final_update_el.sum_avg_ytd_02);
       END IF;
       END LOOP;
    -- Insert / Update final profit plan for final_update query using cursor
       FOR rec_final_update IN cur_final_update
       LOOP
       EXIT WHEN rec_final_update%NOTFOUND;
       IF rec_final_update. THEN
          UPDATE temp_final_plan
             SET sum_avg_mtd_01 = rec_final_update.sum_avg_mtd_01,
                 sum_avg_mtd_02 = rec_final_update.sum_avg_mtd_02,       
                 sum_avg_ytd_01 = rec_final_update.sum_avg_ytd_01,       
                 sum_avg_ytd_02 = rec_final_update.sum_avg_ytd_02,       
           WHERE ent = rec_final_update.b_plan_ent
             AND center = rec_final_update.b_plan_ctr
             AND post_acct = rec_final_update.a_post_acct;
       ELSE
          INSERT INTO temp_final_plan VALUES(rec_final_update.b_plan_ent,
                                             rec_final_update.b_plan_ctr,
                                             rec_final_update.a_post_acct,
                                             rec_final_update.sum_avg_mtd_01,
                                             rec_final_update.sum_avg_mtd_02,
                                             rec_final_update.sum_avg_ytd_01,
                                             rec_final_update.sum_avg_ytd_02);
       END IF;
       END LOOP;
    -- EXCEPTION handling section
       EXCEPTION
    -- Fire OTHERS Exception case by default
       WHEN OTHERS THEN
    -- ROLL BACK Transaction, if any failure
       ROLLBACK;
       ln_errnum := SQLCODE;
       ls_errmsg := SUBSTR(SQLERRM, 1, 100);
    -- Log the ERRORS into APP_ERRORS table using SPU_LOG_ERRORS procedure
       spu_log_errors(ln_errnum, ls_errmsg, ls_appid, ls_appmsg);
    -- End of the stored procedure
    END spu_final_profit_plan;
    [\pre]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    I'm not sure what you mean by, 'How to check with table for cursor..?' but I'll offer a comment on your Code Snippet. I think you want to know how to check if a record exists so you know if you need to perform an INSERT or an UPDATE.
    Here is a snippet of your code. I'll put my comments in "Comment" style in your code.
    -- Insert / Update final profit plan for final_update query using cursor
       FOR rec_final_update_el IN cur_final_update_el
       LOOP
    /* There is no need to test for %NOTFOUND since you are using Cursor FOR Loop! 
    ** This construct automatically exits when the last record is processed. */
       EXIT WHEN rec_final_update_el%NOTFOUND;
    /* Is this where you would like to know how to Check if the record already exist??
    ** I asked this because, 'rec_final_update_el.' is not valid syntax.  Are you looking for
    ** an Cursor Attribute or Method you can check here? 
    ** I would suggest a Primary Key or Unique Index on ENT, CENTER, and POST_ACCT
    ** on the TEMP_FINAL_PLAN table. Then simply perform an INSERT and code an
    ** Exception to UPDATE when you get a DUP_VAL_ON_INDEX exception.  Otherwise,
    ** you will need to simply run an Implicit or Explicit Cursor to test if the row exists and
    ** use this return value to determine if you should INSERT or UPDATE.  */
       IF rec_final_update_el. THEN
          UPDATE temp_final_plan
             SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
                 sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,       
                 sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,       
                 sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,       
           WHERE ent = rec_final_update_el.ent
             AND center = rec_final_update_el.center
             AND post_acct = rec_final_update_el.post_acct;
       ELSE
          INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
                                             rec_final_update_el.center,
                                             rec_final_update_el.post_acct,
                                             rec_final_update_el.sum_avg_mtd_01,
                                             rec_final_update_el.sum_avg_mtd_02,
                                             rec_final_update_el.sum_avg_ytd_01,
                                             rec_final_update_el.sum_avg_ytd_02);
       END IF;
       END LOOP;I hope I've answered your question, but if I haven't please provide more details so we can better understand your request.
    Craig...

  • How to  issue  currency notes  in  payment program for  Foreign Exchange

    HI
    I    have an issue  in   Foreign exchange  transaction  using  SPOT transaction.   Below is the  process flow
    1.   Record  the  spot transaction
    2.  Settle  transaction
    3. Tranfer  the  documents  to  FI  
    In   ( 3)   the   posting   create   posting in   the customer  for  whom  the  forex is to be issued.   
    My  QUESTION :
    I    have  to   pay  the customer   in   CURRENCY NOTES  and  NOT   by  CHECK    in  foreign currency.   The  automatic payment program  has  payment methods  viz  check, wire transfer.     How  do  I   issue   CURRENCY NOTES    or  TRAVELLERS CHECK .
    Thanks  for   a   immediate  reply.
    kamala

    Hi,
    I am not sure this is a right solution.  But I have some inputs on your requirements:
    1. For traveller cheques you may create a new payment method and do the required configuration for automatic payment program.  Don't generate any payment medium while running APP.
    2. For currency notes (cash payment) I am not sure how it works.  But probably it is possible by creating an account (account ID) for a particular house bank and use that (house bank & account id) for making payment. 
    Per my knowledge we have never used payment method cash (currency notes) in APP.  But logically it would work by create a new payment method and doing the required config for APP.
    Please update if you found a better way to do this.
    thanks & regards,
    Kumar

Maybe you are looking for