Split message - InterfaceDetermination did not yield any actual interface

Hello experts,
We have the following scenario.  PI 7.3 Single stack.  text file input to multiple receivers.
The scenario works in Dev, but after transporting to QA test, it fails.  I have transported ESR objects twice and have deleted and recreated the Integrated Configuration. Cache seemed to be up to date, and we had Basis restart the PI system.
The error messages states: "InterfaceDetermination did not yield any actual interface."  However, the message is not splitting, so the failure is truly before that step.
Message log from successful message in Dev:
7/15/2014 2:23:30.691 PM
Information
Send text file "/sapdataexch/dev/interfaces/micros_xstore/I_AUD_0103_XStoreIBSales/IN/20140715-050034-688_SettlementLog.08104.01.20140715.084728.xml", size 14886, encoding UTF-8 with QoS EO
7/15/2014 2:23:30.691 PM
Information
MP: processing local module localejbs/CallSapAdapter
7/15/2014 2:23:30.692 PM
Information
Trying to put the message into the send queue
7/15/2014 2:23:30.692 PM
Information
Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System
7/15/2014 2:23:30.697 PM
Information
Message successfully put into the queue
7/15/2014 2:23:30.697 PM
Information
The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application
7/15/2014 2:23:30.699 PM
Information
The message was successfully retrieved from the send queue
7/15/2014 2:23:30.703 PM
Information
Starting to Split Message
7/15/2014 2:23:30.703 PM
Information
Message status set to DLNG
7/15/2014 2:23:30.704 PM
Information
Message Split to Message 1f6a76a9-0c4d-11e4-b4fa-0000010522fb(OUTBOUND)
7/15/2014 2:23:30.705 PM
Information
Finished Splitting Message
7/15/2014 2:23:30.713 PM
Information
Message Split to Message 1f6a76a9-0c4d-11e4-b4fa-0000010522fb(OUTBOUND)
7/15/2014 2:23:30.721 PM
Information
Message Split to Message 1f6a76aa-0c4d-11e4-c008-0000010522fb(OUTBOUND)
7/15/2014 2:23:30.722 PM
Information
Message status set to DLVD
7/15/2014 2:23:30.725 PM
Information
Message was successfully transmitted to endpoint   using connection File_http://sap.com/xi/XI/System
7/15/2014 2:23:30.752 PM
Information
File "/sapdataexch/dev/interfaces/micros_xstore/I_AUD_0103_XStoreIBSales/IN/20140715-050034-688_SettlementLog.08104.01.20140715.084728.xml" archived after processing
Message log from failed message in QA:
7/16/2014 3:45:10.944 AM
Information
Send text file "/sapdataexch/qas/interfaces/micros_xstore/I_AUD_0103_XStoreIBSales/IN/SettlementLog.01769.05.20140716.073904.xml", size 232961, encoding UTF-8 with QoS EO
7/16/2014 3:45:10.945 AM
Information
MP: processing local module localejbs/CallSapAdapter
7/16/2014 3:45:10.946 AM
Information
Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System
7/16/2014 3:45:10.947 AM
Information
Trying to put the message into the send queue
7/16/2014 3:45:10.962 AM
Information
Message successfully put into the queue
7/16/2014 3:45:10.962 AM
Information
The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application
7/16/2014 3:45:11.291 AM
Information
File "/sapdataexch/qas/interfaces/micros_xstore/I_AUD_0103_XStoreIBSales/IN/SettlementLog.01769.05.20140716.073904.xml" archived after processing
7/16/2014 3:45:11.431 AM
Information
The message was successfully retrieved from the send queue
7/16/2014 3:45:11.579 AM
Information
Starting to Split Message
7/16/2014 3:45:11.579 AM
Information
Message status set to DLNG
7/16/2014 3:45:11.582 AM
Error
Transmitting the message to endpoint   using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
7/16/2014 3:45:11.711 AM
Information
Message status set to WAIT
There are no conditions on the Receivers.  The file should always split to both,
Inbound processing is a file adapter.
Any help is appreciated.
Thanks!
Tom

Hi Harish,
That was exactly the issue.   The SWC was not the same.  I made the QA to match the Dev and the process worked.
Very good.
Thanks!
Tom

Similar Messages

  • Dummy scen. error InterfaceDetermination did not yield any actual interface

    Hi,
    I've created a dummy scenario to move any files. (PI 7.3)
    I've created a dummy data type, message type, and 2 service interface (outbound and inbound) without any mapping.
    Then I designed the scenario in the integration directory: 2 business components, sender and receiver file adapters, and integrated configuration.
    I just want to read the file from source folder and write to the target folder. No mappings, no validations... But if the source file isn't an XML created from the source message type, I get the following error, I don't know why:
    Error: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
    I know my source file isn't right, but I don't have any mapping or XML validation, so, why I get this error?
    And I have another question. When I get this error, the message payload isn't persisted to PI so it disappears and I cannot check the message content. Is there anyway to enable PI to store the message payload when this error happens?

    Hi Marshal,
    Follow the steps:
    - No need to create any objects in ESR
    - In scenario, whenever you need to put Inbound and Outbound Interface name, Type any name of interface which does not exist in ESR. Example: SIOA_LargeFile and SIIA_Large File with some Dummy Namespace as "http://dummy/LargeFile".
    Hope steps are clear.
    The whole idea behind giving Dummy names is: when we try to split our file into chunks and if we mention some defined structure with help of data type and message type, the output file is not created completely at once. It is created in chunks. A single chunk output file, will not have complete XML structure and hence will result into XML Parsing Error.
    Please revert if any issues.
    - Pooja

  • InterfaceDetermination did not yield any actual interface

    Hi,
    My scenario is SOAP to IDOC in 7.4.The message is failing in message monitoring  with the below error :
    Transmitting the message to endpoint {2} using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
    Status Detail : Interface Determination Error - General or fallback interface determination error
    I tried testing the payload in MM and OM and it  is working fine.
    I went through the thread  Error:MP: exception caught with cause com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
    but it is not helpful.
    Please provide your suggestions to resolve the issue.
    Thank you.

    Check for Nicolas Freyre reply in the below thread. It should address your issue.
    Error: InterfaceDetermination did not yield any actual interface in Advanced Adapter Engine

  • InterfaceDetermination did not yield any actual interface - Error

    Hello All,
    We are working on a synchronous interface integrating with the third party.
    On executing the inbound interface (Third Party to SAP ECC), third party system receives the error as stated below
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
    On checking PI logs there is no logging in both message monitor and communication channels.
    Any suggestions/ideas on debugging this error would be helpful.
    Thanks,
    Nilambari

    1.
    Please reassure that you are looking at the correct PI system. As the sender gets some error messages that come from com.sap... namespace there ought to be some traces on the PI system, either in communication channel monitoring, message monitoring or nwa/logs
    2.
    As you are proably providing a webservice to the third party just use the WSDL you provided and use that within soapUI. See for a tutorial here http://www.techrepublic.com/blog/software-engineer/how-to-test-web-services-with-soapui/ (be aware, you might need to import your PIs certificates to cacerts of soapUI if you use https and your PI presents a certificate that is not signed with a trusted CA)
    3.
    If you are sure about the interface / channel you are calling, use XPI inspector (http://service.sap.com/sap/support/notes/1514898) to track down the error. Use Template "50" and specify your receiver channel
    If that doesn't help, please come back with a more detailed description of your scenario.
    HTH
    Cheers
    Jens

  • Error on sender FCC: InterfaceDetermination did not yield any actual intfc

    Hi Experts,
    I am developing a File to Proxy scenario. Sender File adapter with FCC has been configured as required with the Fixedfiled lenghths and filed names. On trying to execute the i/f by placing the source file at the desired location; Sender Communication channel throws the following exception: Error: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface. I am using the iNtegrated configuration object on PI 7.3 and Ic has been configured correctly too.
    the adapter logs look as follows:
    18.10.2011 08:20:46 Information Channel CC_BOURQUE_AccrualTransactions_FILE_Sender1: Converted complete file content to XML format
    18.10.2011 08:20:46 Information Channel CC_BOURQUE_AccrualTransactions_FILE_Sender1: Send binary file  "D:\Interfaces\ITF\07\Out\freight_export.dat", size 46538 with QoS EO
    18.10.2011 08:20:46 Information MP: processing local module localejbs/CallSapAdapter
    18.10.2011 08:20:46 Information Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System
    18.10.2011 08:20:46 Error Returning to application. Exception: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
    18.10.2011 08:20:46 Error MP: exception caught with cause com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
    18.10.2011 08:20:46 Error Attempt to process file failed with com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
    Please guide me if I am missing on anything.
    Regards,
    Elizabeth

    Hi Mark,
    Have removed the namespace from the message type. Still the same issue occurs for mapping.
    On trying to copy and use the source payload on the Message mapping test tab, the source structure is reflected with all the elements and nodes in red.
    Following is how my source payload looks like:
    <?xml version="1.0" encoding="UTF-8"?>
    <MT_AccrualsTransactions>
    <Accruals>
         <Row>
              <BillOfLadingNumber>21776</BillOfLadingNumber>
              <CarrierCode>VB</CarrierCode>
              <ChargeTypeInterface>FO</ChargeTypeInterface>
              <CreateDate>07-01-201107:45:22:303</CreateDate>
              <Amount>28830.51</Amount>
              <Currency>U</Currency>
              <ExportDate>07-01-201107:45:24:070</ExportDate>
              <VendorCode>105106</VendorCode>
              <CustomData1>5140200-1000000</CustomData1>
              <CustomData2>6635</CustomData2>
              <CustomData3>88846</CustomData3>
              <CustomData4>5                   2011/</CustomData4>
              <CustomData5>01/31</CustomData5>
              <CustomData6>034</CustomData6>
              <CustomData7></CustomData7>
              <CustomData8></CustomData8>
              <CustomData9></CustomData9>
              <CustomData10></CustomData10>
              <ReferenceNo></ReferenceNo>
              <EquipmentInitials></EquipmentInitials>
              <EquipmentNumber>B         MTC723</EquipmentNumber>
              <ShipDateTime>01</ShipDateTime>
              <OrderNumber>-29-201107:00:00:000U88714</OrderNumber>
              <ShippedQty></ShippedQty>
              <ShippedUOM></ShippedUOM>
                      <OrganizationCode/>
                       <AccrualDate/>
                       <EOF/>
         </Row>
    </Accruals>
    </MT_AccrualsTransactions>
    What could be wrong?
    Regards,
    Elizabeth

  • Interface determination did not yield any actual interface

    Hello,
    I'm doing a file to proxy scenario where I sent a csv file to proxy. I'm using POD SAP 7.4 and I have done all the configurations properly. I'm getting this error - "interface determination did not yield any actual interface". Please help.
    Thanks

    Hi Sathish,
    are you doing any multi mapping?
    check this http://scn.sap.com/thread/3493280
    Regards,
    Muni

  • Wndows did not detect any biometric devices on this computer..

    I have an HP ProBook 4540s running Windows 7 Professional w/IE11. I had to do a clean install of Windows 7 Pro and since then I cannot get my fingerprint reader to work at all. In my Control panel, under Biometric Devices, I recieve the message "Windows did not detect any biometrics devices on this computer". However, under Computer , Properties, Device Manager, Biometric Devices,  the is Validity Sensors (WBF) (PID=003d).
    I have tried to update, uninstall, re-install HP Simplepass, drivers, etc from the HP website, but nothing is working. Also I cannot find exactly what fingerpriint reader hardware is installed on the computer even though it is physically there as part of the original configuration.
    I appreciate any assistance in resolving this issue.
    Mark

    Hello Mark531,
    Welcome at the HP forums, 
    Are you searching for the following driver?
    http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64338.exe
    Winos.
    The doors of wisdom are never shut. Benjamin Franklin
    We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela

  • Windows did not detect any networking hardware, Windows 7, New Hard Drive

    Message "Windows did not detect any networking hardware"
    Satellite P505 S8980 Windows 7 Home Premium.
    I replaced the Toshiba 500 GB HD with 500 GB Seagate.
    Device Manager icon for any device with yellow exclamation mark,
    Click on "Update Driver".  Lan eNet details as follows:
    Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
    Browse to the folder where the setup program has the driver...
    Message: "The best driver software is already installed."
    (But the yellow exclamation mark still harasses me.)
    --- Go to "Setup new connection" ---
    "Choose a connection option"
    Click on "Connect to the Internet"
    Response: "Windows did not detect networking hardware"
    As near as I can tell, that translates from error 0x8E5E0247
    I have this same error on other yellow exclamation marks respective of what kind of device it is.
    => To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
    Note:
    Same issue (hardware not detected) for Video adapter and Audio.
    I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware.  I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed.  I have uninstalled and reinstalled with same results.
    Solved!
    Go to Solution.

    I'm discovering I am not as well as I thought... running on the  AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
    Review for context: Advanced Function HDD
    Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
    Toshiba supplied Windows-7 System Restore Discs: to factory state
    Then I built the Windows-7 Repair  Disc... used later.
    Hard drive was replaced when it caused SMART warning at every system boot.
    Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
    I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
    That new drive would not boot: "Required source not found"
    Booted My newly created Windows-7 repair disc, and used to to fix startup.
    See images.
    That worked and then the ST9500423AS disc booted.
    Now... next day I discovered Window Update is not working.
    I get message:
    Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
    I ran Microsoft Fixit for updates.  It says it fixed two items.
    I still have the problem.
    The service shows "started"
    Control Panel/ ACTION Center/ Maintenance/ Check for Updates
     "No action needed"
     "Windows Update does not require any action"
    I checked  Update History...
    ... It is empty, else window is vacant... blank.
    Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
    It works!  7 updates to install, including SP1... but I did NOT install them.
    Switch back to the AF drive... Update doesn't work. I am broke again.
    Is this another strange problem caused by the Advance Format issue?
    What to do?
    By the way... I did install an Intel storage Matrix driver  update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
    Carl

  • My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

    My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Running os 10.9.2 and showing that I have a flagged message,which I can't find. Also, now have a 'flagged' message mailbox that I did not add. any ideas how to clear an apparently nonexistent flag?

    running os 10.9.2 and ever since I loaded it, I am showing that I have a flagged message,which I can't find. Also, now have a 'flagged' message mailbox that I did not add. any ideas how to clear an apparently nonexistent flagge message in Maverick?  I've tried all the basics and nothing seems to show

    Have you tried resetting the SMC ?     >  Resetting the System Management Controller (SMC)

  • BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

  • Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

    Hello,
    I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
    Iam reading a flat file and trying to write into an XML in the same FTP server
    I have a 1 to 1 Mapping as follows
    And my Content Conversion at Sender side Looks like this
    After running the configuration Iam getting following error message
    Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
    My System is the SAP Netweaver Process Intgration 7.4 single Java stack
    Do you have any idea how to fix this issue?
    Many thanks in advance
    Khadim

    Hi evrybody
    I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
    <ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
    <Recordset>      
    <header> 
         <gesellschaft>03</gesellschaft> 
         <filiale>000</filiale>
         <satzart>11</satzart>
         <datum>00000000</datum>
         <kennzeichen>1</kennzeichen>
    </header>
    </Recordset>
    </ns:hartgeldbest_ERP_KT>
    The issue is on detrmining the RECEIVER in the Main-XML
    <sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
    <sap:MessageClass>ApplicationMessage</sap:MessageClass> 
    <sap:ProcessingMode>asynchronous</sap:ProcessingMode>
    <sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
    <sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
    <sap:Sender> 
    <sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/> 
    <sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
    </sap:Sender>
    <sap:Receiver> 
    <sap:Party agency="" scheme=""/> 
    <sap:Service/>
    </sap:Receiver>
    <sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
    </sap:Main>
    Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
    Any idea?
    Thx
    Khadim

  • I have paid my subscription for Adobe Acrobat Pro but can not install it- I always get an error message -also I did not receive any instalation code...

    I have paid my subscription for Adobe Acrobat Pro but can not install it… I always get an error message …also I did not receive any instalation code...

    With the subscription you sign in with your Adobe ID that you used to order the subscription. By installation code, I assume you mean serial number. You do not get one with the subscription, but use your Adobe ID.

  • HT5312 algokar Dec 26, 2013 2:11 AM Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety   I can not buy any program that I forgot to ask him answer safety   Please help and send me a re-liquefaction a

    Forgot Answer Questions safety tried to re-send a lot of email did not reach any messages to re-ask safety
    I can not buy any program that I forgot to ask him answer safety
    Please help and send me a re-liquefaction answer to the same email

    1)  Apple ID: All about Apple ID security questions
    If necessary
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    3)  Or Email Here  >  Apple  Support  iTunes Store  Contact

  • Error message - did not match any documents

    I am undertaking an IM training program that recommends the use of firefox as the browser. However when I try to login my site using Firefox I receive the following message
    Your search - http://acnehometreatmentsandcures.com/wp-login - did not match any documents.
    I am able to login using Google so is there a problem with my Firefox installation. Your assistance is appreciated

    When I go to the site's home page and use the login link, there is a .php extension on the page:
    http://acnehometreatmentsandcures.com/wp-login.php
    Does that work for you?

Maybe you are looking for

  • Invoking a page url from page1 in book1 to page2 in book2

    Hi, My need is to invoke a portal page url form a portal page. This works fine when the first page and the second one are part of the same book. But when the first page is in a first book and the second one in another book, the portal framework is en

  • How to change number of retries and delay before retrying after software install failure

    I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure? I find "Retry Settings" in "Software Distribution Component Properties".

  • How to design this requirement  by GP, webdynpro, Adobe and UWL?

    The scenario is : The supplier logs in the SAP Portal 1) The first screen should be WebDynpro  screen with some filter selection which have drop downs etc populating from R/3 After selecting particular values and clicking on a button on screen an ado

  • SPM related queries

    HI, I have few queries with regard to SPM, please share if you have any info:- 1. If we are using flatfile mechanism(data extraction) to load data in SPM, is there any program to FTP the file from ECC to SPM(BI). We have extracted the data in ECC sid

  • Static crackling noise, Right speaker when audio is being played

    I recently purchased this Satellite C50D-A Windows 8 Laptop. I have had it for less than 3 months. Recently the right speaker has started acting up with some sort of high pitched static crackling noise whenever audio is played regardless of it being