Spotlight Comment Missing, But Smart Folders Still Work

I have entered a lot of spotlight comments on files. On about several 100 off them, Apple Command i does not show any spotlight comments. Its not likely that I erased or failed to "save" several 100, say about 600 out of 900 files. I know for a fact that I entered spotlight comments on nearly all of my photo files. For some reason, the smart folders that look for spotlight comments still return the files.
I shut down and rebooted. Still no change. For some reason, I cannot find the way to edit the search criteria in smart folders.
Any ideas?

Well, this is proving to be a tough case. I rebooted with Option, Command P and R, and then rebooted in safe mode and ran disk utility, both verify permissions and check volume on both the upper level drive (the one that has a technical name) and the named volume (the one that has a user-assigned name). I hate to say this, but nothing has changed. <darn>.
I am kind of thinking about paying Apple to furnish and install an upgrade to my OS from 10.4 to 10.6 but am reluctant because of persistent reports that the newer OS has driver problems with Epson photo printers, and other issues with Adobe LightRoom which is a critical app for me.
I did search the forum to see if anybody else has the same kind of problem but did not find anything. It generous of you to offer your expertise, so I hate to keep coming back.
Anyway, is there another approach that I could look into?
Thanks!

Similar Messages

  • A relative synced my iphone with his laptop without me knowing. It had a passcode on the phone but the sync still worked. I have since found out he is quite IT knowledgeable and has been known to track other peoples phones.  How is this data useful to him

    A relative synced my iphone with his laptop without me knowing. It had a passcode on the phone but the sync still worked. I have since found out he is quite IT knowledgeable and has been known to track other peoples phones that he wants to know information about.  How is my data useful to him and can he restore this data on another iPhone and run it parallel to mine? I have had people send me messages which I have not received. These have been screen shot to me later including time and I have just not got them. I had 4 weeks worth of messages go missing from my phone..I know that he synced my phone because his work laptops I'd came up in my settings. Also if the above can be done can he change the settings on my actual phone and access my location without placing tracking software on my phone.  Can someone please help here as I can't restore a backup to my phone for obvious reasons and refuse to change my number because of this loser.

    Connect the device to the computer.
    In iTunes, select the content desired to sync.
    Sync.
    This is all described in the User's Guide, reading it may be a good place to start.

  • No animation or videos will play from Firefox, but other browsers still work fine. I have checked plugins and even updated to the Firefox 14 beta - no fix

    As of yesterday no animation or videos will play from Firefox, but other browsers still work fine. I have checked plugins and even updated to the Firefox 14 beta today, but this did not fix the problem.
    this problem started yesterday; before then there was no problem.
    I have updated everything I can find, and ran a system restore and disc clean.
    The problem still persists. What am I missing here?

    This happened to me too. This problem started suddenly with no changes made on my part. I had 11.2 Flash version with Firefox 13. I tried updating to the new Firefox, same problem, then updated to Flash 11.3. I even uninstalled RealPlayer.
    I read a solution on another forum and it was as easy as clearing my cache. Everything works fine now (even after reinstalling RealPlayer and allowing the download button function).

  • When I sync with my iphone i get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds until I quit Entourage.  How do I turn this message off?.

    Question: 
    When I sync with my iphone I get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open.  This continues until I quit Entourage.  How do I turn this message off? It interferes with any other work I am doing.   I appreciate any suggestions.

    I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
    I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
    Edit: I just removed every project I have from the Media Browser. Still no luck.

  • For another program (WASY WGeo) after the working with PS CC I need a picture with the right colours in the end with 256 colours in 8 bit per picture - I still got it until yesterday. I don´t know what I´ve done wrong in PS CC but I´m still working in mod

    For another program (WASY WGeo) after the working with PS CC I need a picture with the right colours in the end with 256 colours in 8 bit per picture - I still got it until yesterday. I don´t know what I´ve done wrong in PS CC but I´m still working in mode with 8 bit RYB. I controlled my result with Irfan View: it´s a picture with 16,7 million colours and 56 bit pp.

    Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
    That field is not for attempting to fit your entire question in there.
    Please keep this in mind next time you post.  Thank you.

  • One week ago my iPhone felt, the screen was damaged but it was still working. Today it felt again and now it doesn't turn on, what can I do? Please help me.

    One week ago my iPhone felt, the screen was damaged but it was still working. Today it felt again and now it doesn't turn on, what can I do? Please help me.

    Hold down on the sleep button and the home button at the same time for about 10 seconds until the Apple logo appears on the screen. Ignore the red slider. When the logo appears let go of the buttons.

  • Spotlight comments search  and smart folder fails

    Spotlight search of the "Spotlight Comments" field fails after a file is saved in TextEdit or iWork programs.
    I reproduced this failure, 100% of the time, in OS X 10.8 and 10.8.1 (with iCloud enabled or with it iCloud disabled) and can not reproduce this failure in Mac OS X 10.7.x
    The steps to reproduce are simple and quick:
    Create a new test file in TextEdit and Save it on the Mac (saved as, for example, test.rtf)
    Quit TextEdit
    In the Get Info panel for the test.rtf file and enter some unique text in the Spotlight Comments: field, for example XYZZY:
    In Finder create a new Smart Folder (File > New Smart Folder)
    Create a search criteria in the Spotlight comment field for the unique text from step 3 (XYZZY in this example) and hit Save and name the Smart FolderNote, the test.rtf file immediately appears in the smart folder
    Open the test.rtf with TextEdit and change the text and Save the file.
    Note, as soon as you hit Save in TextEdit the test.rtf file disapears from the SmartFolder.  This is the error.  Also note, the Spotlight Comment value (in this example, the text XYZZY) is unchanged, it still exists.
    See attached screen shot after step 7 that shows the smart folder no longer shows the text.rtf file even though the search criteria is met.
    I have reproduced this error with TextEdit and Pages and Numbers but not with other applications that are not iCloud enabled.

    Clendenen02 wrote:
    where should I run the code? in the terminal, or an applescript, or should put it in xcode and run it from there or the terminal.
    What MrHoffman said.
    But if it's easier, you can wrap it in Automator and have Automator ask for the Folders: (Test on a sample of your files before running on all 700 files)
    (do you really own 700 movies??)
    The Workflow is:
    Put this in the Run Shell Script Action (and pass input as arguments":
    PicDir=$1
    MovDir=$2
    for f in $PicDir/*
    do
         if [ ! -d "$f" -a "${f##*.}" = "jpeg" ]; then
              comment=$(mdls -raw -name kMDItemFinderComment "$f")
              if [[ $comment != "(null)" ]]; then
                   picname=${f##*/}
                   movname=${picname%.*}.m4v
                   if [[ -e "$MovDir"/$movname ]]; then
    osascript <<-EOF
    tell application "Finder"
    set comment of file (POSIX file "$MovDir/$movname") to  "$comment"
    end tell
    EOF
                   fi
              fi
         fi
    done
    (BTW, I know that this is a bit of sloppy scripting (wraping an osascript in a Bash Script wrapped in Automator, but it does what you need)

  • Upgrade from Tiger makes smart folders not work any more.

    I tag certain categories of applications with Spotlight comments, and create a smart folder to find those files with that Spotlight comment. This way I can have a folder for 'games', for example.
    Those smart folders don't work any more in Snow Leopard.
    The Spotlight comments are still there, tho.
    Here is what is stranger. If I recreate the smart folder, it still does not work.

    Ug! I have to reenter all the Spotlight comments on each Application. That fixes it.
    Not sure if recreating smart folders was necessary, tho.

  • Smart folders not working...

    I've got some smart folders that just stopped working... I haven't changed the definitions and they were working fine, but all of a sudden they are not.
    The one that is not working is defined with 3 things, one of them is another smart filter. This has always worked in the past.
    I booted the machine, and inso doing went in and out of mail. Is there anything to reset?
    thanks...

    I found a work around... but I'm still curious why this stopped working...
    The original logic was to have a sort of pre-filter Smart Mailbox with tons of conditions with "Any" selected. Then the second folder had "All" selected with "In the pre-filter mailbox" and "in the inbox selected". This stopped working and I had to then change it to "In the pre-filter mailbox" and "not in the specific folder I later sort into" This isn't quite as useful since sometimes I sort into different folders, but it did work.
    I'm on 10.4.10 on a PPC iMac G5 1GB DDR2 SDRAM... I've done all the updates Apple can put out here except the iPod stuff since I'm not in that world... yet.

  • Smart Folders not working in Addressbook

    When i use the smart group function of my addressbook it doesn't mather what rules i specify ... i always get everyone in my addressbook.
    How can i make this work ?
    I have r/w rights on the addressbook folder so that shouldn't be a problem.

    I found a work around... but I'm still curious why this stopped working...
    The original logic was to have a sort of pre-filter Smart Mailbox with tons of conditions with "Any" selected. Then the second folder had "All" selected with "In the pre-filter mailbox" and "in the inbox selected". This stopped working and I had to then change it to "In the pre-filter mailbox" and "not in the specific folder I later sort into" This isn't quite as useful since sometimes I sort into different folders, but it did work.
    I'm on 10.4.10 on a PPC iMac G5 1GB DDR2 SDRAM... I've done all the updates Apple can put out here except the iPod stuff since I'm not in that world... yet.

  • Smart Folders only work if I logout after a reboot

    I have been having a problem with smart folders. If I create one it works fine but when I reboot my machine it stops working. Also, if I try and set kind -> Others and look in the list box it is empty. If I log out and then back in it now works. Someone else reported this last year but there was no resolution I could find http://discussions.apple.com/thread.jspa?messageID=702435&#702435 so this looks like a long standing bug.
    Very annoying and makes smart folders almost useless. Has anyone found a fix other than the logout/login I have to use at the moment?

    I cleared my inbox and am still experiencing the same problem. please take
    the time to review this thread as well, as it is other users with the same
    problem i am experiencing.
    https://community.verizonwireless.com/message/1066309<https://community.verizonwireless.com/message/1066309#1066309>
    On Wed, Mar 26, 2014 at 11:46 AM, Verizon Wireless Customer Support <

  • Screen image freezes but iMac seemingly still working

    Hi,
    The screen on my iMAC has started to freeze in the past 1 maybe 2 weeks - there is no pattern to this - seems to be quite random.
    However, it appears that just the image has frozen, the mouse pointer can move over the frozen image but cannot select anything.
    If the iMAC goes into power save whilst the screen is frozen, pressing a key on the keyboard brings the frozen screen image back up - so it seems as though the peripherals are communicating with the iMAC, it's just that the screen image has frozen.
    It froze on me today when doing a manual Time Machine BU to an external HDD - but the BU still continued on and I waited until the ext HDD went into sleep mode which indicates that BU has finished. After a hard reboot, I checked Time Machine and the BU was fine.
    Any ideas on what needs to be fixed here?

    Deleting the two plist files didn't work, and the Disk Utility found no errors with the disk.
    Funny thing is that when I log in as the root user - this doesn't seem to happen, I had the root user up for 4 hours today, not a problem, why? What is it about the root user that seems to be protected from this but all other users are affected after a short period? The only difference is the regularity of login, last time I used root user prior to this problem was last year, have all of the other users picked up the same problem somehow.
    I don't think it's the X1600 graphics card as the screen saver animated image is still able to kick in (or is this a low level BIOS function?), the processor doesn't seem to be frozen either as the talking clock continues to read out the time, the keyboard however does not respond when the screen has frozen.
    Would restoring user accounts from a Time Machine Back up taken before this problem appeared be the way to go? Any potential pitfalls with this - can I literally just restore a user folder or is there other dependent stuff that would have to be restored as well?

  • Uninstalled Java, but my apps still work??

    I'm wondering if there's something I'm not looking for -- some way Java can start up.
    I uninstalled it and I don't understand why some Java-based apps still work.
    How is that possible?
    The reason I care about this is because I removed Java in response to a virus.
    I haven't found traces of the virus (possibly "Win32/TrojanDownloader.Agent.PDF trojan") anymore.
    I've used all kinds of utils to get rid of it:
    Manually: ProcessExplorer, HiJackThis, Process Scanner
    Automated: NOD32, Malwarebytes, Ad-Aware, Spybot, TrojanHunter, Trojan Remover
    I uninstalled Java with Windows Add/Remove.
    And I don't have any "Java"-titled processes listed as currently running in my Windows Task Manager.
    But now some Java programs work and some say they can't find Java.
    Working: OpenOffice, FileZilla
    Not Working: jEdit, Spark, DirSyncPro
    I just noticed and deleted some "java" titled items in my Prefetch directory.
    I'll restart now.

    Ok, nothing reappeared in the "Prefetch" directory, but OpenOffice and FileZilla both work fine.

  • My iphone 4s screen has gone blank but the phone still works

    My iphone 4s screen has gone blank but the phone still works

    Hello antspeaks,
    It sounds as though screen curtain has been enabled on your iPhone. This can be disabled by tapping three times with three fingers on your iPhone's screen.
    Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off.
    iPhone User Guide - Use iPhone with VoiceOver
    http://help.apple.com/iphone/7/
    Cheers,
    Allen

  • Disk Utility says disk can't be repaired but it is still working

    Recently my MacBook Air had some performance problems--many programs crashing, etc.  I ran Disk Utility and it came back saying the disk is corrupt and needs to be repaired.  I rebooted and ran the Disk Utility repair function but Disk Utility said the volume could not be repaired and recommended that I back everything up, wipe the drive, and restore.
    The thing is that my computer is now functioning normally.  Disk Utility still says there's a huge and unrepairable problem, but aside from that, everything is working fine.
    I have a time machine backup, so I could wipe and restore the drive fairly easily, but it would take some time to do it.  I'm in the middle of some important things for work and so I'd rather put this off for a couple of weeks, if I can.
    A few questions: (1) is there other software, aside from Disk Uility, that I should try to repair the disk?  (2) How much of a ticking time-bomb do I have with this problem?  Though reformatitng and restoring would be a hassle right now, it is less of a hassle than if my computer were to fail completely minutes before a presentation.  So, if this is an urgent problem, then I'll probably address it now.  But, if Apples have been known to soldier on for months despite error messages like what I've received, then I may take my chances and wait to reformat/restore until a more convenient time.
    Any and all thoughts appreciated, thanks!

    Thanks for these replies. 
    I've got regular time machine backups and just backed up some of my data by copying some key folders to an external drive.  I'm bit paranoid about backup integrity and would ideally like to do another full backup to a different drive using a system other than time machine, in the event that something goes wrong with the time machine backup.  Any recommendations on good and affordable backup software to do a backup of my TM backup?
    One other question: I seem to encounter problems like this pretty frequently.  I'd say once a year or so, my drive fails completely or gets near enough to failing that I have to wipe and restore.  (I've never had a TM backup fail to work, though the last go around there were some hiccups which has led to my backup paranoia.)  I've had this happen on multiple computers, so I'm becoming pretty convinced that the problem lies somewhere in my data.  Is it possible (even likely) that there's something in my data causing this recurring problem?  If so, is there anything I might be able to do to try and pinpoint and address this problem?  I'd love to go one year without having to wipe/restore my machine!
    For a while I thought I just had bad luck.  But I think this is like the 4th or 5th time this has happened in the past 4 years and every time, I'm restoring from a backup, so I come back with the same data.  It's the one constant since I've had 3 different machines over this same time period. 

Maybe you are looking for

  • How do i get my laserjet 1020 to print from my mac? the 1020/1022 driver won't download!

    I followed the instructions on the HP website to download the latest printer software. But when I try to add my printer to the queue manually, it asks me to select a driver to use with it, and neither the 1020 nor the 1022 software is in there! There

  • Sap script - unicode

    Hi ALL , Recently we moved to Unicode . Here is the issue . When printing the Japanese Invoice, what ever hard-coded in Japanese language , in the script editor – ( se71 ) , is coming as garbled in the print out , where as the fields selected from da

  • OIM-OID Query

    Hi, I am looking to implement a scenario where I need to have some 3rd party application related data like app_id, app_pwd, app_role in OID. I have yet not sure whether to use OID connector or use an LDAP Sync for it. Basically I would already be hav

  • CPI2.x Configuration Management and avoiding out-of-sync configs

    Hi, I did'nt found an option to can save the configs after deployment as in LMS neither as a global setting nor as a deployment task setting. Aside letting changes unsaved is not a good network operation practice, it bring the configs in out-of-sync

  • How to apply a PO-matched prepayment invoice that has an extra tax line??

    I have a situation where I created a prepayment that's matched to a PO, but since the prepayment invoice document has VAT associated to it and not the PO, I need to add that extra line. So after matching the prepayment to the PO, I added an extra lin