Advantages of ADF Binding/Controller without ADF BC

I have been using ADF from last few months and I am trying to understand if there are any advantages of using ADF Binding and ADF Controller layers in web application when we are not using ADF Business components?
I understand that ADF Binding and ADF Controller gives us declarative way of doing things, but apart from this are there any other advantages?
The web application that I am trying to code uses lot of forms.
thanks,
-Srini.

Beyond taskflows and their advantages (basically JSF on steroids with reusability), the binding layer saves you a lot of coding of managed beans and JSF page code.
Without the declarative binding you'll need to write a managed bean that access your EJB to get the data, then write the EL in each JSF field to map it to the managed bean data.
The ADF binding also gives you thing like the query component, UI hints, and declarative validation on top of JPA/EJB combination.

Similar Messages

Is it possible run a Wireless LAN controller without a WCS?

is it possible run a Wireless LAN controller without a WCS?
How Can I configure the Wireless Lan controller?
Thanks

Hi Alfred,
The WLC can be completly configured and operated without the WCS. The WCS is a nice addition for the management especially when running multiple WLC's but is not required.
Info on WLC (with Video);
http://www.cisco.com/en/US/products/ps6366/index.html
Info on the WCS;
http://www.cisco.com/en/US/products/ps6305/index.html
Hope this helps!
Rob

I want to configure the 7330 motion controller without using MAX

I am new to labview and I have a project where I have to configure the 7330 motion controller without using MAX. What do I need to do to get started doing so?
Thanks for the help!
nw2labview

Hi,
There are several VI's that are included with the motion driver for configuring your controller. They are located on the function pallete under Vision and Motion>>Ni-Motion>>Axis Configuration. Using these VI's you will be able to configure your axis. But why don't you want to use MAX? If you are new to LabVIEW I would suggest configuring and testing your motor in MAX first before you start programing. Once you have it working there you may want to look at several of the examples such as Simple One-Axis Move.vi. I hope this helps.
GG

Binding Controller context nodes to two (RFC)models

Hi group,
i have an table, which is based on an BAPI_GET.
This table is editable - and I want to update the data in R/3 with another bapi BAPI_SET.
BAPI_GET and BAPI_SET have the same structure T_DATA as "table".
Unfortunately I cannot bind the elements of the context (which are created from BAPI_GET) to BAPI_SET. Message is:
<b>Invalid model relation. The corresponding model class does not match the model class of the associated parent context node</b>
Any suggestions would be great, thanks alot,
Simon

Hi Matthias,
thanks very much for this idea.
I'm gonna try that!
Unfortunately my second models isn't executable (not "execute" method). Maybe some idea for that as well?
Thx,
Simon
P.S:
(Another idea would be: creating an additional controller with one context between the "BAPI Controller" (with the two contexts) and the UI to "bundle" the mapping..)
P.P.S:
Sorry Matthias - somehow the rewarding <b>in this particular post</b> doesn'nt work.
If you see another post of mine - just drop in - i'm gonna get you the points, you deserve.
Message was edited by: Simon Prinzleve

How can I power up the 8115 controller without using 1078 momentary contact switch.

I am using an 8115 controller installed in a PXIe-1078 chassis. I am rack mounting the system and I have numerous cables originating at the PXIe-1078 chassis that prevent me from using the front panel momentary switch. Is there a method to have the 8115 boot without using the momentary switch on the PXIe-1078 front panel?

Hello EdH,
Unfortunately there is no way to remotely control the power line of the PXIe-1078. Though the PXIe-1078 has a DIP switch on its backplane this only toggles the control of the Power from the Controller to the Backplane. With this you may be able to mimic a power on sequence but that is unsupported.
Regards,
-Travis E
National Instruments
Applications Engineer

Extending controller without personalization

Can a controller be extended without using personalization to make the substitution? How about using a jpx file?
The controller I am looking to extend belongs to a table attachment region that Oracle seems to use for multiple pages and applications so there is no page for me to personalize.
Any ideas?

Best option will be to go through the Functional Admin resp. There you can find the region based on many criteria and selecting that will bring to the personalization screen.
--Shiv

Change Account name on my domain controller without losing my data

Hello every one
I need to ask an important Question for me
On my domain controller i create a new user on my active directory " EX : Hashem Hamdy and account is : Hashem " after that i make some modification on my network and i need to rename this user and change log in account from " Hashem
to Hashem_Hamdy " without losing data on my desktop , email configuration
can any one help me please

Hi,
You can rename the AD account the SID will till rename the same, so the logon profile will be kept. The logon profile folder on the local machine will still remain with the old username and everything within the profile will be there.
Below is a link with some of the implications here. Pay attention on the profile path and home folder in case you have these populated at user properties, you'll have top update as well.
http://blog.foreignkid.net/2010/07/rename-ad-account-what-about-the-windows-profile/
Regards,
Calin

How to define and work with bind-variables without the dialog-box ?

I want to select different tables with the same bind_variables,
but do want not fill the bind-variables-dialogbox
everytime I use the select statements
because I could simple edit and bind this bind-variables once
at the first select.
select col1, col2 into :bind1, :bind2 from mybasictable_10 where col3 = 'ABCD':
select * from mytable_b where b1 = :bind1 and b2 = :bind2 ;
select * from mytable_c where c1 = :bind1 and c2 = :bind2 ;
select * from mytable_d where d1 = :bind1 and d2 = :bind2 ;
select * from mytable_e where e1 = :bind1 and e2 = :bind2 ;
it doesn't work and I didn't find that in help,
how does it work in sql-developer ?
regards

david,
back to the root of my question:
I do use an 10 years old low-end sql / plsql-tool where I can simple and fast do sql-things like that:
select col1, col2 into :bind1, :bind2 from mybasictable_10 where col3 = 'for_example_ABCD':
select * from mytable_b where b1 = :bind1 and b2 = :bind2 ;
select * from mytable_c where c1 = :bind1 and c2 = :bind2 ;
select * from mytable_d where d1 = :bind1 and d2 = :bind2 ;
select * from mytable_e where e1 = :bind1 and e2 = :bind2 ;
I would like to use oracles SQL-Developer instead of this 'old' tool,
and want to use my 'old' sql / plsql scripts
but the SQL-Developer in this matter seems is to much complicate to use,
I can do complex and big things with sql-dev,
but not simple using bind-variables ;-)( .

Is it possible to use a cRIO controller without the FPGA backplane?

Obviously, I'm talking about the modular units (cRIO9014 or 9025) and not the all-in-one models. If we have no IO/FPGA requirements for an application, can we just use the controller by itself? I realize this isn't the most optimum use of this hardware, but we are dealing with a requirement.
Thanks,
Chris
Solved!
Go to Solution.

Hi Chris,
yes, you can.
You're limited to the in/outs of the controller itself (USER switch, USER LED, LAN-Port, maybe RS232), but you can run the controller on it's own...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

LWAPP AP finds controller without benefit of option 43

This is quite the head scratcher. I have installed about 7 AP's that pulled a DHCP address from a scope that (accidentally) had no DHCP option 43 associated to it.
It is my impression this should not of worked. The LWAPP firmware is 4.0.179.11
but is full of AP's that did not find the controller with out option 43.
How could this be?

LWAPP AP's discover controller thru other methods as well. DHCP Option 43 is only one of those methods.
> Pre-Configured (aka Primed) AP's will remember their previously joined controller's Mgmt IP address in NVRAM
> DHCP Option 43
> DNS entry 'CISCO-LWAPP-CONTROLLER.localdomain' lookup
> Local broadcast domain (same subnet)
> OTAP - Messages from neighboring AP's
Your AP's must have found the controller thru one of these methods.
Does this help (feel free to rate this response).

USB-Controller without proper driver

HP COMPAQ 15-a026sg
OS: Win 7 Ultimate 64bit
Under tools manager i have lack of one tool.
The name is USB (Universal Serial Bus)-Controller and I can see details:
PCI\VEN_8086&DEV_1E31&SUBSYS_218F103C&REV_04
It is something like "Intel(R) USB 3.0 eXtensible Host Controller", but this driver does not work:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-132256-1&cc=de&dlc=de&lc=de...
Which driver should I use?
This question was solved.
View Solution.

I was trying now another driver and it hopefully works:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127277-1&cc=de&dlc=de&lc=de...

Video controller without driver

hi , i'm having problems with my toshiba satellite 1400 s151 , i have a video output on my laptop but no driver to run it. i cant figure out what to do if anyone could help that would be sweet!!

install this driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/s140vid2.exe
Fixing Computers no Jutsu! (Ninja Help and Support Technique )

Validation messages in JSF (when not using ADF faces)

I've spent some time with JDeveloper 11 and would like to use it on an upcoming project. I have to target IE 6, so I won't be able to take advantage of ADF Faces. Instead I'd like to use the ADF Business Components with a standard JSF interface so it can be used by people still running IE 6.
I've created a Business Component from a database table and can bind a JSF HTML Creation Form by dragging the appropriate view from the AppModule in the Data Controls pane. However, when I attempt to submit the page without all the fields being valid I get the following validation error message:
j_id__ctru2:j_id__ctru6: Validation Error: Value is required. j_id__ctru2:j_id__ctru6: Validation Error: Value is required.
I've tried making this more descriptive, but editing the error message in the Validation Rules section of the Business Component has no effect. What's the best way to convey a meaningful validation message to the user when not using ADF Faces?
Also - I'm still very new to JDeveloper. Since I won't be able to rely on my users having Internet Explorer 7, would you recommend I stay with JDeveloper 10? The examples and documentation I've seen so far for JDeveloper 11 appear heavily biased towards using ADF Faces so I'm starting to wonder how much support is there for using plain old JSF.
Thanks for your time!

Hi,
if you are completely new to this then I suggest to use JDeveloper 10.1.3 and ADF Faces in there. Its good to use with IE6 as well. Currently we do have more tutorials available for this release than for 11, which for this reason is a better choice for someone new to this
Frank

Using ADF resetButton to reset a selectOneChoice

Hi all,
I have an issue resetting the content of a page. Here's a simplified example:
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/EA13/html" prefix="ah"%>
<%@ taglib uri="http://xmlns.oracle.com/adf/faces/EA13" prefix="af"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<f:view>
<ah:html>
<ah:head/>
<ah:body>
<af:form id="form">
<af:messages/>
<af:selectOneChoice id="city" label="City" value="#{controller.city}" autoSubmit="true" valueChangeListener="#{controller.synchToCity}" immediate="true">
<f:selectItems value="#{controller.list1}"/>
</af:selectOneChoice>
<af:selectOneChoice id="street" label="Street" value="#{controller.street}" partialTriggers="city">
<f:selectItems value="#{controller.list2}"/>
</af:selectOneChoice>
<af:inputText id="firstName" value="#{controller.firstName}" binding="#{controller.first}"/>
<af:inputText id="lastName" value="#{controller.lastName}" binding="#{controller.last}"/>
<af:resetButton text="Reset" />
</af:form>
</ah:body>
</ah:html>
</f:view>
initial Context: the city dropdown contain a list of cities and street dropdown doesn't contain anything.
Other information:Once you choose a city, it populate the street dropdown with the proper set of streets. To create that synchronization, I use:
* autoSubmit=true + valueChangeListener + immediate=true on the city dropdown
* partialTriggers=cityDropDownId
Expected behavior: I want to be able to reset the whole page to the initial context.
Obtained results: The input fields are reset properly (because I use a context.renderResponse in the method that handle the valueChangeEvent) but the lists are not reset to their original values (city = the first item in its list and an empty collection for street).
Note:This work pretty well when there's no autoSubmit...
is it possible to produce such a reset? does it have something to do with the state of the component (is it possible that the State is saved when we skip the rest of the lifecycle using immediate=true + context.renderResponse?)
thanks in advance for any help!

Let's rephrase the problem:
I have did some more investigation and I found that when I don't use autoSubmit=true, the reset button works just fine.
But when I use an autoSubmit=true, the component that change it's value won't be reset to it's prior state even if I'm using immediate=true and skip the "Update Model Values" phase.
My guess is that the State of the component is updated and I'm looking for a way to avoid or bypass that.
Thanks!

Struts integration with ADF

HI All,
I have questions related to the architecure .
I have plans to integrate the Struts with ADF11g ,i think this kind of requirement is very less .
Plase tell me the adavantges and disadvantages over it ,give some refrences links,videos
Thanks

Hi.
Struts was one of the possible options in ADF 10g for the controller layer. It has been dropped in 11g since we now provide task flows, which we feel are better suited to modern rich applications. Do not forget that Struts is Action-based, whereas JDF/ADF are Component-based. Thus, Struts and ADF 11g are not a really good fit together. (See http://java.dzone.com/articles/categorization-web-frameworks)
For reference, the main advantages of ADF task flows are:
- The application can be broken up into a series of modular flows that call one another.
- You can add to the task flow diagram nodes such as views, method calls, and calls to other task flows.
- Navigation is between pages as well as other activities, including routers.
- ADF task flows are reusable within the same or an entirely different application.
- After you break up your application into task flows, you may decide to reuse task flows containing common functionality.
- Shared memory scope (for example, page flow scope) enables data to be passed between activities within the task flow. Page flow scope defines a unique storage area for each instance of an ADF bounded task flow.
(Source: http://docs.oracle.com/cd/E23943_01/web.1111/b31974/taskflows.htm)
Best Regards,
Frédéric.

Advantages of ADF Binding/Controller without ADF BC

Similar Messages

Maybe you are looking for