Split records in message
Hello! I have some message type:
<mt>
<record>
</record>
</mt>
where occurence of "record" is 1000, for example. And I need to split it to the same message type but with "record" occurence 10.
So, if I have one big XML-file with 1000 records, I need to have 100 files (10 records per file).
Could you help me please?
Hi, Andrey,
What kind of sender channel have you?
If your sender channel is a file content conversion, try with Recordsets per Message parameter.
If your sensder channel is a JDBC , you must split your message in a store procedure..
Regards,
Carme
Similar Messages
-
Filtering of records in Message Mapping
I am facing problem during filtering record in message mapping. My message comes from R3 and should be sent to one business service in entirety and should also be sent to another business service in part. To resolve this I created a message map for selecting record based on some conditions but this creates empty XML nodes wherever condition is not satisfied. Everything works fine but the scenario fails at the end while trying to convert XML to text using file adapter. The error is Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)
Hi Rajesh,
This scenario you are trying can be done using CONDITIONAL RECEIVER DETERMINATION and RB SPLIT, where you can basically have one sender and two receivers.
To do this without using a BPM.
1. Create your mapping program that will map the information from the source file
into the destination idoc. This has to be a 1:N split. Just make sure that the destination message type and message interface are are of occurrence N.
2. Also, you will have 2 destination interfaces and 2 interface mapping, one for the IDOC and one for the mail.
Now, there are a few essential steps in your configuration,
1. In the receiver determination, specify the 2 receiver systems, one for your IDOC and the other for your MAIL.
2. Now, you will have a condition window. Just type the condition on the basis of which the receiver has to be determined for the mail and the idoc business system. Just remember that the condition can be specified only for the source message.
3. In the Interface Determination, you have an option called RB CLASSIC and RB SPLIT. To do a 1:N split, you will have to do a RB_SPLIT.
And since you wanted to covert the XML format to text format you require content conversion at the receiver adapter end, for that please go through these links below. It clearly explains your requirement.
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
I hope I have answered your query.
Regards,
Abhy
note: do reward points for the helpful answers. -
Sender File Adapter cannot send single record per message ?
Hi,
I have scenario flat file to jdbc. but then why the sender file adapter didn't split the record to become single record per message eventhough i have set it in "Recordsets Per Message" = 1. ?
Document Name MT_APINVOICE
Document Namespace urn:file:jdbc:apivinvoice
Document Offset 8
Recordset Name INPUT
Recordset Namespace
Recordset Structure RECORD,*
Recordset Sequence Ascending
Recordset per Message 1
Key Field Name
Key field Type String
RECORD.fieldFixedLengths 10,5,10,10
RECORD.endSeparator 'nl'
RECORD.fieldNames F1,F2,F3,F4
Please advise
Thank You and Best Regards
Fernand>>but then how to make for example more then 1 records per message.
like 10 records per message. should i set RECORD,10 ?
That is right. Just try it out yourself.
@Shesagiri,
Number of record is decided by the parameter Recordset structure and number of recordset with in a message is decided by Recordset per Message.
Regards
Jaishankar -
Split Bulk Xml message in to many
Hi,
How to split large xml message in to many xml messages in biztalk 2006. For example if that xml message contain more then 10,000 records then I have split into each 10,000 records. Can anyone help me?
Thanks,Hi,
There are four methods to get your message debatched:
Receive Port Pipeline Debatching
Orchestration debatching by calling a pipeline.
Orchestration XPath Debatching
Orchestration Atomic Scope Node List Debatching
1)
Receive Port Pipeline Debatching
http://social.technet.microsoft.com/wiki/contents/articles/26005.biztalk-server-debatch-xml-with-envelope.aspx
2)
Orchestration debatching by calling a pipeline.
http://jeremyronk.wordpress.com/2011/10/03/how-to-debatch-into-an-orchestration-with-a-pipeline/
3)
Orchestration XPath Debatching
http://www.digitaldeposit.net/blog/2006/12/message-debatching-inside-biztalk.html
4)
Orchestration Atomic Scope Node List Debatching
http://geekswithblogs.net/sthomas/archive/2005/03/21/26924.aspx
You can check out the performance of each method @
http://geekswithblogs.net/sthomas/archive/2004/12/12/17373.aspx
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Split records into two files based on lookup table
Hi,
I'm new to ODI and want to know on how I could split records into two files based on a value in one of the columns in the table.
Example:
Table:
my columns are
account name country
100 USA
200 USA
300 UK
200 AUS
So from the 4 records I maintain list of countries in a lookup file and split the records into 2 different files based on values in the file...
Say I have records AUS and UK in my lookup file...
So my ODI routine should send all records with country into file1 and rest to file2.
So from above records
File1:
300 UK
200 AUS
File2:
100 USA
200 USA
Can you help me how to achieve this?
Thanks,
Sam1. where and how do i create filter to restrict countries? In source or target? Should I include some kind of filter operator in interface.
You need to have the Filter on the Source side so that we can filter records accordingly the capture the same in the File. To have a Filter . In the source data store click and drag the column outside the data store and you will have Cone shaped icon and now you can click and type the Filter.
Please look into this link for ODI Documentation -http://www.oracle.com/technetwork/middleware/data-integrator/documentation/index.html
Also look into this Getting started guide - http://download.oracle.com/docs/cd/E15985_01/doc.10136/getstart/GSETL.pdf . You can find information as how to create Filter in this guide.
2. If I have include multipe countries like (USA,CANADA,UK) to go to one file and rest to another file; Can I use some kind of lookup file...? Instead of modifying filter inside interface...Can i Update entries in the file?
there are two ways of handling your situation.
Solution 1.
1. Create Variable Country_Variable
2. Create a Filter in the Source datastore in the First Interface ( SOURCE.COLUMN = #Country_Variable)
3. Create a new Package Country File Unload
4. Call the Variable in Country_Variable in Set Mode and provide the Country (USA )
5. Next call the First Interface
6. Next call the Second Interface where the Filter condition will be ( SOURCE.COLUMN ! = #Country_Variable )
7. Now run the package .
Solution 2.
If you need a solution to handle through Filer.
1. Use this Method (http://odiexperts.com/how-to-refresh-odi-variables-from-file-%E2%80%93-part-1-%E2%80%93-just-one-value ) to call the File where you wish to create store the country name into the variable Country_Variable
2. Pretty much the same Create a Filter in the Source datastore in the First Interface ( SOURCE.COLUMN = #Country_Variable)
3.Create a new Package Country File Unload
4.Next call the Second Interface where the Filter condition will be ( SOURCE.COLUMN ! = #Country_Variable )
5. Now run the package .
Now through this way using File you can control the File.
Please try and let us know , if you need any other help. -
Can we enable "Select record Set Message choice" of Table in left side
Hi ,
I have requirement to set the "Select Record Set " Message choice of a table region on left side.
Ex:If there are more records in a table region and message choice available to select next set of records.
You can chk in Workflow Status Monitor function.
Its the Navigation Bar to be @ left side on the table Region whcih allows you to navigate the records set.
Thanks,Sarath.
Edited by: SarathL on Dec 13, 2011 4:59 PMHi,
Not sure what exactly you are looking for.
The Next link and option to select next set of rows comes to your OA Table by default .. isn't it?
-Idris -
Hi all,
I have 2 canvas (1 canvas having database block items ,2nd having control block items & FIND button also in Control block), My requirement is when i select any one of the lov and click on the find button(in 2nd canvas , control block canvas) then it navigates to the database block canvas and displays records, at that time i want to display record count message. for this i add on-count trigger on form level, but not working, Could any one suggest me please.
declare
cnt number := 1;
begin
go_block('Blockname');
first_record;
while :system.last_record = 'FALSE'
loop
cnt := cnt + 1;
next_record;
end loop;
message('There are ' || cnt || ' records in this block');
end;
Thank You994122 wrote:
declare
cnt number := 1;
BEGIN
IF :SYSTEM.LAST_RECORD='TRUE' THEN
go_block('HOPE_FORECAST_DATA');
first_record;
loop
cnt := cnt + 1;
EXIT WHEN :SYSTEM.LAST_RECORD='TRUE';
next_record;
end loop;
FND_MESSAGE.SET_STRING('There are ' || cnt || ' records in this block');
FND_MESSAGE.SHOW;
message'There are '||to_char(cnt)||' records in this block'); message(' ',no_acknowledge);
END if;
end; -
I am creating biztalk application to store the data into sql server.
and my client says this line what i am not understood .
"Only one round trip to database from BizTalk per message irrespective of number of records in message per table."
Any one can help me to understand this line.!
Thanks,One more option is -
Create a stored procedure to perform batch insert, you can insert into any number of tables you want.
--sample SP code...just added the steps you need to know to extract XML and perform insert
CREATE PROCEDURE <SPName>
@YourXML XML
AS
BEGIN
EXEC sp_xml_preparedocument @idoc OUTPUT, @youXML
SET @j = 1
WHILE @j <= @recordCount
BEGIN
SET @xpath = '//ns1:RootNode/Record[' + CAST(@j AS VARCHAR(11)) + ']'
;WITH XMLNAMESPACES('record namespace' as ns0, 'rootnode namespace' as ns1)
INSERT INTO YourTable
(field1, field2....field20)
SELECT
field1, field2....field20
FROM OPENXML(@idoc, @xpath, 2)
WITH(field1 varchar(2), field2 varchar(20)........field20 varchar(100))
SET @j = @j + 1
END
END
On BizTalk side its quite simple...generate schema for your stored procedure...and in your map transform your XML to StoredProcedure schema using CDATA.
Hope it helps!! -
hi..
after i upgrade my c7 to new version smbyian anna why my split screen for messaging not working?
And i also cannot upload photo to social network.. Be4 upgade everthing is fine.. It is something wrong wit my phone?hm.. not too sure if this has anything to do with the current screen-flickering issue some macbook owners have or not..
as for mine, the flash of light happens during any program or with no programs at all. it's completely random. yours could be the start of a flickering issue, or it may be nothing at all. wait and see what happens with it...if it happens while using other programs or not. that's the best thing i can say. -
Hi All!
I am using Oracle Forms 6i and Oracle 9i Database.
I have a problem with forms.
When I execute query and then press Next Button to move Next Record then this message occure.
Do you want to the save changes that you have made?
Yes No Cancel
What is the actual problem and how can I solve this problem?
I do not want to show this message.
please hep me.......Provide some more information so we can help you.
That usually happens when you change a database item's value. make sure you're not changing any values after you query the data. Check the POST-QUERY trigger if you're changing any item's value. Even if you set an empty item to null you will get this message since the record's status is changed to "CHANGED".
You might also search the forum, there are several threads discussing this issue.
Save message on Navigating Record
and
Message Do you want to change the changes you have made? caused by a lov
See which case fits yours.
Tony -
Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings
Hi All,
I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated.
Best regards,
Rajiv Arora.ra33,
I am very glad to help you with this.
According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode. You can manually select to record to the SD cards, but only in the Manual or Cinema modes. If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
If there is anything else I can help you with, please let me know.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
My iphone is not recording voicemail messages that callers said they left for me-how to fix?
My iphone is not recording voicemail messages that callers said they left for me. The calls are showing up in voicemail list (no notification sound, but the discussion length is zero seconds. How do I fix this?
Most voicemail issues are dealt with by the cellular carrier and that is where the recording resides rather than on the phone. The following has some things you may troubleshoot in addition to contacting your carrier: http://support.apple.com/kb/TS4430
-
Create and approve batch record first. message: EBR015
HI All,
when i am doing UD for Early inspection lot (04 inspection type) i getting the error message "create and approve batch record first. message: EBR015"
PLEASE HELP ME,
Regards,
sbabuPLease refer:
Short Text
Create and approve batch record first
Diagnosis
You can only carry out the following functions for the batch you have selected when an approved batch record exists (see material master record, Work scheduling view):
Making a usage decision for an inspection lot of origin Goods receipt from production
Changing the batch status from Restricted to Unrestricted
However, no batch record has been created for the batch you have selected. Therefore, the system does not carry out the function.
Procedure
Create and approve the batch record.
For more information, see the SAP Library, section Basis Services / Communication Interfaces -> SAP ArchiveLink -> SAP ArchiveLink - Scenarios in Applications -> Storage Scenarios PP -> Optical Archiving of Batch Records (PP-PI). -
How can I find records of messages conversations. I have seen these records in the past, but can't find them now.
hi WHAT I HAVE FOUND AT VERIZON.COM I LOG IN TO MY ACCOUNT THEN I HOLD THE MOUSE OVER MY MESSAGING THEN I CHOOSE SEND A MESSAGE ON THAT PAGE LOOK TO THE LEFT YOU WILL SEE NAMES OF THOSE THAT HAve BEEN TEXT AND NUMBERS UNDER NAMES THAT IS the amount of texts back and forth total OF TEXTS SINCE DELETED AND DELETED FROM THE ONLINE PAGE NOT THE PHONE OR I WOULD SEE NONE ON MY. NOW I HAVE Had a name suddenly appear that wasn't like the day before with all the messages back and forth showing up also i think those are people not on contacts list. that are deleted but then a text has been sent.. so then it and all records now show up,, .. so you then just click on the messages on lefl all will show up on the right tada jeri out
-
Meeting Recording Error Message
Forum,
While trying to record a meeting yesterday, I kept receiving
an “auto recording failed” message with a yellow
exclamation point in the upper right corner of the screen. After
reviewing the recording, it looks like only the video was captured.
Has anyone received this error message before and know the causes?
Perhaps a bad connection to the Enterprise server?
Regards,
Eriksand box wrote:
Erik.......do you feel it is better to record direct to my external HD or the Imac HD?
External. IF it is Firewire. USB is less suitable, but it'll do too. The startup disk is also busy handling RAM for virtual memory, so it is doubly stressed when recording to it, and will 'refuse' to record, or drop out, or say "disk too slow" sooner.
What are the best settings for buffer and the other recording parameters?
Depends on your machine; rule of thumb: keep it as low as possible when recording for minimum latency (32, 64 or 128 or 256), and set it higher when playing back, (256-1024) to avoid "system overload".
The best recording format imo is 24 bit/44.1 KHz (or 48 KHz). If you record 10+ tracks that are all subtle acoustic recordings, it may ever so slighly improve sound/mix quality to go with 24/96KHz, but that will also double the overhead for the CPU. And imo the difference even then is hardly perceptible, save for the most highly trained professional ears.
I record basic rock with 16 tracks or less and not overly complicated effects. Also I still don't understand what "flattening" of a track means. Thanx.
Okay, so 24/44.1 is enough for that. Flattening a track means that you make a new audio file (solo the track, and bounce) that includes the plugin effects you applied to it. It is an (old fashioned) way of freeing up CPU (because you can switch off the plugins afterwards and use the 'flattened' audio file).
Freezing provides a better alternative for freeing up CPU though. Look it up in the manual, it is a simple and effective feature.
regards, Erik.
Maybe you are looking for
-
Help with getting labview to use logic.
I am a beginner working on a research project at Louisiana Tech University. I inherited a labview file from a previous researcher and need to edit it to include a little logic. The program basically looks at four inputs for either a low or high read
-
How can I save photos on my ipad3 since downloading iOS6 I do not get SAVE PHOTO option only DONE. Please don't be too technical I am74 and really only use my ipad for photos and emails
-
So my two kids have been using my Apple ID / account on their computers (iMacs x 2). I have purchased music for them with that account, plus movies, plus ripped some kids cds. I want to get them their own acounts so that I can un-authorize their two
-
The scenario is like this u2026u2026u2026 When an employee getting transferred within the company code or to other company code , HRA AND WASHING AND FACTORY allowance are getting doubled, to avoid this we have changed the processing class 10 from 0
-
Advantages of ADF Binding/Controller without ADF BC
I have been using ADF from last few months and I am trying to understand if there are any advantages of using ADF Binding and ADF Controller layers in web application when we are not using ADF Business components? I understand that ADF Binding and AD