Split filename to file and extension
Hi experts,
Does any know a FM or class, which is released and I can use to get the file name and extension?
Normally I used the FM SPLIT_FILE.
But this FM does only exports CHAR3.
So I get a problem with new office-files (XLSX, DOCX)...
thx for any help
hi ,
Data : f1(20) type c ,
f2(5) type c,
c_tab type c value '.' .
data: f_name(30) type c value 'TEST.EXE' .
split F_NAME AT C_TAB INTO F1 F2 .
Regards
Deepak.
Similar Messages
-
How to split a single file and then route it to different systems
Hi All,
I have a requirement like...my incoming file(single file) needs to be split into 3 files based on a field "company code".and then route it into different systems.
my incoming file is like this .....
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
I need to split this file and my ouput file should be like this
For 1st system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
EOF.
For 2nd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
EOF.
For 3rd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
and then send it three systems based on company code.
Can anyone tell me how this can be achieved?
Thanks,
Hemanth.Hi Nallam,
I tried the same thing but in the input file as there are different company codes,It is not splitting the file into three parts and sending only concerned data to repective system instead the whole file is going to the all the systems.
I came to know that the file has to splitted in the mapping only, we are able to do it by using mapping but the problem is in Routing,as in receiver determination we makes use of source structure for giving the condition. Can you please help me on this.
Thanks,
Hemanth. -
Files and extensions thumbnails
Hello Experts,
I installed fresh copy of yosemite, and after the installation I have changed the default app for files but the thumbnail of the old app sticked on the files, so how i can make the new app appear on thumbnail?
I know the procedure of using ctrl + I on the files and change the icon, but i want to do it for all files of the same extensions at once.
Thx for your help.Patrick,
All I can recommend for CM purposes is what was done at a previous job of mine.
1. First you need to keep all of the installed Oracle products to include all patches you installed. Our CMs made an Oracle_817 staging area and had sub-directories for the install CD and all patches. An ls might look like this:
Disk_1
Patch_1234567
Patch_1327654NOTE: The patch numbers are made up and for an example only.
2. If you have a create_db script, you will need to place that in CM. I don't have access to a unix system right now, do a find for create and you should be able to locate the scritp
3. I would put tnsnames.ora into CM as well. It can be in two places /$ORACLE_HOME/network/admin or /etc
4. I would put listener.ora file into CM. It is usually found in /$ORACLE_HOME/network/admin
5. I would put the init<SIS>.ora file into CM. It should be in /$ORACLE_HOME/dbs
6. Finally, search /etc for all files owned by Oracle and place them into CM
These are all of the files I can think of. If anyone else knows of other files, please feel free to add them.
If you are placing these items into CM to help build another DB at a later time, the service name for the new DB should be changed. If you are doing this as a means of recovery, I can tell you from experience that this will take hours to days to recover the database. Get with the sysadmin and make sure you have a good backup and recovery plan and that it works. -
Split an XML File and invoke a Web Serivce for each splits using an XSLT
Hi,
We Have a requirement to Split an incoming XML File into chunks based on a child element and hit the target Web Service for each and every split ( i.e no of splits = no of hits on WebService).
Currently, the incoming XML file is getting splitted and gets appended to the SAME Payload and the WebService is hitted only once with the entire Payload.
Is it possible to invoke a WebService within a XSLT ?
Please find below the XSLT code used to split the file in chunks of 3
<xsl:param name="pItemsNumber" select="3"/>
<xsl:template match="@*|node()">
<xsl:choose>
<xsl:when test="count(Batch/Item) > 4">
<ItemMaintenance>
<xsl:for-each-group select="Batch/Item"
group-adjacent="(position()-1) idiv $pItemsNumber">
<xsl:result-document href="ItemsMatch\{current-grouping-key()}.xml">
<ItemMaintenance>
<xsl:copy-of select="current-group()"/>
</ItemMaintenance>
</xsl:result-document>
</xsl:for-each-group>
</ItemMaintenance>
</xsl:when>
<xsl:otherwise>
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:otherwise>
</xsl:choose>
</xsl:template>Hello,
It is possible to invoke a webservice from XSLT. To achieve this you must create a custom XSLT function that does the actual webservice call. You need to write an implementation in Java for this. See my blogpost http://blog.melvinvdkuijl.nl/2010/02/custom-xslt-functions-in-oracle-soa-suite-11g/ for a simple example.
Regards,
Melvin -
Batch renaming files and extensions?
Can someone tell me how I can do this? I have never used terminal or automator before, so I'm not sure how to go about it.
Thanks for any help.There are utilities out there that do batch renaming. Try searching VersionTracker.com and MacUpdate.com
Next is a question of what you want to rename, and what you want to rename it to. That affects the code.
If you are going the Unix shell scripting route, you have to be careful about spaces in names, as Unix commands are parse on white space boundaries, and so a file name with a space in it may look like 2 files, neither of which exsits. So quotes are needed to prevent that.
Automator and Applescript are uses to spaces in filenames, you just have to master their usage. There are actual forums for Applescript
<http://discussions.apple.com/forum.jspa?forumID=724>
and Automator
<http://discussions.apple.com/forum.jspa?forumID=1261>,
which might be more helpful. -
If I find the old bookmark file, I'm assuming I can restore it. I found an old bookmark file, but don't know where the current bookmarks are. Any idea?
That is a legitimate Mozilla newsletter. As it says in the email:
You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ " -
Get Info - file and extension greyed out
.dmg image which contains several folders and files. If I do a "Get Info" against any of the contents - they are all greyed out and not editable.
Also I can't add any more file to the .dmg
I know it's something simple or I've missed
TIAFound an answer in this post: <https://discussions.apple.com/message/1406506#1406506>
Herman1's answer (second reply to post) did the trick for me even though he is mentioning 10.4.x and I'm using 10.6.x. It still worked like a charm -
How to know the filename and extension of a file in PKCS7 envelope
Hi! I've a programm that makes a PKCS7 file. I'm enveloping just one file at a time. I want to know if there is a way to know the filename and extension of the file INSIDE de PKCS7 envelope. Because I receive a file that has .p7 extension, but the real document, the one to be decyprted, I don't know its name nor its extension, and I need both for writing it (I will not just invent some name).
Best regards!The construct of the PKCS7 structure you have, is defined in rfc2633. The part defining EncapsulatedContent is introduced in CMS [rfc2639], where no such attribute for a file name is saved in the structure.
In some occasions, when it is critical, organizations add own object identifier and attibutes to save such descrptivie information as filename and extension.
A practical approach is, on the signing side, sign the file A.ext to A-ext.p7m resp. A-ext.p7s
You can not assume a global approach to get back the original filename (if you have no agreement on not the signing peer as above) of the encapsulated data. The reason is, the encapsulated data field is general and it does not neccesarily mean it was a file (a part of a stream or any definite sequence of bytes in general). -
Split filename and create folders with Powershell script ( --newbie user)
I have a folder with 1000's of files. Each file varies in length; typically between 9-14 characters. Example:
C:\workpics\1238955678.1
C:\workpics\744556224.1
C:\workpics\744556224.2
C:\workpics\8445655996.1
I would like to run a script to split the filename and separate into folders. The filename would then consist of 5 characters, the foldername would be the first characters remaining.
C:\workpics\12389\55678.1
C:\workpics\7445\56224.1
C:\workpics\7445\56224.2
C:\workpics\84456\55996.1
Any assistance to create this Powershell script would be awesome. Thank you!!I have a folder with 1000's of files. Each file varies in length; typically between 9-14 characters. Example:
C:\workpics\1238955678.1
C:\workpics\744556224.1
C:\workpics\744556224.2
C:\workpics\8445655996.1
I would like to run a script to split the filename and separate into folders. The filename would then consist of 5 characters, the foldername would be the first characters remaining.
C:\workpics\12389\55678.1
C:\workpics\7445\56224.1
C:\workpics\7445\56224.2
C:\workpics\84456\55996.1
Any assistance to create this Powershell script would be awesome. Thank you!!
Please reread your request. It makes no sense. Read each statement carefully and notice that the statements are in conflict.
Start your scrip in PowerShell. Look up things like how to list files and how to manage strings. All of the information you need is here:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
¯\_(ツ)_/¯ -
Getting Output filename and extension same as the incoming filename and extension
I need to create a SFTP send port where I should get the output file name and extension same as that of the incoming filename
I had set the filename in the send port as "%SourceFileName%" but this did not work.
I have also assigned the input filename (without extension) in a variable in orchestartion. Is there any way i could get the output filename and extension same as that of the incoming message?
Any help would be much appreciatedHi,
The %SourceFileName% macro maps to the context property BTS.ReceiveFileName that travels with your message in the context. So in order for this macro to work in a send port the message that is going out needs to have this BTS.ReceiveFileName property on
the context. You probably creating a new message in your orchestration and sending that out. The new message does not have the property on its context which makes it fail. Use a message assignment shape in your orchestration to set the context property for
the message going out:
MyMessage(BTS.ReceiveFileName) = OrigMessage(BTS.ReceiveFileName);
Then %SourceFileName% macro will work at send port.
Rachit
Please mark as answer or vote as helpful if my reply does -
In Windows, when Firefox (I'm currently using 7.0) downloads a file, it appends ''.PART'' to the file name of the currently downloading file and just renames it to its original file name after it finishes downloading.
I sometimes like to watch a currently downloading video file, so it will be better if Firefox just downloads the file to its actual filename (like what Opera does), so I can easily double click the incompletely downloaded file and watch it with the video player assigned to that file extension, rather than the awkward ''Right click -> Open With -> Choose Default Program'' route with .part files.
Does anyone know how to set Firefox to do this?It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox and prevents Firefox from renaming the .part file.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files -
Get File by modified date and extension then copy to location
Hello,
Ill give a brief description of what I am trying to accomplish. We have a bunch of files that are sitting on a deduplication box (Exagrid), we want to try and copy certain files off of this dedup box, however, if we copy EVERYTHING this will fill up our
entire NAS Device. So, instead, I need to build a script that finds files by a modified date and extension type, then copy those to a specified folder.
Here is the code:
$logfile = "C:\CopyResults.log"
function LogWrite{
Param([string]$logstring)
Add-Content $logfile -Value $logstring
$date = get-date
$DateToCompare = (Get-Date).AddDays(-2)
$Files = Get-ChildItem -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".xlsx"}
foreach($File in $Files){
Write-Host "$File was copied to C:\test"
Copy-Item $File C:\test
logWrite "$File was copied to c:\test --- $date"
The file extension is of course just a test, as well as the destination of where these files are to be copied to. Ultimately I would like to build in the functionality that will check the date and delete the files after a certain amount of time has passed and
then copy new files. For now, though, I would be satisfied with just some insight on my own idea and know where I am going wrong or how to clean this up a little better. The overall issue I having is when I run this portion of the script I get this: Copy-Item
: Cannot find path 'C:\Users\<username>\<filename>.xlsx' because it does not exist.
At line:13 char:5
+ Copy-Item $File C:\test
+ ~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (C:\Users\<usern...al filename>.xlsx:String) [Copy-Item], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.CopyItemCommandI solved the issue. Here is the full script:
net use \\netpath\filename /user:<Username> <Password>
$logfile = "C:\CopyResults.log"
function LogWrite{
Param([string]$logstring)
Add-Content $logfile -Value $logstring
$date = get-date
$DateToCompare = (Get-Date).AddDays(-1)
$VBMs = Get-ChildItem \\netpath\filename -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".vbm"}
$VBKs = Get-ChildItem \\netpath\filename -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".vbk"}
$VIBs = Get-ChildItem \\netpath\filename -Recurse | Where-Object {$_.LastWriteTime -gt $DateToCompare} | Where-Object {$_.Extension -eq ".vib"}
foreach($VBM in $VBMs){
Write-Host "$VBM was copied to C:\test"
Copy-Item $VBM.FullName \\netpath\filename
logWrite "$VBM was copied to c:\test --- $date"
foreach($VBK in $VBKs){
Write-Host "$VBK was copied to C:\test"
Copy-Item $VBK.FullName \\netpath\filename
logWrite "$VBK was copied to c:\test --- $date"
foreach($VIB in $VIBs){
Write-Host "$VIB was copied to C:\test"
Copy-Item $VIB.FullName \\netpath\filename
logWrite "$VIB was copied to c:\test --- $date"
"In this case you are handing a System.IO.FileSystemInfo.FileInfo object to the Copy-Item cmdlet. I think the cmdlet is probably defaulting to using the .Name property and that is not enough information for the copy to work. When you explicitly give the
.FullName property to the cmdlet, it now has the information that it needs."
I found this on Stack Overflow buried in the forums and it resolved all my issues. I have tried using that tool and it works very well, however, Powershell is what I am using for everything and I would like to keep it that way.
Thank you all for your time and help. -
Highlight filename AND extension
Within the Finder when I select a file and press ENTER or RETURN only the filename is highlighted NOT the filename extension. (I have SHOW filename extensions set to ON.) It used to work in Tiger.
Is there a way to change this?Wow, funny to find someone with the same annoyance who posted on the same day!
I have the same complaint after upgrading from 10.4.
What he's talking about is really annoying. If I set my OS to 'SHOW ALL FILE EXTENSIONS' then why don't you just highlight the **** extension too? If you're so scared of file extensions, then leave them turned off...
I work as a web developer, and often times will need to link to a file, like a PDF. Sometimes these have very long or hard to type names, so I prefer to copy/paste and make sure I get it right.
In 10.4 it was simple, press enter, copy, alt+tab, paste, and I was GUARNTEED to have the filename typed correctly.
Now, in 10.6, I have to re-train myself to double click or select all or make sure to get the extension in there, and it's really easy to forget.
Would be awesome if there was a way to fix it, I'm annoyed by it as well & was searching for a solution when I found this thread.
I think what os/x needs is two modes; an "I'm a normal user" mode, and an "I'm a expert user" mode to deal w/ crap issues like this one. -
I have had nothing but grief since I upgraded to 4. It is hateful. I can't print anything. If I highlight something from a website or my email and tell the printer to just print the selection, it doesn't print. It wants me to save the the file and they all have a .tif extension and nothing will print. I have uninstalled 4 and gone back to 3.6 and the problem is still there. If I highlight the desired selection and copy it to Word 2003, it will print what I want, but I can't print anything from the browser itself. That is the only problem I'm aware of so far. I upgraded about a week ago at most, maybe less than that. I'm so sorry I did. Why can't I print anything? I don't want my selection to be a file, I just want it to print!
Thank you, but it didn't work. My printer stays on away, independently of the PC. I can print from Chrome and IE7 with no problem but not Firefox. The .tif extension refers to a tagged image something. I went looking around in the control panel and I found that Microsoft Office has it's own Access Snapshot Viewer. My company installed Office 2003 on my PC but I only use Word in my work. This snapshot viewer was listed in the control panel under Printers and Faxes. It was not the default anything but for some reason, Firefox 4 installation must have kicked it into gear. I've had the Office software for several months with not one problem. I have Firefox4 for less than a week and everything becomes difficult. I deleted the Office snapshot viewer (hope I don't get fired for it) so my little HP printer is the only one listed and now things seem to be working okay. I have FF 3.6 back up and running. I didn't lose any data and I hope the support and security updates stay available for a long time because it seems like there are plenty of people who aren't in love with FF4. Thank you so much anyway for your help.
-
Extension for creating a zip file and unzipping it
Iam totally new to Dreamweaver and the extensions. So please
help me with this.
Assuming i have a .zip file and it contains some html pages
along with css and gifs.
The req is to have an Import option, which given this zip
file, can unzip its contents. The user can work on these html
pages. When the user finishes working on them, I need an export
button so that we can package the entire stuff back into a zip
file.
How can i implement this ?
Is there any extension that is available for this ?
Eagerly looking forward to some useful answers...
Thanks in advance,
GaneshThere used to be one .. I'm not sure if that was in DMX time
or DMX 2004
time .. that, when installed, allowed you to select files
from the site
folder or the whole thing and create a zip from them. I don't
remember what
it was called or who created it .. but it might be on one of
my archived
disks or zips .. I'll try to check it out later today.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Ganesh Ram" <[email protected]> wrote in
message
news:engarc$d62$[email protected]..
> Iam totally new to Dreamweaver and the extensions. So
please help me with
> this.
>
> Assuming i have a .zip file and it contains some html
pages along with css
> and
> gifs.
> The req is to have an Import option, which given this
zip file, can unzip
> its
> contents. The user can work on these html pages. When
the user finishes
> working on them, I need an export button so that we can
package the entire
> stuff back into a zip file.
>
> How can i implement this ?
> Is there any extension that is available for this ?
>
> Eagerly looking forward to some useful answers...
>
> Thanks in advance,
> Ganesh
>
>
Maybe you are looking for
-
Icloud sync only works between mac pro and windows outlook, not with iphone and ipad anymore
Hi Can anyone help me with my problem? I do have icloud installed on my MacBookPro, on my Windows Outlook computer, on my iPad 2 and on the iPhone 4S. Now until yesterday everything synchronized perfectly well. Then I created some groups on my MacBoo
-
TS4526 I just updated my Apple tv to 5.2.1 and now I can't access Itunes store
When I try to access the store nothing happens, the screen stays on the account information page. Im using IMAC with Mountain Lion 10.8.3 and the latest Itunes update. Everything else seems to work fine.
-
Cannot open a new tab have to get a link and open in new tab.
I cannot open a new tab either by clicking on the button on the tool bar, going to File/Open New Tab or CTRL T. I think this happened after I upgraded to the newest version of Firefox. The only way I can get a new tab is to click on a bookmark or lin
-
Hi All I am trying to deploy an ear which contains a session bean .I have added some jars to the ear which are required for the hibernate. At the time of the deploying i am getting the follwing error Please giude me to solve this problem Thanks and
-
Running Scheduled Crystal Reports for Multiple Customers!
Hi, We are trying to accomplish what we felt was a very common practice with reports. We have CR 2011, CR 2011 Enterprise, CR Server 2011. What we are trying to accomplish is very simple. Currently, I have a prompt in my report that prompts me with a