Splitting a line in to two lines

This is something that I would not even have questioned how to do, if i did not have a problem doing it.
I can split a line in two quite happily in Text Edit, or this very text box that I am typing this post in, but Pages will not do it.
I am typing in a text box in a Page Layout document.
I realise that I want to break a line in to two lines.
I put the cursor at the point where I want the text split in to the new line, and hit the return key,
All the text to the right of the cursor gets deleted.
Before anyone says it, No, the text to the right of the cursor is not highlighted.
Surely putting a line break should not be that difficult.

You are correct that this shouldn't be a problem so either there's something wrong with your installation of Pages or there's more to this than you've mentioned. What I suspect is that you are entering text into a small text box that can only hold one line of text. When you press return the text to the right of the cursor moves down a line exactly as you'd expect but the text box, able to show only one line, can't display it. Do you see a box around your line of text? When you press return do you see a little plus sign under the line you can see?

Similar Messages

Unable to find line break between two lines in attachment file.

Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF;     -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF;     -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;

Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file.

When typing an email, when I go to next line, it skips two lines instead of one line. How do I correct it?

I was typing an email and when I would go to the next line, it will skip two lines instead of one line. How do I correct the problem?

I am not sure I understand the problem. Could you include a screenshot of it right after it happens?
If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

How to Increase Line space between two lines in ALV Grid

hi,
I want to increase the line space between any two lines in ALV GRID. Can anybody has solution for this issue.
Regards,
Madan

Hi Madan
It's not possible
Regards
Gregory

SAP Script : to display the material description in two lines

Hi All,
I'm working on scripts.
the material description field is been passed from my driver program ..into the script..
Ex: &gs_final-maktx& ..
There r a number of other fields to be displayed ...after this field ....
Is there any option to split the 'Material description into two lines'?
Ex: at present it is :
This is material description
Requirement is:
This is material
description
I mean that there a number of field berfore and after this field......in the same line
I need to jst split the materia description ...& make it to appear in two lines.....!!
Expecting your suggestions....
Edited by: vidya vidya on Nov 11, 2008 3:17 PM
Edited by: vidya vidya on Nov 11, 2008 3:20 PM

FM TEXT_SPLIT ?
..but i handled this by code.
DATA:      zzboldsx(18) TYPE c,
      zzboldsx2(18) TYPE c,
      zzboldsx3(18) TYPE c,
      zzboldsx4(18) TYPE c.
DATA: i_lines TYPE STANDARD TABLE OF tline WITH HEADER LINE ,
        r_lines TYPE tline,
        v_cnt LIKE sy-tabix.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      client                  = sy-mandt
      id                      = stxh-tdid
      language                = stxh-tdspras
      name                    = name
      object                  = stxh-tdobject
    TABLES
      lines                   = i_lines[]
    EXCEPTIONS
      id                      = 1
      language                = 2
      name                    = 3
      not_found               = 4
      object                  = 5
      reference_check         = 6
      wrong_access_to_archive = 7
      OTHERS                  = 8.
IF sy-subrc = 0.
* Only 4 lines of Header text supported. Can add if needed
    LOOP AT i_lines INTO r_lines.
      CONDENSE r_lines-tdline NO-GAPS.
      v_cnt = v_cnt + 1.
      CASE v_cnt.
        WHEN 1.
          zzboldsx = r_lines-tdline.
        WHEN 2.
          zzboldsx2 = r_lines-tdline.
        WHEN 3.
          zzboldsx3 = r_lines-tdline.
        WHEN 4.
          zzboldsx4 = r_lines-tdline.
        WHEN OTHERS.
          EXIT.
      ENDCASE.
*   zzbolDSX = i_lines-tdline .
    ENDLOOP.

JTable ToolTip in two lines

Hello everybody,
Please advise me how to make a JTable ToolTip to be displayed in two lines
Thanks,
Elena

Use HTML tags to split tool tip text between two lines. For example:
JTable table = new JTable();
table.setToolTipText("<html>This table's tool tip text is split between two lines</html>");

The intersection point of two lines in 3D

How to calculate the intersection point of two lines in 3D?
source code!

this is actually a rather easy operation. lets look at some basic properties of lines / vectors in 3D space:
1. If two lines intersect at a single point, then there must be exactly one plane in which the two lines are co-planar. This is pretty trivial to prove, but I won't bother here, because you can google to find out that two vectors that extend from a common point define a single plane.
2. If you take the cross-product of two vectors, the resulting vector is guaranteed to be perpendicular to both lines (this is a basic property of a cross-product). If the two lines intersect, then this cross-product will be the normal vector to the plane in which both lines lie.
3. Now transform (rotate) yours space such that your z-axis becomes parallel to the normal vector of that plane.
Now, the parametric equation for a line in 3D space is this:
(x, y, z) = (xo, yo, zo) + k(xd, yd, zd)
After you have transformed your space, you will notice that the equation of each line will now be
(x, y, z) = (xo, yo, zo) + k(xd, yd, 0)
If zo is equal for both lines, then the two lines intersect. Otherwise, the two lines do not intersect.
if the intersection exists, then to solve for it, you ignore the z coordinate, and treat it like a two dimensional system:
(x, y) = (xo, yo) + k(xd, yd)
you can use the basic 2D formula y - yo = m(x - xo), or y = m(x - xo) + yo
you can calculate m = yd / xd.
which simplifies to y = mx -mxo + yo, or 0 = mx - y + (yo - mxo)
you now have two equations of the form Ax + By + C = 0.
From there, you can use Cramer's rule to find the intersection of the two lines.
It sounds kind of complicated when you read it as I have presented it, but it's actually extremely easy to write a program for, because each step is simple mathematic operation with basically no decisions involved (hence no if-structures, except at the one point where you actually need to determine if the lines intersect).
So to reiterate, the steps required are:
1. Check if lines are parallel. If yes, check if they are the same line, and then stop.
2. If not parallel, cross-multiply the direction vectors of each line.
3. Rotate your space such that z is parallel with cross-product of lines
i. dot-product of z axis (0, 0, 1) with cross-product of lines gives angle*
ii. cross-product of z axis (0, 0, 1) with cross-product of lines gives axis of rotation.
iii. rotate your lines (i.e. point and direction vector) about that axis by negative of ange determined in (i).
4. if z value of points from both lines is the different, no solution. stop.
5. otherwise, apply Cramer's rule.
6. done.
* obtaining the angle of rotation with the dot product relies on the angle being less than 90 degrees, so check if z value of normal vector is + or -, and then perform dot product and cross-product on appropriate + or - z vector.
- Adam

Is there a way to enter a title for a menu on two lines in a horizontal popup?

My popup menu is too long because there sdoes not seem to be a way to adjust individual cell widths. All the menus conform to the largest-widest text.
Is there a way to line break into two lines or adjust some of the menu widths?

You can set widths under the Advanced of the pop-up menu editor, but not for individual cells. There is currently no method for wrapping text to two lines.

A circle and two lines

Hi,
There is a point P(x,y). which is intersect by two lines. These two lines make a circle, with r. I need to know, coordinate of A or B. I cant figure out this by using math theorems.
You can see what i mean with picture at link
[http://img24.imageshack.us/img24/497/71539920.png]

somethg wrote:
Hi,
There is a point P(x,y).OK so far.
which is intersect by two lines.How do lines 'intersect' a point?
These two lines make a circle, with r.Even more obscure.
I need to know, coordinate of A or B.What are A and B?
I cant figure out this by using math theorems.Not surprising, since you can't express the requirement clearly and concisely. That's the first thing to take care of.
You can see what i mean with picture at link
[http://img24.imageshack.us/img24/497/71539920.png]
Blocked for me, and I imagine it would be blocked for many other members too.
Recommended reading: http://catb.org/~esr/faqs/smart-questions.html
db

Printing line items in next line smartforms

how to print line item description in next line...
suppose
i have line item description as
"this is description of line item"
then i need to print as
"this is"
"description of line item"
in two lines......
so that no trunkation takes place please reply me ....

Use offset
v_text(20)
in the second line use
v_text+20(40)
If this does not work
then declare two more fileds
and write the code
v_text1 = v_text(20)
v_text2 = v_text+20(40)
and print the new fields
Reward points if useful,
Regards,
Nageswar

Free Goods sub item split in two line items

Sir,
I give free good along with sale item ,but i want free goods quantity split in two lines ,so how I do that?
Please help .

Hi,
Free goods has the following limitations:
- Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: u2018With material 1, material 2 and material 3 are free of chargeu2018 or u2018If material 1 and material 2 are ordered at the same time, then material 3 is free of chargeu2018.
- Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
- Free goods are only supported for sales orders with document category C (for example, not quotations).
- Free goods are not supported for deliveries without reference to a sales order.
- Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
- If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
Not all Sales Order can be used for free goods determination. You have to check the SD document category if it does not work. Only category 'C' are supported. Check transaction VOV8.
Assume that you want to configure an inclusive FREE goods routine. Customers must order a minumum quantity of 5 before any free goods can be assign. For every quantity of 3, the customer will be given 1 free goods.
WC07 - Maintain Number Range Intervals
e.g.
No   From number       To number
01    0000010000         0000099999
IMG -> Sales and Distribution -> Basic Functions -> Free Goods ->
Maintain Access Sequences
New Entries
Acsq
NA00
Save
Maintain Condition Types
New Entries
Ctyp   Name             AcSq
FREE Free Goods    NA00
Save
Maintain Pricing Procedures
Procedures
New Entries
Procedure   Description
FREE           Free Goods
Select Procedure FREE then click Control data
Step   Cntr   Ctyp
10       10      FREE
V/N6 - Activate Free Goods Determination
Assign Order Type OR with Document Procedure A with Procedure FREE
VBN1 - Create free goods determination
e.g. FREE inclusive
Material Min qty   From   are free good   Calc Rule   Free Goods
                       5           3                1                      1                1
In this example, if you create a Sales Order for a quantity of 10, SAP will prompt you 7 as the customer order qty and 3 will be free. Customer only pay for the 7 quantity
Hopefully this will help to resolve the answer.
Thanks & regards,
Pankaj Mahajan
Edited by: PM on Apr 13, 2010 10:28 AM

Query : In rows, can we split heading in two lines?

Hi Friends !
I know, in columns, we can split the heading in two lines.
In Rows, characteristics " Nomination Header " is there. The output should come like:
Nomination
Header
Awaiting your inputs.
Thanks
Rekha

Hi,
After entering the text Nomination click on enter button and type Header , in the query designer.
With rgds,
Anil Kumar Sharma .P

Ask split long text into two line into same cell for ALV

Dear All,
Is it possible split long text into two line into same cell for ALV display data?
Regards,
Luke
Moderator message: please search for information before asking.
Edited by: Thomas Zloch on Feb 24, 2011 10:12 AM

Keep options: Select the paragraph, then CtrlAltK (Mac: CmdOptK, I
think).
If you want the paragraphs in pairs, create two paragraph styles. Style
A has keep options set to start on a new page, and also, its Next Style
is style B.
Style B has no keep options, but it's Next Style is Style A.
Select all the text.
From the flyout menu of the paragraph styles palette, apply Style A
"then next style."
Now all paragraphs will be alternating -- style A, style B, style A, etc.
Now do what I wrote initially, and you'll have pairs of paragraph in
separate text frames.

File adapter-How to set line break in text file-split record into two lines

Dear Guru's,
I have to solve following problem with XML (with mulitiple records) to TEXT file scenario using file adapter. I have to output for ever ONE data record in XML always two identical lines in text file. Second line should have a little bit different mapping in few fields like date,... So I did duplicate fileds in my output structure in mapping and need to know how to set line break in the middle and see half of structure in first line and next structure half in second line
My output structure in mapping is:
CASHFLOW
- INTERFACE
- GESELLSCHAFT
- ANWENDUNG
- PRODUKT
- VERTRAG
- BETRAG
- WAEHRUNG
- DIRECTION
- BEWEGUNGSTYP
- FAELLIGKEIT
- ZINSFESTSTELLUNG
- ZAHLUNGSTAG
- RENDITE
- INTERFACE2
- GESELLSCHAFT2
- ANWENDUNG2
- PRODUKT2
- VERTRAG2
- BETRAG2
- WAEHRUNG2
- DIRECTION2
- BEWEGUNGSTYP2
- FAELLIGKEIT2
- ZINSFESTSTELLUNG2
- ZAHLUNGSTAG2
- RENDITE2
Question is how can I set on receiving file adapter in Content Conversion Parameters that fields from first structure half INTERFACE...RENDITE should be outputed in one line and fields from second half of structure INTERFACE2...RENDITE2 should start on second line in final text file.
I'm getting at the moment one line only and I need to know how can set line break so that second line starting with INTERFACE2(CA)...RENDITE2 will start in new line.
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000",CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
This should be final output:
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000"
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
My file adapter settings:
RecordsetStructure=CASHFLOW
CASHFLOW.fieldNames=INTERFACE,GESELLSCHAFT,ANWENDUNG,PRODUKT,VERTRAG,BETRAG,WAEHRUNG,DIRECTION,BEWEGUNGSTYP,FAELLIGKEIT,ZINSFESTSTELLUNG,ZAHLUNGSTAG,RENDITE
CASHFLOW.fieldSeparator=,
CASHFLOW.endSeparator='nl'
CASHFLOW.fieldNames=INTERFACE2,GESELLSCHAFT2,ANWENDUNG2,PRODUKT2,VERTRAG2,BETRAG2,WAEHRUNG2,DIRECTION2,BEWEGUNGSTYP2,FAELLIGKEIT2,ZINSFESTSTELLUNG2,ZAHLUNGSTAG2,RENDITE2
CASHFLOW.fieldSeparator=,
It wont help if I add two identical structures in mapping because in output i would see for multiple entries section with first lines only and after that section with second lines only. And CASHFLOW is one part of more complex mapping ...
(This is final output structure RecordsetStructure=HEADER,CASHFLOW,CONDITION,REFERENCE,CONTRACT - more sections with different data and all these should have duplicate lines at the end)
Thanks a lot for any help
Cheers
Marian
Edited by: Marian Luscon on Jul 14, 2009 11:44 AM

Hi Ivan,
right, I did test just for sure.
Putting constant 'nl' into field CASHFLOW-INTERFACE1 didnt help - still getting one line instead two lines.
CA ,"0100" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,2 ,12 ,2009-01-28 ,2009-01-27 ,2009-01-28 ,"0.0000000" ,'nl' ,"GTP1" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,1 ,10 ,2009-01-27 ,2009-01-27 ,2009-01-27 ,"0.0000000"
So there is still question. Is there any way (mapping,...) how to output always 2 lines in text file for one record in XML. It always does 1 record in mapping structure = 1 line but we need 2 lines ...
Example:
Input: 4 records in XML
Output: 8 lines in final text file ...
Thanks to you all guys
Marian

Tabular report, how to split row into two lines per record

Hi, I have a tabular report based on a collection. The collection has 15 fields and appears horizontally across the screen. I would like to have a break after the 5th column so that each row is on two lines instead of one. Is this possible...any information would be helpful.
a shortened query is: and I would like the break to be between c028 and c029.
thanks
Karen
Select apex_item.select_list_from_lov_xl
(28,
c028,
'GEARS',
'style="width:200px;background-color:#FBEC5D; "'
|| 'onchange="f_set_casc_gear(this,f29_'
|| LPAD (seq_id, 4, '0')
|| ')"',
'YES',
'0',
'- Select Gear -',
'f28_' || LPAD (seq_id, 4, '0'),
NULL,
'NO'
) gear_code,
apex_item.select_list_from_query(29,
c029,
'select lma_desc e, lma_code r
from lobster_mgmt_area
where 1 in (select 1 from gears where gear_code = '
||nvl(c028,0)
||' AND (type_code in (''005'') and category_code in (''160'')) OR ('
||nvl(c028,0)
||' in (''130'')) ) order by lma_code ',
'style="width:75px"',
'YES',
'0',
'- Select -',
'f29_' || LPAD (seq_id, 4, '0'),
NULL,
'NO') lma_code,
apex_item.text
(30,
c030,
6,
NULL,
'style="width:50px;background-color:#FBEC5D;"'
) gear_quantity
from collections where collection_name = 'EFFORT_C'

Hello Karen,
>> and each field needs to be updateble ( concatenating two fields does not allow for that).
Did you notice the ‘ ’ component, as part of the columns concatenations?
The following example is using the same principle – every two updatable column, from the employees table, are sharing the same tabular form row - http://htmldb.oracle.com/pls/otn/f?p=22710:420 . The report query is:
select apex_item.text(10,first_name)||' '||apex_item.text(11,last_name) col01,
apex_item.text(12,phone_number)||' '||apex_item.text(13,email) col02,
apex_item.text(14,salary)||' '||apex_item.text(15,commission) col03
from employeesThe same principle is being used to define custom headings.
Hope this time it will be more clear.
Regards,
Arie.

Splitting a line in to two lines

Similar Messages

Maybe you are looking for