SPROXY unable to get Interface meta-data from XI Server

Hi,
In our SAP R/3 Enterprise system, the transaction SPROXY complains that "No connection to Integration Builder (only local data visible)". It is unable to get the message interfaces defined in the SAP XI Server.
Connection to SLD is configured correctly, and transaction SLDCHECK works correctly.
Where can I configure the SAP R/3 system so that it can retrieve the message interfaces from SAP XI system ?
thanks,
Manish

Hi Manish -
Did you maintain the RFC destinations LCRSAPRFC and SAPSLDAPI? And the corresponding J2EE connections? These must be completed in addition to other possible configurations.
Please check XI 3.0 Configuration Guide, section 8 (Connecting Business Systems with an Integration Engine to the Central Integration Server). These have all the necessary steps.
Regards,
Jin

Similar Messages

How can i get the meta data from database?

Hi, all java and db experts,
I need to write a tool to generate java file which will be used to hold the resultset of a stored procedure of Oracle. Is there any API call or tools to connect to db and then get the meta data of the return cursor instead of reading stored procedure definition on my own?
Please help, thanks a lot.
Hanna

if i execute a Oracle stored procedure, the resultset of a cursor is returned. It's easy to know the meta data at the runtime.
However, could i get the meta data about the resultset of a cursor before runtime? Such as by connecting to the database and ask it about meta data of a specified stored procedure?
Is it feasible?
DatabaseMetaData dbmd = conn.getMetaData();
ResultSet rs = dbmd.getProcedureColumns("", "%", "SP_NAME", "%");
while (rs.next()) {
String colName = rs.getString(4);
int colType = rs.getInt(5);
int colDataType = rs.getInt(6);
int colPrecision = rs.getInt(8);
int colLen = rs.getInt(9);
int colScale = rs.getInt(10);
long defaultValue = rs.getLong(11);
But what i get is a list of stored procedure parameters. In oracle, cursor is IN OUT parameter . How can i get the meta data about the resultset of cursor?

AVAYA IP Phones unable to get an IP address from DHCP server.

I installed new SRW208P switch and I mada an uplink connection with SRW 2024 switch (using GE port).
when I am trying to connect AVAYA IP Phone to the SRW208P port, the set trying to get an IP address from the DHCP server and failed to get it.
some times after 10 minutes, it get the IP address, but all the machines (PCs) connected to the same switch (SRW208P) hange.
Note: the PCs an IP Phones are connected with separate UTP cables to the access switch.
Is there any suggestions to solve this issue, please.
Regards,

The issue is that your machine is not being assigned an IP address / was unable to reach the DHCP server to receive one. The 169.254.x.x IP your machine is showing isn't assigned from DHCP, it's assigned by the local machine and is referred to as an APIPA
address.
So something is preventing your machine from reaching your DHCP server, which could one of a number of things. In the first instance I'd suggest having a look at
http://epan36.blogspot.co.uk/2012/09/eventid-1001-dhcp-your-computer-was-not.html which lists several of things that could cause this error and things you can try in order to resolve it.
If none of those work, can you confirm whether you have any other machines connecting via the same method on the network, which might indicate whether this is an issue at the machine end or somewhere between the machine and DHCP server?

Problem while trying to get meta data from entity in CRM 2011 using java

Hi,
I have been trying to get the meta data from entity. Below is the code what i have tried.
EntityFilters entfilter = new EntityFilters();
EntityFilters_type0 eftypes [] = new EntityFilters_type0[]{EntityFilters_type0.Attributes};
entfilter.setEntityFilters_type0(eftypes);
EntityFiltersE entityFiltersE = new EntityFiltersE();
entityFiltersE.setEntityFilters(entfilter);
Boolean RAIP = new Boolean(true);
OrganizationServiceStub.ParameterCollection parameterCollection = new OrganizationServiceStub.ParameterCollection();
OrganizationServiceStub.KeyValuePairOfstringanyType entityFilters = new OrganizationServiceStub.KeyValuePairOfstringanyType();
entityFilters.setKey("EntityFilters");
entityFilters.setValue(entityFiltersE);
OrganizationServiceStub.KeyValuePairOfstringanyType retAsIfPublished = new OrganizationServiceStub.KeyValuePairOfstringanyType();
retAsIfPublished.setKey("RetrieveAsIfPublished");
retAsIfPublished.setValue(RAIP);
parameterCollection.addKeyValuePairOfstringanyType(entityFilters);
parameterCollection.addKeyValuePairOfstringanyType(retAsIfPublished);
OrganizationServiceStub.OrganizationRequest request=new OrganizationServiceStub.OrganizationRequest();
request.setRequestName("RetrieveAllEntities");
request.setParameters(parameterCollection);
OrganizationServiceStub.Execute org_execute = new OrganizationServiceStub.Execute();
org_execute.setRequest(request);
ExecuteResponse resp = serviceStub.execute(org_execute);
And getting the below error.
[ERROR] The formatter threw an exception while trying to deserialize the message: There was an error while trying to deserialize parameter
http://schemas.microsoft.com/xrm/2011/Contracts/Services:request. The InnerException
message was 'Element value from namespace http://schemas.datacontract.org/2004/07/System.Collections.Generic cannot have child contents to be deserialized as an object. Please use XmlNode[] to deserialize this pattern of XML.'. Please see
InnerException for more details.
Please help me if any one have an idea on this error.
Thanks in advance.

Hi
Did you get this resolved ?

Get Table Meta Data with RFC

Hi,
I wonder if there is a way to get the meta data from a table or structure using RFCs.
More detailed:
I am using RFCs to read data from tables and structures. It would be nice to have a way to also get the table definitions, like column headers, column types and contraints, etc. using RFC.
Does somebody know how to do that? (My test system is an IDES)
Thanks in advance
Stefan

It's me again,
Today, I had a closer look on what you gave me yesterday. I think the problem is that I asked for the wrong information.
What I am actually looking for isn't meta information for tables, but information about the "Associated Type" that is associated with every import, export, or table parameter of a function module.
If I double-click on one of those types in transaction se37 after choosing a function module, I get a wonderful overview about the structure including 'component', 'component type', 'data type', 'length', etc.
Is there an RFC I can call that gives me exactly this information?
Best,
Stefan

RICS0001:Internal Error,unable to process the collected data from the device.

Hi all,
I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
System is CW LMS 2.6
If I search the web I get the following Cisco document:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
'...in the log directory look for IC_Server.log.'
IC_Server.log:
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
[ Di Nov 16 15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
    at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
    at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
    at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
    at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
    at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
    at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
    at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
    at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
    at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
    at java.lang.Thread.run(Thread.java:534)
I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
Thanks for your help!
Alex

Well known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).

Unable to delete IDoc meta data

Hi,
When I'm trying to load the IDoc meta data from IDX2 it is telling first delete the old one and then reload. But, the problem is we are unable to see the already existing IDoc meta data.
Can some one suggest how to see meta data all the loaded IDocs.
Regards,
Jeevan.

Hi Jeevan,
You may be checking for the IDoc meta data in the wrong port.
Make sure that you are looking in the correct port.
>>Can some one suggest how to see meta data all the loaded IDocs.
1. In IDX2 expand the Port that you are trying to import the IDoc.
2. Locate the IDoc type in that port and hit Delete.
Thanks
SaNv...
Edited by: Sãnthosh Kûmãr V on Oct 23, 2008 11:20 AM

LMS Prime 4.1 RICS0001:Internal Error,unable to process the collected data from the device.

Hello,
I have a problem with inventory collection from several devices getting
"RICS0001:Internal Error,unable to process the collected data from the device."
ERROR,[Thread-20],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,918,Device does not exist in RME, Please check if device is already deleted

Did you schedule an inventory collection job?
Delete schedule and recreate it using device group.
Cheers,
Michel

Not able to get the Qualification data from BAPI

Hi all,
I am using a BAPI (BAPI_JOBREQUIRE_GETLIST) to get the qualifiaction data for requirement profile. It's working fine earlier but I did not get the qualification data from this BAPI, although the data is there in DB against this requirement profile.
Can someone suggest me why I am getting this issue. I have looked into SDN and in BAPI documentation and found as below:
"You require authorization (structural authorization) to read the Requirements subprofile."
I am having the same User ID as I had before (when I getting back the correct data), so I don't think it should be authorization issue.
Can someone help me out in this issue please.
Thanks,
Sanket Sethi

Hi Shiva,
It does not going to these includes at all. Message comes out with successfully done. The BApi is calling RHPP_COMMON_QUALI_READ inside, but this will not return any data. But if will call any qualification object ID, this BAPI will come up with data.
So the QP type LO profile will not come up with any kind of data, but if we pass the OTYPE as Q and pass any Qualification object ID then the data will be returned.
Is there any relationship or some other thing is missing? Any idea.
Thanks,
Sanket Sethi

I'm getting a "No Data From Device" error for older video import

I'm trying to create digital video archives of some older (Hi-8) tapes before they turn to dust. I've got a Sony deck with iLink and have been using iMovie, which is time consuming but error free. I want to use the "Create Camera Archives" feature in FCP X, but am not able to import any video. FCP recognizes the deck, lets me control it and displays video in the capture window. But it does not capture anything - camera archives are empty and when I try to import the video I get a "No Data from Device" message over the import window, as the video is playing in the background. I thought it might be an issue of import settings... but I can't find any to change.
Any advice appreciated. Thanks.

Make sure all your settings are correct for capture and playback. Also make sure that the settings on the deck are the same as well. I know I had an issue when my Sony FX1 HDV camera was set to DV, FCP gave a similar error message.

TS1474 I have a new PC - great. But the old PC has now gone and taken the backup of my iPhone 4S with it. How do I get all my data from my iPhone to a new copy of iTunes on the new PC?

I have a new PC - great. But my iTunes library has now gone with the old PC. With a new iTunes library how do I get all my data from my iPhone to a new copy of iTunes on the new PC?

It has always been very basic to always maintain a backup copy of your computer.
Have you failed to do this?

I lost my iphone. How can I get my saved data from back up on my new laptop?

Dear Friends,
I did a mistake as when selling my iphone I did not get my saved data from my iphone back up. Now I have a new laptop and I want to get my backed up data.
Is there any way I could get or as Apples traditional greed ... more money more money ...more .. more??????
Please help if I can get back my at least contacts and video for free. I do not are for my music. My God it is so difficult to get going with Apple.

stedman1 wrote:
A warranty does not cover physical damage. Did you have AppleCare +?
AppleCare+ doesn't cover loss or theft, only accidental damage.

Import Meta Data from CSV - Export Meta Data to CSV

Ability to import meta data into selected images from CSV file containing a number of fields, one of which is file name. The other fields would be selected tags to import.
Import logic would be, Where file name in column 1 matches current selected filename, then take following fields 2, 3, etc and import into Bridge.
Export selected meta data from selected files to CSV to form reverse of above to allow edit of data in Excel etc.
Further enchancement on import would be to allow instead of just filename, but date/time range matching.
Logic would be, Where date/time in column 1 is within X hours of selected
image creation date/time then import following fields into image meta data.
Useful for example if you already have a GPS tracklog in CSV and want to try and update images with GPS. Assuming camera clock approx same as GPS clock.

The issue was within the .csv file. There were duplicate records that were attempting to load as the ID value. After deleting the duplicate records, the transformation file ran successfully.
Debbie

Variant must get the current date from the system.

Hi All,
I really appreciate your help on below please;
I need to create a variant and schedule a report program once a day.
But variant must get the current date from the system (sy-datum).
The program should run for the values in the variant in schedule job run;
Can I do this using SAP variants (for Report Program) and schedule the job.
Many thanks
Iver

Standard functionality.
http://help.sap.com/saphelp_nw70/helpdata/en/c0/98039be58611d194cc00a0c94260a5/frameset.htm
Thomas

"Could not get the audio data from the file" error

Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

SPROXY unable to get Interface meta-data from XI Server

Similar Messages

Maybe you are looking for