Spotify Debian package for Jessie(testing)
The package that is on spotify repository is not working in Debian Jessie, this is happening because Debian Jessie has libssl1.0.0 and spotify works with libssl0.9.8. I removed the dependency for ssl from the package and i add to data folder the compilied files of libssl and libcrypto. I just sharing this package for other people that using Jessie and have the same problem, until the problem solved officialy from spotiy.
Download the package
http://83.212.107.72/spotify-client_0.9.4.183.g644e24e.428-1_amd64.deb
Install the spotify-client(is only for 64bit)
dpkg -i spotify-client_0.9.4.183.g644e24e.428-1_amd64.deb
The next command is needed if you have missing dependencies
sudo apt-get install -f (maybe you have to install dependencies manualy)
Thanks alot for this solution miza, I recall having to fix this myself manually a few times and it's not fun. Just wanted to let you know that this was greatly appreciated.
And I also appreciate jooon replying to this thread and I'd also like to add that I very much appreciate a Linux client and I can deal with using workarounds like this and having the software slightly out of date, as long as it's still usable :)
Thanks again!
Similar Messages
-
Remove init.d debian script for AUR package
I would like to make a new package for HQplayer network audio daemon.
I have made this PKGBUILD (where init.d is removed from debian package and a new systemd service is added).
Is this correct?
pkgname=hqplayer-network-audio-daemon
_debpkgver=2.0.5
pkgver=$_debpkgver
pkgrel=1
pkgdesc="Signalyst Network Audio Daemon"
arch=('x86_64')
url="http://www.signalyst.com/"
license=('Proprietary')
depends=('alsa-lib')
source=("http://www2.signalyst.com/bins/naa/debian_wheezy/networkaudiod_2.0.5-20_i386.deb" '[email protected]')
sha256sums=('369bc3379b11fb05813567d47278f8f24711bb5240269ec725c8f17adecf1a21' '083a3080512283cf43930ad54749cee14a21bed5fc1596e63cce4482e1aeed96')
package() {
cd "$srcdir"
bsdtar xf data.tar.gz -C "$pkgdir"
install -Dm644 "[email protected]" \
"$pkgdir/usr/lib/systemd/system/[email protected]"
rm -r "$pkgdir/etc/init.d"Sorry but it is not an "opaque binary from an unknown source": network audio daemon is made by Jussi Laako, a very well known expert in audio digital conversion, known on the net by "miska" (see the posts at computeraudiophile.com for example).
And yes, it is working very well. HQplayer play an audio file in one computer and network audio daemon reproduce it in another. There is a version of HQplayer for linux that will work for 30 minutes without buying the licence.
I will make a package also of HQplayer as soon as possible, since the network daemon will not work without it
For the licence I guess that I could change to 'unknown'
Here is a copy of debian control file:
Package: networkaudiod
Version: 2.0.5-20
Architecture: i386
Maintainer: Jussi Laako <[email protected]>
Installed-Size: 319
Pre-Depends: debconf
Depends: libasound2 (>= 1.0.16), libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), debconf (>= 0.5) | debconf-2.0
Priority: extra
Homepage: http://www.signalyst.com/consumer.html
Description: Signalyst Network Audio Daemon
Signalyst Network Audio Daemon is a light weight server for asynchronous
network audio stream playback. It is an implementation of Signalyst
Network Audio Adapter protocol.
Last edited by hifi25nl (2014-06-19 08:11:26) -
Firefox needs a Debian installer package for version 4 - it should be as easy to install as Chrome
While Ubuntu is slow in providing access to Firefox 4 in their repositories, it would seem appropriate for Mozilla to have a Debian package installer for Firefox 4 that the user can access on a timeline enjoyed by everyone else.
What is the delay??I think you may have pasted the wrong thing into the Description.
To try and resubmit a pending report (for example if you lost your internet connection):
#Go to about:crashes in the location bar
#Click the latest report link to resubmit it
If there isn't a pending crash report listed, I'm afraid you may be out of luck for that crash report. -
How to select test cases efficiently for a test package?
Dear experts,
I would like to ask you if you have found a way administer how to assign test cases to test packages and test packages to testers. For regression tests this assignment remains relatively stable (often the key users).
Do you know a way to administer this within the solution manager - or do you recommend the old excel table.Hello Ragu!
Thank you for your answer! My question was regarding the organisational side, I didn't get this clear.
I know how to generate a test package and how to assign a tester to a test package but where do I get the information which test packages I need and which tester to assign to which package.
Maybe a good option is to assign the tester as a team member on the process step level. Thus the assignments can be listed with SOLAR_EVAL using "Assignments / Test Cases" with option "Display Team Members". This list would help to generate the test packages. The selection of the test cases for the test package has do be done manually because there seems to be no filter for team members.
Regards,
Martin -
How to install only selected version of packages for stability ?
i want a stable distro. but i also dont want leave arch and its aur. so i want to install only stable version for all packages. the version number can be know from http://ftp.slackware.com/pub/slackware/ … CKAGES.TXT or http://packages.debian.org/stable/allpa … mat=txt.gz or own expieriance. so it would make my arch more stable.
right now i can think of one way to achive this, by create another repositery and disabling all others including core extra community etc.
so which one is more feasible different repositery or different, stable distro (may be slack).
thanksHow do you measure that stability?
in infinitely stable system, binary will only do what they are supposed to do. thats what is desirable. one way to find out the stability is testing for a period of time. and i heard slackware and debian stable are most tested distro so thats why i chose their packages.txt.
i am ignoring their interference with upstream packages and assuming it has zero effect on stability. however feel free to shatter my assumption.
Arch is a rolling release; it is predicated on moving with upstream.
it does not matter the only requirement is that the required version of the pacages should exist somewhere. with the proposed changes it would not be rolling anymore, at least apparantly.
Depends how much work you want to put into it. I expect that in turn depends on the issues you believe have been caused by arch's alleged lack of stability, and you haven't said anything about them.
Given your apparent determination to stay with Arch, it's odd that you included the option to change distro in your question, but it's the option I would recommend to you. If you decide to persist with Arch, here's a previous attempt to inspire you.
the point is i dont have to do much work. most of the work is testing, which is already done by big distros like slack, debian. i am just using their knowledge of most stable packages and applying that in arch. the only work i have to do is to automate the whole process of changing the database file.
yes i am facing issue with my current arch, xfce-panel is crashing. there is fixed bitmap in my top left corner etc. but i dont want to spend my time debugging these problems. but i do want them dissappeared, hopefully the proposed change would do that.
i think i am moving to slackware but without leaving arch. the only difference between them that matters is slackware is well tested distro and i think i am bringing that quality in my arch.
the difference between archserver and arch is archserver provides more stability but not more than slackware. so i think i am not intrested in archserver. -
Suggestions requested for Unit Testing process and build processes.
Hi All,
We are using WebLogic WorkShop 8.1 SP2 to build our WebApp. One thing I am trying
to get together is a "Best Practises" list for aspects of WorkShop developement,
particularly Unit Testing, Continous Build methodology, source control management
etc.I have been through the "Best Practises Guide" that comes in WorkShop help,
but it doesnt address these issues.This could help us all for future projects.
1)Could anyone give pointers on how to perform Unit Testing using either JUnit/JUnitEE
in the WorkShop realm, given that Controls cannot be accessed directly from PO
Test classes.
2)For a project of size say 5 developers ,does it make sense to have a nightly
build using tools like CruiseControl?We use CVS for our source control and its
working out pretty well, but given that we currently have no Unit Tests that can
be run after the build and that can provide some reports on what broke/what didnt?
I am sure we all would appreciate any suggestions and more questions on this topic.
Thanks,
Vik.Hi, Chris,
can you perhaps explain your solution in greater detail. I am really curious to
find a way to test controls.
"Chris Pyrke" <[email protected]> wrote:
>
I have written (well it's a bit of a dirty hack really) something that
lends itself
to the name ControlTest (it unit tests controls). Its a blend of Junit
and Cactus
with some of the source of each brutalised a bit to get things to work
(not much
- it was a couple of hours work, when I was supposed to be doing something
else).
To write a control test you code something like...
package com.liffe;
import com.liffe.controlunit.ControlTestCase;
import controls.Example;
public class TestExample extends ControlTestCase
private Example example = null;
public void setUp() {
example = (Example)getControl("example");
public void testExample() {
this.assertNotNull(example);
String result = example.getData();
assertEquals(result, "Happy as Larry");
Other tasks required to set up a test are creating a web project with
a jpf which
needs some cut and paste code (14 lines) in its begin method and a jsp
which is
also cut and paste (5 lines). (ie create a standard web project and paste
in 2
pieces of code)
In the web project you need to create a control (A) with an instance
name of controlContainer.
(if it's called something else the pasted in code will need changing
to reflect)
In this control you need to put an instance of TestContainerImpl and
any controls
that need testing.
You then need to add a method to the control (A) that looks like…
* @common:operation
public String controlTestRun(String theSuiteClassName, boolean xsl)
container.setControl("example", example);
return container.controlTestRun(theSuiteClassName, xsl);
You need to call container.setControl for each control being tested and
the object
'container' is the instance name of the TestContainerImpl that was put
in.
There are 4 jars (junit, cactus etc) that go in the library. You will
also need
the ControlUnitBase project (or maybe just it's jar).
To use you call a URL like:
http://localhost:7001/TestWeb/Controller.jpf?test=com.liffe.TestExample
TestWeb is the name I gave to my web project - this will be different
for each
test project
com.liffe.Example is the class above and will therefore be different
for each
test case.
You can also call
http://localhost:7001/TestWeb/Controller.jpf?test=com.liffe.TestExample&xsl=true
(Note the extra &xsl=true) and the browser will (if it can) render it
more prettily.
This seems to do the job quite nicely, but there are several caveats
I would hope
someone from bea would be able to address before I start using it widely.
1) To access the control you need to create it (eg as a subcontrol in
the control
(A) above.
To get it into the test case you need to pass it round as an Object (can't
return
Control from a control operation). As it's being passed around among
Java (POJO)
classes I'm assuming that control remains in the control container context
so
this is OK. It seems to work and the Object is some form of proxy as
any control
seems to be reproxied before the control is invoked from the test case.
2) If I'm testing controls called from a JPD then they either need to
be in a
control project (and my test cases called from a Web Project) which makes
for
a large increase in project numbers (we already have this and are trying
to resist
it) To avoid this - as a process project is a brain damaged web project
I simply
perform some brain surgery and augment the process project with some
standard
files found in any old web project. this means I can call the test JPF
from a
browser. This seems nasty, is there a better way?
3) I would like to be able to deliver without the test code. At the worst
the
code can be in place but must be inacessible in a production environment.
I don't
know how best to do this - any suggestions (without creating lots of
projects,
or lots of manual effort)
If anyone has read this far I would ask the question does this seem like
the kind
of thing that would be useful?
Hopefully a future version of workshop will have something to enable
unit testing
and this hacking will be unnecessary.
Could someone from BEA tell me if this is a dangerous way to do things?
Chris
"vik" <[email protected]> wrote:
Hi All,
We are using WebLogic WorkShop 8.1 SP2 to build our WebApp. One thing
I am trying
to get together is a "Best Practises" list for aspects of WorkShop developement,
particularly Unit Testing, Continous Build methodology, source control
management
etc.I have been through the "Best Practises Guide" that comes in WorkShop
help,
but it doesnt address these issues.This could help us all for future
projects.
1)Could anyone give pointers on how to perform Unit Testing using either
JUnit/JUnitEE
in the WorkShop realm, given that Controls cannot be accessed directly
from PO
Test classes.
2)For a project of size say 5 developers ,does it make sense to have
a nightly
build using tools like CruiseControl?We use CVS for our source control
and its
working out pretty well, but given that we currently have no Unit Tests
that can
be run after the build and that can provide some reports on what broke/what
didnt?
I am sure we all would appreciate any suggestions and more questions
on this topic.
Thanks,
Vik. -
Problem with Linus Ubuntu 7.04 and Oracle-Xe debian package
Hi all,
Installed Oracle 10g XE on my Ubuntu 7.04 using universal Debian Package : oracle-xe-universal_10.2.0.1-1.0_i386.deb. No problem during the installation . After finished the installation, I configured the database to use port 6000 and its password (Listener port set to default).
But when I tried to access the database home page using "http://127.0.0.1:6000/apex", it cannot be accessed. Then I tried to verify my database server using /etc/init.d/oracle-xe status and here's the output:(before it, I make user the database was realy online by typing /etc/init.d/oracle-xe start)
###########################333###
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 09-AUG-2007 22:45:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=wks-082)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 110: Connection timed out
then I tried to open the log in /usr/lib/oracle/xe/app/oracle/admin/xe/bdump/alert_XE.log and here is the output
Thu Aug 9 14:54:14 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Thu Aug 9 14:54:27 2007
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
Thu Aug 9 14:54:33 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7532.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7532
Thu Aug 9 14:54:35 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Thu Aug 9 14:54:46 2007
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
Thu Aug 9 14:54:51 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7551.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7551
Thu Aug 9 14:54:53 2007
Are there anyone who can help me? I really have no idea since I'm a newbie here, both linux and oracle. Any hint are welcome, thanks in advance.
Regards,
Rudi SadriaThx for the help, I already verify the /etc/hosts and these are the output:
127.0.0.1 localhost
127.0.0.1 wks-082
127.0.0.1 localhost.localdomain localhost localhost.domain
127.0.0.1 hostname hostname.domain
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
I check the listener status and here's the output:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 10-AUG-2007 15:14:45
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 10-AUG-2007 15:14:39
Uptime 0 days 0 hr. 0 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=wks-082)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
and here's the alert_XE.log
Fri Aug 10 15:30:59 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 41943040
__large_pool_size = 0
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 96468992
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
PMON started with pid=2, OS id=7328
PSP0 started with pid=3, OS id=7330
MMAN started with pid=4, OS id=7332
DBW0 started with pid=5, OS id=7334
LGWR started with pid=6, OS id=7336
CKPT started with pid=7, OS id=7338
SMON started with pid=8, OS id=7340
RECO started with pid=9, OS id=7342
CJQ0 started with pid=10, OS id=7344
MMON started with pid=11, OS id=7348
MMNL started with pid=12, OS id=7350
Fri Aug 10 15:31:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Aug 10 15:31:01 2007
ALTER DATABASE MOUNT
Fri Aug 10 15:31:01 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Fri Aug 10 15:31:01 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
and then I open the SQL* plus and type some command
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 10 15:32:38 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
Connected.
SQL> select status from v$instance
2 ;
STATUS
STARTED
But I'm still cannot accessed my "http://localhost:6000/apex". Are there any possibilities that my browser block it? or I need to change the port?
Thx a lot for your help
Regards,
Rudi Sadria -
100 packages for 100 seperate files in SSIS 2012---------
Hi,
I am new to this Microsoft Forum.
I have worked for last 3 years in MSBI(mainly SSIS and SSAS). Recently I have joined a new company and been assigned to new project. Here we have to first build Operational Data Stores from 50 source files (which is built-100 tables). then from this we need
to pull data in Data Warehousing and later Cube.
My question is: My architect telling me to create 100 separate packages for each source file from source to staging (one to one source to staging mapping) and connect it through master package. then when we pull data from staging to Dev. there would
be 30 destination tables so 30 packages!!
I have not designed any ETL in this way.
the files can be segregated as per daily, monthly, weekly and quarterly, so I would have created daily, monthly and so on package. In each package I would have included source to staging and staging to development phase.
His points are, testing team can work separately on each package, multiple developers can work on separate files at the same time. can anyone tell me how feasible the design is.....advantage/disadvantage... But Would it be good to handle
100 odd packages for one database where I can achieve this by creating 6 packages.
thanks, RimsHi Rims,
Personally, I agree with your architect's opinion from the perspective of "multi-developer" as well as "unit test your SSIS packages".
If your main concern of creating dedicated SSIS packages is time consuming, I would recommend you to have a look at BIML / Mist. You can quickly get the idea from this YouTube video: https://www.youtube.com/watch?v=RKi2zIoFUAg
Basically, BIML / Mist can help you to build a SSIS code generator to loop through your database objects and generate SSIS packages on the fly. If you take this approach, it would be faster to create 100 SSIS packages than 6 customized SSIS packages.
Regards,
George Qiao -
Is the Adobe Air Packager for Desktop or Web Application Apps?
Is the Adobe Air Packager for desktop or web applications?
I'm testing the RoboHelp Adobe Air packager and noticed that
it produces an *.exe file that must be launched locally. This makes
it seem like it's only an alternative to the *.CHM format for
desktop applications?
Is there a way to link to webhelp topics packaged using Adobe
Air to provide context-sensitive help (CSH) for a web application
running on a remote server? Supposedly the Adobe Air packager has
CSH capabilities, but I've found zero documentation on how to set
this up.Hi Dirk.
Peter Grainge has an article on Air's use on his
site. -
BPF: Run Specific Package vs Run Specific Package for PackageExecution
Simple question:what is the difference?
I used Run Specific Package in the BPF setup, but the package does not launch upon testing
When I use Run Specific Package for PackageExecution it works...Hi Nilanjan,
Can you through some more details or the difference between Run Specific Package & Run Specific Package for PackageExecution.
Thanks in advance.
Raghu B.S. -
BPC10 - Data manager package for dimension data export and import
Dear BPC Expers,
Need your help.
I am trying to set up a data manager package for first time to export dimension - master data from one application and import in another application ( both have same properties) .
I created a test data manager package from Organize > add package > with process chain /CPMB/EXPORT_MD_TO_FILE and Add
In the advance tab of each task there are some script logic already populated. please find attached the details of the script logic written under each of the tasks like MD_Source, concvert and target .
I have not done any chnages in the script inside the task .
But when i run the package , I have selected a dimension 'Entity' but in second prompt ,it ask for a transformation file , and syatem autometically add the file ... \ROOT\WEBFOLDERS\COLPAL\FINANCE\DATAMANAGER\TRANSFORMATIONFILES\Import.xls
I have not changed anything there
in the next prmpt , it ask for a output file ..and it won't allow me enter the file name .....i
Not sure how to proceed further.
I shall be greatfull if someone guide me from your experiance how to set up a simple the data manager package for master data export from dimension . Should I update the transformation file in the script for import file and output file in the advance tab. how and what transformation file to be created and link to the data manager package for export / import .
What are the steps to be executed to run the package for exporting master data from dimension and import it another application .
Thanks in advance for your guidance.
Thanks and Regards,
Ramanuj
=====================================================================================================
Detals of the task
Task : APPL_MD-SOURCE
(DIMENSIONMEMBER, %DIMENSIONMEMBERS%, "Please select dimension", "Please select members", %DIMS%)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
(RADIOBUTTON,%ADDITIONINFO%,"Add other information(Environment,Model,User,Time)?",1,{"Yes","No"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%TEMPNO2%,%INCREASENO%)
(/CPMB/APPL_MD_SOURCE,SELECTION,%DIMENSIONMEMBERS%)
(/CPMB/APPL_MD_SOURCE,OUTPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,INPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/EXPORT_MD_CONVERT,SUSER,%USER%)
(/CPMB/EXPORT_MD_CONVERT,SAPPSET,%APPSET%)
(/CPMB/EXPORT_MD_CONVERT,SAPP,%APP%)
(/CPMB/EXPORT_MD_CONVERT,OUTPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,INPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,FULLFILENAME,%FILE%))
(/CPMB/FILE_TARGET,ADDITIONALINFO,%ADDITIONINFO%))
Task : EXPORT_MD_CONVERT
(DIMENSIONMEMBER, %DIMENSIONMEMBERS%, "Please select dimension", "Please select members", %DIMS%)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
(RADIOBUTTON,%ADDITIONINFO%,"Add other information(Environment,Model,User,Time)?",1,{"Yes","No"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%TEMPNO2%,%INCREASENO%)
(/CPMB/APPL_MD_SOURCE,SELECTION,%DIMENSIONMEMBERS%)
(/CPMB/APPL_MD_SOURCE,OUTPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,INPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/EXPORT_MD_CONVERT,SUSER,%USER%)
(/CPMB/EXPORT_MD_CONVERT,SAPPSET,%APPSET%)
(/CPMB/EXPORT_MD_CONVERT,SAPP,%APP%)
(/CPMB/EXPORT_MD_CONVERT,OUTPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,INPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,FULLFILENAME,%FILE%))
(/CPMB/FILE_TARGET,ADDITIONALINFO,%ADDITIONINFO%))
Task : FILE_TARGET
(DIMENSIONMEMBER, %DIMENSIONMEMBERS%, "Please select dimension", "Please select members", %DIMS%)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
(RADIOBUTTON,%ADDITIONINFO%,"Add other information(Environment,Model,User,Time)?",1,{"Yes","No"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%TEMPNO2%,%INCREASENO%)
(/CPMB/APPL_MD_SOURCE,SELECTION,%DIMENSIONMEMBERS%)
(/CPMB/APPL_MD_SOURCE,OUTPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,INPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/EXPORT_MD_CONVERT,SUSER,%USER%)
(/CPMB/EXPORT_MD_CONVERT,SAPPSET,%APPSET%)
(/CPMB/EXPORT_MD_CONVERT,SAPP,%APP%)
(/CPMB/EXPORT_MD_CONVERT,OUTPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,INPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,FULLFILENAME,%FILE%))
(/CPMB/FILE_TARGET,ADDITIONALINFO,%ADDITIONINFO%))
================================================================================1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius -
Support for unit testing object types
There's a Feature Request that suggests expanding the unit test tool to object types:
Title
Provide object type support for unit tests
Description
In the current version (2.1.0.63) I can perform only unit test for packages, function and procedures. But we use a lot of object types in the database and would like to test them. When is a support for object types scheduled?
Average Rating
10
Development Comment
This is planned for the next release.
Status
Scheduled for 3.0
Although the status suggests inclusion in v3, in my current version 3.2.20.09 there is nothing.
This is clearly an important issue for those who have voted for it as it scores a perfect 10 on average rating.
Is there any sign of object types being supported in the 4.0EA1 release? There is a strong desire within my organisation to move to a more object-based approach to PL/SQL coding but until we are able to unit test easily there will be no real progress.If you are ready to learn a little bit of Ruby then you can try [PL/SQL unit testing with Ruby|http://blog.rayapps.com/2009/11/27/oracle-plsql-unit-testing-with-ruby/]. ruby-plsql library [supports also PL/SQL object types|http://blog.rayapps.com/2009/11/25/more-oracle-data-types-supported-by-ruby-plsql-gem/] as input and output parameters and return values.
-
Consolidated status overview for all test plan
Hi all,
We are performing our Integration test from SolMan. I would like to generate a consolidated report which will give me data same way as the status overview gives for individual test plan.
This will help me to track the progress at the test package level, which inturn is my IT scenario.
Any quick help will be highly appreciated.
Regards,
SmitaThanks Prabhakar,
I am aware of this, but this gives me details for one test plan. Even when I use STWB_2, it gives me summary of all the test plans, and for status overview I have to go in each and every test plan.
I am looking for some way out to generate the status overview of multiple test plans together in same screen, for reporting purpose.
Any suggestions?
Thanks,
Smita -
Hi all,
I'm creating a javascript that makes a package for print in Indesign CS5. All goes well, the package gets created, but afterwards the fonts in the package seems to be in use until I quit Indesign. Has anyone had this problem, or can anyone help me with this.
Thanks a million.
Best regards,
Jan.
var doc = app.activeDocument;
var ThePackagePath = Folder("~/Desktop/input/test");
doc.packageForPrint(ThePackagePath, true, false, false, false, false, false,false,"",false);Hi Harbs,
The problem is that we can't process the package in our workflow because
the fonts in the package are still in use by Indesign on the client
machine.
Jan. -
Business Package for MDM 5.5 SP3
Hi
We are struggeling a little bit with the connection to the MDM Server.
Portal version = NW04 Stack14, MDM version = 5.5 SP3 and the Business Package for MDM has been installed in the EP.
SAP EP on a single server, MDM on a single server.
In the documentation for the Busines Package for MDM at page 4 where we are "Creating Portal Systems Objects for Custom Repositories", I have a question regarding the MDM server references.
Step 1. System adm - System conf - System Landscape - My folder - New - System - MDM Server - Next
Step 2. System name= MDM, ID=mdm, prefix=com.xx, Language = English, Description = My test - Next
Step 3. MDM Server = ???? The host of which the MDM server is running or the MDM server itself - and which password should we use, The password for the host, the MDM server or the database????
Regards
Kay-ArneHi.
I managed to solve this issue by myself:)
I think the error is that I used the system templates from sp2....
Either way, i created a system from par "com.sap.pct.mdm.tech.systems" and filled in name, id, prefix, language and description. From there I opened the object, selected:
Usermanagement
- Usermapping: admin,user
Connection properties
- MDM 5.5 Host Server: Myserver
- Repository Language: English [US]
- Repository Port: 2005
- Schema Language: English [US]
System Aliases:
- My_MDM
Saved the object
Maintained the userid and password through Personalize
Connection Test - and it works
From there I created a iView (MDM) and followed the wizard
Regards
Kay-Arne
Maybe you are looking for
-
Using a custom login page for the portal
Hi all, I'm currently doing a migration from Plumtree 4.5WS to Plumtree 5.0.4. In the current 4.5WS portal, I'm catering to 3 different login mechanisms due to time-lags in migration of my users' workstations. The 3 mechanisms are: 1) Smart Card Read
-
HOW TO SET DELETION FLAG TO SERVICE ENTRY SHEET ?
Dear Experts, Can anybody explain how to set deletion flag to Service entry sheet created ? Service Entry sheet has been accepted and saved, i want to set deletion flag to the Service Entry sheet. Thanks in Advance
-
Bind variable and parameter problem
Hello, I'm migrating a complex report from Oracle Report to BI Publisher. Now I have some problems with the bind variables. In order to explain the question clearly, I simplified the code as below. The value of e1 and sum1 can be generated correctly.
-
Error with sql commands with ms access
hi! I'm having problems with sending commands like "create group x" and "alter database password" these aren't working. I'm using the jdbcodbc bridge. Simply doing this: Statement stmt = con.createStatement(); stmt.executeUpdate ("alter database pass
-
Video's from "DailyMotion" site not playing
I get emails occasionally from a site (I think it is "www.dailymotion.com". When I click on the video icon I get a blank page. Is this because they might be in Flash? alan