Spool error for background job

Hi All,
I have scheduled one job in sap for a report.I have made a distribution list via tcode SO01.
I have given this distribution list to the SPOOL RECEPIENT section in SM 36.
The job is running successfully but is giving the following error and not sending emails to the distribution list.
The error is :-
"Spool list of step 1 could not be sent due to error 7".
Does anybody has any idea about this error?
Please help its a production issue.
Thanks in advance
Vivekanand Meghmala

Look at SAP note : 760838
Symptom
Background job spool lists are not sent.
Other terms
RSBTCRTE, RSPO_SPOOLJOB_TO_OFFICE, SO_DOCUMENT_SEND_API1
Reason and Prerequisites
1. The jobs in question have recipient references in table TBTCO but these have no equivalent in the Business Object Repository.
2. An error occurs when sending in the spool or in the Sapconnect layer.
Solution
This note does not provide a direct solution to the problem but it does provide a source code enhancement that you can use to create more trace information about the cause of the error. When you copy and execute a job with spool list recipients, trace messages are output when errors occur.
After implementing the correction instructions, use transaction SE91 to create the following message:
Message class: BT
Number: 347
Text: Spool list of step &1 could not be sent due to error &2.
In detail, the error numbers mean:
1 = Spool request does not exist (or no longer exists)
2 = Spool request does not contain any data
3 = Empty page area selected
4 = No authorization to send the request
5 = Access to the spool request is not possible
6 = Read error in the Temse layer
7 = Spool request could not be sent (sending problem)
8 = Incorrect request type
9 = Other

Similar Messages

Spool list for Background job

Dear all ,
The background job is already scheduled daily (PR NOT PROCESSED BY PURCHASING) , isn't possible to check the list of users is assigned in the spool list recipiant, I have checked spool list , but its shows only one id ....
how to check the list of Spool users ...any alternate option ?
Kindly advise
Regards

Hi ,
I have created a distribution list and i have included the email ids also .
any other activation is required for Distribution list ?
how the background job is sending a report to Distribution list or i have to assign a distribution list to Background job .
Kindly suggest
Regards

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

Alv show in report but when see in spool (after run background job) there i

my program have some error when i run result alv show in report but when see in spool (after run background job) there is no data, (other program can see result in spool)
Please help
here is some example of my program
********************************declare internal table*****************************
internal table output for BDC
data : begin of t_output occurs 0,
bukrs type anla-bukrs,
anln1 type anla-anln1,
anln2 type anla-anln2,
zugdt type anla-zugdt,
result(70) type c,
end of t_output.
*****get data from loop********************************
loop at t_anla.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_anla-anln1
         IMPORTING
              OUTPUT = t_anla-anln1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_anla-anln2
         IMPORTING
              OUTPUT = t_anla-anln2.
check record is correct or not
    select single bukrs anln1 anln2 zugdt
    into w_output
    from anla
    where bukrs = t_anla-bukrs and
    anln1 = t_anla-anln1 and
    anln2 = t_anla-anln2
   zugdt = '00000000'
if record is correct
    if sy-subrc = 0 and w_output-zugdt = '00000000'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Yes : this asset can delete'.
      append w_output to t_output.
if record is not correct
    elseif sy-subrc = 0 and w_output-zugdt <> '00000000'.
there is error record this asset have value already
      v_have_error = 'X'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Error : this asset have value already'.
      append w_output to t_output.
    else.
there is error record this asset donot exist in table anla
      v_have_error = 'X'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Error : this asset doest not exist'.
      append w_output to t_output.
    endif.
*end of check record is correct or not
    clear w_output.
endloop.
******************************show data in ALV***************************************************
show data from file in ALV
perform display_report_ALV.
*&      Form display_report_ALV
form display_report_ALV.
DATA: LT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
      LT_EVENTS TYPE SLIS_T_EVENT,
      LV_REPID LIKE SY-REPID.
PERFORM ALV_DEFINE_FIELD_CAT USING LT_FIELD_CAT.
PERFORM ALV_HEADER_BUILD USING T_LIST_TOP_OF_PAGE[].
PERFORM ALV_EVENTTAB_BUILD USING LT_EVENTS[].
LV_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM = LV_REPID
            IT_FIELDCAT        = LT_FIELD_CAT
            I_SAVE             = 'A'
            IT_EVENTS          = LT_EVENTS[]
       TABLES
            T_OUTTAB           = t_output
       EXCEPTIONS
            PROGRAM_ERROR      = 1
            OTHERS             = 2.
IF SY-SUBRC NE 0.
    WRITE: / 'Return Code : ', SY-SUBRC,
      'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
endform.
*&      Form alv_define_field_cat
      text
     -->P_LT_FIELD_CAT text
FORM ALV_DEFINE_FIELD_CAT USING TB_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: WA_FIELDCAT LIKE LINE OF TB_FCAT,
    LV_COL_POS TYPE I.
DEFINE FIELD_CAT.
    CLEAR WA_FIELDCAT.
    ADD 1 TO LV_COL_POS.
    WA_FIELDCAT-FIELDNAME = &1.
    WA_FIELDCAT-REF_TABNAME = &2.
    WA_FIELDCAT-COL_POS = LV_COL_POS.
    WA_FIELDCAT-KEY = &3.
    WA_FIELDCAT-NO_OUT = &4.
    WA_FIELDCAT-REF_FIELDNAME = &5.
    WA_FIELDCAT-DDICTXT = 'M'.
    IF NOT &6 IS INITIAL.
      WA_FIELDCAT-SELTEXT_L = &6.
      WA_FIELDCAT-SELTEXT_M = &6.
      WA_FIELDCAT-SELTEXT_S = &6.
    ENDIF.
    WA_FIELDCAT-DO_SUM = &7.
    WA_FIELDCAT-OUTPUTLEN = &8.
    APPEND WA_FIELDCAT TO TB_FCAT.
END-OF-DEFINITION.
FIELD_CAT 'BUKRS' 'ANLA'     'X' '' 'BUKRS' 'Company Code' '' ''.
FIELD_CAT 'ANLN1' 'ANLA'     'X' '' 'ANLN1' 'Asset Number' '' ''.
FIELD_CAT 'ANLN2' 'ANLA'     'X' '' 'ANLN2' 'Asset Sub Number' '' ''.
FIELD_CAT 'ATEXT'   'T5EAE'     'X' '' 'ATEXT' 'Result' '' ''.
FIELD_CAT 'RESULT' ''     'X' '' 'RESULT' 'RESULT' '' ''.
ENDFORM.                    " alv_define_field_cat

Hi,
Check this code..
FORM display_report_alv.
DATA: lt_field_cat TYPE slis_t_fieldcat_alv,
lt_events TYPE slis_t_event,
lv_repid LIKE sy-repid.
PERFORM alv_define_field_cat USING lt_field_cat.
PERFORM alv_header_build USING t_list_top_of_page[].
PERFORM alv_eventtab_build USING lt_events[].
lv_repid = sy-repid.
IF sy-batch EQ 'X'. ----> " System Field for Backgroud..if Background use list display
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program = lv_repid
        it_fieldcat        = lt_field_cat
        i_save             = 'A'
        it_events          = lt_events[]
      TABLES
        t_outtab           = t_output
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program = lv_repid
        it_fieldcat        = lt_field_cat
        i_save             = 'A'
        it_events          = lt_events[]
      TABLES
        t_outtab           = t_output
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
ENDIF.
IF sy-subrc NE 0.
    WRITE: / 'Return Code : ', sy-subrc,
    'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
ENDFORM.                    "display_report_ALV

Job failure ( report RFFDKU00 scheduled for background job)

Hi Experts,
    When iam scheduling the report RFFDKU00 for background job. Job is getting cancelled with status "ABAP/4 processor: DBIF_RSQL_SQL_ERROR" . when iam obesrving this job it is going to dump at this select query
"     select ausbk belnr gjahr bzkey buzei
033370                  from vbsegs into table t_vbsegsfields
033380            where bukrs in r_bukrs
033390            and not ( fdlev = space
033400                  and fdgrp = space
033410                  and fdtag = init_date
033420                  and fdwbt = 0 )
033430            and not saknr in r_cm_sk   "
Can anyone helpme to deal with this issues ,
thanks in advance,
Kranthi

note 167301 might help.

Function module for background jobs email

hi abaper's
i hace to create a function module for background jobs this function module have to send an email automatically when a background job is assigned or processed in background.
thnks n regards
pardeep kumar

hi dear
open this site
https://weblogs.sdn.sap.com/pub/wlg/781. [original link is broken] [original link is broken] [original link is broken]
<removed by moderator>
Edited by: Mike Pokraka on Aug 8, 2008 12:48 PM

We are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

we are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

Moderator Action:
You already asked this question, two days earlier.
https://forums.oracle.com/thread/2585158
Stay with your original post. Deliberate multiple posting is the same as spamming the forums.
This new post is locked.

SQL trace for Background jobs

Hi
Can anyone suggest how to find the SQL trace for background jobs.
Thanks in advance.
Regards
D.Vadivukkarasi

Hi
Check the transaction ST05.
Plz Reward Points if helpful

Date and time for background job

Hi,
I am creating a program with out selection screen . This program runs based on date and time . so I need to create a table
with date and time fileds.
Program runs based on FROM DATE FROM TIME TO DATE TO TIME....... FROM DATE and FROM TIME will get it from ztable and TO DATE & TO TIME values as SY-DATUM & SY-UZEIT. In the end I will update sy-datum and sy-uzeit values in the custom table to get the values ( Use it for from date from time ) for next run of the program.
This program is mainly used for background job so how do we get the values of from date and from time for the first run of the program ? how do we update the latest date and time details by deleting old date and time details.
Thanks ,
Vinay.
Edited by: Vinay parakala on Apr 22, 2010 9:18 AM

First of all, I'll suggest to maintain TVARVC instead of doing it in custom table unless you need a complete log.
As per my understanding, you are trying to fetch some records based on the time period(Delta loads).
So, you will do an initial run to load the complete data then you will run it for time periods. For example,
1st Load- 01/01/1991(earliest date possible) - today's date say 03/22/2010
2nd load- 03/22/2010 - today's date
so on............
You have to move the to date values to from date values and to date value needs to be updated by the latest one for each load.
Do you have any dependency on background job? Please let me know if my understanding is correct or specify your requirement in detail.

Same spool number for same job on mutilple days

Hi all,
We have daily Batch job which runs at 9:00 PM for a 1 variant and with 2 variant after first job is done.
On 11/05 we have got one spool number 845411 for the spool and on the 11/09 for the same job we got the same spool number for 2 jobs , and the data is also showing as 11/05 only and the spool creation date is showing as 11/05 and modified on 11/10...
This is happening for only 1 batch job, we have checked the other jobs all are fine with different spool #, we have checked spool number range and every thing is fine.
Please suggest what can be the reason for this scenario...
Thanks,
Subhash.G

Hi Subhash,
Check the print parametes of the job, can be seen under steps --> double click on program --> print properties. There we have option to select new spool number.
So every time the job runs it will have a new spool number. Hope this helps.
Regards
Sushant

Variants for background jobs

You need to schedule and automate batch jobs in an organisation. There will be multiple variants and multiple steps within same batch jobs. The variants are date dependent and needs to change every day. You need to automatically change the variants every day and schedule the jobs. Also check for the failures in the jobs. Apart from that Once the jobs in one server example : R/3 server ends the jobs in BW servers should be triggered automatically. Explain all steps with proper T codes and also provide a dry run example. Also provide all the table used for the variants purpose.
Please help on this,thanks
Narendra

Hi Narendra,
The background jobs are scheduled depending on the requirement with specific variants which are both date specific and even specific sometimes. These variants are created for the programs or reports which are run in the background job ,These variants are stored in VARID table for client specific variants and
VARID_CI for client independent. For most of the times all these jobs are maintained in some job scheduling tools so that they automatically inform about job failures and processes can be automated.In our organisation we use UC4 for background job schedulign and it controls the process as you are looking for.
Please award points accordingly
With Regards,
Junaid
Message was edited by:
muhammed junaid

Regarding Variants for Background jobs

Hi Folks
Can you please let me know the procedure how we can create the variants for Background jobs.
Points are assured for correct answers.
Regards,
kumar

Hi Sree Ram,
Check this info.
If you have any selection screen parameters for your program you need to enter the values for those fields in runtime. So, if you schedule your program in background to execute then there is no one to do this job. Here comes the concept of Variant.
With variant you define what are the selection field values in the runtime. During runtime the program picks this values and runs the program.
When you execute your program which has selection fields, you enter the values and then you click on 'GO TO ' tab and 'SAVE AS VARIANT'.
When you schedule your program in background, give this variant also. Then it will run automatically.
Hope this resolves your query.
Reward all the helpful answers.
Regards

Userexit or BADI for program *RMMRP000* for background job

Hi,
We are scheduling background job for MRP through SM36 using program RMMRP000 or Through Transaction MDBT (MDBT is calling program RMMRP000) which creates PR (through background job).
I want to default one field in PR (PO Price field in valuation tab in PR default to gross) using any userexit or BADI.
Can any body suggest me userexit or BADI for program RMMRP000 for background job
Regards.

Hi,
1. The below are the List of Userexit for this MDBT t.CODE.
2. But i dont see any one helping to resolve your issue.
3. May be you should lookg at the Userexit for me21n or relevant Purhcase requisition creation transaction.
reg
dsk

Error in background job for VT04 - RV56TRGN

Hello!
The selection criteria is fine - we want every shipping point to be used to create every variant. We also have TPPs mirroring the plant codes. The job log sepects some deliveries which are good and tries to process them - the endlogue is it found X no. of deliveries, processed them but did not write the shipment to the data base. Digging further, it shows the error - <u>the system cound not determine the TPP for the plant in the delivery line item.</u>
When I look at the variant, it doesn't talk of the TPP at all - only the shipping point and all the other criteria mainly associated with the deliveries and their statuses. I am wondering how the system knows which TPP to use for each shipping point when no TPP is assiged in the variant? Is this a default configuration I am missing? Or something else? Appreciate any leads...
Thanks a lot.

PS: In addition to creating the shipments, we also need to make their status to 'complete' in the background job as it is a purely non value added activity for us but we need the shipments for the cost documents. Any ideas how I can go about that?
Thanks.

Spool list is not getting created for background job

I am creating background job using JOB_OPEN and then submitting my z-report using submit statement and then closing job using JOB_CLOSE. for this job is getting creating in sm37 and also gets finished but it does not create spool list showing output.
Any idea how to do this?
Thanks in advance.

DATA: lv_jobname TYPE tbtcjob-jobname,
        lv_jobcount TYPE tbtcjob-jobcount,
        lv_variant TYPE variant,
        wa_var_desc TYPE varid,
        wa_var_text TYPE varit,
        it_var_text TYPE TABLE OF varit,
        it_var_contents TYPE TABLE OF rsparams.
REFRESH: it_var_contents, it_var_text.
CLEAR: wa_var_desc, wa_var_text.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
      curr_report     = sy-cprog
    TABLES
      selection_table = it_var_contents
    EXCEPTIONS
      not_found       = 1
      no_report       = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CONCATENATE sy-datum sy-timlo INTO lv_variant.
wa_var_desc-mandt       = sy-mandt.
wa_var_desc-report      = sy-cprog.
wa_var_desc-variant     = lv_variant.
wa_var_desc-transport   = 'F'.
wa_var_desc-environmnt = 'B'.
wa_var_desc-version     = '1'.
wa_var_desc-protected   = 'X'.
wa_var_text-mandt = sy-mandt.
wa_var_text-langu = sy-langu.
wa_var_text-report = sy-cprog.
wa_var_text-variant = lv_variant.
lv_jobname = lv_variant.
CONCATENATE 'Batch Job Variant -'(006)
              sy-uname INTO wa_var_text-vtext.
APPEND wa_var_text TO it_var_text.
Create the varaint for the back ground job.
CALL FUNCTION 'RS_CREATE_VARIANT'
    EXPORTING
      curr_report               = sy-cprog
      curr_variant              = lv_variant
      vari_desc                 = wa_var_desc
    TABLES
      vari_contents             = it_var_contents
      vari_text                 = it_var_text
    EXCEPTIONS
      illegal_report_or_variant = 1
      illegal_variantname       = 2
      not_authorized            = 3
      not_executed              = 4
      report_not_existent       = 5
      report_not_supplied       = 6
      variant_exists            = 7
      variant_locked            = 8
      OTHERS                    = 9.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Open the job.
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname          = lv_jobname
    IMPORTING
      jobcount         = lv_jobcount
    EXCEPTIONS
      cant_create_job = 1
      invalid_job_data = 2
      jobname_missing = 3
      OTHERS           = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
submitt the job in background mode.
CALL FUNCTION 'JOB_SUBMIT'
    EXPORTING
      authcknam               = sy-uname
      jobcount                = lv_jobcount
      jobname                 = lv_jobname
      report                  = sy-repid
      variant                 = lv_variant
    EXCEPTIONS
      bad_priparams           = 1
      bad_xpgflags            = 2
      invalid_jobdata         = 3
      jobname_missing         = 4
      job_notex               = 5
      job_submit_failed       = 6
      lock_failed             = 7
      program_missing         = 8
      prog_abap_and_extpg_set = 9
      OTHERS                  = 10.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
close the job.
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
      jobcount             = lv_jobcount
      jobname              = lv_jobname
      strtimmed            = 'X'
    EXCEPTIONS
      cant_start_immediate = 1
      invalid_startdate    = 2
      jobname_missing      = 3
      job_close_failed     = 4
      job_nosteps          = 5
      job_notex            = 6
      lock_failed          = 7
      invalid_target       = 8
      OTHERS               = 9.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this will be helpful..

Spool error for background job

Similar Messages

Maybe you are looking for