Sub-sections values inherit from main section values

Hi,
We have a requirement, where once the CDF file is defined for a placeholder on a section template e.g a right teaser, all the sub-sections of the section should inherit the value defined in the main section. So the teaser defined in top section should inherit to all the sections underneath to display the same information define.
Any thoughts on how this can be achieved, will be of great help.
Thanks,
Anurag
Edited by: 879837 on Aug 23, 2011 12:22 AM

Look at this link which shows how to pass values from a subreport to a main report.
http://www.datamanagementgroup.com/resources/trainerstalk/trainerstalk_howto_share_subreport_data_with_main_report.asp
You can use the same method to pass values from main report to a subreport.
1) Create a formula @mainFormula in the main report, as given in item 1 of link.
2) Place this formulla in a suppressed report footer section above the target subreport.
3) In the subreport, create a formula @subFormula that declares the same variable name, as given in item 3 of link.
4) Place @subFormula column in the subreport where you want to display it.

Similar Messages

Loading independent sub vis in sub panels and calling from main vi

Hi all,
I have trying to work on the following requirement.
I have a main vi with a file browzer and sub panel - Channel . I will select a channel configuration text file which contains Analog and digital channels names. ''
My vi will read that file and loads and Channel VI in the sub panel - Channel.
Now the CHANNEL VI has a tab control with 2 pages analog and digital. Each page again has sub panels i,e. sub Panel - Analog and sub-Panel-Digital.
Analog VI with some knob controls which are binded to Signals are displayed in the sub Panel - Analog.
Digital VI with some boolean controls which are binded to Signals are displayed in the sub Panel - Digital.
These vis will show the values acquired from the hardware.
I want to provide the user to load any channel configuration file and acquire the data. For the first time the execution is working fine. The next time when I tried to load a new configuration file. it says "Invoke node in main cvi <Append> Method Name <b>Run VI</b> and the new configuration is not loaded.
The following logic is implemented as a sub vi to load and close the sub panel vi.
VI Load logic:
VI CLose Logic
So please let me know where am i doing wrong.
Before loading the new configuration file Iam calling the close logic . But still is not working.
Thanks in Advance.
Ramesh.

Can you post a vi snippet? It would be helpful to see your logic flow, I'm wondering if your problem is that you've got "remove vi" node at the end after you have already closed the vi reference - but can't tell if same vi reference are used as in the case of top diagram.
-DP
New Controls & Indicators made using vector graphics & animations? Click below for Pebbles UI

Passing values from main report to sub-reports

- How do we pass values from main report to sub-report?

Look at this link which shows how to pass values from a subreport to a main report.
http://www.datamanagementgroup.com/resources/trainerstalk/trainerstalk_howto_share_subreport_data_with_main_report.asp
You can use the same method to pass values from main report to a subreport.
1) Create a formula @mainFormula in the main report, as given in item 1 of link.
2) Place this formulla in a suppressed report footer section above the target subreport.
3) In the subreport, create a formula @subFormula that declares the same variable name, as given in item 3 of link.
4) Place @subFormula column in the subreport where you want to display it.

Call function, pass value, access variable in movieclip class from main stage

i am new to flash as.
I got quite confused on some problems. as the function here
is quite different from c and asp.net.
I have a movieClip named MC, and it's enabled with action
script, with the class name MC_Rectangle
and a Stage.
I override the MC_Rectangle class file in a mc_rectangle.as
external file.
here is the code:
package{
import flash.display.*;
import flash.events.*;
public class MC_Rectangle extends MovieClip {
var sequence:int = new int();
function setSequence(data:int):void{
sequence = data;
function addSequence():void{
sequence ++;
I have new a object in the main stage var
mc_rect:MC_Rectangle = new MC_Rectangle()
question:
in main stage:
1. how can i access the variable "sequence" in "mc_rect"
2. how can i pass parametre from main stage to mc_rect via
function setSequence(data:int)?
3. how can i call the function in addSequence() in mc_rect.
in asp.net, i usually use mc_rect.sequenct,
mc_rect.setSequence(data), mc_rect.addSequence() to achieve my
goals......
btw, can function in mc_rect return out result to main stage?
thanks in advance.

Your as-file must be named MC_Rectangle.as (same upper/lower
case as in the Class name)
Ad 1) You have to declare sequence as a public property
"public var sequence;" or - better - define a getter-function for
sequence.
Ad 2) mc_rect.setSequence(8); e. g. (you must write "public"
in the Class-declaration of setSequence)
Ad 3) mc_rect.addSequence(); e. g. (you must write "public"
in the Class-declaration of addSequence)
... and yes, your methods can return a value: Replace "void"
with the proper data type (int, String, ...) and place a "return
myNumber;" or the like in the method's body.

Material exchane ,copy pricing and conditions from main item to sub item.

Hi All,
We are using parts exchange/interchangeability in the transaction ME22N,
While using ME22N we are exchanging main item with interchangeable part and while doing so we want to copy pricing and conditions from main item to sub item.
But its not happening.
As per sap help its possible, details describe below.
http://help.sap.com/erp2005_ehp_04/helpdata/en/c2/0a5288b77d11d3bcce00105ab03aee/content.htm
Price Determination by Copying from Main Item
In the case of price determination by copying from the main item, the net price of the originally ordered part is still used for the superseding part in a part exchange.
The system copies all conditions from the main item to all sub-items and takes into account the order quantity for the main item when calculating scale prices. It does not take into account the conditions and scale prices that exist for the interchangeable part.
You cannot change the conditions, which have been copied from the main item, at sub-item level. It is possible, however, to define additional conditions for each sub-item.
Prerequisites
A calculation schema, which can be altered on an individual basis in Customizing, has been supplied for the price determination.
In the vendor master record, you have set the schema group 09 (interchangeable material).
But in customizing I didnu2019t find value 09 for schema group .
Can any buddy through some light on missing pieces which need to be set?
Thanks
Regards
Ritesh

Hi,
Can you check few more things and tell me?
- In this exit, does XVBPA and XVBAP contains all the line items. ( main and sub items ).
- In Sales order creation time, do these table have VBELN populated when this exit triggers.
- If you modify XVBPA or XVBAP in this exit, do they get overwritten after that.
Try this code. See if it works. Let me know if you still have a problem.
DATA: wa_hvbpa LIKE vbpa,
      wa_xvbpa like vbpa.
CLEAR: wa_hvbpa, wa_xvbpa.
* check if HVBAP and VBAP line items are not same
IF vbap-posnr <> hvbap-posnr.
* read the ****-to partner from main-item
READ TABLE xvbpa INTO wa_hvbpa WITH KEY posnr = hvbap-posnr
                                          parvw = 'WE'.
IF sy-subrc = 0.
*   read the line item data for sub-item based on main item
    READ TABLE xvbap WITH KEY posnr = vbap-posnr
                              uepos = hvbap-posnr.
* See if current line is the child of that BoM parent
    IF sy-subrc = 0.
      MOVE wa_xvbpa-kunnr TO xvbpa-kunnr.
      MOVE xvbap-vbeln TO wa_xvbpa-vbeln.
      MOVE xvbap-posnr TO wa_xvbpa-posnr.
      MOVE 'WE' TO wa_xvbpa-parvw.
      MODIFY vbpa FROM wa_xvbpa.
    ENDIF.
ENDIF.
ENDIF.
Regards,
RS

Sub VI to enter database data taking more time when calling from main VI

Hi All,
I created a sub vi to enter data to a new database, after reading from another database. when i executed that sub vi alone, it took only 2 minutes to enter 20000 records. But when i called that sub VI from my main VI, its taking 35 minutes to enter 20000 records.
my maiin vi has another while loop running parallelly which will perform some other operations. How to handle memory in this case? i mean when i call my sub vi from main vi, i need to give complete processor memory for that sub vi. is it possible?
please help. thanks in advance.
Sooraj

Hi Oliver,
in your example the numeric data is passed from sub-vi to main only when sub-vi terminates, this is what it's supposed to be when you fetch the data from the connector output of a sub-vi.
You can use queues function to exchange data between sub-vi and main.vi; take a look at the example Message Logging with Named Queue.vi.
An alternative method is passing to sub-vi a reference of an indicator (or control) and update its value on the fly.
See example.
Alberto
Attachments:
passing_data_from_sub-vi.llb ‏35 KB

Menu made in movie clip - with sub-section we can click on to go to another frame

I would like some help about that:
I want to do a menu made all in movie clip (NO button). In
this menu, when we click on one of the part (sub-section) of the
button (which is a mc), we must go to another frame in the main
scene.
It is working for the roll-over and mousedown for my button
(with the _up, _over and _down labels). But it's not working then
to put, i don't know, another movie clip inside with alpha 0 to
make another onRelease and then gotoAndStop(20); ...
Here is the code I have in the main scene (first frame):
stop();
mon_clip_mc.onRelease = function() {
//this._root.gotoAndStop(20);
And here is the code I have in the first frame of the movie
clip of the button:
stop();
I'd really appreciate some help! Thanx

lalapinerouge,
as far as I can see with your method for buttons, is that it
only reads 1 button inside mon_clip_mc..
I cant figure out why, i've tested it over, made new fla's
with your method, and i still cant get it to work, nor do I
understand why..
I need to study abit more.
Maybe someone in the Forum will have a look at this topic,
and know what's going on with your method.
In the mean time, heres a submenu I made for a site a while
ago. This doesnt use timeline actionscript, ( because i was a
newbie then ) =)
if you have a look through the whole FLA, ( it's quite abit)
you can get an Idea of how i do my movie clip buttons, till this
day, i still use the same method, only i use mainly timeline
actionscript..
the main point to notice is that EVERY button ( even submenu
) is it's own movieclip...no button in there holds multiple sub
buttons inside... This gives you complete control of each button,
and endless possibilities for animation, tweens, and anything extra
you would want to add to a button.
Sorry I couldnt help you figure out your problem fully. Im
still going to mess around with it abit more to see if i can figure
it out..
Hope you can addopt some useful info from this FLA.
HERE

Display multiple records as sub-sections in the same report.

I am using Crystal Reports (VS-2005).
In a report, I have various sub-sections in the Details section. Each section represents a category and is connected with SQL command which uses LEFT OUTER JOIN.
The first section is the main section and the subsequent sections are the child sections.
Sometimes, a sub-section (other than the first main sub-section) picks multiple records of that category. In this case the report extends to multiple pages. Each report displays one record of this sub-section.
I want to show the the same sub-section multiple times in the same report as opposed to multiple reports that are now automatically generated by Crystal Reports.
How to handle this issue?

This is a .NET programming forum related to Crystal Reports. Your question is best suited for our report design forum below. Also, when you post your question it will be helpful if you use report design terminology. We have elements like Report Header, Page Header, Groups, and Details sections. Just mentioning "sections" doesn't give us a good idea about what you are attempting to do.
Check out the grouping options and see if it helps. You might need to create a formula to help you with your grouping though.
If you like, I can move this to the design forum.
[SAP Crystal Reports Design|SAP Crystal Reports;

Copy down Ship-to Partner from main item to sub-items on Sales Order

This is my first post on the forums here. I'd appreciate any help you can give on my issue below.
I have a requirement to copy down the ship-to partner from the main item to sub-items during sales order create or change. Currently I have code in include MV45AFZB within user exit USEREXIT_FILL_VBAP_FROM_HVBAP as follows:
<i>* Need to be able to copy the ship-to of a BoM parent down to the
respective BoM children if the parent has a different ship-to
from the header.
data: wa_xvbpa like vbpa.
Clear: wa_xvbpa.
read table xvbpa into wa_xvbpa with key posnr = hvbap-posnr
                                        parvw = 'WE'.
A BoM parent line has a different ship-to from the header.
    if sy-subrc = 0.
      read table xvbap with key uepos = hvbap-posnr.
See if current line is the child of that BoM parent
        If xvbap-uepos = hvbap-posnr.
          move wa_xvbpa-kunnr to xvbpa-kunnr.
          move xvbap-vbeln to wa_xvbpa-vbeln.
          move xvbap-posnr to wa_xvbpa-posnr.
          move 'WE' to wa_xvbpa-parvw.
          modify vbpa from wa_xvbpa.
        endif.
      Endif.</i>
This isn't working for me. At one point, I was able to copy the ship-to down to the first sub-item but not any subsequent ones. I'm sure I need to add some code to another sales order user exit to get this to work, but I'm at a loss at this point.   Has anyone had to do this or something similar before?
Thanks very much in advance for your help.
Angela

Hi,
Can you check few more things and tell me?
- In this exit, does XVBPA and XVBAP contains all the line items. ( main and sub items ).
- In Sales order creation time, do these table have VBELN populated when this exit triggers.
- If you modify XVBPA or XVBAP in this exit, do they get overwritten after that.
Try this code. See if it works. Let me know if you still have a problem.
DATA: wa_hvbpa LIKE vbpa,
      wa_xvbpa like vbpa.
CLEAR: wa_hvbpa, wa_xvbpa.
* check if HVBAP and VBAP line items are not same
IF vbap-posnr <> hvbap-posnr.
* read the ****-to partner from main-item
READ TABLE xvbpa INTO wa_hvbpa WITH KEY posnr = hvbap-posnr
                                          parvw = 'WE'.
IF sy-subrc = 0.
*   read the line item data for sub-item based on main item
    READ TABLE xvbap WITH KEY posnr = vbap-posnr
                              uepos = hvbap-posnr.
* See if current line is the child of that BoM parent
    IF sy-subrc = 0.
      MOVE wa_xvbpa-kunnr TO xvbpa-kunnr.
      MOVE xvbap-vbeln TO wa_xvbpa-vbeln.
      MOVE xvbap-posnr TO wa_xvbpa-posnr.
      MOVE 'WE' TO wa_xvbpa-parvw.
      MODIFY vbpa FROM wa_xvbpa.
    ENDIF.
ENDIF.
ENDIF.
Regards,
RS

Book numbering properties window – Section and Sub-section grayed out

In FM 12, I have a book composed of one front-matter file and 9 chapter files. The chapters (1-9) auto-numbered without any problems and pagination is correct. I want to add section and subsection numbers. Within each file I added autonumber format tags to the headers used specifically for section and subsection titles on the first chapter page and autonumber format tags within the body of the chapters. The autonumber tags are –
<$chapnum>.<$sectionnum>\t
<$chapnum>.<$sectionnum>.<$subsectionnum>\t
for paragraph tags Heading 2 and Heading 3, respectfully.
When I select numbering in the book file window and click on either the Section and Sub-section tab, the windows are grayed out. I know I'm missing something obvious. I've gone through help files, manuals and tutorials for hours and can't find what I need. Any advice about where I can look to sort this out?
Thank you.

Almost, but not quite. FM books (now) have the ability to specify internal Folders and Groups. You can then assign (i.e. move) the relevant FM files into these structures to create more of a hierarchical structure in the book - see: Adobe FrameMaker 12 * About books and also see: Numbering in Hierarchical Books « TechComm Central by Adobe
Once the file is assigned to a folder or sub-folder, then the section and subsection numbering properties become available for that file.

Determination of GL accounts from Main and Sub Transaction

Hi,
I have configured main and sub transactions with associated G/L accounts. Is there any program/table through which I can find out the assciated G/L accounts which are already configured if I pass Main and Sub transactions.

Hi Jayanta,
Please find below Path for maintaining Sub Transaction
SAP Customizing IMG -> Financial Accounting (New) -> Contract Accounts Receivable and Payable -> Basic Functions -> Postings and Documents -> Document -> Maintain Document Assignments -> Maintain Sub-Transactions
You will find the all the sub transaction for all the main transaction configured.
Or
the table "TFKTVO".
Hope this helps.
Regards,
Manish
Edited by: Manish Bisht on Jul 15, 2009 7:26 AM

Sub report group tree in main report Using crystal report 12

Hi experts,
    I have a strange requirement like, same data needs to be grouped two different ways in a same report. Like
Store1:
    Summary of sales on each item chart
Store2:
    Summary of sales on each item chart
.....it goes like this
Department1(multiple stores)
      summary of sale on each item chart - store1
      summary of sale on each item chart - store2
     --........ it goes
Department2
      summary of sale on each item chart - store3
--........ it goes
   Its in single report, the first part is grouped only with store and in second part the store is under department. How to do this in same report?
    I achieved this by creating a sub report to display the first part of data and in the main report sup report data plus the second part of data will be displayed. And its working well but now the problem is the group tree, I'm not able to see the sub report group tree in the main report.
   How to get the sub report group tree in the main report, Or is there any other better way is there so i can get both the data as well the group tree. Please help me to solve this. CryCryCry
I'm using crystal report 2008(installed separately) with Visual Studio2008 (.Net3.5)
Thanks in advance.

Hi
Thanks for the reply.
    Yea both data source are same(Datasource is SQL Stored Procedure). I cant use like that, because my client needs the group tree also. In case if there is no group tree, we can create one more group and supress it conditionaly. But here the problem is there is no way to suppress any of the group item in group tree as we can do it in the detail section.
    So please me with some different ways and also , please clarrify the following doubts
1. Can we supress one or more items in the group tree.
2. Can we get the sub report group tree in main report(Everything is working when i used the sub reports except the group tree). So I'm trying for different ways to do, but none is helping me
Please help me

How can I assign image file name from Main() class

I am trying to create library class which will be accessed and used by different applications (with different image files to be assigned). So, what image file to call should be determined by and in the Main class.
Here is the Main class
import org.me.lib.MyJNIWindowClass;
public class Main {
public Main() {
public static void main(String[] args) {
MyJNIWindowClass mw = new MyJNIWindowClass();
mw.s = "clock.gif";
And here is the library class
package org.me.lib;
public class MyJNIWindowClass {
public String s;
ImageIcon image = new ImageIcon("C:/Documents and Settings/Administrator/Desktop/" + s);
public MyJNIWindowClass() {
JLabel jl = new JLabel(image);
JFrame jf = new JFrame();
jf.add(jl);
jf.setVisible(true);
jf.pack();
I do understand that when I am making reference from main() method to MyJNIWindowClass() s first initialized to null and that is why clock could not be seen but how can I assign image file name from Main() class for library class without creating reference to Main() from MyJNIWindowClass()? As I said, I want this library class being accessed from different applications (means different Main() classes).
Thank you.

Your problem is one of timing. Consider this simple example.
public class Example {
    public String s;
    private String message = "Hello, " + s;
    public String toString() {
        return message;
    public static void main(String[] args) {
        Example ex = new Example();
        ex.s = "world";
        System.out.println(ex.toString());
}When this code is executed, the following happens in order:
1. new Example() is executed, causing an object to constructed. In particular:
2. field s is given value null (since no value is explicitly assigned.
3. field message is given value "Hello, null"
4. Back in method main, field s is now given value "world", but that
doesn't change message.
5. Finally, "Hello, null" is output.
The following fixes the above example:
public class Example {
    private String message;
    public Example(String name) {
        message = "Hello, " + name;
    public String toString() {
        return message;
    public static void main(String[] args) {
        Example ex = new Example("world");
        System.out.println(ex.toString());
}

HT3349 How do you select a sub-set of cells from the entire document so you can print only those specific cells?

How do you select a sub-set of cells from the entire document so you can print only those specific cells?

There is no analog to MS Excels print range. So the next best thing is to plan your data so that you don't need to use print range. The next best thing after that is to select the range of cells you want to print, then copy, the switch to the application Preview, and create a new document from the clipboard (select the menu item "File > New from Clibboard") then select all, copy then paste to the destination (maybe an email) .
You can also paste that portion of the table into another table (or a new table) by pasting values only

Time capsule is asking to inherit from previous computer but I have not changed computers.

Turned on the computer and a box popped up from Time Capsule asking if I wanted to backup now. This is the first time this has happened and I have had my computer set up with this Time Capsule for over a year. lt opens a box with three buttons:
>back up now
>inherit back up from previous - it warns that if one selects inherit from another computer, that other computer can no longer back up to this time capsule
>create new back up
It was set up to back up automatically, not sure what has caused it to start asking every time I log on.
So I want to know if I should "inherit" even though I have not changed computers?

Did you happen to just upgrade Mavericks to 10.9.4?? I should not think so but just to ask if something just happened that could explain the normal irrational behaviour of Mavericks.. if there is nothing that has happened.. well it is the standard ghost in the machine explanation.
If you have several computers backing up to the TC, now might be a good time to make a decision to stop that.
If this is the your iMac in your profile, my suggestion would be as follows.
1. Reset TM
See A4 here.
http://pondini.org/TM/Troubleshooting.html
2. Run verify of the backup. See A5 same reference.
3. Install the widget.. See A1 same reference.
If it keeps giving you nonsense.. start over. Delete the existing backup or better still archive it, wipe the TC and start afresh.
I would seriously think about plugging in a USB drive and using Carbon Copy Cloner (or similar third party backup software).. a bootable clone will make a much more reliable backup and you can still have TM backing up to the TC.
See http://pondini.org/TM/Clones.html
The value of clones I think has grown considerably since the reliability of TM has dropped dramatically in Mavericks.

Sub-sections values inherit from main section values

Similar Messages

Maybe you are looking for