Spry Tooltips That Don't Extend The Page

I am working on an intranet based returns system, and I am having a problem with tooltips that are 600px wide. If the tooltip is triggered near the edge of the page the tooltip will make the page wider, causing a scrollbar appear. It is impossible to scroll the page due to the tooltip vanishing once you move the mouse away.
I can't see any options to prevent this from happening. Does anyone have any clever ideas?
Cheers,
Steve

Hi Beth,
Thanks for the suggestion, it appears you are getting around this by offsetting each tooltip. This works for you as your triggers are small and in known locations.
I am using a repeated table cell as the trigger to load html content into a panel which is the tooltip:
<script type="text/javascript">
<!--
var hp = new Spry.Widget.HTMLPanel("tooltip");   
var tt = new Spry.Widget.Tooltip("tooltip",".itrigger", {showDelay: 500, hideDelay:500, closeOnTooltipLeave: true, offsetX: "0px", offsetY:"0px"});
var tt = new Spry.Widget.Tooltip("tooltip",".sttrigger", {showDelay: 500, hideDelay:500, closeOnTooltipLeave: true, offsetX: "0px", offsetY:"0px"});
var observer =  {onPreLoad: function(){hp.setContent("<img src=\"/images/ajax-loader.gif\" />");}};
hp.addObserver(observer);
-->
</script>
This means my tooltip can appear all over the place. I will a large negative offset and see if its just as functional.
Cheers,
Steve

Similar Messages

  • I seem to have lost the red, yellow and green dots that are in the upper left hand corner that close  or minimize the page.

    I seem to have lost the red, green, and yellow dots that are in the upper left hand corner that close or minimize the page.  How can I get them back?

    You may have to try a general OS X troubleshooting process to see if the issue goes away by doing this...
    Have you tried: starting the computer in SafeBoot mode, with shift key held down; a login screen should appear after a time, and then the regular desktop. At this point, locate Disk Utility in utilities folder, and run 'repair disk permissions' on the startup volume, usually the name given the hard disk drive as it appears on desktop. After Disk Utility is finished the permissions repair, restart the computer normally.
    ...The iTunes player has free support only through the duration of the hardware product's complementary or AppleCare extended plan coverages, so though you can download a newer version, that is not the same as free support for an issue. However, the iTunes Store or App Store has a different factor for their product.
    http://www.apple.com/support/itunes/
    There is an iTunes area in Apple Support Community discussions for more topics like this; except for when they involve a hardware product where an OS X is involved. If your computer is NOT a powerPC (an 'intel'-mac) the topic would more naturally need to be posted where that hardware and later supported OS X version topics get seen. So that is why one asks 'on what Mac running what version...' instead of writing four paragraphs in a wide angle reply. The details about your iMac and the OS X say more; without them, more questions arise.
    Good luck & happy computing!

  • I'd like to remove a thin line that is part of the page design in one of Aperture's photo books.  I can't seem to make it happen.  Any suggestions?

    I'd like to remove a thin line that is part of the page design in one of Aperture's photo books.  I can't seem to make it happen.  Any suggestions?

    The mouse that came with my Mac does not have a right click feature. When I try to highlight and click, it just opens the link I don't want anymore. What I want to do is remove unwanted links from the top bar. For example, I no longer use GoodSearch or myEarthLink, but I can't delete them. There are also some links that never should have found their way up there, and I don't know how they ended up there, and I can't remove them either. I've read through a ton of questions and answers, and I can't find one that addresses the problem. With my Safari browser, all I have to do to remove an unwanted link is to click and drag it to the trash. It doesn't appear to work that way with Firefox, to my chagrin. I hope this better explains my question. Maybe that will give you a better insight into a solution.

  • Working in muse when I go to right click I don't get the Page Properties menu how do I change ?

    Working in muse when I go to right click I don't get the Page Properties menu how do I change this ?

    Hello,
    What do you right click on? Usually you should be able to see Page Properties when you right click on a page from the plan mode, or you can also find page properties if you open the individual pages and then go to Page -> Page Properties. However, if you are in the plan mode and you try to use the Page -> Page Properties, that won't work and the "Page Properties" option would be grayed out.
    Hope this helps.
    Cheers
    Parikshit

  • How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    Start by establishing a permanent fixed Ethernet cable connection from one of the available LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme.
    Ethernet cabling can be run up to 300+ feet or 100 meters, so you should be able to locate the AirPort Extreme exactly where it will be needed to provide more wireless signal coverage.
    Configure the AirPort Extreme to "create" a wireless network using exactly the same wireless network name, same wireless security setting, and same wireless network password that the ATT wireless is using.
    The final step is to insure that the AirPort Extreme is configured to operate in Bridge Mode, so it will work correctly with the ATT modem/router.
    If you need more specific steps, we need to know what operating system you are using on your Mac or PC. If you have a Mac and do not know which operating system it is using.....click the Apple icon in the upper left corner of the screen and then click About This Mac, and post back with the OS X version number that you see there.

  • TS3991 iWork doesn't seem to recognize that I already have the pages, keynote, and numbers apps so I can't use iCloud to sync my documents.  How to get my apps recognized?

    iWork doesn't seem to recognize that I already have the pages, keynote, and numbers apps so I can't use iCloud to sync my documents.  How to get my apps recognized?

    Do you have both the OS X and iOS versions of each of them?

  • How can I recover documents that were stores in the pages app?

    I have an original iPad. This evening, as I was using it, I got a message that an update was available for pages. I selected "update". It attempted to install the new pages and froze. I connect to iTunes to try to get it back to old version of pages (the new versions won't work on the original iPad) by restoring to back-up. That resulted in deleting the pages app.
    Ahhhh!!!! I need my documents! They had been backed up to iTunes and it was recently backed up to iCloud.
    Someone please help me figure out how to find my docs!!!
    THANK YOU

    Basics of File Recovery
    Files in Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location.  OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone.  Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

    hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

    Connect an Ethernet cable from one of the LAN <--> ports on the back of the Sky router to the WAN (circle of dots icon) port on the back of the Time Capsule. This connection must be maintained at all times.
    Then, using the setup "wizard" on your iMac illustrated below, configure the Time Capsule to create a wireless network that uses the exact same wireless network name and password that the Sky router is using.
    You can get the setup wizard going in several different ways, but the simplest might be to click the WiFi icon at the top of the Mac's screen and then click on Time Capsule under the heading of New AirPort Base Station.
    The wizard will open up and analyze the network, then the suggest the correct setup. The example below shows an older AirPort Express that is about to be setup in the same way. You will see a Time Capsule icon on your screen when you run the setup wizard.

  • Would anybody think that for all of the pages of apps, for each time that you swipe, the backround would change..... You could disable this in settings

    Would anybody think that for all of the pages of apps, for each time that you swipe, the backround would change..... You could disable this in settings.

    Tell Apple: http://www.apple.com/feedback/iphone.html

  • Somehow my MacBook (vintage) is now showing a black text box that continues to type and also speak what I am doing.  There is also a blk border text box that follow me in the page itself.  How do I get this turned off?

    Somehow my MacBook (vintage) is now showing a black text box that continues to type and also speak what I am doing.  There is also a blk border text box that follow me in the page itself.  How do I get this turned off?

    What version of Mac OS X? Do you have the original (or any) system disk?

  • HT4623 I've installed several apps that won't rotate to landscape. Lock rotation is off in settings. Is it the apps that don't have the ability to rotate or some setting on my iPad3? Thanks, CH

    I've installed several apps that won't rotate to landscape. Lock Rotation is off in settings. Is it the apps that don't have the ability to rotate or some setting on my iPad3? Thanks, CC

    Not all Apps offer that feature...
    Orientation Lock
    Settings > General > Lock Rotation..
    Double-press the home button...
    Swipe to the right until you get to the Portrait Orientation Button...
    Understanding the Side Switch
    http://support.apple.com/kb/HT4085

  • The old Flash SWF files that don't update in pages created with templates problem

    I hate to even ask this question again because I know it's
    been posted many times. I've read all the answers I could find but
    I'm afraid I still need help. I'm using Dreamweaver CS3 on a Mac.
    I've gone in preferences and unchecked "insert using browser-safe
    scripts" and "Convert tags" and I've tried to make my paths to the
    SWF files relative to the site root but I just can't get it to
    work.
    There are about three articles on what the Site Root path can
    be used for and why it's good or bad. I've read all those and I
    guess I'm dense because I just can't figure it out. I select site
    root from the "relative to" drop down menu and it makes no
    difference whatsoever. I look at the code and it seems OK. This is
    what it looks like:
    <param name="movie"
    value="/public/Images/Regional_Strength/Americas/Americas map.swf"
    />
    <param name="quality" value="high" />
    <embed
    src="/public/Images/Regional_Strength/Americas/Americas map.swf"
    quality="high" pluginspage=
    There are no ... before the directories and that's what it's
    supposed to look like. The files still don't show. Part of me has
    to wonder how the heck the html file would know which /image
    directory the swf file is in because this particular site is one of
    many self-contained site directories that sit in my public folder,
    each site has it's own image directory. I thought maybe I'm
    supposed to put the SWF files in the "image" directory right in the
    first level of the public directory. I moved the files in there
    changed the code to:
    <param name="movie" value="/public/Images/Americas
    map.swf" />
    <param name="quality" value="high" />
    <embed src="/public/Images/Americas map.swf"
    quality="high" pluginspage=
    It doesn't work. Like I said, after reading the three or so
    articles about the site root on the Adobe Help pages, I still don't
    understand. I'd appreciate someone clarifying this for me.
    Thanks

    > <param name="movie" value="/public/Images/Americas
    map.swf" />
    As a random educated guess, Is your local site folder defined
    to the correct
    folder? If it isn't, then dw can't make correct site root
    relative paths.
    Jumping to this from seeing the /public/ folder in the above
    path.
    Define the local site folder to the folder that directly
    contains the site's
    homepage index file.
    Use the "host directory" line in the remote site info to
    correct for any
    required subfolder in the ftp setup. If public files need to
    be placed in a
    subfolder on the remote named public or public_html or htdocs
    or www or
    similar, put that folder name into the "host directory" line.
    Also- to avoid problems adopt a file and folder naming
    convention that
    doesn't cause you to tear your hair out.
    Americas map.swf
    There is NO such thing as a blank space in a url. So don't
    use blank spaces
    in file or folder names.
    A conservative naming convention would be to use only
    a-->z and 0-->9 and
    the _underscore. No blank spaces, no punctuation, no mixed
    case.
    Right-click on the file or folder in the dw Files Panel and
    pick rename.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Sites that don't support the Mac

    "Wheel of Fortune" on TV advertises scrabblecubes.com where we can supposedly play a word game by that name. At the site, operated by worldwinner.com, we learn that the games only support windoze with explorer. I went to the site of each of the 7 advertisers at the bottom of the page and emailed them that I was disappointed that they did not support the Mac.
    We need to let people know that we care.

    WorldWinner games use Active-X components that only work with Microsoft Internet Explorer version 6.0 and higher on personal computers running the Microsoft Windows operating system.
    What they are saying is that they download a pc program to play the game. This is a total security hole.! One should be glad that mac os x doesn't support Active-X which means you don't have to buy a virus checking program.
    You can run Windows on a new Mac.
    Robert

  • I have the exclamation point symbol next to podcasts that don't meet the criteria for said symbol based on the FAQ

    When I'm looking through and trying to manage my Podcast library within iTunes, I see the exclamation point symbol next to several. My first issue is the fact that there are many that have this symbol that I only wanted a few episodes and not a subscription. How can I fix this problem?
    My second issue is that for many of the podcasts with the exclamation point symbol, they don't fit the criteria based on what's in the Symbol FAQ, which states that there are too many unplayed episodes so new episodes won't download. For the podcasts in question, this is not the case, as all episodes have been listened to. What can be done to fix this problem?
    My third issue is the fact that when I DO play a podcast on my iPod Touch (4th Gen), I don't use the app (can't stand it), then go to sync it with the computer, these episodes are shown as having already been played PRIOR to the actual syncing happening. So, when I go to do the ACTUAL sync, the play count is off. Right now, I have to manually reset the play count so that the episodes that I listened to on my iPod Touch only show one play in the library count, not two or in some cases, three. How can I fix this problem?
    I have the most current version of iTunes and use Windows 7 64-bit.
    Thanks for ANY help!

    Try this Support Article  >  http://support.apple.com/kb/HT1808

  • Im trying to run a pc scan, but it keeps saying that it wont open the page, please help.

    I need to run a pc scan for something but it keeps telling me that, the page can't open.

    What PC Scan? May you please provide a screenshot(s).
    * [[How do I create a screenshot of my problem?]]

Maybe you are looking for