SQL Data Sync - error during sync. Unable to diagnose the problem.

I have 2 SQL data sync groups setup
First one does a 1 way sync from azure to local db. Sync's only 1 table.
Second one does a 1 way sync from local db to the azure. Syncs 2 tables.
After setting it up and getting a few sync errors I was able to figure out what's wrong by checking the logs and fixing the problems. It was all running fine for a while and now it broke down.
I got a sync error every time sync is attempted - however this time I'm not able to fix anything because I don't have any visibility on what's wrong - when I click on the Log tab in the Azure Management portal it just stays blank - no details come up.
I click [Logs] Wait spinner comes up
And then it looks like this:
Another detail worth mentioning is that the error only occurs for the Second sync group that I have.
Here's what I've attempted so far
I poked around the azure management portal to try to find another way of looking at the logs - looking for something like ftp access to the log file - couldn't find anything like that.
I refreshed schema in the sync rules tab.
Used the SQL Data Sync agent tool on the premise to do the ping operation. Restarted the sql data sync windows service.
Made sure I have the latest SQL Data Sync Agent installed.
I'm wondering what are my options from here...
I'm close to trying to deleting and recreating the sync group... I'm not too comfortable doing this because I know there are some sql tables that get created in the local db to support the operation of the sync - so if I delete the sync group would that automatically
drop those helper tables as well or would I have to drop those manually - If I do drop those then that will obviously brake the other sync group that works fin as well..
Any advice is appreciated. Thanks

hi,
According to your description, it seems the issue is related to SQL Azure, I will move this thread to SQL Azure Discussions forums to get a better support.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Error during sync : Mobile Service

I am getting the following error during sync
Data processing at the server is still in progress. Try again.
Any ideas as to what could be wrong?

Hi,
I guess nothing is really wrong. It seems as if the server is till processing data for your device. If you sync meanwhile, the server wnats to tell you that it is currently working to prepare data fro you, if you resync in a while, you should get your complete data.
Cheers, Stefan

ORA-29400: data cartridge error/IMG-00703: unable to read image data error

Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
ORA-29400: data cartridge error
IMG-00703: unable to read image data
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 75
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 65
ORA-06512: at "ORDSYS.ORDIMG_PKG", line 37
ORA-06512: at "ORDSYS.ORDIMAGE", line 927
is raised when the following trigger is processing certain JPGs (example). Other JPGs are handled as expected:
create or replace trigger photo_size_trg
before insert or update on photos
for each row
declare
photo_width integer;
begin
-- Check to see if the new photograph is different from the old one...      --
if dbms_lob.compare(:old.photo, :new.photo) != 0
then
    -- ...if so, check to see if it's wider than the desired 250 pixel        --
    -- maximum...                                                             --
    photo_width := to_number(ordImage.getMetadata(:new.photo)(1).extract('/ordImageAttributes/width/text()').getStringVal());
    if photo_width > 250
    then
      -- ...and if so, apply an image transform that will resize to the photo --
      -- to a maximum of 250 pixels wide, keeping the original aspect ratio. --
      -- There doesn't seem to be an elegant way of specifying a constraint   --
      -- in one dimension like this, so the height is specifed as a large     --
      -- enough value to cover all practical contingencies.                   --
      ordImage.process(:new.photo, 'maxScale=250 10000');
    end if;
end if;
end;Any thoughts/suggestions?

hi,
I am getting following error,kindly help me out to rectify this ..
thank you
ORA-29400: data cartridge error
ORA-00600: internal error code, arguments: [kokbCollTerminate], [13], [], [], [], [], [], []

I want to copy myt data to my iPhone via itools the error occured is unable to ascertain the compatibility of itunes my itools and itunes both are updated. please help

i want to copy my data to my iPhone via itools
the error occured is
unable to ascertain the compatibility of itunes
my itools and itunes both are updated.
please help

The following fix apparently worked for some: https://www.youtube.com/watch?v=yEgm8m__Ipg

My ipad iOS 8.1.1 to mac mini 10.7.5 sync freezes during 'syncing mail accounts'. anyone have an idea to help?

my ipad iOS 8.1.1 to mac mini 10.7.5 sync freezes during 'syncing mail accounts'. anyone have an idea to help? every time i sync, using the cable, the process stops and freezes on 'syncing mail accounts'. i end up disconnecting the sync as i need to move on. this has been going on for a week now. anyone else, please? thanks very much, beth

I just emailed the one note to myself and solved the issue.

Unable to connect to the selected mobile data service, please try again later. If the problem persists please contact your administrator

Since last week or 2 weeks ago, some of our users (both Batam and Singapore) here encountered a problem where they are not able to browse the Internet on their BB as they used to.
Example :
I did a test to browse on their BB
www.cnn.com
they will see below error:
“Unable to connect to the selected mobile data service, please try again later.
If the problem persists please contact your administrator “
However if we use ‘Google’ or ‘Yahoo’ search on the BB and entered ‘CNN’ and run a search on it.
We are able to open the CNN website – from the link result search by Yahoo or Google
It’s also applicable to other websites too.
Any idea?

Hi thatemailguy,
Are the users on a BlackBerry Enterprise Server?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

Is this on a Windows XP, Vista or 7 system?

Unable to open Power BI Sites - Error: We were unable to load the Site. Refresh the page to try again

Power BI Sites Error
We were unable to load the Site. Refresh the page to try again
When opening Power BI Sites with internet explorer, in certain security configurations you may run into the above error. While we are looking into resolving this, please see the following workaround:
From the Tools menu, select internet options.
On the security tab uncheck the "Enable Protected Mode" checkbox form the relevant Zone (Intranet/Internet)
Remove all entries to *.powerbi.com from trusted sites or/and local intranet sites
On the advanced tab, uncheck the "Enable enhanced protected mode" (if you made a change here it will require a restart of the machine)
Restart and try again (if not changes done in the last step, just restart the browser)

Hi
Any further debugging tips? I upgraded from IE9 to IE11 on my Win7 machine to try get Q&A working, it broke the entire PowerBI site for me

Error during movie encoding - tried all the common things, any suggestions?

HI, Attempting to burn a DVD from iDVD 7.11
I'm getting the "Encoding Error: There was an error during movie encoding" dialogue at the end of an attempted burn. Tried several times and many of the suggestions already on the forum
I have "shared" the movie from iMovie. When it first opens iDVD I have to change the default setting of "best Performance" to "Professional Quality" and the video mode to PAL (I'm in Australia). I change it both in the preferences pane (a change which seems to be ignored when I restart the program) and in the project info.
- I'm trying just to make a disc image, but haven't got past this first step to getting it to DVD...
- There is only the movie in my project (I've not added audio or pics in iDVD)
- I've used the "Modern" theme and deleted the default drop zones and menu audio,
- I've checked the chapter markers are not at the start of the movie or near any transitions,
- There are no special characters in the titles,
- All titles and menus are within the TV safe zone,
- I've deleted the com.apple.iMovie.plst files and emptied trash,
- I've tried deleting encoded assets,
- Repaired permissions, restarted the computer, checked for updated software,
- (tried a "safe boot" as someone suggested somewhere, but the program couldn't find the movie or audio files),
- I have 660GB free on the main hard drive,
- I've disconnected external drives,
- no error appear in map view,
- I preview the project and all appears fine,
The original footage was filmed for me. I was given a DVD which I ripped into an MP4, import into iMovie, edited the audio, added AIFF audio, added a jpeg image and 2 transitions. (Unfortunately the audio on the original I was given is unusable, else I could just copy the DVD I was given.)
So if anyone has further suggestions as to what might resolve this issue, please let me know!

Thanks for your post F, much appreciated
The project is 123 minutes, 4.16GB and it's being broadcast on TV, so I need max quality I can get (without spending money!)
I think I have sort of solved the problem - addressing what you've identified in a slightly different way.
Since my previous post, I noticed that clicking on the "Media" tab in the side pane, and selecting "Movies", my project was listed, but when I clicked on it, rather than the thumbnail I get on other movies I've processed, I got this text:
"This iMovie project can't be used because it hasn't been prepared for sharing yet. To prepare it for sharing, open it in iMovie and choose Share > Media Browser.... "
I did that (7 hours processing) then successfully created the disc image (2 hours processing). I have now burnt the DVD using disc utility (1 hour processing). It plays OK on the computer, but I'll need to check it on a normal player before marking this as thread solved (I don't have one here at home).
Unfortunately somewhere in all this processing the video has significantly lost quality. I thought I'd used all the highest quality setting, but will have to go back and check each step again. Unless someone reading this post has noticed anything I've done so far that would compromise video quality. The audio is fine - which for this project is the most important aspect.
So in regard to my initial problem; it seems there is a problem in iDVD not recognising/remembering the set preferences when using the "Share > iDVD " function in iMovie.
To summarise my solution for anyone else who experiences the same issue,
When sending a project from iMovie using "Share > iDVD " it seems you must also choose "Share > Media Browser.... "
This may be specific only to the case where PAL is required.
PS
I should also note, incase it made any difference, that I found the default headings in the chapter menus had dashes in them (i.e. it defaults to "Scenes 1 - 6", so I changed to "Scenes 1 to 6"). The only other modification I made since my original post was using stills instead of moving thumbnails for the chapter selection.

We got error "System is unable to interpret the SSO ticket received"

We got error "System is unable to interpret the SSO ticket received" on Backend system(R/3 4.7).
We use SAP Enterprise Portal 6.0 SP15.
Please let us know what is problems ?
We done following steps in SAP EP.
1. Created LOGON-METHOD (Logon Method : SAPLOGONTICKET).
2. Export Public-key (verify.der) from SAP EP.
   (System Admin -> System config -> Keystore Administration -> Download)
We done following steps in SAP R/3.
3. Start STRUSTSSO2 Transaction.
   In the PSE status frame on the left, choose the system PSE.
   In the certificate section, choose Import Certificate.
     The Import Certificate screen appears.
   Choose the File tab.
   In the File path field, enter the path of the portal's verify.der file.
   Set the file format to DER coded and confirm.
   In the Trust Manager, choose Add to PSE.
   Choose Add to ACL, to add the Portal Server to the ACL list.
   In the dialog box that appears, enter follows:
     system ID    :J2E
     client       :000
     Subject name :CN=J2E
     Issuer name :CN=J2E
     Serial number:00
   Save your entry.
4. Set profile parameters
   login/accept_sso2_ticket = 1
   login/create_sso2_ticket = 0
5. Restart SAP R/3 system.

Hi,
I faced the same problem when i am configuring the SSO,
check the portal client number in System Administration>System Configaration->UM Configuration--->Direct Editing
and give the same client number
In the dialog box that appears,
system ID :J2E
client :000
else check weather u r importing the certificate correctly.
First export the verify.der and and import that using the STRUSTSSO2
Thanks
Ajay

Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
Sequence of events:
The main error message is always:
An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
Yesterday, I opened Disk Utility and verified the disk. Got this error:
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
Starting manual backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Found 145601 files (11.88 GB) needing backup
16.1 GB required (including padding), 620.77 GB available
Copied Zero KB of 11.88 GB, 0 of 145601 items
Copied 0 files (Zero KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
Ejected Time Machine network volume.
Starting automatic backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
Does anyone know what the problem is here and what I should do?
Thanks,
Tery

You have repaired your boot drive (which is good) but have you repaired your time machine drive? I don't own a Time Capsule so I don't know if disk utility can operate on it. If it can, you should repair it as well. You may need to erase it and start a new backup. That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

I have downloaded firefox. while running the software i have got an error as "software corrupt".what is the problem i am facing?

i have downloaded firefox. while running the software i have got an error as "software corrupt".what is the problem i am facing?

-> Uninstall your current Firefox
* https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
* DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
* Restart your system
-> Download latest Firefox version from one of these links using some other Web Browser:
* http://www.mozilla.com/en-US/firefox/new/
* http://www.mozilla.com/en-US/firefox/central/
* http://www.mozilla.com/en-US/firefox/fx/
* http://www.mozilla.com/en-US/firefox/all.html
-> Install Firefox using the downloaded & saved Firefox installer file
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
Check and tell if its working.

Error in downloading. Where's the problem?

I just joined Creative cloud, installed trial version of InDesign, tried to install Bridge, Photoshop and then Illustrator. With all of them i get this same info : Error in downloading. Where's the problem??

I was trying to download trial versions, with this creative cloud window popping each time after one trial downloading (Indesign-downloading went just fine, after it all I'm getting is this 'latausvirhe' notification = 'error in downloading').
Sorry - my mac speaks Finnish. No notes or codes, just this window and i don't know how to proceed.

When I try to authorize home sharing in iTunes, I get error message 5506. What is the problem?

When I try to authorize home sharing in iTunes, I get error message 5506.
What is the problem?

Home Sharing
Setting up Home Sharing on your Computer
http://support.apple.com/kb/HT4620?viewlocale=en_US&locale=en_US
Understanding > http://support.apple.com/kb/HT3819
How to > http://support.apple.com/kb/HT2688
Troubleshooting > http://support.apple.com/kb/TS2972

Time Machine Error: "An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this?

I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this?

SQL Data Sync - error during sync. Unable to diagnose the problem.

Similar Messages

Maybe you are looking for