Spltting number passed in from main

Hi, my program is supposed to get a number and store it in input. Input is then passed into numberisValid function. I would like to be able to split the number into single digits to do some mathematical calculations. For example if the user enters 123 it would be split into 1 2 3. How would i do this the simplest way. The only way i can think of is by storing it in an array but how would i divide the input variable?
import java.util.*; // for the Scanner class
public class CCValidator
    public static void main (String [] args)
        Scanner sc = new Scanner(System.in);
        System.out.print("Please enter a number to validate: ");
        long input = sc.nextLong();
        boolean isValid = numberIsValid(input);
        System.out.print("This credit card number ");
        if (isValid)
            System.out.print("is ");
        else
            System.out.print("is NOT ");
        System.out.println("valid.\n");
    public static boolean numberIsValid (long num)
}

Here's a method that will split an int into an array of integers.
public int[] splitDigits(int num) {
    int[] array = new int[String.valueOf(num).length()];
    for (int i = array.length - 1; i >= 0; i--) {
        array[i] = num % 10;
        num /= 10;
    return array;
}

Similar Messages

  • Passing values from main report to sub-reports

    - How do we pass values from main report to sub-report?

    Look at this link which shows how to pass values from a subreport to a main report.
    http://www.datamanagementgroup.com/resources/trainerstalk/trainerstalk_howto_share_subreport_data_with_main_report.asp
    You can use the same method to pass values from main report to a subreport.
    1) Create a formula @mainFormula in the main report, as given in item 1 of link.
    2) Place this formulla in a suppressed report footer section above the target subreport.
    3) In the subreport, create a formula @subFormula that declares the same variable name, as given in item 3 of link.
    4) Place @subFormula column in the subreport where you want to display it.

  • Pass parameter from main report to sub report?

    Post Author: nomore
    CA Forum: General
    I have a report which is comparing turnover from present year to previous year.Im trying to make it dynamic - so i have added a parameter to the main report to allow user to enter a year, however I cannot work out how to pass this to the sub report so select records based on this. I have passed the data thruogh a fomula ok (WhilePrintingRecords; Shared NumberVar shYear;)  and that is working spot on.Now i just need to enter that number as a record select paremeter. Also if I try to perform a summary on this field (it never changes, but its just a test) - the 'Insert Summary' option is unavailable, and it doesnt show up as a formula in formula editor.  

    Post Author: V361
    CA Forum: General
    I have CR XI, you want to edit your subreport links, right click the sub, select Change subreport links, you should be able to select your field, and see your parameter listed.  Once you set up the link the sub will run based on whatever link you picked.

  • How to pass values from main window to pop-up window?

    I want to pass a value from the main window (1st form) to pop-up window (2nd form). The first form is of name booking.jsp and 2nd form is of name Fund_booking.jsp. I am using window.showModalDialog to open the window. I think, I have written right code in main window to pass the value but even then I am not able to get it on pop-up window. I am not even able to display an alert on pop-up window saying "hi" by writing a function on save Button in pop-up window. The code is as follows:
    On booking.jsp:
    <script>
    function popup()
    var aForm;
    aForm = D_requisition_id.options[D_requisition_id.selectedIndex].text;
    \\Here I have captured value from a drop down box in my main window form and assigned it to the variable.
    alert(aForm);
    var myObject =new Object();
    myObject.Brandcode = aForm;
    alert(myObject.Brandcode);
    window.showModalDialog("Fund_booking.jsp",myObject,"dialogHeight:400px;dialogWidth:420px;");
    </script>
    <button name="B_FundBooking" tabIndex=4 style='POSITION:absolute;LEFT:393;TOP:292;WIDTH:100;height:24;BACKGROUND-COLOR:buttonface' onClick ="popup()">Fund Booking</button>
    On Fund_booking.jsp:
    <SCRIPT>
    var oMyObject = window.dialogArguments;
    var sBrandcode = oMyObject.Brandcode;
    alert(sBrandcode);
    </SCRIPT>
    Even the following alert is not getting displayed in pop-up window;
    <script>
    function ValidateData()
    alert("Hi");
    </script>
    <button name="B_Save" tabIndex=1 style='POSITION:absolute;LEFT:255;TOP:315;WIDTH:75;height:24;BACKGROUND-COLOR:buttonface' onClick ="ValidateData()">Save</button>
    I am using DIV instead of frames in my both forms. I just want to get that value in my pop-up window to write a query based on which data will get displayed in my table of pop-up window.
    Plz help me to solve this problem.

    Well, this is actually a JavaScript question, not a Java question but I can give some hints.
    When you do pop-up windows you need to put JavaScript in the html of the pop-up itself. Data can be passed by creating new fields in the window object, which the popup can access via the window.openner field.
    So, before invoking the popup add any data to be passed to the window object, then the onLoad function in the popup grabs the data.

  • How to pass value from main window to pop up window?

    I want to pass a value from the main window (1st form) to pop-up window (2nd form). The first form is of name booking.jsp and 2nd form is of name Fund_booking.jsp. I am using window.showModalDialog to open the window. I think, I have written right code in main window to pass the value but even then I am not able to get it on pop-up window. I am not even able to display an alert on pop-up window saying "hi" by writing a function on save Button in pop-up window. The code is as follows:
    On booking.jsp:
    <script>
    function popup()
    var aForm;
    aForm = D_requisition_id.options[D_requisition_id.selectedIndex].text;
    \\Here I have captured value from a drop down box in my main window form and assigned it to the variable.
    alert(aForm);
    var myObject =new Object();
    myObject.Brandcode = aForm;
    alert(myObject.Brandcode);
    window.showModalDialog("Fund_booking.jsp",myObject,"dialogHeight:400px;dialogWidth:420px;");
    </script>
    <button name="B_FundBooking" tabIndex=4 style='POSITION:absolute;LEFT:393;TOP:292;WIDTH:100;height:24;BACKGROUND-COLOR:buttonface' onClick ="popup()">Fund Booking</button>
    On Fund_booking.jsp:
    <SCRIPT>
    var oMyObject = window.dialogArguments;
    var sBrandcode = oMyObject.Brandcode;
    alert(sBrandcode);
    </SCRIPT>
    Even the following alert is not getting displayed in pop-up window;
    <script>
    function ValidateData()
    alert("Hi");
    </script>
    <button name="B_Save" tabIndex=1 style='POSITION:absolute;LEFT:255;TOP:315;WIDTH:75;height:24;BACKGROUND-COLOR:buttonface' onClick ="ValidateData()">Save</button>
    I am using DIV instead of frames in my both forms. I just want to get that value in my pop-up window to write a query based on which data will get displayed in my table of pop-up window.
    Plz help me to solve this problem.

    just attach the value with its url for example
    String names="java";
    <a href="# onclick="window.open('file.jsp?name='+names);"></a>

  • Pass data from Main report to Subreport

    I have client name in Main Report. I need to display the same name into Subreport. How can I pass the value from MainReport to SubReport.

    Hi Mahendra,
    Drag the subreport control from toolbox,
    Go to the subreport properties by right click on the subreport.
    In General property add the child report.
    In parameter property , add parameter,in Name dropdown will show the parameters already created in the child report.
    In Value column which is fron of Name, you can give values which are avilable in Main report.
    You can see below screen for better understanding.
    Thanks
    Prasad

  • Correct Way to Pass Data from Main VI to Sub VI

    I'm currently working on a program that consists of a main VI which passes in several inputs to numerous copies of the same subVI which are displayed in subpanels. As you may know, in order to display a subVI in a subpanel, a reference to the subVI must be passed into the "Insert VI" property node of the subpanel. However, I am unsure as to what is the proper way in which I can generate this reference from the subVI block on the block diagram of the main VI. Note that in my case, it is insufficient to simply generate a reference to the subVI by pointing to the file path of the subVI and opening an instance of it, because that instance of the subVI must also receive input from the main VI. Generating a reference in this way does not, as far as I know, allow the main VI to interface with the subVI.
    I had thought that I developed a solution to this problem by extracting a reference to the current instance of the subVI from the "Owning VI" property node of any control or display in the subVI. This works well for about 12 hours of program execution. However, after that point, the program starts highlighting the "Insert VI" property node every time the subVI is updated. Furthermore, the main VI seems to often lose the reference to the subVI and becomes unable to start, especially after the subVI has been edited. Given these two problems, this solution clearly is not a proper solution.
    Could anybody advise on how to properly generate a reference to an instance of a subVI that receives input from a main VI?
    Any suggestions would be appreciated.

    Griffon2-6 wrote:
    I've figured that out too - set the "Option" input on the "Open VI Reference" block to 0x8.  
    Great!
    Thats the way to go. Keep digging around and you will find solutions in the LabVIEW Help or on the forums for most of the things.
    When you set the open VI reference option to 0x08, you can obtain reference to different instances of the same VI, so that you can pass different data and let them run separately.
    Griffon2-6 wrote:
    However, now I've discovered that the inputs from the main VI are not being passed to the subVI instances as the program is running. Does passing control values via invoke nodes allow for real-time data transfer?
    I have one question. You said you are calling this sub VI in a sub panel? How many subpanels do you have and why are you calling the reentrant vi in differnet sub panels?
    Could you post your code?
    (If a post helped you sove the problem, mark it as solution. That will help us identify and track the solutions for different issues.)

  • Passing Parameter from Main report to SQL command-based subreport

    I am trying to cut down the run time of my reports and have recently figured out how to write SQL commands to limit the data by filtering prior to being pulled into the reports.  However, many of my reports rely on multiple sub reports, which can cause a dramatic 'drag' on the report.
    I am trying to filter the SQL command used in my sub report by passing the group parameter, which is selected by the user in the main report, to the sub report's SQL command.  Without this parameter, the sub report has to sort through a lot more data than it would with this parameter, making the run time extremely slow.
    Any suggestions on how I can accomplish this?
    Thanks for any help you can provide,
    Marlene Allen
    Crystal Reports Developer
    Crystal Reports Professional;
    Product Type: Full;
    Product Version 11.5

    Hi Marlene,
    I don't believe you can pass a CR parameter to a Command object.
    I suggest replacing all of the Command Objects with a Stored Procedure so all of the data filtering is done server side. DB servers are much more proficient at collecting the data and filtering than CR will ever be. It will also allow you to replace subreports to also speed up your report processing. All depends on your layout of course but something to look at.
    Thank you
    Don

  • Pass Parameter from main page to include page (subview) and read it ?

    Hello All
    i have an include header.jsp page in main page.jsp ,and i included it by subview.
    i want to pass a parameter ex(screen name) to the subview by using f:param.
    Here is the code in main.jsp:
    <f:subview id="headerSubView">
    <jsp:include page="/commons/header.jsp" flush="true">
    <jsp:param name="screenTitleByJspParam" value="screen2007"/>
    </jsp:include>
    <f:param name="screenTitleByFparam" value="screen2007"/></f:subview>
    Code in header.jsp
    1- <af:outputFormatted value="#{param.screenTitleByJspParam}"/> -- this dose not work
    2- <af:outputFormatted value="#{param.screenTitleByFparam}"/> -- this dose not work (i want this manner)
    So how i can send parameter by ]<f:param and read it by subview uesing adf/jsf tags ?
    Regards
    Mohd.Weshah
    weshah79

    Dear thanassis
    Thanks for you help ,your code is working successfully but my case is the following :
    same your main jsp page but the subview tag in table :
    <%@ page contentType="text/html;charset=windows-1256"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
    <%@ taglib uri="http://xmlns.oracle.com/adf/faces" prefix="af"%>
    <%@ taglib uri="http://xmlns.oracle.com/adf/faces/html" prefix="afh"%>
    <f:view>
    <html>
    <head>
    <meta http-equiv="Content-Type"
    content="text/html; charset=windows-1256"/>
    <title>main</title>
    </head>
    <body>
    <h:form>
    <afh:tableLayout>
    <afh:rowLayout>
    <afh:cellFormat>
    <f:subview id="header">
    <jsp:include page="header.jsp" flush="true">
    <jsp:param name="pageTitle" value="Modify aa record"/>
    </jsp:include>
    <f:subview>
    </afh:cellFormat>
    </afh:rowLayout>
    </afh:tableLayout> </h:form>
    </body>
    </html>
    </f:view>
    try it the parameter dose not work ,but if you want that code work successfully move the subview out of the table.
    Do you know what is the problem ?
    i want give you another hint maybe it is realted to the same problem, which is in my original page the body tag is adf tag ie(<afh:body>) your code dose not work with that tag until i changed the afh:body to html body.
    Regards
    Mohd.Weshah

  • How to pass data from main vi/exe (sender) to many vi/exe (receivers) with one receiver code/vi?

    Hello all
    I am tring to dev some data distribution system, where one vi gets data from hw to shared variable. Vi compiled to app "sender.exe" The others units (receivers) should receive that data from shared var and write it to different serial ports (configured by user in runtime via control). Number of actually working ports may vary.
    Should (and can?) this "receivers" vi's be the one vi, compiled to app "receiver.exe" and executed many times with different settings (diff serial port number)? // I tried this, second+ execution of receiver.exe just makes existing window active instead of creating new process as it works with other languages.
    Or should i build many different vi (receiver1, receiver2, ... with actually the same content) into different .exe to run them at the same time?
    Or may be the best way to build multi-port receiver with ability to communicate with any number of serial ports? // i dont like this, no code reusage here ))
    The question is complicated with possibility to work via network (one of the reasons to make different exe for receivers) and may be the shared vi namespace may not allow many receiver-side vi's to have the same name?
    In short, it should work as SENDER.exe >> RECEIVER1.exe, 2, 3... i.e. "one to many".
    Asking for a best solution advice.
    Please help)

    ns_create wrote:
    Should (and can?) this "receivers" vi's be the one vi, compiled to app "receiver.exe" and executed many times with different settings (diff serial port number)? // I tried this, second+ execution of receiver.exe just makes existing window active instead of creating new process as it works with other languages.
    To allow multiple instances of the same exe, read this.
    (I don't fully understand your setup, so I won't comment further at this time.)
    LabVIEW Champion . Do more with less code and in less time .

  • Please help: How to pass variable from main select to subquery

    I have a table with four columns (id, status, start_date and end_date) as follows. What I want is to get the difference between the statuses' start_date to find out how long it takes for the ID to change status. Basically getting the difference of the Start_dates of the statuses for the ID.
    ID         Status               Start_date          End_date
    1         NEW             02-FEB-07        02-FEB-07
    1         OLD             04-FEB-07        06-FEB-07
    1         BAD             09-FEB-07        14-FEB-07
    I had initially thought of doing this
    SELECT ID, (SELECT Start_date from tbl where Status = 'OLD' and ID = 1) - (SELECT Start_date from tbl WHERE Status = 'NEW' and ID =1) from tbl where ID = 1
    but that would not work since I have more than one id and implementing inside Java will be complicated. Please help me what I need to do .. Thank you

    Or this:
    SQL> CREATE TABLE t AS (SELECT 1 ID , 'NEW' status, '02-FEB-07' start_date, '02-FEB-07' end_date FROM DUAL
    UNION ALL SELECT 1 ID , 'OLD' status, '04-FEB-07' start_date, '06-FEB-07' end_date FROM DUAL
    UNION ALL SELECT 1 ID , 'BAD' status, '09-FEB-07' start_date, '14-FEB-07' end_date FROM DUAL
    UNION ALL SELECT 2 ID , 'NEW' status, '02-FEB-07' start_date, '02-FEB-07' end_date FROM DUAL
    UNION ALL SELECT 2 ID , 'BAD' status, '05-FEB-07' start_date, '10-FEB-07' end_date FROM DUAL
    UNION ALL SELECT 2 ID , 'OLD' status, '07-FEB-07' start_date, '10-FEB-07' end_date FROM DUAL
    Table created.
    SQL> ALTER SESSION SET nls_date_format='DD-MON-RR'
    Session altered.
    SQL> SELECT ID,
           status,
           start_date,
           TO_DATE (start_date)
           - LAG (TO_DATE (start_date)) OVER (PARTITION BY ID ORDER BY TO_DATE
                                                                       (start_date))
                                                               diff_of_start_days
      FROM t
                                                    ID STA START_DAT                                 DIFF_OF_START_DAYS
                                                     1 NEW 02-FEB-07                                                  
                                                     1 OLD 04-FEB-07                                                  2
                                                     1 BAD 09-FEB-07                                                  5
                                                     2 NEW 02-FEB-07                                                  
                                                     2 BAD 05-FEB-07                                                  3
                                                     2 OLD 07-FEB-07                                                  2
    6 rows selected.

  • How to pass control from main controller to sub controller?

    Hi Experts,
    I have created one controller named "available.do" by which I am calling a view "available.htm". On that view I am showing one Button which says Check Availability. On clicking of this button it shows another view "list.htm". But it is showing new view and old view on same page.
    Second I want to add one button on second view "list.htm" which should perform some function. I don't know how I can achieve this functionality?
    Someone has suggested me that for this I have to create sub controller...but i don't know much about it as I am new in BSP.
    Kindly tell me and paste code so that I can solve my both problems.
    <<Text removed>>
    Thanks in Anticipation,
    Virendra Kedia
    Edited by: Matt on Oct 15, 2011 7:25 AM

    Hi,
    I guess you might have below coding in DO_INIT method,
    me->view_main = 'main.htm'.   "Where VIEW_MAIN is the attribute in you main controller of type STRING.
    you should have below coding in DO_REQUEST of main controller.
    DATA: main TYPE REF TO if_bsp_page.
      me->dispatch_input( ).
    *Create main view.
      main = create_view( view_name = me->view_main ).
    *Set desgin attribute.
      main->set_attribute( name = 'design' value = application->design ).
    *Call main page views.
      call_view( main ).
    *Activate  Sub -controller.
      controller_set_active( controller_id = 'sub_cntrl' active = lc_active ). 
      l_cntl_inst ?= get_controller( controller_id = lv_cntl_id ).  "DATA: l_cntl_inst TYPE REF TO cl_bsp_controller.
    *Call sub-controller.
      call_controller( l_cntl_inst ).
    Please check with this.
    Thanks,
    Chandra

  • Call function, pass value, access variable in movieclip class from main stage

    i am new to flash as.
    I got quite confused on some problems. as the function here
    is quite different from c and asp.net.
    I have a movieClip named MC, and it's enabled with action
    script, with the class name MC_Rectangle
    and a Stage.
    I override the MC_Rectangle class file in a mc_rectangle.as
    external file.
    here is the code:
    package{
    import flash.display.*;
    import flash.events.*;
    public class MC_Rectangle extends MovieClip {
    var sequence:int = new int();
    function setSequence(data:int):void{
    sequence = data;
    function addSequence():void{
    sequence ++;
    I have new a object in the main stage var
    mc_rect:MC_Rectangle = new MC_Rectangle()
    question:
    in main stage:
    1. how can i access the variable "sequence" in "mc_rect"
    2. how can i pass parametre from main stage to mc_rect via
    function setSequence(data:int)?
    3. how can i call the function in addSequence() in mc_rect.
    in asp.net, i usually use mc_rect.sequenct,
    mc_rect.setSequence(data), mc_rect.addSequence() to achieve my
    goals......
    btw, can function in mc_rect return out result to main stage?
    thanks in advance.

    Your as-file must be named MC_Rectangle.as (same upper/lower
    case as in the Class name)
    Ad 1) You have to declare sequence as a public property
    "public var sequence;" or - better - define a getter-function for
    sequence.
    Ad 2) mc_rect.setSequence(8); e. g. (you must write "public"
    in the Class-declaration of setSequence)
    Ad 3) mc_rect.addSequence(); e. g. (you must write "public"
    in the Class-declaration of addSequence)
    ... and yes, your methods can return a value: Replace "void"
    with the proper data type (int, String, ...) and place a "return
    myNumber;" or the like in the method's body.

  • Passing data from calling page to popup window

    Hi All,
    We are developing a BSP application for business card.I need to provide a preview button .
    when the user clicks this button a
    poopup window should open with the preview of business card.
    My problem is how to pass the values like name , designation etc from the main page to popup window.
    The code for previre image:
    <h t m l b : i m a g e   s r c = " s _ b _ d e  tl . g i f  " a l t = " P r e v i e w   C a r d "  o n C l i c k="addr" on C l i e n t C l i c k = " c a l l W i n d o w ( ) ; "/>
    <s c r i p  t t y p e = " t e x t / j a v a s c r i p t ">
    f u n c t i o n  c a l l W i n d o w ()
    w i n d o w .o p e n ( " p r e v i e w . h t m " ) ;
    </s c r i p t >
    preview.htm is a simple HTML page . i need to pass values from main page to this page.
    OR
    Is it possibel to restrict the size of a VIEW to use it as a popup window?
    OR
    is there any other way to achieve this like.. the <bsp:call comp_id=" " />
    tag , but i have no idea how to use it.
    Thanks,
    Anubhav.
    Edited by: Anubhav Jain on Sep 12, 2008 3:38 PM

    Hi Raja,
    I did as suggested by you...but it is behaving strangely.
    It works fine in debuging mode but when executed directly ....it is not working.
    the scenario is:
    Thers an image for preview as follows:
    <htmlb:gridLayoutCell columnIndex="3" rowIndex="13">
    <htmlb:i m a g e   s r c = " s _ b _ d e t l . g i f "   a l t = " P r e v i e w   C a r d "   o n C l i c k = " a d d r "   o n C l i e n t C l i c k = " c a l l W i n d o w ( ) ; " /  >
    </htmlb:gridLayoutCell>
    The JS code is:
    f u n c t i o n   c a l l W i n d o w ( )
    <%
    data: title(5),
             fname(20),
             lname(20),
             comp(20),
             addr(20),
             city(20),
             state(20),
             pcode(20),
             country(20),
             phone(20),
             fax(20),
             email(241).
             alt_addr-title = request->get_form_field( 'title' ) .
             alt_addr-firstname = request->get_form_field( 'fname' ) .
             alt_addr-lastname = request->get_form_field( 'lname' ) .
             company = request->get_form_field( 'comp' ) .
             alt_addr-street = request->get_form_field( 'addr' ) .
             alt_addr-city = request->get_form_field( 'city' ) .
             alt_addr-region = request->get_form_field( 'state' ) .
             alt_addr-inhouse_ml = request->get_form_field( 'pcode' ) .
             alt_addr-country = request->get_form_field( 'country' ) .
             alt_addr-tel1_numbr = request->get_form_field( 'phone' ) .
             alt_addr-fax_number = request->get_form_field( 'fax' ) .
             alt_addr-e_mail = request->get_form_field( 'email' ) .
    CALL METHOD cl_bsp_server_side_cookie=>set_server_cookie
              EXPORTING
                name                  = 'FORMFIELDS'
                application_name      = runtime->application_name
                application_namespace = runtime->application_namespace
                username              = sy-uname
                session_id            = runtime->session_id
                data_value            = alt_addr
                data_name             = 'alt_addr'
                expiry_date_rel       = 1.
    %>
    w i n d o w . o p e n ( " . . / z _ b i z c a r d / p r e v i e w . h t m " ,   " W i n E " ,   " w i d t h = 2 4 0 , h e i g h t = 3 0 0 , t o o l b a r = n o , r e s i z a b l e = no ")
    I was doing something similar...created a controller and a view , was calling the controller from window.open method with all other parameters for sizing etc.
    How to pass a structure conatining data,from controller to the view...
    Now in the onCreate event of the page PREVIEW.HTM in using;
    CALL METHOD cl_bsp_server_side_cookie=>get_server_cookie
      EXPORTING
        name                  = 'FORMFIELDS'
        application_name      = runtime->application_name
        application_namespace = runtime->application_namespace
        username              = sy-uname
        session_id            = runtime->session_id
        data_name             = 'alt_addr'
      CHANGING
        data_value            = alt_addr.
    and in the layout of PREVIEW.HTM in am using this alt-addr:
    But if put a break point at the onCreate event of preview.htm and the execute i get the values in alt_addr but if i execute directly...it is empty in the layout?
    What is the problem?
    Thanks,
    Anubhav.

  • Sub-sections values inherit from main section values

    Hi,
    We have a requirement, where once the CDF file is defined for a placeholder on a section template e.g a right teaser, all the sub-sections of the section should inherit the value defined in the main section. So the teaser defined in top section should inherit to all the sections underneath to display the same information define.
    Any thoughts on how this can be achieved, will be of great help.
    Thanks,
    Anurag
    Edited by: 879837 on Aug 23, 2011 12:22 AM

    Look at this link which shows how to pass values from a subreport to a main report.
    http://www.datamanagementgroup.com/resources/trainerstalk/trainerstalk_howto_share_subreport_data_with_main_report.asp
    You can use the same method to pass values from main report to a subreport.
    1) Create a formula @mainFormula in the main report, as given in item 1 of link.
    2) Place this formulla in a suppressed report footer section above the target subreport.
    3) In the subreport, create a formula @subFormula that declares the same variable name, as given in item 3 of link.
    4) Place @subFormula column in the subreport where you want to display it.

Maybe you are looking for

  • Safari doesn't open new domain name .direct without www

    When I try to open a domain like "mydomain.direct" Safari opens google search, but if I try to open "www.mydomain.direct" the website opens ok. Safari also doesn't open 3rd domains like "something.mydomain.direct" and sends me to google search.

  • I have SOA suite and Jdeveloper, what do i need more for BAM ?

    Hi Thank you for reading my post I have installed both soa suite and latest version of jdeveloper I can see BAM node under connections node but i do not know how should i add the bam server connection. so my questions are : -should i install the bam

  • TS1440 When booting up, grey screen with a 'folder icon' with 'question mark' flashes?

    When I boot up, a grey screen appears with a folder icon with a question mark inside it. The Mac won't respond to and commands or anything, only the On/Off Power button. Any ideas? If you read my previous question, you can see what happened before al

  • CAF (Composite Application Framework) and ESA

    Hi, As far as I understand, XApps is presented as a piece of Netweaver (the column on the left side of the NetWeaver stack), an XApps is also a kind of business process based on several applications (or services ?). XApps runtime and composition plat

  • Capturing reports into Designer 6.0

    Well, I am trying to capture reports into Designer 6.0, and keep getting warning CGEN-02518 WARNING : Parse error, SQL statement cannot be parsed and will be ignored. The same SQL statement has been compiled n number of times and report is running fi