SPML request/response logging

During the testing stages of our implementation, we would like to capture the contents of the spml request and response to a file. This will assist in debugging problems without having to ask HR to send what they've captured. Any ideas?

Does anybody have suggestions on how to log SPML request/responses at the server side?
We have multiple SPML clients, some from 3rd party vendors so we cannot control logging on the client side

Similar Messages

JCO - request response log file

Hi
I could not find log files of the Request and Response to ERP (using JCO). Anyone has idea where I could see the log?
thanks

I know in workbench of the XML output method - this is not what I am looking for. I have the XML request and response but I would like to see how MII sends this request and response
From the Netweaver, I did what you suggested but I got an empty page. No logs.
(show view Expert, display log dev_jrfc.trc)
The reason I am asking is that I sent in a BAPI with JCO (BAPI_MATERIAL_GETLIST ) note: at the end of the BAPI name is an empty space. In workbench when I generate sample, the Rquest and response has BAPI_MATERIAL_GETLIST_ .
In XML Request it is written <BAPI_MATERIAL_GETLIST_> and the response is <BAPI_MATERIAL_GETLIST_--20>. The weird thing is I got the Material list that I required.
So I would like to see what exacly being sent out BAPI_MATERIAL_GETLIST_ or BAPI_MATERIAL_GETLIST and what actually the repy I got from ERP BAPI_MATERIAL_GETLIST or BAPI_MATERIAL_GETLIST_--20
it could be a bug in MII 12.1

Do I have to configure realm policy in Access Manager for IDM SPML Request

Hi all,
I wanted to run a SPML request from my application to the IDM which is presently protected by an AM server. Somehow, I get the following error, while I run a search using SpmlClient:
org.openspml.util.SpmlException: Unsupported response content type "text/html", must be: "text/xml".
Do I have to set a policy in Sun Access manager for the realm? Guys, pls help.
Thanks,
Aneesh.

> I believe as long as you have access to the above two you can turn the CA off if you want.
Enterprise CAs are not intended to be offline. Therefore, you should not turn off them. If these root CAs issue certificates only to subordinate CAs, then you should consider to implement offline Standalone (not Enterprise) Root CAs.
> I believe the location of the CRL is detailed in the CDP which is detailed on the Certs issued but a given CA, so the client can look in the Cert and see what it states about the CDP and thereby get the list of revoked certs.
this is correct.
> to place its CDP at a location other than the default location in case it overwrites the existing CRL at the default location
no, CDP locations should be defined in the post-installation script.
> does the fully qualified X500 name of the CDP include the CA Name (and therefore be unique) and it will not over write the original
yes, LDAP URL includes CA server's NetBIOS name to differentiate between CAs.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

Is there a way to attach request/response handlers in BEA Weblogic Workshop similar to Axis?

Apache Axis allows developers to attach Request/Response handlers to do
stuff like logging, authorization check etc.
Something like...
public class MyHandler extends org.apache.axis.handlers.BasicHandler {
public void invoke(org.apache.axis.MessageContext msgContext) throws
AxisFault
Does BEA Weblogic Workshop has a similar capability?
Thanks.
Best Regards
Hitesh

Hi Hitesh,
The logging in Workshop user log4j and is configured in the
<WL-HOME>/weblogic700/server/lib/workshopLogConfig.xml file.
To log the SOAP responses, add the following lines in the xml file:
<category name="knex.SoapJwsReq"> <priority value="debug" /> <appender-ref
ref="MYLOGFILE" /> </category>
<category name="knex.SoapJwsResp"> <priority value="debug" /> <appender-ref
ref="MYLOGFILE" /> </category>
The MYLOGFILE can be configured by copying from the already defined
appenders. The file location is relative to the domain directory.
<appender name="MYLOGFILE" class="org.apache.log4j.RollingFileAppender">
<param name="File" value="mylog.log" />
<param name="Append" value="true" />
<param name="MaxFileSize" value="3000KB" />
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d{DATE} %-5p %-15c{1}: %m%n"/>
</layout>
</appender>
As of now, the SOAP request message is not logged, only the responses are
getting logged. This will be corrected within the next few days. Please also
note that if you are using the Test View for running the web service, you
should use the 'Test XML' tab for seeing the SOAP requests/responses. The
'Test Form' tab uses HTTP GET, and hence you will not see any SOAP messages.
Do let me know if you have any further queries.
Regards,
Anurag
Workshop Support
"Hitesh Seth" <[email protected]> wrote in message
news:[email protected]...
Thanks Anurag. What is the best recommended way in BEA Weblogic Workshop
today to implement a logger which will log all SOAP Requests & Responses
into a custom logging system.
Best Regards
Hitesh
"Anurag Pareek" <[email protected]> wrote in message
news:[email protected]...
Hitesh,
You can modify the SOAP request and response payload by using ECMA
Script
and XMLMaps.
In the current release, Workshop does not support 'handlers' for SOAP
messages.
Regards,
Anurag
Workshop Support
"Hitesh Seth" <[email protected]> wrote in message
news:[email protected]...
Apache Axis allows developers to attach Request/Response handlers to
do
stuff like logging, authorization check etc.
Something like...
public class MyHandler extends org.apache.axis.handlers.BasicHandler {
public void invoke(org.apache.axis.MessageContext msgContext)throws
AxisFault
Does BEA Weblogic Workshop has a similar capability?
Thanks.
Best Regards
Hitesh

Best way to implement request-response and still reliability

          HI,
          what is the best way to implement a request -response paradigm and still have
          the reliability that message will be 100% processed and give response...do i need
          to create the permanant queues with storage..
          anybody gives suggestions..
          Akhil


Hi Akhil,
          Temporary destinations can only store non-persistent messages
          as per JMS spec - so they are not useful for reliable for holding
          responses that must survive longer than the life of the
          interested client. For persistence, you will need to use configured
          queues or durable subscriptions. For detailed
          discussion of request/response, I suggest reading the "WebLogic JMS
          Performance Guide" white-paper on dev2dev.bea.com. If you
          have many clients, or expect large message back-logs,
          there can be a performance impact when using selectors...
          FYI: There is a new pub/sub subscriber index enhancement
          that is available in 8.1 and
          in the latest service-packs for 6.1, 7.0.
          "Indexing Topic Subscriber Message Selectors To Optimize Performance"
          http://edocs.bea.com/wls/docs81/jms/implement.html#1294809
          This may be useful.
          Tom, BEA
          Akhil Nagpal wrote:
          > HI,
          > what is the best way to implement a request -response paradigm and still have
          > the reliability that message will be 100% processed and give response...do i need
          > to create the permanant queues with storage..
          >
          > anybody gives suggestions..
          > Akhil

Workbench freezes on call to BAPI_PRODORDCONF_GETLIST Request/Response XML

I have created a simple transaction in MII 12.0.6 with three JRA actions: Start Session, Function Call, and End Session. From the configuration dialog of the Function Call action, I confirmed the existance of BAPI_PRODORDCONF_GETLIST via a BAPI search. I attempted to select this BAPI only to have the Workbench freeze up. This BAPI works flawlessly in SE37. I checked the logs and saw that the following error message was thrown:
com.sap.mw.jco.jra.JRA$ResourceException: Couldn't execute interaction. Transaction rolledback due to connection interruption...
I am using the same JRA connection to call BAPIs in other transactions without any issues.
Has someone ran into a similar issue before that could assist me in resolving this?
FYI...my objective is to obtain a list of confirmations, including the confirmation number and confirmation counters, from the output of this BAPI which will be inputted into BAPI_PROCORDCONF_GETDETAIL to maintain a count of the yield and scrap already confirmed for that particular operation/phase.
Thanks,
Michael Teti
Senior Solutions Consultant
SeeIT Solutions, LLC

Michael,
It was my understanding (via customer confirmation) that the returned Yield and Scrap located in the Phase tables of the BAPI_PROCORD_GET_DETAIL Bapi are the Planned Operation Yield and Scrap for that operation and not the Yield and Scrap already confirmed. The Help documentation in the BAPI Explorer does not verify this one way or another.
Also, after numerous attempts of trying to pull down the BAPI_PROCORDCONF_GETLIST Request/Response XML, the configuration dialog actually closed. It tooke quite a long time to complete. My guess is that it timed out because when I look at the BAPI structure, there was none.
I did see the other thread prior to my submission but since that thread was referring to a JCO connection and a timeout wasn't actually confirmed on my end, I decided to creat a new one.
Thanks,
Michael Teti

TemporaryQueue communication - Request/Response messaging in JMS

Not able to make simple JMS application with the following steps run
Start the Server
Start the Client
The Client creates a temporary queue and sends the name to the server
Server receives message and sends a test message back.
Client NEVER receives the test message
Can someone provide me appropriate sample example in this regard. Using "oc4j_extended_101320"
Thanks
sunder
Note the server recives the request and logs the message
but client doesnt consume the message.
Here is client code
package project1;
import java.rmi.*;
import java.util.*;
import javax.jms.Connection;
import javax.jms.JMSException;
import javax.jms.MapMessage;
import javax.jms.Message;
import javax.jms.MessageConsumer;
import javax.jms.MessageListener;
import javax.jms.MessageProducer;
import javax.jms.Queue;
import javax.jms.QueueConnection;
import javax.jms.QueueConnectionFactory;
import javax.jms.QueueSender;
import javax.jms.QueueSession;
import javax.jms.Session;
import javax.jms.TemporaryQueue;
import javax.jms.TextMessage;
import javax.naming.*;
public class TestClient {
private QueueSender sender;
private Session session;
private Connection connection;
private MessageConsumer consumer;
private MessageProducer producer;
* Constructor: Setup JMS for publishing
public TestClient() {
try {
Context ctx = getInitialContext();
System.out.print("env " + ctx.getEnvironment());
QueueConnectionFactory conFactory =
(QueueConnectionFactory) ctx.lookup("jms/QueueConnectionFactory");
Queue chatQueue = (Queue) ctx.lookup("jms/TestQueue");
// Create a JMS connection
connection = conFactory.createConnection();
// Create a JMS session object
session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
TemporaryQueue replyQueue = session.createTemporaryQueue();
TextMessage textMsg = session.createTextMessage();
textMsg.setText( "How r u dude!!!!!!!");
textMsg.setJMSReplyTo(replyQueue);
textMsg.setJMSExpiration(40000l);
System.out.println("\nsender 1 ========== >>>>> " + replyQueue.getQueueName());
consumer = session.createConsumer(replyQueue);
System.out.println("sender 2========== >>>>> " + replyQueue.getQueueName());
System.out.println("sender 2a========== >>>>> \n" + textMsg.getJMSMessageID() +"\n");
System.out.println("sender 2b========== >>>>> \n" + textMsg.getJMSCorrelationID() +"\n");
producer = (MessageProducer) session.createProducer(chatQueue);
producer.send(textMsg);
System.out.println("sender 3a========== >>>>> \n" + textMsg.getJMSMessageID() +"\n");
System.out.println("sender 3b========== >>>>> \n" + textMsg.getJMSCorrelationID() +"\n");
} catch(Exception e) {
e.printStackTrace();
finally {
* Method: sendmail(Map mail)
public void sendmail() throws Exception {
Message respmessage = (TextMessage )consumer.receive();
System.out.println("sender 3========== >>>>> " + ((TextMessage)respmessage).getText());
private Context getInitialContext() throws NamingException {
Properties env = new Properties();
env.put(Context.INITIAL_CONTEXT_FACTORY,
"com.evermind.server.rmi.RMIInitialContextFactory");
env.put("java.naming.provider.url", "ormi://localhost");
env.put("java.naming.security.principal", "oc4jadmin");
env.put("java.naming.security.credentials", "welcome1");
return new InitialContext(env);
* Static Method: java com.customware.client.EmailClient to_addr [from_addr] [subject] [body]
public static void main(String args[]) throws Exception {
System.out.println("\nBeginning EmailClient\n");
TestClient client = new TestClient();
client.sendmail();
MDB code
package project2;
import javax.ejb.CreateException;
import javax.ejb.EJBException;
import javax.ejb.MessageDrivenBean;
import javax.ejb.MessageDrivenContext;
import javax.jms.Destination;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.MessageListener;
import javax.jms.MessageProducer;
import javax.jms.Session;
import javax.jms.ConnectionFactory;
import javax.jms.Connection;
import javax.jms.MapMessage;
import javax.jms.TextMessage;
public class MessageDrivenEJBBean implements MessageDrivenBean,
MessageListener {
private MessageDrivenContext _context;
private javax.jms.ConnectionFactory connectionFactory;
private javax.sql.DataSource dataSource;
public void ejbCreate() throws CreateException {
dataSource = ResourceFactory.getInstance().getPricingDS();
//java:comp/env/jdbc/PricingDS
connectionFactory = ResourceFactory.getInstance().getPricingRespQueueCF();
public void setMessageDrivenContext(MessageDrivenContext context) throws EJBException {
_context = context;
public void ejbRemove() throws EJBException {
public void onMessage(Message message) {
TextMessage msg = null;
Connection connection = null;
try {
if (message instanceof TextMessage) {
msg = (TextMessage) message;
System.out.println
("Dood Message "
+ msg.getText());
connection = connectionFactory.createConnection();
Destination replyDest = message.getJMSReplyTo();
System.out.println
("Dood Reply Queue "
+ msg.getJMSReplyTo());
String replyMsgId = msg.getJMSMessageID();
Session session = connection.createSession(true, 0);
System.out.println("Creating producer!!!!!!!!"+ replyDest);
System.out.println("Creating consumer!!!!!!!! ID\n\n"+ replyMsgId);
System.out.println("Creating consumer!!!!!!!!COR ID\n\n"+ msg.getJMSCorrelationID());
MessageProducer producer = session.createProducer(replyDest);
TextMessage replyMsg = session.createTextMessage();
replyMsg.setText("Response Message!!!!!!!! Good Job" );
replyMsg.setJMSCorrelationID(replyMsgId);
producer.send(replyMsg);
System.out.println("Creating producer!!!!!!!!ID\n\n"+ replyMsg.getJMSMessageID());
System.out.println("Creating producer!!!!!!!!COR ID\n\n"+ replyMsg.getJMSCorrelationID());
producer.close();
session.close();
} else {
System.out.println
("Message of wrong type: "
+ message.getClass().getName());
} catch (Throwable te) {
te.printStackTrace();
finally {
try{
if(connection!=null)
connection.close();
} catch(Exception e) {
Message was edited by:
user565613

You created a transacted session on the server, and then never committed the transaction. Since the transaction was not committed before the session was closed, it is automatically rolled back as per the JMS spec. Either call commit on the session or use a non-transacted session (e.g., use session-creation paramters of "false, Session.AUTO_ACKNOWLEDGE").
-Jeff

Failed to send request/response to peer. send() failed with error code 32?

hello, chris:
recently we check the tterros.log, we found the following erros:
2009-11-12 09:48:18.41 Err : REP: 893538: OCEDATA:transmitter.c(5762): TT16059: Failed to send request/response to peer. send() failed with error code 32
2009-11-12 09:48:18.41 Err : REP: 893538: OCEDATA:transmitter.c(3048): TT16121: Failed to flush transaction queue. Restarting log read loop
2009-11-12 12:08:14.19 Err : REP: 893538: OCEDATA:transmitter.c(5762): TT16059: Failed to send request/response to peer. send() failed with error code 32
2009-11-12 12:08:14.19 Err : REP: 893538: OCEDATA:transmitter.c(3048): TT16121: Failed to flush transaction queue. Restarting log read loop
what does these mean?? Does this have any effect on replication?? thank you ...

These messages indicate a loss of connectivity between the replication agents. This could be due to one some kind of failure (e.g. network issue). If the messages are infrequent and replication is otherwise working okay they are not a big cause for concern though if I were you I would check the network etc. for anything abnormal.
Chris

Client Request/Response Context

I'm new to Weblogic Integration and have a question regarding client response action.
I've seen an example of a quick workflow where the webpage calls the process
and gets a response back. In essence the workflow is synchronous.
Now I want to include a long running process, using Worklists and involving many
different actors. During the worklist task acceptance I want to get some feedback
from the user. My questions is what context does the Client Request/Response
execute in. The example in the docs shows the worklist application. Is this
absolutely required? How about a client response to a portlet.
Thanks,
noah

One of the Certification mandates logging the remote client IP AND PORT for each log-event.
I cannot pass these from GUI client because the user may
be on a private network. This calls for capturing the IP and PORT at GUI server end.
Capturing remote IP is simple as SOAP library exposes the request object from which the IP can be obtained.
The dificult part is to capture port. I addressed this problem by introducing a
new Tomcat Service Engine, CSMServiceEngine. This engine has access to the underneath socket using which
i obtain the client port and pass it across to SOAP layer as a x-csm-client-port HTTP theader.
I have a custom SOAP provider, CSMSoapSPI, which obtains the port using the above x-header and the
client IP from its request object. THese are done only for 'login' task and hence i published a new
SOAP service: LoginCommand.
But bcoz of upgradation of tomcat from 4.0 to 5.0.28 the invoke method in the StandardEngine(which was initially extended by class i posted) is made final with JDK 1.5 and i can no longer use the StandardEngine. Hence i tried with the Valve class.But with no luck.
Hope this answers ur question

BlazeDS RPC request-response - Require ability to push server-response asynchronously

Hi BlazeDS developers,
I understand that BlazeDS has RPC req-response async client and server mechanism (whats the big deal html UI also has been aync?). It also has publish subcribe pattern with ability to have server side push to client.
My questions is if below ability present in BlazeDS in request-response RPC?? (Do not want to use pub-sub messaging.):
Asynchronous mechanism for a response "at server side" (not between client and server) i.e.
1. a request from flex client using RemoteObject on a POJO at server,
2. POJO at server processes the request asynchrnously, i.e. spawns a thread, and does some business logic calculation.
3. Has the response ready after few seconds.
4. prepares the response and pushes to client
Server business logic does not have to block client POJO object function call made from RemoteObject RPC from client. (consider RemoteObject use case)
Thanks in advance for your comments/answers
Nilesh

Hi Nilesh,
What you describe is not currently possible in BlazeDS with request/response RPC requests. While handling of remote object requests is async in the client code, it's not async between the client and the server.
A bug has been logged to get this functionality added and it is currently targeted for inclusion in the next release of BlazeDS.
Here is the link to the bug if you want to watch its progress.
https://bugs.adobe.com/jira/browse/BLZ-184
Hope that helps.
-Alex

RMAN Restore Error - media recovery requesting unknown log: thread 1 seq 7

Im using RMAN to copy a database to another server. The new server is IDENTICAL to the old one. By identical I mean it has the same sever name, ip address, operating system, Oracle version and directory structure.
The new server already has the instance created, (same name as the old server instance, paths etc)
The backup files have been manually restored to the new server, same locations as they were on the old one. ( RMAN did an automatic controlfile backup and also the archivelogs on the old server ).
Ive restored the control file on the new server from the RMAN backup pieces.
Ive catalogued the RMAN backup pieces on the new server.
I know the last sequence available in the archivelogs backup by running on the new server :
list backup of archivelog all;
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
5 14.43M DISK 00:00:03 11-MAY-11
BP Key: 9 Status: AVAILABLE Compressed: NO Tag: TAG20110511T163502
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
011_05_11\O1_MF_ANNNN_TAG20110511T163502_6WOC5833_.BKP
List of Archived Logs in backup set 5
Thrd Seq Low SCN Low Time Next SCN Next Time
1 2 550217 10-MAY-11 556559 11-MAY-11
1 3 556559 11-MAY-11 559776 11-MAY-11
1 4 559776 11-MAY-11 560093 11-MAY-11
1 5 560093 11-MAY-11 560794 11-MAY-11
BS Key Size Device Type Elapsed Time Completion Time
7 15.50K DISK 00:00:01 11-MAY-11
BP Key: 10 Status: AVAILABLE Compressed: NO Tag: TAG20110511T163653
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\
011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_.BKP
List of Archived Logs in backup set 7
Thrd Seq Low SCN Low Time Next SCN Next Time
1 6 560794 11-MAY-11 560851 11-MAY-11
So far its all going swimmingly well.
Now I want to restore the datafiles and recover. So I ran :
RMAN run { restore database; recover database; alter database open resetlogs; }
This gave me the output below which goes great but I get a final error, I think the error is because its looking for an archive log thats not in the backup set, but it should be. However, I think SCN 560851 is for a log that hadnt been created yet on the old server when the backup was ran ?
How do I address resolving the error ? Its worth pointing out log, "archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
\2011_05_11\O1_MF_1_6_6WOK1X4W_.ARC recid=10 stamp=750881741" isnt on the old server either which is why its not in the backup set.
I can do a alter database open reset logs but Id prefer to know why its failing.
Any help would be much appreciated.
RMAN> run { restore database; recover database; alter database open resetlogs; }
Starting restore at 11-MAY-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSTEM01.DBF
restoring datafile 00002 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\UNDOTBS01.DBF
restoring datafile 00003 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\SYSAUX01.DBF
restoring datafile 00004 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\SAT\USERS01.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_.BKP
channel ORA_DISK_1: restored backup piece 1
piece handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
11\O1_MF_NNNDF_TAG20110511T163507_6WOC5CM7_.BKP tag=TAG20110511T163507
channel ORA_DISK_1: restore complete, elapsed time: 00:00:55
Finished restore at 11-MAY-11
Starting recover at 11-MAY-11
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=6
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\SAT\BACKUPSET\2011_05_11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_.BKP
channel ORA_DISK_1: restored backup piece 1
piece handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\BACKUPSET\2011_05_
11\O1_MF_ANNNN_TAG20110511T163653_6WOC8PMP_.BKP tag=TAG20110511T163653
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
\2011_05_11\O1_MF_1_6_6WOK1X4W_.ARC thread=1 sequence=6
channel default: deleting archive log(s)
archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\SAT\ARCHIVELOG
\2011_05_11\O1_MF_1_6_6WOK1X4W_.ARC recid=10 stamp=750881741
unable to find archive log
archive log thread=1 sequence=7
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 05/11/2011 18:15:42
RMAN-06054: media recovery requesting unknown log: thread 1 seq 7 lowscn 560851
RMAN>
Edited by: user12173666 on 11-May-2011 10:28

You need to do incomplete recovery i.e. to ask RMAN to restore/recover to some specific point in time. This is usually done with some UNTIL clause or SET UNTIL statement. Example in your case:
SET UNTIL SEQUENCE 7;See http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta065.htm#RCMRF160.

Sender adapter request response bean not working for calling a webservice

Hi All,
In PI 7.31, My scenario : SOAP sender Asynch-> PI -> HTTP Receiver Sync ->take response to call another webservice (SOAP)
I have configured request response bean and response one way bean in the sender adapter to make this work.
Attached the screenshot of the module config in the sender soap adapter. The final response from HTTP has to be used to call another webservice (not sender webservice)
This giving an error "couldn't retrieve binding values for sender to receiver etc etc ----------"
Has anyone configured response one way bean to call a webservice to submit? If so, please share the configuration details. And let me know if I am doing anything wrong
thx
mike

Hi Michael,
I think the adapter type is for the receiver channel looking at the documentation SAP Library - SAP Exchange Infrastructure
Have you checked your receiver channel doesn't belong to a party?
I havent tried this bridge with the http_aae but looks to be problematic according with Michal comment here http://scn.sap.com/community/pi-and-soa-middleware/blog/2014/01/28/generic-pi-async-sync-bridge-configuration-for-any-adapters#comment-454463
Regards.

Using Request Response Bean Module in FILE Adapter

Hi Experts,
Can we use Request Response Bean Module in FILE Adapter in reverse way. That is can we configure thses adapter modules in Reciever file channel and call a sender file channel in it?
My case is RFC to File synchronous case? How do we do this?
Thanks & Regards,
priyanka

Can we use Request Response Bean Module in FILE Adapter in reverse way. That is can we configure thses adapter
modules in Reciever file channel and call a sender file channel in it?
My case is RFC to File synchronous case? How do we do this?
The above is not possible....Bean works only for Sender channel and not for Receiver.....requirement not possible using even a BPM as FILE does not support SYNC communication in receiver end......max you can do is split the scenario into SYNC-ASYNC bridge.
Regards,
Abhishek.

ESB Console turns Request/Response message into One Way message

Hi folks,
have come across a strange situation and wondered if anyone else had come across this. Maybe it's fixed as part of a patch set.
I'm running SOA Suite 10.1.3.1.0 on Windows.
After I've created and deployed a Request/Response service (either RS or SOAP Invocation Service) if I go to the ESB Console and click on "Apply" in say the Definition tab, my service turns into a One Way service.
This then causes null pointer exceptions when I run my process, as you might expect.
If I redeploy from JDev and leave the "Apply" button alone I'm back in business.
Is this something that anyone else has had a problem with?

Hi.
I would recommend you to install version 10.1.3.3 of SOA Suite
http://download.oracle.com/otn/nt/ias/10133/ias_windows_x86_101330.zip
http://download.oracle.com/otn/linux/ias/10133/ias_linux_x86_101330.zip
Also, use the JDev 10.1.3.3
http://www.oracle.com/technology/software/products/jdev/htdocs/soft10133.html
They are supposed to be much more stable.
After using the new release, let us know if you still run into this problem.
Denis

How to implement request/response domain in JMS

hi friends,
I need help regarding implementing request/response domain
in jms.please help me.

See the TopicRequestor and QueueRequestor helper classes in the JMS API.
FWIW there's a POJO based request/response implementation using JMS here...
http://lingo.codehaus.org
you might find the source code useful as it does efficient request/response in a highly concurrent way using JMS under the covers.
James
http://logicblaze.com/

SPML request/response logging

Similar Messages

Maybe you are looking for