SPRO setting to call shipping screen in PO

Hi Friends,
Is there any SPRO configuration using that i can change the population of shipping subscreen in Purchase order which comes under item level.
Please help....

Hi Sunil,
SPRO->Materials Management->Purchasing->Purchase Order->Setup Stock Transport Order->Assign Delivery Type and Checking Rule - > Change the Delivery type for the corresponding Supplying plant and Document type to NL.
I am sure this works.
Cheers..
Santosh.
Reward Points if Usefull.

Similar Messages

SPRO setting for Shipping screen in Purchase Order

Hi Friends,
I am working at Purchase Order in AFS and I added a custom screen using BADI (ME_GUI_PO_CUST) at item level that behave same as standard shipping screen but I want this custom screen should display in all condition, actually it disapper when standard shipping goes off.
so, to accomplish this do i need make any changes in BADI or something to do in SPRO???
Please suggest....!
-SUNIL.

Re: Only 0 KG of material available
Kindly check above mentioned thread.

Calling SAP Screen in RFID

Hello All,
I am technical consultant. I searched SDN for actual process which can help me with end to end soution in bits and pieces. Ultimately i am posting a query here.
We are having requirement for automation of outbound shipping process. We need to develop some custom screens in SAP, integrate them with scanners which client is using. Whenever a user scans the material/anything, it should be captured in SAP screen on scanner.User will perform enter button,and further processing will be done in SAP automatically.
So looking at requirement, i searched in SDN and found that we can use SAP console, can create custom screens in SAP, configure them in mobile data entry in SPRO in sap.
But i want to know how actually this process works. There could be many screens configured at a time in SAP. How would any scanner get the required one screen from SAP for scanning material/anything?
I would really appreciate your immediate help.
Thanks
Manisha

Hi manisha,
your requirement is very high level, but from what I infer from it is that you want to be able to create a delivery , pick, pack & ship it upon a clik, did I get it right? here's how I'd address it : there's no standard transaction to achieve this.
1. you can automatically create handling units for your finished goods received from manufacturing orders, the HU number will contain all the material related information & will be labelled with HU number.
2. develop a transaction where you can scan in the HU number & automatically perform a pick, pack & ship depending on your requirement, (ofcourse, you can break this into mutiple transactions as you wish or combine)
you can develop RF transactions for the 2nd step (also possible for 1st step if needed) , deploy them onto the mobile devices using ITS mobile or websap console - ITS is probably better. every screen you develop has a screen number, the program will have to call the screen accordingly in your transaction.
cheers
rajki

How to call the screen in methods could u please explain

hi,
how to call the screen in methods could u please explain clearly with example

HI ,
CALL SCREEN - Call a screen
Basic form
CALL SCREEN scr.
Addition:
... STARTING AT x1 y1 ... ENDING AT x2 y2
Effect
Calls the screen scr; scr is the number of a screen of the main program. You use SET SCREEN 0. or LEAVE SCREEN. to define the return from the CALL screen.
Note
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition
... STARTING AT x1 y1 ENDING AT x2 y2
Effect
The coordinates x1, y1 (start column and start line in the window) and x2, y2 (end column and end line in the window) define the size and position of the CALL screen ("top left - bottom right"). Besides these coordinates, you can also see the contents of the primary window, but cannot perform any action there.
Note
If "ENDING AT ..." is not specified, suitable values are substituted for x2 and y2, taking into account the size of the called screen.
Exceptions
Non-Catchable Exceptions
Cause: No further screen level (call screen); the maximum number of nested screen levels is restricted to 50 at present.
Runtime Error: DYNP_TOO_MANY_CALL_SCREENS
THX

Back on a CALL SELECTION-SCREEN from an ALV

Hi all,
I have created a program with a normal selection-screen (1000).
According to the selected values, when I press "Execute" I go to a next selection-screen (2000) with instruction CALL SELECTION-SCREEN 2000.
Then I display an ALV.
When I press the back button, I want to go back to screen 2000, but actually I go directly to screen 1000.
PARAMETERS : p_choic1 RADIOBUTTON GROUP cho DEFAULT 'X'.
PARAMETERS : p_choic2 RADIOBUTTON GROUP cho.
SELECTION-SCREEN BEGIN OF SCREEN 2000.
PARAMETERS : p_table TYPE char10.
SELECTION-SCREEN END OF SCREEN 2000.
START-OF-SELECTION.
IF NOT p_choic1 IS INITIAL.
    CALL SELECTION-SCREEN 2000.
    PERFORM alv_process.
ENDIF.
Have you got any idea of what I can do to return to screen 2000 from the ALV after pressing Back button ?
Thanks.

Hi,
Follow below sample code...
SELECTION-SCREEN BEGIN OF SCREEN 2000.
PARAMETERS p_mat TYPE matnr.
PARAMETERS p_enam TYPE ernam.
SELECTION-SCREEN END OF SCREEN 2000.
START-OF-SELECTION.
set PF-STATUS 'STATUS'.
WRITE:/ p_mat,
          p_enam.
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'S2000'.
      CALL SELECTION-SCREEN 2000.
WHEN 'EXIT'.
      EXIT.
ENDCASE.
Ram.

Creating a screen in report program and calling that screen in program.

Hi,
I have a report program and I want to give output in different screen.
can any one tell me how to create a screen in executable program and calling that screen in program in END-OF-SELECTION for displaying results.
Thanks a lot.
Kiran

Hi,
Open your program in SE80. Right click on your program. Click CREATE->Screen menu. This will allow you to create screen for the program.
In the End-of-selection event call the screen using the commands CALL SCREEN or LEAVE TO SCREEN or SET SCREEN.
CALL SCREEN
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba4e635c111d1829f0000e829fbfe/content.htm
LEAVE SCREEN/SET SCREEN
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbab3635c111d1829f0000e829fbfe/content.htm
Regards,
Vara

Dialog Programming(module pool):call a screen to subscreen area.

Hi experts,
I want to call a screen created in the function group into my
subscreen area of current screen of main program.
I have done the below way :
1. Created a screen 100 in the module pool program z_bpmodule.
2.created a subscreen area SUB in screen 100.
3. I hav created function group :zfungroup
and a screen 300,a function module Z_EXPORT_FUN for exporting the data to the screen 300 from report.
Now my prog is lik below :
PROGRAM Z_SUBSCREEN1.
DATA : ZMATNR LIKE MARA-MATNR.
DATA : DYNNR LIKE SY-DYNNR .
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'TITLE'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module EXPORT_DATA OUTPUT
      text
MODULE EXPORT_DATA OUTPUT.
CALL FUNCTION 'Z_EXPORT_FUN'
                          EXPORTING Z_INPUT = ZMATNR.
ENDMODULE.                 " EXPORT_DATA OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'EXP'.
DYNNR = '0300'.
*ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
and the flow logic is lik this :
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
MODULE EXPORT_DATA.
CALL SUBSCREEN SUB INCLUDING SY-REPID ' 0300'.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
CALL SUBSCREEN SUB.
Now the main problem is i am not able to call the screen from function group to subscreen area...
kindly provide the solution.....
Thanks a lot in adv ....
Brahma.

I am just getting the main screen and the subscreen is not at all displaying .....
but when i perform the PAI .. I am getting the dump ..
Short text
    Dynpro does not exist
What happened?
    Error in the ABAP Application Program
    The current ABAP program "Z_SUBSCREEN1" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The system attempted to use dynpro 0000 in program "Z_TX1".
    This dynpro does not exist.
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DYNPRO_NOT_FOUND" " "
    "Z_SUBSCREEN1" or "Z_SUBSCREEN1"
    "EXPORT_DATA"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
hope i have given the full information.
Thanks a lot.

The URL to call the screen of RFx directly

Dear expart.
I'm setteing at SRM7.0 in order to call RFx directly from SUS now.
I would like to know what URL should be sat at URL of BIDDING_SERVICE in CustomerSetting of SUS.
Should I set URL of EP there?
Should I set URL of ITS as well as SRM5.0?
Because ITS have not been used since SRM7.0, I have no Idea how to set.
SO could you please let me know if you know the URL calling the screen of RFX directly.
Thanks

Hello ,
Please use the url to launch the RFQ BO directly.
HTTP://<Server and Port>/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif?
sap-wd-configId=/SAPSRM/WDAC_I_FPM_OIF_RFQ_PR_PU
&sap-system-login-basic_auth=X
&sap-client=<client_no>
&sap-language=EN
&SAPSRM_BOID=<Object Guid>
&SAPSRM_BOTYPE=BUS2200
&SAPSRM_MODE=DISPLAY
Let me know if you have any further issues.
Best Regards.
Mani

Call Selection Screen

Hi,
can any one give me good links for
All variants of at selection screen..
some thing on call selection screen
Thx,
Shashi

·     AT SELECTION-SCREEN
You should only perform very expensive checks with AT SELECTION-SCREEN if the program is then started. Here, you can read the system field SSCRFIELDS-UCOMM (provided a statement TABLES SSCRFIELDS exists). If the field has one of the values 'ONLI' (= Execute) or 'PRIN' (= Execute and Print), the report is then started, i.e. the selection screen is closed and the processing continues with START-OF-SELECTION.
     Additions:
·     ... ON psel
Effect
This event is assigned to the selection screen fields corresponding to the report parameter or selection criterion psel.
If the report starts an error dialog at this point, precisely these fields become ready for input.
·     ... ON END OF sel
          For each selection criterion sel on the selection screen, you can call a further screen by pressing a pushbutton. On this screen, you can enter any number of single values and ranges for the selection criterion sel..
When this screen has been processed (i.e. at the end of PAI for this screen), the event AT SELECTION-SCREEN ON END OF sel is executed.
At this point, all the values entered are available in the internal table sel.
·     ... ON VALUE-REQUEST FOR psel_low_high
Effect
In this addition, the field psel_low_high is either the name of a report parameter or of the form sel-LOW or sel-HIGH, where sel is the name of a selection criterion. The effect of this is twofold:
1.     The possible entries pushbutton for F4 appears beside the appropriate field.
2.     When the user activates this pushbutton or presses F4 for the field, the event is executed. You can thus implement a self-programmed possible entries routine for the input/output fields of the selection screen. If the program contains such an event and the user presses F4, the system processes this rather than displaying the check table or the fixed values of the Dictionary field.
·     ... ON HELP-REQUEST FOR psel_low_high
Effect
As with the addition ON VALUE-REQUEST the field psel_low_high is either the name of a report parameter or of the form sel-LOW or sel-HIGH, where sel is the name of a selection criterion. When the user presses F1 on the relevant field, the subsequent processing block is executed. You can thus implement a self-programmed help for the input/output fields of the selection screen. If the program contains such an event and the user presses F1, the system processes this rather than displaying the documentation of the Dictionary field - even if the report parameter or the selection option with LIKE or FOR points to a Dictionary field.
·     ... ON RADIOBUTTON GROUP radi
Effect
This event is assigned to the radio button groups on the selection screen defined by PARAMETERS par RADIOBUTTON GROUP radi. If the report starts at an error dialog at this point ,precisely these fields of the radio button group
radi become ready for input again.
·     ... ON BLOCK block
Effect
This event is assigned to the blocks on the selection screen defined by SELECTION-SCREEN BEGIN/END OF BLOCK block. If the report starts at an error
dialog at this point, precisely these fields of the block block become ready for input again.
     The events assigned to the radio button groups are executed according to the first parameter of the radio button group.
The events assigned to the blocks are executed "from the inside to the outside".
·     ... OUTPUT
Effect
This event is executed at PBO of the selection screen every time the user presses ENTER - in contrast to INITIALIZATION. Therefore, this event is not suitable for setting selection screen default values. Also, since AT SELECTION-SCREEN OUTPUT is first executed after the variant is imported (if a variant is used) and after adopting any values specified under SUBMIT in the WITH clause, changing the report parameters or the selection options in AT SELECTION-SCREEN OUTPUT would destroy the specified values. Here, however, you can use LOOP AT SCREEN or MODIFY SCREEN to change the inout/output attributes of selection screen fields.
·     ... ON EXIT-COMMAND
Effect
This event is executed at the exit command of the selection screen - that is, at Back, Cancel, or End,events executed after the screen is sent that do not cause the system to check the input and execute the PAI.
plz reward if useful
vivek

Probe in calling tabstriped screen from another screen ..

hi
could any one please help me ,,,that what is the logic for calling tabstriped screen from another screen ..
Thanks N Regards
Priya

Hi,
Jonathan.
Thanks for the response ...
I did execute with call screen statement ...(CALL SCREEN 0123). ..when i excute the program its working fine ,but the same programe when I execute with the T.CODE ...its giving erorr ...
ERORR:Program " ZTEST "tried to use screen 000.
        the screen doesn't exist.
HERE IS CODE.
let me know where is the mistake ..
could you please , help me ,,what i suppose to do .
let me know where is the mistake ..
REPORT ZTEST .
DATA: DATE LIKE SY-DATUM,
       TIME LIKE sy-uzeit.
DATA number TYPE sy-dynnr.
CONTROLS tabstrip TYPE TABSTRIP.
tabstrip-activetab = 'TAB1'.
number = '1003'.
tabstrip-activetab = 'TAB2'.
number = '1004'.
CALL SCREEN 1000.
*&      Module STATUS_1000 OUTPUT
      text
MODULE STATUS_1000 OUTPUT.
CASE : SY-UCOMM.
    WHEN 'ENTER'.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'MOD'.
          DATE = DATE.
          TIME = time.
          SCREEN-INPUT = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
ENDCASE.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_1000 OUTPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
    WHEN 'ENTER'.
      LEAVE TO SCREEN 1001.
endcase.
ENDMODULE.                 " USER_COMMAND_1000 INPUT
*&      Module USER_COMMAND_1001 INPUT
      text
MODULE USER_COMMAND_1001 INPUT.
CASE SY-UCOMM.
        WHEN 'button1'.
        CALL SCREEN 1002.
    ENDCASE.
    ENDMODULE.                 " USER_COMMAND_1001 INPUT
*&      Module USER_COMMAND_1002 INPUT
      text
MODULE USER_COMMAND_1002 INPUT.
    CASE sy-ucomm.
      WHEN 'TAB1'.
        number = '1003'.
      WHEN 'TAB2'.
        number = '1004'.
    ENDCASE.
    ENDIF.
ENDMODULE.                 " USER_COMMAND_1002 INPUT
*&      Module STATUS_1002 OUTPUT
      text
MODULE STATUS_1002 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_1002 OUTPUT
Thanks N Regards.
Priya.

How to call a screen /t-code by double clicking on the output of an alv?

Hi,
I want to call a screen / t-code on double clicking on the output of an alv report.
Suppose we click on a value in the "Pur Req" feild of the ALV output it should open the the transaction code and give us the details of that particular value. How can I do that?
Thanx in advance..

If you displaying ALV using Classes..( CL_GUI_ALV_GRID)... You need to create event receiver and register the double click event handler method dynamically.... Here's the sample code...
*                            C L A S S E S                             *
class lcl_event_receiver definition.
public section.
    methods: handle_double_click
              for event double_click
              of cl_gui_alv_grid
              importing e_row e_column.
endclass.
*       CLASS lcl_event_receiver IMPLEMENTATION
class lcl_event_receiver implementation.
method handle_double_click.
    data: l_cc like line of gt_cc.
    data:
    g_row type i,
      g_value(10),
      g_col type i,
      g_row_id type lvc_s_row,
      g_col_id type lvc_s_col,
      g_row_no type lvc_s_roid.
* Read the double click cell
    call method gr_grid->get_current_cell
           importing
             e_row     = g_row
             e_value   = g_value
             e_col     = g_col
             es_row_id = g_row_id
             es_col_id = g_col_id
             es_row_no = g_row_no.
    clear wa_itab
    read table gt_itab index g_row_id into wa_itab.
    case g_col_id.
      when 'EBELN'.                   "Show Process Order
        if not wa_itab-ebeln is initial.
          set parameter id 'BES' field wa_cc-ebeln.
          call transaction 'ME22N' and skip first screen.
        endif.
    call method gr_grid->set_table_for_first_display
        exporting
        i_consistency_check   = g_consistency_check
        it_toolbar_excluding = gt_exclude
        is_variant            = gs_variant
        i_save                = g_save
        i_default             = 'X'
        is_layout             = g_layout
    changing it_outtab        = gt_cc[]
             it_fieldcatalog = gt_fieldcat[]
             it_sort          = gt_sortcat[].
    create object event_receiver.
*   Register the 'Double Click' event handler method dynamically.
    set handler event_receiver->handle_double_click for gr_grid.

Screen Resolution while calling a screen

Dear SAP Gurus,
I am calling a screen and i need that screen with 1240*780 resolution.
Is it possible to do that ..if we can ..then please do let me know....
Thanks and Regards,
Dinakaran

I don't think that you can control the resolution for specific screens. You can set the resolution on the gui, but this is a global setting. I don't think that you can handle this with ABAP code.
Regards,
Rich Heilman

HT5463 I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

I turn the do not disturb button on and I am not given any options for setting or calls allowed. Does anyon have a fix for this?

Do Not Disturb and Notifications
Push notifications appear in Notification Center and alert you to new information, even when the
associated app isn’t running. Notifications vary by app, but may include text or sound alerts, and
a numbered badge on the app icon on the Home screen.
Turn off all notifications: Go to Settings and turn on Do Not Disturb. When it’s turned on and
iPhone is locked, all notifications and calls are silenced, but alarms will still sound. You can set the
following options in Settings > Notifications > Do Not Disturb:
• Automatically turn on Do Not Disturb: Set the starting and ending hours for when you don’t
want to be disturbed. iPhone turns on Do Not Disturb during these hours each day.
• Allow some phone calls during Do Not Disturb: When Do Not Disturb is on, calls are silently sent
to voice mail. To allow some callers to ring through, tap Allow Calls From. You can allow calls
from your Favorites list or other Contacts groups you define. For information about Favorites,
see Chapter 25, Contacts, on page 100.
• Allow persistant callers to ring through: Turn on Repeated Calls. If the same caller (based on
their Caller ID) calls you twice within three minutes, iPhone will ring.
Turn an app’s notifications on or off: Go to Settings > Notifications. Tap an item in the list, then
turn notifications on or off for that item. Apps that have notifications turned off appear in the Not in Notification centre

What options do I have if I want to set up a dual screen?

I have a Thinkpad T400 with a ATI Radeon HD3470 card. I am running the latest Arch x86_64 with Fluxbox and the 9.4 Catalyst drivers.
What is the easiest solution to set up a dual screen? Is there a way to do this without editing xorg.conf? Not that editing xorg.conf really is a big problem, but I will be moving around a bit and finding the correct settings for each screen would take some work. And I would like to see how far the dual screen development has come on GNU/Linux.
The way I see it the best way would be to have two screens with separate resolutions. Since LCD screens do not handle resolutions other then the native very well. So just stretching the screen makes the slave screen run the same height as the parent screen. Or am I wrong? It is not a problem running stretched if the screens run at the native resolution.
So, xrandr just gives me stretching. And the need of editing xorg.conf.
What about Twinview(just for nVidia) and Xinerama?
Is there other solutions?
SOLUTIONS:
There is arandr and lxrandr, both frontends to xrandr. Requires minimal xorg.conf editing. Only add a virtual line in the screen section. The virtual size does not have to be accurate, it only have to be bigger then the screens together. In my case, I have a 1440x900 primary screen and at most a 1280x1024 secondary screen. So my virtual size would be minimum 2720x1024. This is with the screens side by side. If the screens is one above the other it would be 1440x1924.
The exact size of the monitor is handled by xrandr(arandr or lxrandr). So, there will be no dead zone in the width(side by side solution), if the real height is different on the screen there will be a dead zone in height.
Using arandr or lxrandr means that you manually have to set this up each time the computer is restarted. To automate this, you can use xrandr. First do a
# xrandr
Screen 0: minimum 320 x 200, current 2464 x 900, maximum 2720 x 1024
LCD connected 1440x900+0+0 (normal left inverted right x axis y axis) 304mm x 190mm
1440x900 50.0*+ 60.2
1152x864 60.0 50.0
1280x768 59.9 50.0
1280x720 60.0 50.0
1024x768 60.0 50.0
800x600 60.3 50.0
720x480 60.0 50.0
640x480 60.0 50.0
640x400 59.9 50.0
512x384 60.0 50.0
400x300 60.7 50.0
320x240 60.0 49.9
320x200 60.1 50.0
DFP1 disconnected (normal left inverted right x axis y axis)
CRT1 connected 1024x768+1440+0 (normal left inverted right x axis y axis) 304mm x 228mm
1024x768 60.0*+ 75.0 70.1 60.0*
800x600 72.2 75.0 70.0 60.3 56.2
720x480 60.0
640x480 75.0 72.8 75.0 60.0
640x400 75.1 59.9
512x384 60.0 74.9
400x300 75.0 60.7
320x240 75.6 60.0
320x200 75.5 60.1
to find out where the screens are connected. Mine are LCD and CRT1. Then test with
# xrandr --output CRT1 --right-of LCD
to see if you get a stretched desktop. If this works, just add the last line to your .xinitrc
This solution gives you stretching.
My complete xorg.conf
# Copyright 2004 The X.Org Foundation
Section "ServerLayout"
Identifier "Laptop"
Screen 0 "Default" 0 0
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "True"
EndSection
Section "Monitor"
Identifier "LCD"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "radeon_hd"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default"
Device "radeon_hd"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1024x768"
Virtual 2720 1024
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by orjanp (2009-05-01 09:33:55)

I have an ATI Mobility x1600 on my laptop,and I use a separate CRT monitor as second output (well primary until I fix my backlight)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
Option "DontZap" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc"
Load "drm"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "No"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "No"
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "M56P [Radeon Mobility X1600]"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "DRI" "on"
Screen 0
Option "DDCMode" "True"
Option "MonitorLayout" "LVDS,CRT"
EndSection
Section "Device"
Identifier "Card1"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "M56P [Radeon Mobility X1600]"
BusID "PCI:1:0:0"
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "DRI" "on"
Screen 1
Option "DDCMode" "True"
Option "MonitorLayout" "LVDS,CRT"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "false"
EndSection
This works, and I get separate resolutions on the monitors. I tried using radeonhd but then the resolution on teh second monitor goes to some crappy values(which I figure are calculated proportionally to the 1280x800 one).

How to call a screen in a new session -- Urgent

Hi all,
I need to call a screen from another program in a new session, is it possible or not? if possible, please help me. After that when clicked on one button, session should automatically closed. waiting for valuable replies....
Thanks in Advance.
Siva Sankar.

Hi Gourav,
Thanks for ur quick reply. Actually i'm calling a module pool program from one screen when clicked on one button. My requirement is that module pool program should be opened in seperate session. when clicked on exit button in new session, that session should be closed. is it possible?
Thanks,
Siva Sankar.

SPRO setting to call shipping screen in PO

Similar Messages

Maybe you are looking for