SPRUNCALCACCOUNT able to execute without Currency dimension?
Hi,
I have an application, which doesn't have currency dimension. I'd like to use SPRUNCALCACCOUNT for copying values to cash flow statement.
According to the example written in the Administration Guide, I need to put currency parameter in addition to application set, category etc.
*RUN_STORED_PROCEDURE=SPRUNCALCACCOUNT([LEGALAPP], [ACTUAL], [USD],
[%SCOPETABLE%], [%LOGTABLE%],[Transformation group],[MAXSTATUS])
Is the currency dimension a must? I tried running it without putting currency and it doesn't work. Is there any workaround?
Thank you!
Sunny
I would be very surprised if it works without a currency-type dimension. It doesn't look like anyone on the forum here has experience with this; you may want to confirm with SAP support.
I would guess that the stored proc behind the scenes is looking up the name of the currency-type dimension, and then dropping that "USD" parameter into a SQL query's where clause in something like:
... select someStuff from mbrMyCurrencyTypeDimensionName where ID = 'USD'
If you're feeling adventurous, you might try to change one of your existing dimensions to a currency-type dimension, if that's possible. It would only work if the calculation makes sense by passing a single member of that chosen dimension into the SP.
A few versions back, I'd recommend playing with the system_constants.lgl file in the adminapp\application folder, to trick the BPC SQL logic in this way. The following would tell the system that the currency-type dimension is now named Product:
*FUNCTION CURRENCYDIM=Product
However, I think that these days, the stored procs all take their dimension-type metadata from tblDimension in the database, and not that system constants file.
Otherwise, your only other choice may be to add another dimension to the app -- even though it only has one member, LC. Not ideal, but maybe it's still worthwhile if your calcs can be done using the Account Transformation rules.
Similar Messages
-
Hi all, I have a requirement where I need to find all intersections of children of currency dimensions and currentmembers of all other dimension wherever data exists for them.
Its a ASO cube with and version is 11.1.2.2.
If I try to write the formula in a the below way to test, I get an error that 'Currenttuple can only be used with a named set'. But when I try to create a named set with the 'WITH' keyword, it not able to recognize the 'WITH' keyword. I think I am missing something obvious and this may not be the correct way to achieve this. Please help.
1st try with just Currenttuple - error 'Currenttuple can only be used with a named set'
iif(
(isgeneration([Time].currentmember,4)),
CASE
WHEN NOT ISEMPTY(
Crossjoin([Currency].Children,
{([Time].currentmember,[Org].currentmember,
[S Org].currentmember,[C Code].currentmember,
).Currenttuple
THEN Missing
ELSE Missing
END, Missing)
2nd try to create a named set with 'WITH' keyword - syntax error at WITH
/*with set [NewSet] as
'Crossjoin([TC].Children,
{([Fiscal].currentmember,[Organization].currentmember,
[Sales Org].currentmember,[Company Code].currentmember,
[Measures].currentmember,
[Product].currentmember,
[Channel].currentmember,
[Order Reason].currentmember,
[Country].currentmember,
[Billing Type].currentmember,
[Business Area].currentmember,
[Sales District].currentmember,
[Data Source].currentmember,
[View N/A]
iif(
(isgeneration([Fiscal].currentmember,4)),
Filter([NewSet], NOT IsEmpty([NewSet].CurrentTuple))
, Missing)Hi Tim,
Thanks for you reply and sorry for my delayed response. Actually there is one more requirement in this, which makes it a bit complicated. There are another set of members in the Measure dim called FXDirrate and FXIndrate. The logic is :
1. If data exists for the combination of a Currency.children, FXDirrate and current member of all other dims
then convert the value for Currency.children by diving by FXDirrate
2. If data exists for the combination of a Currency.children, FXIndrate and current member of all other dims
then convert the value for Currency.children by multiplying by FXIndrate
3. Then value of the calculated members will be sum(all FXDirrate converted + all FXIndrate)
Currency does roll up but as the data for its children can either be in Dirrate or Indrate and the sum needs to be taken after the conversion, there I am not able to proceed as I am not able to check the existence of data in individual children of currency as Isempty isn't working on a set . Thanks a lot for your help. -
Run a LabView 2012 executable without installing RTE.
I have a thumbdrive with a LabView executable that is ready to run. I want to be able to run this executable on different PC's without having to install the Run Time Engine on each machine. What dll do I need to have in the same directories as the executable so I can run the executable without actually installing the Run Time Engine. Thanks in advance.
SebastianLike the others said, there's no official way of doing this.
That said, the answer to your actual question is "lvrt.dll" and some of the others in the same folder (I don't remember offhand which folder it was. Look for it yourself). Note that there are some caveats:
The last time I did something like this was around LV 7.0. I didn't check in later versions, but I seem to recall someone who usually knows what he's talking about saying that it doesn't work at some point after 8.0.
Even if it does still work, this will only support things which are in those DLLs and don't have any other dependencies. That means things like VISA, DAQmx, other drivers and possibly even some of the display elements which are based on MESA for rendering or on other external resources.
It obviously won't be supported in any way.
Try to take over the world! -
Hyperion EPMA Currency Dimension
Hi,
I was facing issue while loading the hierarchies for Currency Dimension in EPMA through Interface tables.
I'm able to load Gen2 members, but unable to load Gen3 members which is the child of Gen2 members.
Whether there is any limit for currency dimension to be upload only till Gen2 ???
Thanks in advance.Hi,
Thanks for ur reply....
My concern is that, i'm unable to create the Gen3 members , since this is the requirement.
Please try the below Hierarchy, whether it is creating as the Dimension Type is CURRENCY.
Currency (Gen1)
All_Currency(Gen2)
USD(Gen3)
INR(Gen3)
Thanks in Advance -
Hello Experts,
I'm currently working on the currency translation, and right now I got a PDF on how to do it.
The issue faced right now is that the Currency Dimension is not created by default on BPC, and I need to know if BPC creates it automatically on some process or if I can create it manually without affecting a defined process.
Thanks for your answers on this.
Best Regards,
RodrigoHi,
Generally Apshell (System delivered Appset) will have RptCurrency Dimension which is a
Currency type dimension. It may or may not be directly useful to your scenario, depends on the
requirement please change accordingly. When you work on your scenario, you will copy APSHELL
appset and work so please work / change in the created / copied Appset.
Currency translation will work alongwith RATE Application, so in Rate Application you will find another Currency
type Dimension i.e., InputCurency Dimension. Wherein you will have all the currencies which you are
dealing with.
I hope you got my point. Still if you require any clarifications please let us know.
Raghu B.S. -
Is a currency dimension required for the Allocation engine to work?
Hello All,
Currently working on an application with no currency dimension, and I can't get the allocation script to work. Just wondering if the allocation engine will work without a currency dimension.
Thanks,
Hutch
Edited by: hutchinsm on Jul 29, 2011 4:24 PMJust found my mistake in my allocation logic. It works now, so the answer is No, the currency dimension is not required for the allocation engine to work.
-
We are not able to execute below procedure, plz help me ASAP.
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
CREATE OR REPLACE PROCEDURE GETCHART(RPT_CURSOR OUT RPT_PACKAGE.RPT_RESULTS,
V_VITALCHARTING VARCHAR2,
V_DOCIDPATIENTS VARCHAR2,
v_fromdate varchar2,
v_todate varchar2) AS
D1 VARCHAR2(500);
D2 VARCHAR2(500);
G1 VARCHAR2(500);
R1 VARCHAR2(500);
R2 VARCHAR2(500);
R3 VARCHAR2(500);
R4 VARCHAR2(500);
R5 VARCHAR2(500);
H1 VARCHAR2(500);
H2 VARCHAR2(500);
V_COUNT NUMBER;
RC VARCHAR2(100);
RMI VARCHAR2(100);
RMAX VARCHAR2(100);
R12 VARCHAR2(500);
REQ NUMBER;
V_MAX number;
v_idcount number;
RSEQ NUMBER;
RCH VARCHAR2(500);
BEGIN
INSERT INTO TEMPDATA
SELECT ROWNUM G, TIME1
FROM (SELECT distinct TO_CHAR(H.RECORDEDDNT, 'mm/dd/yy hh24:mi:ss') TIME1
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
and TO_DATE(to_char(h.recordeddnt, 'DD/MM/YYYY'),
'DD/MM/YYYY') BETWEEN
TO_DATE(v_fromdate, 'DD/MM/YYYY') AND
TO_DATE(V_TODATE, 'DD/MM/YYYY'));
SELECT MAX(ID) INTO V_MAX FROM TEMPDATA;
V_IDCOUNT := 0;
WHILE V_IDCOUNT < V_MAX loop
FOR J IN (SELECT id, ROWNUM G, vdate time1
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
D1 := D1 || 'COL' || J.G || ',';
D2 := D2 || '''' || J.TIME1 || '''' || ',';
END LOOP;
D1 := SUBSTR(D1, 1, LENGTH(D1) - 1);
D2 := SUBSTR(D2, 1, LENGTH(D2) - 1);
DBMS_OUTPUT.PUT_LINE(d1);
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
G1 := 'INSERT INTO GETDATA2 (IDSLNO,idcount,' || D1 || ') VALUES(' || RSEQ || ',' ||
V_IDCOUNT || ',' || D2 || ')';
--EXECUTE IMMEDIATE G1;
DBMS_OUTPUT.PUT_LINE(d1);
DBMS_OUTPUT.PUT_LINE(SUBSTR(D2, 1, LENGTH(D2) - 1));
DBMS_OUTPUT.PUT_LINE(G1);
EXECUTE IMMEDIATE G1;
FOR K IN (SELECT id, ROWNUM G, vdate time2
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
FOR I IN (select s.*, rownum hslno
from (SELECT v.CHARTNAME,
v.PARAMETERNAME_CS,
' ' || v.PARAMETERNAME PARAMETERNAME,
TO_CHAR(H.recordeddnt, 'mm/dd/yy hh24:mi:ss') TIME1,
CASE
WHEN IDSLNO_GN5029 IN (1040, 1041) THEN
CASE
WHEN TO_NUMBER(d.recordedvalue) <
TO_NUMBER(D.MINVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'L')
ELSE
CASE
WHEN TO_NUMBER(d.recordedvalue) >
TO_NUMBER(D.MaxVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'H')
ELSE
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'N')
END END ELSE d.recordedvalue END IMAGECHAR,
d.minvalue,
d.maxvalue,
D.UOMCODE
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
ORDER BY V.DISPLAYORDER_CS, V.DISPLAYORDER
-- v.PARAMETERNAME_CS,v.PARAMETERNAME
) s
where s.time1 = k.time2) LOOP
select count(1)
into v_count
from GETDATA2 d
where d.PARAMETERNAME_CS = i.PARAMETERNAME_CS
and PARAMETERNAME = i.PARAMETERNAME
and idcount = v_idcount;
IF V_COUNT = 0 THEN
RCH := I.CHARTNAME;
R1 := 'COL' || K.G;
R2 := '''' || I.PARAMETERNAME_CS || '''' || ',';
R3 := '''' || I.PARAMETERNAME || '''' || ',';
R4 := '''' || I.IMAGECHAR || '''';
RC := '''' || I.CHARTNAME || '''' || ',';
RMI := '''' || I.minvalue || '''' || ',';
RMAX := '''' || I.maxvalue || '''' || ',';
R12 := '''' || I.UOMCODE || '''' || ',';
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
H1 := 'INSERT INTO GETDATA2 (IDSLNO,UMCODE,idcount,CHARTNAME,minvalue,maxvalue,PARAMETERNAME_CS,PARAMETERNAME,' || R1 || ')' ||
' values(' || RSEQ || ',' || R12 || v_idcount || ',' || RC || RMI || RMAX || R2 || R3 || R4 || ')';
EXECUTE IMMEDIATE H1;
ELSE
R5 := 'COL' || K.G;
R4 := '''' || I.IMAGECHAR || '''';
H2 := 'UPDATE GETDATA2 SET ' || R5 || '=' || R4 ||
'WHERE PARAMETERNAME_CS=' || '''' || I.PARAMETERNAME_CS || '''' ||
' AND ' || 'PARAMETERNAME=' || '''' || I.PARAMETERNAME || '''';
EXECUTE IMMEDIATE H2;
END IF;
END LOOP;
end loop;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || ' (' || minvalue ||
' -- ' || maxvalue || ') ' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue != 0
and maxvalue != 0;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue = 0
and maxvalue = 0;
UPDATE GETDATA2 S
SET S.PARAMETERNAME_CS = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY PARAMETERNAME_CS)
and idcount = v_idcount;
UPDATE GETDATA2 S
SET CHARTNAME = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY CHARTNAME)
and idcount = v_idcount;
UPDATE getdata2 s
set s.parametername = ' PARAMETER'
where s.parametername is null
AND S.PARAMETERNAME_CS IS NULL;
v_idcount := v_idcount + 8;
D1 := null;
d2 := null;
end loop;
for i in (SELECT G.PARAMETERNAME_CS, G.IDSLNO
FROM GETDATA2 G
WHERE G.PARAMETERNAME_CS IS NOT NULL) LOOP
INSERT INTO GETDATA2
(IDSLNO, PARAMETERNAME)
VALUES
(I.IDSLNO - 1 + 0.5, I.PARAMETERNAME_CS);
END LOOP;
update GETDATA2 h set h.PARAMETERNAME_CS = null;
update GETDATA2 h set h.chartname = rcH;
INSERT INTO GETDATA1
SELECT CHARTNAME,
PARAMETERNAME_CS,
PARAMETERNAME,
COL1,
COL2,
COL3,
COL4,
COL5,
COL6,
COL7,
COL8,
COL9,
COL10,
MINVALUE,
MAXVALUE,
UMCODE
FROM GETDATA2
ORDER BY IDSLNO;
OPEN RPT_CURSOR FOR
SELECT * FROM GETDATA1;
END;
CREATE OR REPLACE PACKAGE "RPT_PACKAGE"
as
type RPT_RESULTS is REF CURSOR;
type RPT_VARRAY is VARRAY(2000) of VARCHAR2(2000);
END RPT_PACKAGE;
Execute
declare
type my_newcursor IS REF CURSOR;
begin
GETCHART(my_newcursor,'General Vital Sign','1145561',sysdate-1,sysdate);
end;Parwez wrote:
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
see a picture of my car.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
SQL and PL/SQL FAQ -
Hi,
Need help regarding Business rule scenario "How to populate data in "Target Form (plantype2)" from "Source Form(plantype1)" for a particular product/currency dimension combination selected in form1"
Scenario 1) : I have data for Product(Computer)/Currency(USD) dimension combination in Source Form
When i open Target Form and then select a Product(Computer)/Currency(USD) combination and then right click on form to invoke a Business rule to get data for this same product/currency combination from Source Form.
Scenario 2) : If there isnt any data in Source Form for product(Computer)/Currency(USD) combination, then the data for product(computer)/Currency(Default Currency) to be populated into Target Form.
The members in Currency Dimension (Shared Dimension) are USD & Default Currency.
Can anyone please help.
Thanks,
RajkumarAdding to what Celvin Kattookaran has said
You can either write a Business Rule / Calculation script with @XREF function and also you can check condition if there is data in USD then populate USD else "Default currency"
If you want that data in source to be available in target, then you can use @XWRITE in a rule from source cube to push the data to Target.
Amarnath
ORACLE | Essbase -
Not able to un-merge a dimension in webi report
Hello,
I'm facing an issue in webi reports. That is I'm not able to un-merge a dimension. I'm using BO 4.0 sp 6
I have 6 data providers in my webi report all of those 6 have sales order number in common. The report refreshes fine but a new requirement came in where I had to add another query (data provider) which also has the sales order number.
Now in the report I need to merge the new query's sales order number with the existing merged sales order number. When I un-merge the existing sales order number; webi just does not respond.
Any ideas? thanks in advance.
Regards,
samiqueThe way I resolved this is:
1- Removed Sales Order Object from all the existing queries. (the variables that were using the sales orders broke)
2- Added a new data provider query in webi; then added sales order objects in all the data providers.
3- Merged the Sales Order objects in the webi report.
4- fixed all the variables with calculations requiring sales order object.
5- Dragged the Sales Order object to the report body.
I hope to see an option in future where we don't have to do all this just to add a new data provider query to an existing report that uses merged dimensions. Because its just a waste of time re-doing things.
There should be an option to merge new dimensions to the existing merged dimensions in the webi report.
Regards,
samique -
Not able to execute scenario in RA 14.0
Problem Summary
Not able to execute scenario in RA 14.0
Problem Description
[oracle@dev-rtlrmadb src]$ ./SIL_RetailLoadControlSeedData.ksh
OracleDI: Starting scenario SIL_RETAILLOADCONTROLSEEDDATA 001 in context DEVELOPMENT_INSTALL ...
2015-02-08 12:01:01.026 ERROR ODI-1217 Session SIL_RETAILLOADCONTROLSEEDDATA (20404) fails with return code 7000.
2015-02-08 12:01:01.099 ERROR ODI-1134 Agent Internal encountered an error: ODI-1217: Session SIL_RETAILLOADCONTROLSEEDDATA (20404) fails with eturn code 7000. Caused by: ODI-1226: Step RA_Log_Error_File fails after 1 attempt(s).
When checking in $MMHOME/error directory , the log is showing following error :-
Package Name-> SIL_RETAILLOADCONTROLSEEDDATA
Step Name-> SIL_RetailInitial_C_ODI_PARAM_Load
Error Details->
ODI-1226: Step SIL_RetailInitial_C_ODI_PARAM_Load fails after 1 attempt(s).
ODI-1240: Flow SIL_RetailInitial_C_ODI_PARAM_Load fails while performing a Loading operation. This flow loads target table C_ODI_PARAM.
ODI-1228: Task SS_0 (Loading) fails on the target ORACLE connection ORACLE_BI_APPLICATIONS_RA_INSTALL.
Caused By: java.sql.SQLSyntaxErrorException: ORA-01918: user 'radm01' does not exist
DB user exists. I'm able to login via sqlplus. Have checked in Physical schema and Logical schema also. All required Data Servers exeists in Topology -> physical / locical schema-> oracle. and tested the connection every thing is working properly.
Error Codes
ODI-1226 , ODI-1240 , ODI-1228 , ODI-1217 , ODI-1134 , ODI-1232
Problem Category/Subcategory
Retail Merchandising Analytics Issues
Uploaded Files
Template Question Responses
1) ### Steps to Reproduce ###
Go to $MMHOME/src .
Execute the ./SIL_RetailLoadControlSeedData.ksh from prompt. This gives the mentioned error.
I'm currently configuring Oracle Merchandising Analytics 14.0 . Referring guide " Oracle® Retail Analytics Installation Guide Release 14.0 E50594-05 ".
I'm at step number 11 ,
page no 58.Please help. Its urgent.
-
my phone is stuck in recovery mode, am i able to restore without loosing all contacts? p.s i dont have my original computer
Thanks, I figured that out, so I went ahead and restored it, which also didn't work! It gave me an error 3194, which I also can't figure out.
-
Subject: Displaying key figures without currency unit in BEX reports
Hello,
Is it possible to display key figures without currency unit in BEx reports? For example; Material Costs 1000 EUR
should be shown as 1000. Currency unit EUR and also scaling factor (*1000 EUR) does not interest us.
When we use display options in query properties, we just see an option of displaying key figures with/without scaling factors, which does not solve our problem.
Thanks for your reply.
Regards,
Nuran AdalHi Eugene,
thank you very much for your quick reply. We have very detailed reports with min. 10 columns, I should have defined 10 more formula columns to realize this (NODIM), but anyway there is no other way to do this, am I right?
Best Regards,
Nuran -
I am not able to execute the transport.send(message)
I am not able to execute the transport.send(message) when trying for sending mail. I am getting error like this : -
javax.mail.SendFailedException: Sending failed; nested exception is: javax.mail.MessagingException: Could not connect to SMTP host: 10.175.80.50, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect
Please help me on this to resolve this issue asap. thanksHi Vinod,
public void SendMail( )
//@@begin SendMail()
// Specify the host name of the mail server
String host ="----
IWDMessageManager messageMgr = wdControllerAPI.getComponent().getMessageManager();
// Initialize Session
Properties props = System.getProperties();
props.put("mail.smtp.host", host);
props.put("mail.smtp.auth", "true");
Authenticator auth = new Auth();
Session session = Session.getInstance(props, auth);
// Create new MimeMessage
MimeMessage message = new MimeMessage(session);
try
// Set the From Address
String from = wdContext.currentContextElement().getCtx_From();
message.setFrom(new InternetAddress(from));
// Set the To Address
String to = wdContext.currentContextElement().getCtx_To();
Address ar[] = new Address[1];
ar[0] = new InternetAddress(to);
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
// Set the Subject
message.setSubject(wdContext.currentContextElement().getCtx_Subject());
// Set the Text
message.setText(wdContext.currentContextElement().getCtx_Text());
Transport tr = session.getTransport("smtp");
tr.connect("Put again here Host Name", Port Noumber, "userid", "password");
tr.sendMessage(message, ar);
}catch (AuthenticationFailedException e){
messageMgr.reportException(e.toString(),false);
}catch (AddressException e) {
messageMgr.reportException(e.toString(),false);
} catch (MessagingException e) {
messageMgr.reportException(e.toString(),false);
}catch (Exception e){
messageMgr.reportException(e.toString(),false);
//@@end
And also create the class Auth() like
public class Auth extends Authenticator {
public PasswordAuthentication getPasswordAuthentication()
String username = "userID";
String password = "Passwod";
return new PasswordAuthentication(username,password);
Please check it i think i will work. Also please use constant value for the to, from, subject and text. -
I send out monthly invoices and statements via an accounting package (as attachments). This creates 300+ open emails which requires that I switch to each open email and click send. How am I able to send without entering each message and pressing the send button?
Thunderbird simply does not support the sending of mail from Third party applications. only the creation. This is a security feature that stops a virus spamming your address book.
If you want automation, use windows live mail. -
Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan MuthuramanHi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
HP Laserjet CP2025 Windows Server 2008 R2 Universal Printer Driver problem
Is there support for Windows Server 2008 R2 for the CP2025n printer, I've been trying to get it to work with a standard TCP port with the universal driver but no luck. Any ideas?
-
I think I have gotten around the javai.dll problem by starting weblogic server from the setenv.cmd and startWeblogic.cmd. Is this right? I am trying to get the example appps to work but tehy won't. It keeps telling me the classes are not found. I hav
-
Ordering prints of photos that were downloaded from the internet
Hey I'm new here and I wanted to order prints of a bunch of photos in my iphoto library that were not taken with my camera. I saved pictures and screenshots of different bands that I got online to my library and wanted to print them out so I could pu
-
premiere elements 11 will not let me import and photo's or video. None of my hard drives are shown
-
Create and bind javafx objects out of java
hello, iam start to learn javafx and cant find the right way to do what i want. the goal is: i have written a graph datastructure in java and want to parse a xml file. for every String in the xml file a new node in the graph should be created. this n