Spry examples not working when sitting on UNIX servers

Hi All,
I've been looking at the SPry dynamic table examples with the
intention of using this with my own xml files. When viewing these
samples locally it displays fine. When uploading onto our server,
it displays nothing. There is a quick flash of the first two rows
but then won't parse the XML into the table structure and then is
blank.
As I said works fine running locally on Win XP using IE6.0
but using IE6.0 running off a UNIX server, nothing.
Baffled. Can anyone help?
Kind regards
Paul Pounder

Hello Paul,
Maybe this is just a basic permission problem. Maybe the new
server is configured to serve the .xml files, the read/write
permissions are correct or the mime-types for this type of file is
not correct.
In this situation you should simply try into the browser to
manually call the XML data file and see if the file is correctly
delivered. In case this scenario works then please give us an URL
to take a look too.
Regards,
Cristian

Similar Messages

Server Group not working when one of Job Servers is down

I have a Server Group of two job servers. They have the same version 12.2.2.3 and are attached to the same Local Repository of version 12.2.2.0.
When I execute a batch job (from the Designer) and explicitly specify on which job server it should run, it works fine for either job server. Also, when I specify Batch Job execution on Server Group, it works fine.
However, when I shutdown one of the Job Servers, and then try to execute the job on Server Group, I'm getting two error messages, BODI-1111011 that one Job Server is down, and BODI-1111009 that another Job Server has failed.
At the same time, when I check the Server Group in the Management Console, it shows that the allegedly failed Job Server is in the status green.
That error is not reflected in a job server eveng log, nor there is anything written to webadmin log, not in the job trace (the latter isn't created at all).
Is there anything I can do at this point except raise a support message?

The issue was with different users for Local Repository in Admin and Job Server config. I discovered it when trying to run the job from Admin Console. Designer is probably not the best diagnostic tool for such kind of issues.

The built-in dictionary on my iPad only works with certain sites. What do I need to do so that I can it all the time. (For example, it does not work when I read e-newspaper.)

What do I need to do so that I can use the built-in dictionary all the time? My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.

Rikirannu wrote:
My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.
Are you talking about the English dictionary? Mine seems to work ok on the AZ republic web page. Does yours not work on all webpages? Does it not work when you type an English word in Notes and then do select and define?

Spry Validations not working javascript:Spry.Widget.Form.destroyAll() in popup

iam using spry to validate controls in a popup.in that
validations are working fine but the problem is when we click
cancel button also thse validations are firing...
i am using
javascript:Spry.Widget.Form.destroyAll() to destroy
validations...but it is not working.
when we click on cancel button how to destroy the validations
as well as hide the popup...
can anyone help me...

Thanks! (While I'm REALLY not comfortable with code yet (working on it :-) I atleast understood that it was a PHP issue (yay).
Studied the code in the examples in the book. And added:
<pre>
<?php if ($_POST) {print_r($_POST);} ?>
</pre>
It worked. (I'm local testing, with no connection to a database yet. Just trying to get the basic pages to work first.)
Hopefully the more I work on all of this, the more I'll begin to "get it"! And I'm almost up to the Chapter on PHP. So, I'm hoping to will become clearer as I read on.
Thanks for the help in pointing me in the right direction!!!
-- Jami

Help! Javascript not working when object moved from one page to another!

Hello all:
I am new to Adobe Livecycle Designer (version 8.0). I have created a 3 page interactive pdf form with numerous objects (text fields, radio buttons, drop-down boxes, etc.), that our business wants to begin using soon.
I am having difficulty with some of my Javascript not working with a few of my objects on page 2 of the form. Specifically, there is a drop-down box for "Country" on page 2 of my form. When the user selects, for example, "United States" from the list, I have Javascript that is supposed to change the "Currency" drop-down box rawValue to "US Dollars" accordingly (upon the change event).
I think my Javascript syntax is proper, but I am not certain. Here is my simple Javascript associated with the "Country" drop-down box (Note: rawValue 80 = "United States" and rawValue 105 = "US Dollars"):
form1.Page1.cmbContactInfoCountry::change: - (JavaScript, client) -
if (this.rawValue == 80) {
     cmbCurrency.rawValue = 105;
This seems pretty straight forward and it WORKS when my "Country" drop-down box is moved to page 1 of the form, but it WILL NOT WORK when I move the "Country" drop-down box back to page 2 of the form (which is where it belongs).
Does anyone have any suggestions or solutions? I have spent probably 6-8 hours racking my brain trying to figure out why it works when on one page, but it does not work when move to a different page. I am guessing that I may have corrupted something OR that I am not fully addressing the proper name of the object?
Please help!
Frustrated and helpless near Chicago!
Taylor T

Hi Jono:
Thank you for your quick reply.I was able to obtain the full name of the cmbCurrency object using the method you taught me. That is brilliant! Great short-cut tool.
Unfortunately, I am still having issues with getting Javasript for the cmbCountry object to work with the cmbCurrency object. I haved pasted my new Javascript below.
JavaScript for cmbCountry object:
//UNITED STATES
if (this.rawValue == 1) {
          xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 1;
else
//CANADA
if (this.rawValue == 2) {
          xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 2;
I have checked the "Specify Item Values" checkbox of the cmbCurrency drop-down object and Value 1 = "US Dollars" and Value 2 = "Canadian Dollars".
When I select "Canada" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object is changed to "US Dollars" (when it is clearly defined as "Canadian Dollars"). When I select "United States" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object stays blank for uknown reasons. Very strange.
Since I am not able to further explain in detail on what I am experiencing, I have posted a link to my file below (I just signed up for an account at ShareFile). I would forever be indebted to you if you can help me figure this out!
https://thomptk.sharefile.com/?cmd=d&id=07ede2fe11db4549

Hyperlink is not working when running on sun solaris OS

Hi,
I have Created PDF file using oracle reports 2.5 version and included hyperlinks in reports which will open files located on our intranet server(http://cup2.ngc.co.uk). Hyperlinks are working properly when I generated report on window xp machine but not working when I compiled and executed report on solaris unix server(reports 6i).
please let me know why hyperlinks is not working when executed on solaris((5.8). do we need any setup to work hyperlinks on unix server.
Thanks in advance,

Ok, there are 2 docs i've tried.
A = Doc created originally from MPB Pages with hyperlink
B = Doc created from iPad Pages with hyperlink
A was transfered to iPad Pages using iTune. I emailed A as pdf from iPad to gmail and reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, not working. BUT, when i read A using MBP gmail, the link is ACTIVE, i click on the link and it brings me to the correct webpage.
As for B, after the page was created with links on iPad, i emailed B as pdf from iPad to gmail, reopen the file on iPad using Quickoffice / PDF Reader Lite, the link is NOT active, and this time, when i read B using MBP gmail, the link is NOT active as well.
Weird huh? I'm starting to sense that is the problem with iPad Pages. What say you?

SP2013: OK button not working when editing Settings on List app

Hi, all! Currently running Sharepoint 2013 under Server 2008 R2. My client is Win7 Pro/64-bit running lastest Firefox, Chrome & IE11. I am currently a Domain Admin for our corp domain.
Long story short, I've created a test List app. When I attempt to add a column to the layout of the custom list app, nothing happens when I click the OK button to save the app. No access spinning, no errors on-screen (also none visible when I view
the source of the SP page or header), no nothing. The highlight of the button changes as expected, but nothing else. The Cancel button will Cancel as expected, but OK does nothing whatsoever.
My current permissions include member of Domain Admins, Site Owners (Full Control), and Visitors (Read). A Check Permissions on myself yield the following:
Full Control | Given through the "~site~ Owners" group.
Read | Given through the "~site~ Visitors" group.
Edit | Given through the "~site~ Members" group.
(Note: "~site~" is replacing the actual SP2013 site name above)
I'm thinking it has something to do with effective permissions. I just added myself to the Owners group this morning with no effect. I've also tried both Compatibility mode on and off in IE, and Firefox and Chrome don't work, either. Suggestions
are most welcome as I'm at the point where I'm not sure if IE11 is causing a problem or if it's actually an effective permissions problem that's preventing me from saving any column changes to the List app above.
Thanks, guys!
Steve

Hi Steve,
From your description, my understanding is that OK button does not work when you create a new column.
Please check if you get any JS error after you click OK button by pressing F12 to OP developer tool.
Besides, please try to create a new column with steps below:
1.
Click LIST tab in the Ribbon.
2.
Click Create Column in Mange Views section.
3.
Create your column in the dialog.
4.
Click OK button.
In addition, please confirm these points below:
1.
Test your issue in another list.
2.
Test your issue with another computer.
3.
Test your issue with another account.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

JSObject programming was not working when compiled in JSDK1.4.2_06

JSObject programming was not working when compiled in JSDK1.4.2_06.
But problem solved when i compiled with JSDK1.3.1_15 and tested with JVM 1.3.1_15.
Still I could not run the class file generated in JSDK1.3.1_15 in JVM 1.4.2_06.
What do you think happened across the SDK versions? Shouldn't the JSObject
and other classes be part of the browser JVM.
I want to know whether JSObject supports in JSDK1.4.2_06.
It goes into the loop. It neither say error nor execute.

Do not spam the site by posting to 4 forums

VideoPhoneLabs example not working

Dear dev-team, could you also give more information about why
the example-application (VideoPhoneLabs.swf) does not work, when I
upload all the assets (not reg.cgi, while I want to use the
Stratus-service) to a server (
http://work.joeyvandijk.nl/stratus/VideoPhoneLabs.html).
I am connected to the Stratus-webservice, but I get an
idManagerError but does not know how I can solve this.
I think it has to do with my id, but when I login to
adobe.com and try to retrieve an ID I get the same which I am using
at above example. So, I think my ID is not blocked or something.
And I know that the Stratus-webservice is not down while your
online version of the VideoPhoneLabs is working.
I see in my error:
Error #2048: Schending van beveiligingssandbox:
http://work.joeyvandijk.nl/stratus/VideoPhoneLabs.swf
kan geen gegevens laden van
rtmfp://stratus.adobe.com/bc25bb58c9cf187e4178b40e-c16df88ec798/?identity=80b46c214f4c830 f28186fa40febc0a4a8c323393958ea99a0075b228d870e50&username=joeyvandijk
which says that it cannot load data from the Stratus-service
due to a SecurityError.
So, I cannot run it locally OR on a webserver. Do you have
some tips what could be the cause?
Thnx in advance!
:D

Hi,
I am trying the VideoPhoneLabs app, but still do not work.
Please give some advices.
I have done the procedure according to ReadMe.txt, then
reg.cgi copied into my local web server. After that i got some
error message as following when i accessed to it from another pc.
[In the debugger window of FP10]
TypeError: Error #1009: null <ono: sorry for japanese, i
deleted them>
at VideoPhoneLabs/onDisconnect()[C:\Users\ono\Documents\Flex
Builder 3\VideoPhoneLabs\src\VideoPhoneLabs.mxml:548]
at
VideoPhoneLabs/idManagerEvent()[C:\Users\ono\Documents\Flex Builder
3\VideoPhoneLabs\src\VideoPhoneLabs.mxml:484]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at HttpIdManager/httpFault()[C:\Users\ono\Documents\Flex
Builder 3\VideoPhoneLabs\src\HttpIdManager.as:120]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()[C:\autobuild\3.2.0\framewor ks\projects\rpc\src\mx\rpc\AbstractInvoker.as:170
at mx.rpc.http::HTTPService/
http://www.adobe.com/2006/flex/mx/internal::processResult()[C:\autobuild\3.2.0\frameworks\ projects\rpc\src\mx\rpc\http\HTTPService.as:852
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::resultHandler()[C:\autobuild\3.2.0\frameworks\ projects\rpc\src\mx\rpc\AbstractInvoker.as:188
at
mx.rpc::Responder/result()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\Responde r.as:43]
at
mx.rpc::AsyncRequest/acknowledge()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\ AsyncRequest.as:74]
at
DirectHTTPMessageResponder/completeHandler()[C:\autobuild\3.2.0\frameworks\projects\rpc\s rc\mx\messaging\channels\DirectHTTPChannel.as:403]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
[In the apps STATUS window]
Connecting to rtmfp://stratus.adobe.com
NetConnection event: NetConnection.Connect.Success
Connected, my ID:
c0e8c83410b0dbf0b66644b8e2418abb67a0d3a31ba42d55af961c140db0bf70
ID event: idManagerError
Error description: HTTP error:
(mx.messaging.messages::AcknowledgeMessage)#0
body = "<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2
Final//EN">
<html>
<head>
<title>Index of /VideoPhoneLabs</title>
</head>
<body>
<h1>Index of /VideoPhoneLabs</h1>
<table><tr><th><img
src="/icons/blank.gif" alt="[ICO]"></th><th><a
href="?C=N;O=D">Name</a></th><th><a
href="?C=M;O=A">Last
modified</a></th><th><a
href="?C=S;O=A">Size</a></th><th><a
href="?C=D;O=A">Description</a></th></tr><tr><th
colspan="5"><hr></th></tr>
<tr><td valign="top"><img
src="/icons/back.gif" alt="[DIR]"></td><td><a
href="/">Parent
Directory</a></td><td> </td><td
align="right"> - </td></tr>
<tr><td valign="top"><img
src="/icons/unknown.gif" alt="[ ]"></td><td><a
href="AC_OETags.js">AC_OETags.js</a></td><td
align="right">24-Mar-2009 17:35 </td><td
align="right">8.4K</td></tr>
<tr><td valign="top"><img
src="/icons/text.gif" alt="[TXT]"></td><td><a
href="VideoPhoneLabs.html">VideoPhoneLabs.html</a></td><td
align="right">24-Mar-2009 17:35 </td><td
align="right">4.2K</td></tr>
<tr><td valign="top"><img
src="/icons/unknown.gif" alt="[ ]"></td><td><a
href="VideoPhoneLabs.swf">VideoPhoneLabs.swf</a></td><td
align="right">24-Mar-2009 17:35 </td><td
align="right">735K</td></tr>
<tr><td valign="top"><img
src="/icons/unknown.gif" alt="[ ]"></td><td><a
href="playerProductInstall.swf">playerProductInstall.swf</a></td><td
align="right">24-Mar-2009 17:35 </td><td
align="right">657 </td></tr>
<tr><th
colspan="5"><hr></th></tr>
</table>
<address>Apache/2.2.9 (Fedora) Server at 192.168.1.101
Port 80</address>
</body></html>
clientId = "DirectHTTPChannel0"
correlationId = "D8807C92-CB35-13AA-386C-3B10784B610C"
destination = ""
headers = (Object)#1
DSStatusCode = 200
messageId = "C3AF012E-AC2B-464D-C982-3B1078DAB158"
timestamp = 0
timeToLive = 0
Disconnecting.
Hanging up call
NetConnection event: NetConnection.Connect.Closed
ID event: idManagerError
Error description: HTTP error:
(mx.messaging.messages::AcknowledgeMessage)#0
body = "<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2
Final//EN">
<html>
<head>
<title>Index of /VideoPhoneLabs</title>
</head>
<body>
<h1>Index of /VideoPhoneLabs</h1>
<table><tr><th><img
src="/icons/blank.gif" alt="[ICO]"></th><th><a
href="?C=N;O=D">Name</a></th><th><a
href="?C=M;O=A">Last
modified</a></th><th><a
href="?C=S;O=A">Size</a></th><th><a
href="?C=D;O=A">Description</a></th></tr><tr><th
colspan="5"><hr></th></tr>
<tr><td valign="top"><img
src="/icons/back.gif" alt="[DIR]"></td><td><a
href="/">Parent
Directory</a></td><td> </td><td
align="right"> - </td></tr>
<tr><td valign="top"><img
src="/icons/unknown.gif" alt="[ ]"></td><td><a
href="AC_OETags.js">AC_OETags.js</a></td><td
align="right">24-Mar-2009 17:35 </td><td
align="right">8.4K</td></tr>
<tr><td valign="top"><img
src="/icons/text.gif" alt="[TXT]"></td><td><a
href="VideoPhoneLabs.html">VideoPhoneLabs.html</a></td><td
align="right">24-Mar-2009 17:35 </td><td
align="right">4.2K</td></tr>
<tr><td valign="top"><img
src="/icons/unknown.gif" alt="[ ]"></td><td><a
href="VideoPhoneLabs.swf">VideoPhoneLabs.swf</a></td><td
align="right">24-Mar-2009 17:35 </td><td
align="right">735K</td></tr>
<tr><td valign="top"><img
src="/icons/unknown.gif" alt="[ ]"></td><td><a
href="playerProductInstall.swf">playerProductInstall.swf</a></td><td
align="right">24-Mar-2009 17:35 </td><td
align="right">657 </td></tr>
<tr><th
colspan="5"><hr></th></tr>
</table>
<address>Apache/2.2.9 (Fedora) Server at 192.168.1.101
Port 80</address>
</body></html>
clientId = "DirectHTTPChannel0"
correlationId = "7863A499-3906-0CC3-1AED-3B1078EAAFFE"
destination = ""
headers = (Object)#1
DSStatusCode = 200
messageId = "716811AE-4A81-3468-4DAA-3B107945F936"
timestamp = 0
timeToLive = 0
Disconnecting.
Hanging up call
Thank you for any advices.
Ono Keiji

Excel Functions Do Not Work When Data Source is BW

Hello,
My platform is, BOBJ BI 4.0. Data source is SAP BW. BW is connected to XCelsius with BEx. My problem is, excel functions do not work when data source is BW. For example, Excel cell A1=quantity1 B1= quantity2 C1= excel function "=A1+B1" When data source is Excel, for example A1=5, B1=9 C1 automatically equals to 14. (There is no problem when data source is Excel) But, in BW, for example when BW set values to A1=5, B1=9, the system does not calculate C1. C1 always equals to initial value, the system does not care any excel calculation when data source is BW. Any guess for my problem? Thank you for your effort.

Hi,
As you are using very simple formula,it will work no matter which source you are consuming.As mentioned,try to place a simple component(Eg:spreadsheet),just to check whether you are getting the right calculated value or not.
As you are using BW as source,the Preview option will not show the runtime data,so you need to publish in Portal to check whether the calculation happened or not.
As far as I know only few fromulas are supported in Xcelsius,but these kind of simple formulas are very much supported.
Rgds,
Murali

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

Alerts are not working for Site collections in a content database

Hi,
We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
or changes happen in the list/document library.
We have tried with Immediate as well as scheduled alerts both are not working.
FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
Any help would be appreciated.
Thanks
Ramkumar

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Youtube does not work when i am using wifi on iphone 4

the youtube does not work when i use wifi. it works perfectly when i use 3 g network ..

At home when i use my Wi-Fi it work normal, but as soon as i go out, for example on the bus or at work it keeps saying "Cannot connect to Youtube".

Keyboard backlighting not working when using Windows in Boot Camp

Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary

Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.

Multitouch on track pad not working when running Windows 8 in boot camp

Does anyone know a work around on how to resolve the issue of more than one fingers on the trackpad? For example, I use one finger to click a window then another finger to slide/move the window to a different location on the screen. This does not work when running Windows 8 in Boot Camp latest version. Any suggestion is much appreciated.

very very few gestures are supported in windows
https://discussions.apple.com/message/24548533#24548533
if it's a limitation from ms you need to contact them
if it's a limitation from apples drivers you can use feedback channel
http://www.apple.com/feedback/

Spry examples not working when sitting on UNIX servers

Similar Messages

Maybe you are looking for