SQL Command to select MAX(date) & Max(time)

My am having a really hard time getting a sql command to return data with the max(date) & max(time) combination. I think I need a sub query but can not figure it out. I have looked all over the internet but still don't understand it. Below is my command which returns the max date & max time but they are not from the same row of data. Please help.
SELECT "labor"."order-no", "labor"."oper-no", MAX("labor"."end-date") AS myDate, Max("labor"."end-time") AS myTime
FROM "E940LIVE"."PUB"."tm-log" "labor"
WHERE "labor"."order-no"='73153-bc' AND "labor"."company"='01'
GROUP BY "labor"."order-no", "labor"."oper-no"

Progress does not support the DATEADD function. Waht if I forget the number is time and look at it just as a number. Here is my data and what I have tried (again I don't understand the multiple select concept yet).
Data
oper-no   end-date    end-time
20      2/2/2010     41,975
30      2/3/2010     45,906
30      2/16/2010    32,941
40      2/4/2010     46,099
40      2/4/2010     50,227
40      2/4/2010     59,466
40      2/4/2010     62,024
40      2/16/2010    43,838
60      2/17/2010    32,679
90      2/25/2010    35,270
SQL Command
SELECT a."oper-no", a."end-time", a."end-date"
FROM   "E940LIVE"."PUB"."tm-log" a, (SELECT "end-time", max("end-date") AS max_date FROM "E940LIVE"."PUB"."tm-log" WHERE "order-no"='73153-bc' AND "company"='01' GROUP BY "end-date", "end-time") b
WHERE a."end-time" = b."end-time" AND a."end-date" = b.max_date AND a."order-no"='73153-bc' AND a."company"='01'
Result
oper-no   end-date     end-time
20      2/2/2010      41,975
30      2/3/2010      45,906
40      2/4/2010      50,227
40      2/4/2010      46,099
40      2/4/2010      59,466
40      2/4/2010      62,024
30      2/16/2010     32,941
40      2/16/2010     43,838
60      2/17/2010     32,679
90      2/25/2010     35,270
Desired Result
oper-no   end-date    end-time
20      2/2/2010     41,975
30      2/16/2010    32,941
40      2/16/2010    43,838
60      2/17/2010    32,679
90      2/25/2010    35,270
Thanks for any and all help!
Wayne

Similar Messages

Sql command not working with date time??

I am using my own sql query to fetch data in the sql command.
Due to the problem I found - here is the basic example:
The sql is:
select to_number(to_date('10/11/2011 10:23:00','dd/mm/yyyy hh24:mi:ss') - to_date('10/11/2011 10:20:00','dd/mm/yyyy hh24:mi:ss')) minu from dual
But I am not getting anything in Crystal Report tool!!
In any sql tool I get results.
When I am not using time part (hh24:mi:ss) :
select to_number(to_date('10/11/2011','dd/mm/yyyy') - to_date('09/11/2011','dd/mm/yyyy')) minu
from dual
I am getting data!!!!
What is the problem??
Initially I had it with parameters of type 'Date Time'
Please, any one knows what the problem is?

Hi,
Sorry for the delay and thanks for answering.
It was partial solution
Moving to oracle driver, not (OLE DB), this specific one worked fine:
select to_number(to_date('10/11/2011 10:23:00','dd/mm/yyyy hh24:mi:ss') - to_date('10/11/2011 10:20:00','dd/mm/yyyy hh24:mi:ss'))*100 minu from dual
BUT
When I tried to change one of the hardcoded values to be parameter of type 'Date Time' I couldn't pass the validation step - mostly the errors:
"ORA 00900 Invalid sql statment" and
"ORA - 00907: Missing right parnthesis"
No matter which format I used.
Last version is:
select to_date('{?tsStartReport}','yyyy-mm-dd hh24:mi:ss') from dual
Any idea why 'Date Time; is so problematic? How can I workaround it?

SQL query problem - select max (case... aggregate function)

Hi,
I have a problem with below sql query, it gives me problem/error message 'ORA-00937: not a single-group group function', why?
select sag.afdeling, sag.sagsnr, to_char(sag.start_dato, 'yyyy-mm-dd'), sag.stat, BOGF_TRANS.TRANSTYPE,
max (case when BOGF_TRANS.TRANSTYPE = 'K' then sum(bogf_trans.belobdkk) end) + -- as "TRANSTYPE K",
max (case when BOGF_TRANS.TRANSTYPE = 'D' then sum(bogf_trans.belobdkk) end) as "TRANSTYPE K & D",
max (case when BOGF_TRANS.TRANSTYPE = 'S' then sum(bogf_trans.belobdkk) end) as "SUM TRANSTYPE S"
from sag
join bogf_trans on sag.selskab = bogf_trans.selskab and sag.sagsnr = bogf_trans.sagsnr and sag.afdeling = bogf_trans.afdeling
where SAG.SELSKAB=37 and SAG.AFDELING = 'SUS' AND SAG.SAGSNR = 10876
group by sag.afdeling, sag.sagsnr, sag.start_dato, sag.stat, BOGF_TRANS.TRANSTYPE
If I exclude (columns) as below it give me correct summations (max (case... sum(...)) but then I miss some important info that I need
select
max (case when BOGF_TRANS.TRANSTYPE = 'K' then sum(bogf_trans.belobdkk) end) + -- as "TRANSTYPE K",
max (case when BOGF_TRANS.TRANSTYPE = 'D' then sum(bogf_trans.belobdkk) end) as "TRANSTYPE K & D",
max (case when BOGF_TRANS.TRANSTYPE = 'S' then sum(bogf_trans.belobdkk) end) as "SUM TRANSTYPE S"
from sag
join bogf_trans on sag.selskab = bogf_trans.selskab and sag.sagsnr = bogf_trans.sagsnr and sag.afdeling = bogf_trans.afdeling
where SAG.SELSKAB=37 and SAG.AFDELING = 'SUS' AND SAG.SAGSNR = 10876
group by sag.afdeling, sag.sagsnr, sag.start_dato, sag.stat, BOGF_TRANS.TRANSTYPE
Any ideas?

Moved to more sutable forum, sorry.

SQL command to select first record

I would like to create an SQL command to link two tables on a field so that only the first matching record is selected. What would be the syntax for that? Thank you.

Actually, that's not as simple as it sounds... It also depends on your definition of "first", and what data you are looking for.
For example, if you are looking for the earliest order date for each of your customers, you could do something like:
select customer.code, customer.name, min(order.date) as First_Order_Date
from customer, order
where customer.code = order.cust_code
group by customer.code, customer.name
But if you also want the sales dollars for that first order, you'd have to do something like:
select customer.*, firstOrder.first_order_date, sales.sales
from customer
join (
select cust_code, min(date) as first_order_date
from order
group by cust_code
) firstOrder
on customer.code = firstOrder.cust_code
join (
select cust_code, date, sum(sales) as sales
from order_detail
group by cust_code, date
) sales
on firstOrder.cust_code = sales.cust_code and firstOrder.First_Order_Date = sales.date
HTH,
Carl

SQL Where clause when comparing dates and times in ASP

Hello,
I am trying to pull data from my database which is dependant on both the date and time in HH24 format. So, my where clause looks something like this:
select * from thisTable where activity_time >= myCurrentDate
(myCurrentDate is a variable that is built which gives it the following format DD-MON-YYYY HH24:MI:SS)
So, the actual passed string to my call is:
select * from thisTable where ACTIVITY_TIME >= '02-DEC-2008 18:22:00' order by ACTIVITY_TIME asc
However, when calling this, I get the famous "ORA-01830: date format picture ends before converting entire input string"
Can anyone please help me?!?!?!?
Thanks in advance

Enrique answered your immediate question, but I'd like to point up a broader issue, and that is that you should <b><u>always</u></b> use the TO_DATE and TO_CHAR functions at the sql statement level when working with date datatypes. That way you are never dependent on some default over which you have no control. I call that is 'defensive coding'.

Selection Screen - Date and Time

Hi,
I have given a selection screen where the user needs to key in the input in the following format
dd.mm.yyyy hh:mm:ss.
Reason is that the database fetching these elements accepts only in this criteria.
Now as they look into automating this program, they would want to automatically take the current system date and time - 24 hours .
How do I achieve this in the above format? If this is not possible, let me know if i can make the selection screen with normal sap date format and convert it to the above format on passing to the select statement.
Regards
Sam

Hi Sam,
See this. Is this your requirement.
With this we are able to get Current time-stamp to selection parameter.
REPORT ZTEST.
DATA: L_TS TYPE TZNTSTMPS,
       L_TS_C TYPE CHAR14.
PARAMETERS:
P_TMSTMP TYPE TMSTMP OBLIGATORY MEMORY ID TEST.
INITIALIZATION.
   GET TIME STAMP FIELD L_TS.
   MOVE L_TS TO L_TS_C.
   SET PARAMETER ID 'TEST' FIELD L_TS_C.
The output is
Jogeswara Rao K

What is the sql command for SELECT with OR condition

Hi
What is the correct sql command for doing select with or condition??
SELECT * from TempData
WHERE port = '123'
OR serialnumber = '555'
So if there is a port = 123 or if there is a serialnumber = 555, I will get a successful select.
Thanks for helping a newbie!!

Hi
What is the correct sql command for doing select with
or condition??
SELECT * from TempData
WHERE port = '123'
OR serialnumber = '555'
So if there is a port = 123 or if there is a
serialnumber = 555, I will get a successful select.
Thanks for helping a newbie!!Make sure you bracket your OR conditions
eg
SELECT * from TempData
WHERE column = 'VALUE'
and port = '123'
OR serialnumber = '555'
is read as
SELECT * from TempData
WHERE (column = 'VALUE'
and port = '123' )
OR serialnumber = '555'
which is not the same as
SELECT * from TempData
WHERE column = 'VALUE'
and ( port = '123'
OR serialnumber = '555' )

Select key date of time-dependent hierarchy before select a hierarchy node

Hello experts!
I have a Web Application which has a selection on 0ORGUNIT (organizational unit). The selection is on hierarchy nodes and the hierarchy is time-dependent.
Because of the time-dependency I have to give a key date for the hierarchy. But I want to select the key date at runtime/execution of the query and additionally I want to select the hierarchy node and other selection criterias.
Maybe there is a solution to get all this in one pop-up or maybe in two or another solution how I can implement this requirement.
Thanks for help!
Peter

Hey!
You don't have to use the same presentation-hierarchy like the selection-hierarchy is which you use for the variable. While presentation-hierarchy always has a key-date, the selection-hierarchy has none. So you see all values for selection but just this which are valid for the presentation-hierarchy are selected. And there is a warning which you can supress over RSRT.
This solution works for our problem, maybe not for yours, don't know.
Best regards,
Peter

Sql*loader to select distinct data

Hi,
i am getting the following data from a csv file.
For repeated values of phone and dept, i am getting duplicate records of empno, empname and sal
I need to load the distinct record of empno,ename into a emp table
and then move the data salary and phone numbers into different table.
Is it possible to do at sql*loader level
>
EMPNO EMPNAME SAL PHONE DETP
1 TOM     2000      99999 20
1 TOM 2000      22222
2 BEN 3000     33333 30
2 BEN     3000      40
>
thanks
sunil

sunil_dba wrote:
Hi,
thanks
sunilSo what's stopping you then to create primary key on empno column ?

Designing View to select Date with Time

Hi,
How can we design the view to select the date along with time?
We know that we can provide drop downs for hours, minutes and seconds.
Is there any alternative to display UI element to select the date and time. I am in 7.0 SP17
Thanks

Hi Tatayya Marni,
For selecting the Date and Time u can try a workaround. First create a simple type of type date and bind it to an Input Field so that the date can be captured and for the for the time u can use the System Date and using the same SystemDate u can get the Time in Hours, Minutes and Seconds.
Eg :- store the SystemDate in a Date variable and to get the hour u can use Date.getHours(), getMinutes
Date dt = new Date(System.currentTimeMillis());
dt.getHours(),dt.getMinutes(),dt.getSeconds());
Hope this works dor u.
Regards,
Poojith M V

Passing Parameter from Main report to SQL command-based subreport

I am trying to cut down the run time of my reports and have recently figured out how to write SQL commands to limit the data by filtering prior to being pulled into the reports. However, many of my reports rely on multiple sub reports, which can cause a dramatic 'drag' on the report.
I am trying to filter the SQL command used in my sub report by passing the group parameter, which is selected by the user in the main report, to the sub report's SQL command. Without this parameter, the sub report has to sort through a lot more data than it would with this parameter, making the run time extremely slow.
Any suggestions on how I can accomplish this?
Thanks for any help you can provide,
Marlene Allen
Crystal Reports Developer
Crystal Reports Professional;
Product Type: Full;
Product Version 11.5

Hi Marlene,
I don't believe you can pass a CR parameter to a Command object.
I suggest replacing all of the Command Objects with a Stored Procedure so all of the data filtering is done server side. DB servers are much more proficient at collecting the data and filtering than CR will ever be. It will also allow you to replace subreports to also speed up your report processing. All depends on your layout of course but something to look at.
Thank you
Don

Dynamic SQL Command Queries Using Parameters

Post Author: tdoman
CA Forum: Data Connectivity and SQL
I'm using Crystal Reports 11 and am trying to dynamically build part of the "Where" clause in the SQL command query to filter data on the server before the results are sent to the client. I'm doing this to decrease the load time of my reports by not having to send a large set of data to the client, then filter the results on the client side.
I want to create a parameter list that is dynamically generated from a table in a database and allows you to select mutiple values from that list. For example: I have two tables. One employee table and one employee type table. The employee table lists all employees and their related employee types (full-time, part-time, and contractor). The employee type table lists the employee types that will dynamically be loaded into the parameters list.
Employee Table
ID    Name       TypeID
1     Bob          2
2     Steve        1
3     John         3
4     Bill            1
Employee Type Table
ID   Type
1     Full-Time
2     Part-Time
3     Contractor
Assuming the user selects u2018Full-Timeu2019 and u2018Contractoru2019 from the parameter list, the SQL command query I want to generate is as follows:
SELECT *
FROM emp, emp_type
WHERE emp.ID = emp_type.ID and emp.TypeID in (u20181u2019, u20183u2019)
I tried building the following SQL command query so it would dynamically replace {?EmpType} with the IDu2019s of the types the user selected but it doesnu2019t work. Any ideas how to fix this?
SELECT *
FROM emp, emp_type
WHERE emp.ID = emp_type.ID and emp.TypeID in ({?EmpType})

Post Author: tdoman
CA Forum: Data Connectivity and SQL
btw...I just realized I had a typo in my "where" clause of the previous example. It should have been like so:WHERE emp.TypeID = emp_type.ID and emp.TypeID in (u20181u2019, u20183u2019) satish_nair31:
Instead of passing the filter condition as parameter it would be fine if you pass it by ReportViewer.SelectionFormula Property.
The selection formula property of report viewer control will dynamically append the where condition with the SQL value. You will pass the filter condition as per the syntax of language supported by crystal reports.I believe using the ReportViewer.SelectionFormula property you are referring to is only available if I'm loading the report through a VB application. If this is true, then this option will not work for me because I'm loading the report in a browser from the Crystal Report web server and currently don't have a VB application that can load the report. If I did, then I could dynamically build the SQL string using VB then pass it to the Crystal Report on the fly.But I'm trying to figure out if it's possible to do it without loading the report using VB. Please correct me if I'm wrong on these assumptions.

Manipulating imports or photos events dates and times

It's a simple question and obviously related to the subject, but I'm trying to find out if it is possible to manipulate imports of images from an I device, we have an Apple Mac that has images on spreading over 3years, obviously with the event dates and times logged, but between each of the photos there are thousands of other images, therefore I would like to know if it is possible to slip images into iPhoto between these thousands of images and alter the date and time of the import or image
plus is there any way I can bring import logs up within iPhoto?

iPhoto has two ways to change the date of photos.
From the Photos menu select "Adjust Date and time". That will let you shift the dates of all selected photos by a fixed amount.
Or use "Photos > Batch Change". This way you can set the date of photos to a fixed date and time, with a optional increment between the photos. This is very useful for scans, where no capture date has been recorded.
To change the dates of events, change the date of the photos inside, or split the events, if you want to insert a different event in between. You can split an event by sorting the photos according to date and selecting a photo in the event. Then use the command "Events > Split event".

Mixing SQL Command parameters and UI created parameters

Post Author: shecter
CA Forum: Data Connectivity and SQL
I'm using Crystal Reports XI. I've created a report with an SQL Command - no other tables or views. I want to allow my users to be able to choose data from a dynamic parameter and have the SQL read that and spit out the results. I was able to add a parameter to the SQL using the Parameter column in the Command window. This allows my user to type in a parameter. However, when I run the report after creating a parameter using the UI (i.e. Field Explorer/Parameters/right clicking and selecting "new" and then adding the parameter to a field using the selection wizard), i first get a screen that shows me the parameter that I created in the SQL Command window, then I get a screen that shows me the UI created parameters. How can I make it show only one screen with all the parameters? -Marc

Post Author: jenxia
CA Forum: General
SQL Command is :
SELECT UNIQUE ContactID, incomingAddress,applicationid,
MediaStatus, MediaDirection, EndDateTime, StartDateTime
FROM MMCAContactMediaViewwhere EndDateTime>= {?1-reportstarttime} and EndDateTime <= {?2-reportendtime}
Order by ContactID
Select formula using dynamic prompts as
{Command.contactid} = {?ContactID} and{Command.applicationid} = {?ApplicationID} and{Command.incomingaddress} = {?IncomingAddress}

Error while executing a sql query for select

HI All,
ORA-01652: unable to extend temp segment by 128 in tablespace PSTEMP i'm getting this error while i'm executing the sql query for selecting the data.

I am having 44GB of temp space, while executing the below query my temp space is getting full, Expert please let us know how the issue can be resolved..
1. I dont want to increase the temp space
2. I need to tune the query, please provide your recomendations.
insert /*+APPEND*/ into CST_DSA.HIERARCHY_MISMATCHES
(REPORT_NUM,REPORT_TYPE,REPORT_DESC,GAP,CARRIED_ITEMS,CARRIED_ITEM_TYPE,NO_OF_ROUTE_OF_CARRIED_ITEM,CARRIED_ITEM_ROUTE_NO,CARRIER_ITEMS,CARRIER_ITEM_TYPE,CARRIED_ITEM_PROTECTION_TYPE,SOURCE_SYSTEM)
select
REPORTNUMBER,REPORTTYPE,REPORTDESCRIPTION ,NULL,
carried_items,carried_item_type,no_of_route_of_carried_item,carried_item_route_no,carrier_items,
carrier_item_type,carried_item_protection_type,'PACS'
from
(select distinct
c.REPORTNUMBER,c.REPORTTYPE,c.REPORTDESCRIPTION ,NULL,
a.carried_items,a.carried_item_type,a.no_of_route_of_carried_item,a.carried_item_route_no,a.carrier_items,
a.carrier_item_type,a.carried_item_protection_type,'PACS'
from CST_ASIR.HIERARCHY_asir a,CST_DSA.M_PB_CIRCUIT_ROUTING b ,CST_DSA.REPORT_METADATA c
where a.carrier_item_type in('Connection') and a.carried_item_type in('Service')
AND a.carrier_items=b.mux
and c.REPORTNUMBER=(case
when a.carrier_item_type in ('ServicePackage','Service','Connection') then 10
else 20
end)
and a.carrier_items not in (select carried_items from CST_ASIR.HIERARCHY_asir where carried_item_type in('Connection') ))A
where not exists
(select *
from CST_DSA.HIERARCHY_MISMATCHES B where
A.REPORTNUMBER=B.REPORT_NUM and
A.REPORTTYPE=B.REPORT_TYPE and
A.REPORTDESCRIPTION=B.REPORT_DESC and
A.CARRIED_ITEMS=B.CARRIED_ITEMS and
A.CARRIED_ITEM_TYPE=B.CARRIED_ITEM_TYPE and
A.NO_OF_ROUTE_OF_CARRIED_ITEM=B.NO_OF_ROUTE_OF_CARRIED_ITEM and
A.CARRIED_ITEM_ROUTE_NO=B.CARRIED_ITEM_ROUTE_NO and
A.CARRIER_ITEMS=B.CARRIER_ITEMS and
A.CARRIER_ITEM_TYPE=B.CARRIER_ITEM_TYPE and
A.CARRIED_ITEM_PROTECTION_TYPE=B.CARRIED_ITEM_PROTECTION_TYPE
AND B.SOURCE_SYSTEM='PACS'
Explain Plan
==========
Plan
INSERT STATEMENT ALL_ROWSCost: 129 Bytes: 1,103 Cardinality: 1
     20 LOAD AS SELECT CST_DSA.HIERARCHY_MISMATCHES
          19 PX COORDINATOR
               18 PX SEND QC (RANDOM) PARALLEL_TO_SERIAL SYS.:TQ10002 :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
                    17 NESTED LOOPS PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
                         15 HASH JOIN RIGHT ANTI NA PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,098 Cardinality: 1
                              4 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 63 Bytes: 359,283 Cardinality: 15,621
                                   3 PX SEND BROADCAST PARALLEL_TO_PARALLEL SYS.:TQ10001 :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
                                        2 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
                                             1 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
                              14 NESTED LOOPS ANTI PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 40,256,600 Cardinality: 37,448
                                   11 HASH JOIN PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 6,366,160 Cardinality: 37,448
                                        8 BUFFER SORT PARALLEL_COMBINED_WITH_CHILD :Q1002
                                             7 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 1 Bytes: 214 Cardinality: 2
                                                  6 PX SEND BROADCAST PARALLEL_FROM_SERIAL SYS.:TQ10000 Cost: 1 Bytes: 214 Cardinality: 2
                                                       5 INDEX FULL SCAN INDEX CST_DSA.IDX$$_06EF0005 Cost: 1 Bytes: 214 Cardinality: 2
                                        10 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
                                             9 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
                                   13 TABLE ACCESS BY INDEX ROWID TABLE PARALLEL_COMBINED_WITH_PARENT CST_DSA.HIERARCHY_MISMATCHES :Q1002Cost: 0 Bytes: 905 Cardinality: 1
                                        12 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT SYS.HIERARCHY_MISMATCHES_IDX3 :Q1002Cost: 0 Cardinality: 1
                         16 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT CST_DSA.IDX$$_06EF0001 :Q1002Cost: 1 Bytes: 5 Cardinality: 1

SQL Command to select MAX(date) & Max(time)

Similar Messages

Maybe you are looking for