Splitting one message into two files

Hi all,
I have a case where I have to generate two files for a single incoming message.The scenario is as follows-
I have the following structure as target -
- Structure 1 with some fields in it
- Structure 2 with some fields in it
I have done the mapping of the target with the source.
Now what I require is a separate file for structure 1 and another file for structure 2
Thanks,
Sandeep

You need to use BPM for this.
First create a message mapping with one source and two targets.
To add more message types to a mess map, go to the Messages tab (there are 3 tabs: Design, Test, Messages ).
Then you need one transformation and two send steps in the BPM.
regards
SKM

Similar Messages

Split one IDoc into two IDocs ?

hello all,
I wanna split one IDoc into two IDocs in XI?
how can implement it?
plx give some suggestions.
thx in advance
best regards
Yaning
Message was edited by:
Yaning Liu

Yaning,
Please find the below blog for changing the ocurrences of IDOC
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Best regards,
raj.

ICal splits one event into two, how do I fix this?

I have one weekly repeating event entered. For the first two weeks it shows up like normal, as one event. But two weeks later it splits that one event into two different side-by-side bubbles. I did not alter the event. Does any one else have this problem? How can I fix this?

That is because you are sharing an Apple ID.
On both phones go to:
Settings > Facetime > turn off iPhone Cellular Calls
I would also suggest you check here to make sure your husbands number is not checked on your phone or yours on his:
Settings > Messages > Send & Receive
Settings > Facetime
Otherwise you will get each others Messages and FaceTime calls.
I recommend that you each get your own Apple IDs if for nothing else than iCloud, iMessage & FaceTime.

How to split one monitor into two, differently configured desktops

Hello,
I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
- one window/space on one side (say, on the left) of the screen would contain the document from top to bottom, with no dock bar on the bottom
- the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
Is this possible? Can anyone recommend an application or type of setup?
Thank you,
-celso

Looking for something like this?
You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
http://www.funk-isoft.com/index.php/display-maid

Help... Why did the dvd to ipod converter split one movie into 2 files?

I have a 80GB Video Ipod and I'm confused on why when I ripped a dvd using the dvd to ipod converter for mac program it split the dvd into 2 files.. Is there a way I can merge the files together so it is 1 file?.. I would apprciate any help or suggestions...
G3 Ibook.. 15, 40 and 80GB Video Ipods... G4 PowerMac Mac OS X (10.4.2)

Go to their support forum and ask-you will get a better answer from people who actually use the program.
It's not a paid for program is it?
A totally free program that rips and converts DVD's for Macs can be found here: http://handbrake.m0k.org/
Why would anyone on a Mac pay for a DVD rip program?

PRE9: How to split one clip into two (or more) clips?

I can't believe this is so hard to do... But HOW?

You don't necessarily need to separate the file into individual clips. When you do a cut on the timeline, this is a virtual cut, leaving the original file untouched but determining what will appear in the output. You can split the clip into multiple pieces, delete the bits you don't want, add transitions, insert new bits, whatever you want, all without affecting the original file in any way. Once you're happy, you output a new file using the Share options, and you get a new video file, with your original files still untouched.
If you want to split your file into multiple individual files, you can use the sliders on the time scale, and export (Share) using the Share Work Area Only checkbox. If you're doing this for purposes of reassembly, it would be better to save the individual clips in as lossless a format as possible, the default AVI format taking considerably more space but not losing quality. Hint: the sliders can be positioned to the time marker using Alt-[ and Alt-]. Once you've done this, note that your original file will still be there, untouched.
There is also VideoRedo Plus, a cheap program which gives frame-accurate selection and allows rapid subdivision of a piece of footage. It doesn't re-render as PE9 would (this is where loss of image quality creeps in using compressed formats such as MPEG), copying the original frames. You can then reassemble the bits using your video editor.

Music app splitting one podcast into two - why?

I have a 4th gen iPod Touch running iOS 6.1.6 - newest available. I listen to podcasts through the standard Music app. For some reason I have one podcast that shows up as two on that app - even though they have the same name. AND in iTunes on my Mac it is a SINGLE podcast that contains all of the episodes - including the six that are split out on the iPod. No change in the stream location; no change in the podcast name; nothing different between the meta fields when you do "get info" on the podcasts. In that separate podcast on the iPod, there are 6 podcasts (un-played) from 2012. Everything in the "main" podcast that is un-played is 2013 or newer.
I done a lot of googling and can find nothing on split podcasts other than when the actual podcast changed its name or the stream location. This is not the case here.
Any ideas???

This thread helps you, at least Brian's answer:
https://discussions.apple.com/message/23507673
At least this was the resolution for me.

Splitting one site into two

I have one large site which has two distinct sections. Each section has multiple pages. I have two domain names.
I would like to split the site by removing one of the sections and making a new site with these pages.
I imagine it is not difficult, but could not locate this in a search.
Thank you.
asuch

asuch:
It's very easy to do. Create a new site and drag the pages from site 1 to site 2. Somewhat the opposite as shown here.
OT

Splitting one column into two columns

Hi,
How to create two columns in one column header using JTable swing concept in java.
Thanks in advance

[http://forum.java.sun.com/thread.jspa?threadID=488822&messageID=2297054]
you can use MultiLineHeaderRenderer class for this purpose. search for that class and examples
sunil

Split one message and create N Files on target side based on FieldName

Hi Experts
How to split one message into N messages
I have used BPM and I have put
One Receiver Step
One Transformation Step and
One Send Step.
In Receiver step I have used Correlation as Field2
In Tansformation Step I have done One to One Mapping
But In receiver Side only one File is creating.
Message Structure is
<Main_MT>.... 1...1
........<test>01</test>.... 1...1
...........<Sub_MT>...... 0...Unbound
................<Field1> </Field1>
................<Field2>123</Field>
..........</Sub_MT>
..........<Sub_MT>...... 0...Unbound
................<Field1> </Field1>
................<Field2>234</Field>
</Sub_MT>
</Main_MT>
How to resolve this problem
Thanks & Regards
Sowmya

Hey Jayson,
I dint search the blogs using the keyword " mutiple mapping". The given two blogs I had used for creating my first 1:n mapping, so their names are by heart to me.
I believe both the blogs provided by me help in creating the mutiple seperate messages on the target end.
The Claus's blog covers more detailed mapping logic for message split and the Jin's blog covers the ID pieces needed to be configured when we want to create mutiple messages on the target end.
Pardon me if I have misconstrued your point.
Thanks,
Pooja

Split records into two files based on lookup table

Hi,
I'm new to ODI and want to know on how I could split records into two files based on a value in one of the columns in the table.
Example:
Table:
my columns are
account name country
100 USA
200 USA
300 UK
200 AUS
So from the 4 records I maintain list of countries in a lookup file and split the records into 2 different files based on values in the file...
Say I have records AUS and UK in my lookup file...
So my ODI routine should send all records with country into file1 and rest to file2.
So from above records
File1:
300 UK
200 AUS
File2:
100 USA
200 USA
Can you help me how to achieve this?
Thanks,
Sam

1. where and how do i create filter to restrict countries? In source or target? Should I include some kind of filter operator in interface.
You need to have the Filter on the Source side so that we can filter records accordingly the capture the same in the File. To have a Filter . In the source data store click and drag the column outside the data store and you will have Cone shaped icon and now you can click and type the Filter.
Please look into this link for ODI Documentation -http://www.oracle.com/technetwork/middleware/data-integrator/documentation/index.html
Also look into this Getting started guide - http://download.oracle.com/docs/cd/E15985_01/doc.10136/getstart/GSETL.pdf . You can find information as how to create Filter in this guide.
2. If I have include multipe countries like (USA,CANADA,UK) to go to one file and rest to another file; Can I use some kind of lookup file...? Instead of modifying filter inside interface...Can i Update entries in the file?
there are two ways of handling your situation.
Solution 1.
1. Create Variable Country_Variable
2. Create a Filter in the Source datastore in the First Interface ( SOURCE.COLUMN = #Country_Variable)
3. Create a new Package Country File Unload
4. Call the Variable in Country_Variable in Set Mode and provide the Country (USA )
5. Next call the First Interface
6. Next call the Second Interface where the Filter condition will be ( SOURCE.COLUMN ! = #Country_Variable )
7. Now run the package .
Solution 2.
If you need a solution to handle through Filer.
1. Use this Method (http://odiexperts.com/how-to-refresh-odi-variables-from-file-%E2%80%93-part-1-%E2%80%93-just-one-value ) to call the File where you wish to create store the country name into the variable Country_Variable
2. Pretty much the same Create a Filter in the Source datastore in the First Interface ( SOURCE.COLUMN = #Country_Variable)
3.Create a new Package Country File Unload
4.Next call the Second Interface where the Filter condition will be ( SOURCE.COLUMN ! = #Country_Variable )
5. Now run the package .
Now through this way using File you can control the File.
Please try and let us know , if you need any other help.

Help needed with SQL to split huge data into two excel or text files.

Hi,
I have a table which has around 1850000 records. I want to split the data into two sets and import the data in .txt or execl file.
How can i break upthe records using rownum or any thing
select * from tablename where rownum<940000 fetched some records
but
when i gave select * from tablename where rownum>940000 it was not fetching records.
Guideme

when i gave select * from tablename where rownum>940000 it was not fetching records.try this
select * from (select tablename.*, rownum rn from tablename) where rn >940000

I want to SPLIT A CLIP. That's all. Make one piece into two.

I am looking for the equivalent of the 'Command-T' function in iMovie HD. This is one of the most commonly used actions in processing video, and apparently it doesn't exist. The 'Split Clip' command in iMovie 09 simply does not work for me. At all. EVER. I have yet to find an instance where it isn't grayed out. All I want to do is split a clip, and add a transition between the two.
While I'm on my soap box, the revisions of iMovie since V.6 are without a doubt the most counter-intuitive, joy-sucking applications ever produced by Apple. iMovie made it FUN to edit video; these last two versions make it frustrating and cumbersome.
To reiterate, I want to SPLIT A CLIP INTO TWO PIECES. If anyone here can provide instructions for doing so (as opposed to explaining why it is NOT possible), then kindly do so. Thank you.

Trey, I seriously feel your pain. I'm editing a wedding project in IM '09 and it is literally taking me twice as long to complete the project than it would have in HD. You should be able to make splits in the event browsers, but that's too much like common sense for Apple. They completely mucked up the editing process by doing away with iMovie HD, which by the way is not working well in Snow Leopard.
As for split, I suggest the same thing as above. Put the playhead where you want the split. Us shortcut key, ShiftCommandS. I had problems with it this morning, but it finally kicked in.
I also had a problem when trying delete a selection of a clip. When I clicked delete, it deleted the selection plus the extracted audio of the entire clip from which I took the selection. Not sure what caused that.
I have FCE installed, so maybe I’ll haul it out and try using it for my next project. IM '09 is a pain. I'm not even sure how it's more accessible to general users.

How can I split a class into 2 files?

I converted a C++ program to Java recently and it works fine, but I ran into a problem.
One file is very large and I need to add more functionality. Unlike with C++ where you can just put new functions in another file, I don't see a way to do it in Java.
I made another file, and therefore another class, but the compiler complains that it can't call a static function from non-static context. (I did not declare it static so I guess it's assuming it) But I understand why. So I made the new class "extend" the old one so "this" would exist but that doesn't work -- Is it because the new class is a subclass of the original class?
There must be a way to do this. But I don't see what is likely obvious. HELP! And thanks.

JavaIsBetterThanCPP wrote:
There must be a way to do this. But I don't see what is likely obvious. HELP! And thanks.Unfortunately Java has no concept of "partial classes" like C# has. Generally, however, a class that is large enough to split up into separate files is either one class that should be modularized further into separate classes, or it already is modularized and all that code is the result of many inner classes. What some people do is promote those inner classes to top-level members in their own file, and mark them as package-private. Using a package you can basically have two classes that know everything about each other and have full access to each other.
But personally, and until I see justification otherwise, semantics in Java being unbreakingly tied to a certain file structure and naming is the most bonehead and, frankly, non-Java thing about Java.
There's probably a pre-processor out there that will let you split a class into multiple files and will combine them into a single source file just-in-time to pass to the compiler.

Ask split long text into two line into same cell for ALV

Dear All,
Is it possible split long text into two line into same cell for ALV display data?
Regards,
Luke
Moderator message: please search for information before asking.
Edited by: Thomas Zloch on Feb 24, 2011 10:12 AM

Keep options: Select the paragraph, then CtrlAltK (Mac: CmdOptK, I
think).
If you want the paragraphs in pairs, create two paragraph styles. Style
A has keep options set to start on a new page, and also, its Next Style
is style B.
Style B has no keep options, but it's Next Style is Style A.
Select all the text.
From the flyout menu of the paragraph styles palette, apply Style A
"then next style."
Now all paragraphs will be alternating -- style A, style B, style A, etc.
Now do what I wrote initially, and you'll have pairs of paragraph in
separate text frames.

Splitting one message into two files

Similar Messages

Maybe you are looking for