SPRO - Default values for creating customers

Hi,
I want to define a default value for the "Sales Data Area" (Vertreibsbereichsdaten) if you create a new customer. Where can i define this default value?
Thank you
Stefan

Hi Stefan!
Just as I said: in customizing is no default value definition.
Vijay's transaction is for definition of sales area - your original question was a little bit misleading, so don't wonder if some answers don't match what you <i>wanted</i> to ask. We start come completely without background information and have to guess a lot.
Default values are maintained in customer master data of a reference customer (which is a normal customer, used as copy reference in next XD01).
Regards,
Christian

Similar Messages

Default values for creating vendor master data

Hi.
Is it possible to set default value for payment term and planning group when creating vendor master data of a specific account group?
Thanks in advance.

HI,
1, Create a vendor in your Account group as the reference vendor account
2, By t-code:XK01, create new vendor with reference vendor of step 1,
then the system will transfer the value from your reference vendor.
Regards
Ravinagh Boni

Account Creation - Badi for Default values for BP Role and Sales Area

Hi all,
my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
In my code
assign cr_me->('VIEW') to <lv_view_name>.
if sy-subrc ne 0.
exit.
endif.
lv_viewname = <lv_view_name>.
case lv_viewname.
when 'AccountDetails.htm'.
I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
Am I following the right way? Is there another solution to prepare the output for default values?
Any kind of suggestion will be appreciated.
Regards, Roberto

go to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
Regards.

Define Default Values for Value Categories-reg

Hi Experts,
What will be the effect in cost tab in MO,if I dont maintain the Define Default Values for Value Categoriesin SPRO.Because by just maintaining Value categories and its cost element assignment,Iam getting the planned and actual cost in cost tab of order.
Pl clarify.
regards
KRISHNAN

hi..
Yes,u r right..without assigning default values also u can get the P/A cost in PM order.But,Suppose u have created 4 different value categories,ex-
Mech Spares
Elect Spares
Civil Spares
Maint Services
and u are assigning all these as default value categories,if ur maint order has only cost against mech spares it will show the cost incurred against that and cost against other value categories will be shown 0 in cost overview..
u can try it!!!

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set default value for vc2_255_arr in plsql parameter directive?

Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwong

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

How to set default value for Zfeild using statusprofile

hi experts,
I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
I have created a zstatus profile and have set the required status to inital,but no luck
please suggest if this canbe achived through status profile.
Regards
Anu.

Hi,
You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed" ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
Thanks & Regards
Suchita

Default value for variable are not within permitted value range (precalc)

Hello BW community
Issue:
I have created a variable (Characteristic Value/ Manual input-default value) and use the precalculated value set (details-basic settings). In the further variable definition I could select the precalculated value set in 'Default values', which I have defined beforehand in the broadcaster..
The precalculated value set in the broadcaster settings is just based on a master data query on 0CUSTOMER.
Error:
The variable gets the error E991/R9E Errors: Default values for variable 'XXX' are not within permitted value range.
The detail description of the error is: You defined default values for variable 'Sold-to party precalc value set for manuel input' that are not appropriate for the variable type; for example, a range is defined as a default value for a variable that only permits a single value.
So please has someone had the same issue and found out how to solve it? It would be excelent to get good solution for this issue.
Best regards and thanks
Christian
PS-1: System BW 701 / SAPKW70105
PS-2 : there has been a SDN entry with the same topic but not resolved too.
link: /thread/980839 [original link is broken]

Hello,
Thanks for your response.
I should have mentioned that in my post. I tried this very first time. I thought that this is the place where you provide default value. But I got following exception at that time, so I thought, may be this is used for something else.
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
oracle.jbo.NameClashException: JBO-25001: Object viewAllInd of type Control Binding Definition already exists.
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)Do I need handle something else when you put the default value?
Thanks,
Jai

Default value for Read-Only Picklist Field

Hi, all--
I would like to have a default value ("Undetermined") for the "Associated Account" read-only picklist value. I have an account record of this value for this purpose. This is because if there is no value in the field, the record will not be included in a report that includes the field. I do not want to make the field required at this point.
Field management doesn't appear to allow any default value for read-only picklists. Does anyone know how to get around this, either at the lead record stage or at the lead report stage (without resorting to an analytic, which won't work for what we are doing)?
Thanks.

That's a great question. It doesn't appear as though you can select it from the typical method of Admin | Application Customization | Lead | Lead Field Setup | Associated Account.
Have you tried creating a workflow to populate the field using Before Modified Record Saved?

What are the default values for the NetStream.multicast***** properties

I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.

the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
   var ns:NetStream = new NetStream(netConnection, groupSpecification);
   ns.multicastWindowDuration = 10; // change default for everybody
   ns.publish("mystream");
   ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

Default Values for Select-options In Webdynpro-ABAP

Hi Freinds,
Kindly,Help me in setting the Default values for the Select-options in Webdynpro ABAP.
Here the Node and the Attributes are Created Dynamically, and then Displayed Select-options Component View.
Regards,
Xavier.P

Xavier Reddy Penta sent me this question via email and I answered it directly yesterday. Here is the solution that I provided to him, so that it is stored with the original question:
I believe your problem is that you are not setting the value into the range correctly. You are setting it directly into the field symbol of the range like such:
<FS> = L_STRING2.
But ranges are deep objects. They have four fields: Sign, Option, High, and Low. This is from the online help:
1.     sign of type c and length 1. The content of sign determines for every row whether the result of the condition formulated in the column is included or excluded in the entire resulting set for all rows. Evaluable values are "I" for include and "E" for exclude.
2.     option of type c and length 2. option contains the selection option for the condition of the row in form of logical operators. Analyzable operators are "EQ", "NE", "GE", "GT", "LE", "LT", "CP" and "NP" if column high is initial, and "BT", "NB" if column high is not initial. With the options "CP" and "NP", the data type of the columns low and high must be of the data type c, and special rules apply for entries on the selection screen.
3.     low of the data type defined after FOR. This column is designated for the comparison value or the lower interval limitation.
4.     high of the data type defined after FOR. This column is designated for the upper interval limitation.
So when you are moving the value into the field symbol you are setting it into the sign column.
Here is an example of how you can access the components of the range:
* create a range table that consists of this new data element
    lt_range_table =
      wd_this->lv_sel_handler->create_range_table(
           i_typename = l_typename ).
    IF l_fieldname = 'CARRID'.
      FIELD-SYMBOLS: <tab>         TYPE INDEX TABLE,
                         <struct>      TYPE ANY,
                         <wa>          TYPE ANY,
                         <option>      TYPE char2,
                         <sign>        TYPE char1,
                         <high>        TYPE ANY,
                         <low>         TYPE ANY,
                         <wa_values>   TYPE ANY.
      ASSIGN lt_range_table->* TO <tab>.
      APPEND INITIAL LINE TO <tab> ASSIGNING <wa>.
      ASSIGN COMPONENT 'OPTION' OF STRUCTURE <wa> TO <option>.
      ASSIGN COMPONENT 'HIGH' OF STRUCTURE <wa> TO <high>.
      ASSIGN COMPONENT 'LOW' OF STRUCTURE <wa> TO <low>.
      ASSIGN COMPONENT 'SIGN' OF STRUCTURE <wa> TO <sign>.
      <sign> = 'I'.
      <option> = 'EQ'.
      <low> = 'AA'.
    ENDIF.

Default Value for Order Type based on Company Code in ME21N

Hi,
Using ME21N, I want to make the PO type defaulted to a certain company code, say for instance Company code XYZ should have a PO type XYZ Purchase Order, ..company ABC should have a PO type ABC Purchase Order, and so on...I'm just puzzled how to implement it. I know that we can set a Default value for PO Headers in Personal Settings but its doesnt give the result I want coz it will only have one Default Value. What I wanted is when a certain company code is chosen, automatically, the corresponding PO type for that Company code will be displayed in the Order Type drop-down menu (so there's no need to choose on the drop down list what Order type) Is this possible in ABAP? Hope i made myself clear.
Thanks in Advance.

Use BADI IF IF_EX_ME_PROCESS_PO_CUST - method OPEN
View the interface documentation in transaction SE19 and you will see the method OPEN can be used :
2. Opening of a purchase order (OPEN method)
The system opens a new document to create, change or display a purchase order. With the OPEN method,
<b>you can import your own data and prepare it for further processing.</b>
This is available in 4.7 Enterprise but not sure how far back.....
hope this helps
Colin.

Default values for static report parameters are not visible when scheduling

Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

Hi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick

Default values for confirmation control key

Dear forum
I am using a confirmation control key 0004 Shipping notification (standard SAP) in the Purchase order line item (created with ME21n).
When I enter the confirmation data (with transaction ME22n) in the purchase order line item (confirmations tab), I have to type in delivery date, quantity and so on manually, which is standard.
But, what if I want to copy the original delivery date and quantity from the line item in the order, and use this as default value for the line item confirmation data...is it possible somehow?
The reason why I want to do this is for the user not having to go in and update this date manually all the time, but only when the confirmed dates/quantities differ from the desired delivery date and quantities in the purchase order line item. We are not on EDI or using Inbound deliverys for Purchase orders.
Thanks
Ola

Hi,
The Confirmation is nothing but the acknowledgement.So, its usually entered manuallly by the authorised User allowing follow on documents for Purchase Order.
You can chesk once the customisation of Confiramtion control keys for automatic update indicator.
Yes, you can use User Exit and develop with the help of ABAPERS.
Hope it will help you.
Regards,
Smitha

SPRO - Default values for creating customers

Similar Messages

Maybe you are looking for