Splitting single idoc into multiple xml's

Hello,
My requirement is such that, i need to split an custom IDoc into three xml which will be picked up by MDM, as i am new to PI 7.1 kindly guide me through the process.
and the second requirement is, i need to map the same custom IDoc into three different MDM repositories pls guide me through the process

Hi Abhishek,
[quote]My requirement is such that, i need to split an custom IDoc into three xml which will be picked up by MDM, as i am new to PI 7.1 kindly guide me through the process
For this, you have to go for multimapping.
The links for it are already provided in the above posts.
and the second requirement is, i need to map the same custom IDoc into three different MDM repositories pls guide me through the process
Can you please explain this requirement further?
-Supriya.

Similar Messages

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

Split the IDOC into multiple IDOC if the IDOC has more than 500 records

Hi All,
I developed an outbound IDOC in which we are facing an issue.
There is some limitation on the maximum idoc size it can handle.
If number of records is more than 500, split the idoc into multiple iDoc's, e.g. if it would have 1300 records , the result would be 2 iDoc's with 500 records, and the last one would have 300 records
How can i acheive this.
Regards
Jai

Hi,
1) first you need to know which message type/Idoc type you are triggering.
2) Get the Corresponding processcode from Partner profiles(WE20/ WE41).
3) Then the look for prper user-exit in the related processing FM.
4) write logic to split the IDoc accordingly.
if no proper user exit available then copy the standard processing FM and need to all ALE related configurations.
Catch hold any ABAP expert in your team to do all these.
Suresh

How to Split Single Idoc into 2 files and put some delay

Hi,
I have a IDoc to file Scenario. Invoice Idoc to Flat file scenario
this is a reuse Interface
Current Scenario we have graphical mapping(used for lookup and dynamic filename, mostly all the field mappings are 1-1) and ABAP Mapping to convert Idoc to flat file, 1 Idoc will generate 1 file.
In addition to the above case, there is 1 more requirement
Correction Invoice case. where in I get single Idoc with Multiple Item categories (Original data and Correction data)
In this case always I need to send two files(2 Idoc data), first Idoc is for Original Idoc and 2nd is Corrected Invoice, these 2 idocs should be sent with some delay.
In Correction Invoice case, I should generate 2 idocs based on Item category (PSTVY) value.
Suppose I have 4 E1EDP01 segments out of which PSTVY has value "AA" and "BB" repeated twice as shown below
<PSTYV>AA</PSTYV>
<PSTYV>AA</PSTYV>
<PSTYV>BB</PSTYV>
<PSTYV>BB</PSTYV>
So I need to generate 2 Idoc 1 for AA and other for BB.
If there is no correction Invoice, 1 idoc for 1 file will be generated.
Am planning to use BPM to delay the idocs and identigy bpm based on Document type else no bpm...
How do I split the mapping of single Idoc to 2 files based on Item category.
Thanks,
Varun

You can use the multi-mapping to split the message payloads according to business requirement (AA and BB segments values)
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
And then send to different receivers by adding the conditions on the Receiver Determination (for example, "field = AA" go to Receiver1, and "field = BB" to to Receiver2).
http://help.sap.com/saphelp_nwpi71/helpdata/en/26/5ccd3bb4560f01e10000000a11402f/frameset.htm
Or even Extended (enhanced) receiver determination, should the scenario be more complex:
http://wiki.sdn.sap.com/wiki/display/XI/EnhancedReceiverDeterminationinSAP+XI

Splitting single video into multiple files - workflow improvements?

I regularly need to split a single video into multiple separate files that are used by other programs. I'm using Premiere Pro CS4 for a number of reasons including the ability to easily and accurately select a scene by individual frames, native audio and video effects/filters, and the ability to import and export various video types. I'm open to using other tools, but I haven't yet found one that is even close to Premiere Pro when it comes to accurately selecting split points.
I'm not a Premiere Pro expert. I have been doing this for about four months and have read many resources (books, forum posts, help guides) to refine the workflow I'm currently using. My question: does anyone know any improvements that might save me time/keystrokes.
Current workflow:
I've bound F8 to File > Export > Media
Import video file
Open in source monitor
Set In and Out points for scene in source monitor
Ctrl-drag from source monitor to Project Panel (creates a subclip)
Repeat 3 and 4 for all scenes/subclips
Select all subclips from Project Panel and drag to timeline
Set work area bar to first subclip in timeline by the following four keystrokes: Home, Alt-[, PageDown, Alt-]
Type F8 (File > Export > Media shortcut). Type output file name, click OK and the first subclip is put in the AME queue
For the remaining subclips, type: Alt-[, PageDown, Alt-], F8, output file name, OK and repeat until done
Any thoughts/ideas on workflow improvements?
Thank you!

Thank you Hunt.
For the sake of brevity, I didn't include all of the details about the various aspects of the projects.
Early on I was doing what you suggested and yes, it is a little quicker. I learned (painfully) a couple of months later that I sometimes have to go back and adjust the clips and this method (trim to timeline with no subclips) resulted in quite a bit of duplicate effort (to reobtain start/stop points). I've since learned that managing the "scenes" as subclips in topical bins allows me to go back and make adjustments, long after I've totally forgotten about the project content, without a lot of unnecessary reworking.

Split single row into multiple rows containing time periods

Hi,
I have a table with rows like this:
id, intime, outtime
1, 2010-01-01 00:10, 2010-01-3 20:00
I would like to split this row into multiple rows, 1 for each 24hr period in the record.
i.e. The above should translate into:
id, starttime, endtime, period
1, 2010-01-01 00:10, 2010-01-02 00:10, 1
1, 2010-01-02 00:10, 2010-01-03 00:10, 2
1, 2010-01-03 00:10, 2010-01-03 20:00, 3
The first starttime should be the intime and the last endtime should be the outtime.
Is there a way to do this without hard-coding the 24hr periods?
Thanks,
Dan Scott
http://danieljamesscott.org

Thanks for all the feedback, Dan.
It appears that the respective solutions provided will give you: a) different resultsets and b) different performance.
Regarding your 'truly desired resultset' you haven't answered all questions from my previous post (there are differences in the provided examples), but anyway:
I found that using CEIL or ROUND makes quite a difference, using my 'simple 3 record testset' (30 records vs. 66 records got initially returned, that's less than half of the original). That's quite a difference. However, I must call it a day (since it's almost midnight) for now, so there's room for more optimizement and I haven't thoroughly tested.
But this might hopefully make a difference performancewise when compared to my previous 'dreaded example':
SQL> drop table t;
Table dropped.
SQL> create table t as
2 select 1 id, to_date('2010-01-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-01-03 20:00', 'yyyy-mm-dd hh24:mi') outtime from dual union all
3 select 2 id, to_date('2010-02-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-02-05 20:00', 'yyyy-mm-dd hh24:mi') outtime from dual union all
4 select 3 id, to_date('2010-03-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-03-03 00:10', 'yyyy-mm-dd hh24:mi') outtime from dual;
Table created.
SQL> select id
2 ,      max(intime)+level-1 starttime
3 ,      case
4           when level = to_char(max(t.outtime), 'dd')
5           then max(t.outtime)
6           else max(t.intime)+level
7         end outtime
8 ,      level period
9 from   t
10 connect by level <= round(outtime-intime)
11 group by id, level
12 order by 1,2;
        ID STARTTIME           OUTTIME                 PERIOD
         1 01-01-2010 00:10:00 02-01-2010 00:10:00          1
         1 02-01-2010 00:10:00 03-01-2010 00:10:00          2
         1 03-01-2010 00:10:00 03-01-2010 20:00:00          3
         2 01-02-2010 00:10:00 02-02-2010 00:10:00          1
         2 02-02-2010 00:10:00 03-02-2010 00:10:00          2
         2 03-02-2010 00:10:00 04-02-2010 00:10:00          3
         2 04-02-2010 00:10:00 05-02-2010 00:10:00          4
         2 05-02-2010 00:10:00 05-02-2010 20:00:00          5
         3 01-03-2010 00:10:00 02-03-2010 00:10:00          1
         3 02-03-2010 00:10:00 03-03-2010 00:10:00          2
10 rows selected.
SQL> By the way: I'm assuming you're on 10g, is that correct?
Can you give us some information regarding the indexes present on your table?

Split single transaction into multiple PDFs

I have a single XML file that contains a form that overflows multiple times. I want each form to be treated as a separate transaction (i.e. I want each form to generate a separate pdf).
From the FSISYS:
< ExtractKeyField >
SearchMask = 1,<Wrapper
I want each of these Address Changes to result in a separate PDF.
<Wrapper>
<ProducerConfirmations beginTime="0001-01-01T00:00:00" endTime="0001-01-01T00:00:00" emailChange="true" nyFlag="NA">
<AddressChange previousAddressId="ResidentAddr_Old" addressId="ResidentAddr" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="Residential" />
<AddressChange previousAddressId="BusAddr1_Old" addressId="BusAddr1" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="BusinessAddress1" />
<AddressChange previousAddressId="BusAddr2_Old" addressId="BusAddr2" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="BusinessAddress2" />
<AddressChange previousAddressId="BusAddr3_Old" addressId="BusAddr3" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="BusinessAddress3" />
<AddressChange previousAddressId="BusAddr4_Old" addressId="BusAddr4" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="BusinessAddress4" />
</ProducerConfirmations>
</Wraper>
Any way I can force the PDF print driver to produce each page as a separate file?
Muchas gracias,
Dave

You'd need to use class recipients and make this node the address field. There is not an other way to split at the transaction level.

Split single column into multiple column using sql /plsql

create table test (name varchar2(255);
insert into test values('DH RED 20 12/10 10 2 ');
insert into test values('PM STUD 20 15/10 20 29.55' );
insert into test values('LS MENTHOl FILTER ASC 18/70 60 240.66');
insert into test values('WINSTON WHITE CLASSIC 13    18/70 60 240.66');
My Output should be like as below in other table :
create table test_result (brand varchar2(255),packet   varchar2(50),amount varchar2(25),total varchar2(25));
BRAND                                   PACKET       AMOUNT           TOTAL
DH RED 20                            12/10            10              2
PM STUD 20                           15/10            20              29.55
LS MENTHOl FILTER ASC               18/70            60              240.66
WINSTON WHITE CLASSIC 13             18/70            60              240.66can you please help me to solve this issue
thanks in advance
Edited by: A on Apr 21, 2012 11:33 PM
Edited by: A on Apr 21, 2012 11:34 PM
Edited by: A on Apr 21, 2012 11:34 PM

h4. # Database should be 10g. If version is below 10g query need to be modified as per string format.
h4. # Split string into two parts by '/'. First part contain brand + packet(1), Second part contain packet(2) + amount + total
h4. # Your brand name can be of any length.
String Format* : <Brand Name><space><packet(1)>/<packet(2)><space><amount><space><total>
SELECT name,
       REGEXP_SUBSTR(first_part,'.+[[:space:]]',1,1) brand,
       REGEXP_SUBSTR(first_part,'[^[:space:]]+/',1,1) || REGEXP_SUBSTR(second_part,'[^[:space:]]+[[:space:]]',1,1) packet,
       REGEXP_SUBSTR(second_part,'[^[:space:]]+[[:space:]]',1,2) amount,
       REGEXP_SUBSTR(second_part,'[^[:space:]]+$',1) total
FROM
(SELECT trim(name) name,
          trim(substr(name,1, instr(name,'/'))) first_part,
          trim(substr(name,instr(name,'/')+1)) second_part
   FROM test )
{code}

Audio sync problem as soon as iMovie splits single DV into multiple MOV

The original DV has perfect audio sync. When I split a clip (e.g. delete some frames), iMovie splits the files and changes to .MOV. The audio is now out of sync.
Anyone else see this? Any work arounds?
Thanks -- Sophie

Hi
Error -41 mFulErr Memory full (open) or file won't fit (load)
So if You've really got 40Gb free space on Start-Up (Mac OS) hard disk - Others DO NOT count as neither iDVD or Mac OS can use space there for it's temp files.
Then I would close down Mac even disconnect Mains - Then re-start it and see if it got's it's memory right.
Else
• Audio from iTunes - use to give me problems - so I do - in iTunes
• collect the needed audio into a new PlayList
• Burn this out as an Audio-CD (.aiff) - NOT .mp3
• Use thge files on this CD in movie projects
Works for me.
Yours Bengt W

How to Split Single Outbound Idoc into Multiples

Hi guys
Hope you all are doing good.
Can you please let me know , How to Split Single Outbound IDOC into multiples.
I am looking for some sought of configuration in IDOC/from SHIPMENT Configuration level. Because this needs to be implemented for Shipment IDOCS. Please let me know if this can be done through configurations apart from implementing User exit or copying the outbound shipment function module.
Awaiting for your valuable replies.
Best Regards
Shiva

Hello,
1. Routes
2. Packaging used
3. Shipment Type
Regards
Waza

How can I split an Orders05 iDoc into multiple iDocs?

Hello,
Can one of you experts please tell me how I can split an ORDERS05 iDoc into multiple iDocs based upon Delivery addresses?
For example, if the iDoc contains 3 different Delivery Addresses then I need to split it into 3 iDocs.
It has been suggested to me that I can Create a custom function module. In this custom fm split the idoc into 3 based on the delivery address and create it using the FM MASTER_IDOC_DISTRIBUTE.
Problem is I don't know how to do this. Any help is greatly appreciated. Thanks.
Dan

Hi Dan Avis
Write a Custom Z program .
1 get order05 idoc number....
2 get the segment details...(Based on you condition...)
3 In a loop send the data to the FM MASTER_IDOC_DISTRIBUTE (Based on you condition...)
4 IDOC will generated,,,every loop and
5 Change the status of original idoc .
or
Create Function module and use the FM as process code to create 3 idocs...and processs...new generated idoc and block original idocs...
Call me if you have questions @ 302 290 5677
Thanks
Ramesh

Splitting of a CSV File with Multiple Records into Multiple XML File

Dear All,
<b> I am doing a Scenario of CSV to XML Files. I am using BPM for the same. My incoming CSV File has got multiple records. I want to break this Multiple records into Multiple XML Files having one record each.</b>
Can someone suggest how can I break this rather Split this into Multiple XML Files.
Is Multimapping absoltely necesaary for this. Can't we do this without Multimapping. Can we have some workaround in the FCC parameters that we use in the Integration Directory.
Kindly reply ASAP. Thanks a lot to all in anticipation.
Pls Help.
Best Regards
Chakra and Somnath

Dear All,
I am trying to do the Multimapping, and have 0....unbounded also. Someways it is not working.
<b>
Smitha please tell me one thing...Assigning the Recordsets per Message to 1, does it mean that it will write multiple XML Files as I want.</b>
Also I am usinf Set to Read only. So once the File is read it becomes RA from A. Then will it write the other Records.
I have to use a BPM because there are certain dependencies that are there for the entire Process Flow. I cannot do without a BPM.
Awaiting a reply. Thanks a lot in anticipation.
Best Regards
Chakra and Somnath

Split single row in multiple rows based on date range

I need sql script that can split single row in multiple rows based on start date and end date column in table.
Thank you

I agree to your suggestion of having a dates table permanently in the database. Thats how we also do for most of our projects as well
But in most projects the ownership of table creation etc lies with the client as they will be the DBAs and will be design approval authorities. What I've seen is the fact that though
many of them are in favour of having calendar table they dont generally prefer having a permanent table for numbers in the db. The best that they would agree is for creating a UDF which will have
tally table functionality built into it based on a number range and can be used in cases where we need to multiply records as above.
Wherever we have the freedom of doing design then I would also prefer creating it as a permanent table with required indexes as you suggested.
>> many of them are in favour of having calendar table they dont generally prefer having a permanent table
Those people do not understand about database and are not DBAs :-)
It is our job to tell them what is right or wrong.
** This is a real story! I had a client several years back, who was the CEO of a software company.
He use the query:
select * from table_name
In order to get the last ID!
The table_name was actually a view that took data from several tables, and the main table that he wanted to get the ID included several string columns, with lot of data!
he actually pulled all this data to the application, just to get the lat ID in a specific table!
It is our job as Consultants or DBAs to fix's his misunderstanding :-)
Ronen Ariely
[Personal Site] [Blog] [Facebook]

HR - XI - External System: one IDOC to multiple XML Files

Hi,
I have a scenario where I need, out of one HRMD_A07 IDOC send multiple XML files:
The IDOC and the XML files can the Master data for many employee (IDOC has max of 200 as of SAP, external system, max of 1000).
The IDOC will be generated with change pointers with all the needed filters (I can add/remove if needed).
My goal is to generate 3 types of XML files:
- 1 for the persons (containing basic info like name, firstname, persnr,etc)
- 1 for the various unit (with basic info of unit like number, description & name)
- 1 for the links between persons and units (this person is linked with that unit)
The structures of the 3 XML files are know and can be imported via XSD definition.
Do I need to use BPM for doing so or is there a way to do that with simple mapping?
If BPM is needed, as I new to that, if you have a link to a begginer guide, fell free to send it
Cheers,
greg

hi,
For your scenario there is no need of BPM.
In message mapping select the message tag.
In the target add 3 message types.
Just map the fields.Go to Interface mapping add the 3 message in the target.
Get the mapping.
In ID sender agreement,Receiver Determination is same.
In Interface Determination select extended.Get the mapping.
Create 3 Receiver agreement for each Receiver.
Regards,
Prakasu

Split one IDoc into two IDocs ?

hello all,
I wanna split one IDoc into two IDocs in XI?
how can implement it?
plx give some suggestions.
thx in advance
best regards
Yaning
Message was edited by:
Yaning Liu

Yaning,
Please find the below blog for changing the ocurrences of IDOC
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Best regards,
raj.

Splitting single idoc into multiple xml's

Similar Messages

Maybe you are looking for