ORA-29400: data cartridge error/IMG-00703: unable to read image data error

Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
ORA-29400: data cartridge error
IMG-00703: unable to read image data
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 75
ORA-06512: at "ORDSYS.ORDIMERRORCODES", line 65
ORA-06512: at "ORDSYS.ORDIMG_PKG", line 37
ORA-06512: at "ORDSYS.ORDIMAGE", line 927
is raised when the following trigger is processing certain JPGs (example). Other JPGs are handled as expected:
create or replace trigger photo_size_trg
before insert or update on photos
for each row
declare
  photo_width integer;
begin
  -- Check to see if the new photograph is different from the old one...      --
  if dbms_lob.compare(:old.photo, :new.photo) != 0
  then
    -- ...if so, check to see if it's wider than the desired 250 pixel        --
    -- maximum...                                                             --
    photo_width := to_number(ordImage.getMetadata(:new.photo)(1).extract('/ordImageAttributes/width/text()').getStringVal());
    if photo_width > 250
    then
      -- ...and if so, apply an image transform that will resize to the photo --
      -- to a maximum of 250 pixels wide, keeping the original aspect ratio.  --
      -- There doesn't seem to be an elegant way of specifying a constraint   --
      -- in one dimension like this, so the height is specifed as a large     --
      -- enough value to cover all practical contingencies.                   --
      ordImage.process(:new.photo, 'maxScale=250 10000');
    end if;
  end if;
end;Any thoughts/suggestions?

hi,
I am getting following error,kindly help me out to rectify this ..
thank you
ORA-29400: data cartridge error
ORA-00600: internal error code, arguments: [kokbCollTerminate], [13], [], [], [], [], [], []

Similar Messages

  • Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it fr

    Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.

    UPDATE: The true error is : '
    "itunes was unable to load data class information from sync services"
    Any of the topics didnt work.
    Sync on my wife's laptop works.

  • One way sync from Outlook Express gets Unable to read application data error

    I have a BB Flip, 8220, and am trying to use Outlook Express as my Contacts organizer.  I have started Outlook express "vanilla" and only have one records in Outlook Express.  I have 34 records in my BB Contacts.  When I run synchronize (and again, I am trying to do this one way, from Express to BB) I get the error "Unable to read application data", "Processing Device Address Book", "Record 34 of 34 Records".
    I have read many of the threads.  I have checked the RIM.log file and it says one way sync.  Any clues on how to fix this?  I am on Desktop 4.6, do I need to upgrade to 4.7?
    Please advise.
    Thank you.
    Solved!
    Go to Solution.

    Well I fixed the problem.  What I did was run a Backup using the desktop mgr software, I then ran a restore, but I used the Advanced option so that I could open the ipd backup file and then select just the contacts database and push that from my computer to the device (using the right arrow copy button in the middle of the Advanced window thingy).  I then reran the Sync and it WORKED!
    Doing the backup and restore must have fixed the corrupted record on my phone.  Wonderful.  I was nervous, but it worked jst fine.

  • PI 7.3 - AEX "unable to read configuration data" and login problems

    Hello Friends,
    after installation of AEX, i'm facing some problems.
    1.I'm not able to login with any user, i created during installation wizard. So i cannot check any user in NWA -> User Administration.
    2.Once more, while opening http://<host>:<port>/rep or http://<host>:<port>/dir, i get the following error message.
    Can somebody help me?
    I think, there is a problem with the users, which have been created during installation. How can i check this? Is there any chance?
    Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
    PI (http://<host>:<port>/dir/start/index.jsp). Below is the part of the error message that is showing up. Appreciate your suggestions:
    Exception class: com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed
    Message
    Unable to read configuration data (ExchangeProfile/aii.properties)
    Stacktrace
    Thrown:
    com.sap.aii.utilxi.prop.api.PropertiesException$InitFailed: Unable to read configuration data (ExchangeProfile/aii.properties)
    at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:220)
    at com.sap.aii.utilxi.prop.api.AIIProperties.initServerMode(AIIProperties.java:518)
    at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:97)
    at com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:151)
    at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:43)
    at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
    at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
    at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
    Please let me know if I am not clear.
    Edited by: Clarence on Feb 6, 2012 3:28 PM
    Edited by: Clarence on Feb 6, 2012 3:28 PM

    hi,
    >>>>Second, if i'm able to login, i have to import the exchange profile again. This should solve the problem. Or is this wrong?
    if you have java stack only there is no exchange profile anymore...
    https://weblogs.sdn.sap.com/pub/wlg/28334
    Regards,
    Michal Krawczyk

  • Zen Xtra (Nomad) - Unable to read from device error (have tried everythi

    Recently, I've been having problems with my Creative Zen Xtra Nomad mp3 player. One day it started freezing and lagging massi'vely when I would enter nomad explorer. Now it's virtually impossible to drag and drop something from nomad explorer to my computer or vise versa (keep getting the unable to read from device error). However, sometimes I am able to get an mp3 or two after about 5 minutes of transfer time.
    I have no idea why it is doing this. One day I'm transferring my data back and forth with no problem, and the very next day I am getting this freezing, lagging, and errors when trying to transfer. The only thing that changed was me formatting my computer in between it working and it not working, but I did reinstall the driver and nomad explorer once I formatted (I'm also using the same USB 2.0 cable, but it worked fine the day before, so I am pretty sure that's not part of the problem). I was using the mp3 player to store about 0 GB worth of data for when I formatted, and now I'm unable to retrieve virtually any of it. I've tried everything under the PC Connectivity link short of formatting the mp3 hard dri've (and that is not an option because I need the files). I took it to a friends house to try on his computer, but it acted the same way. I'm completely stumped. Is there anything I haven't ruled out? Also, I'm running Windows XP Pro SP2, and I was using SP2 before the format as well if that has any relevance.
    Please let me know if I've left out any important information relevant to this issue. Any help would be very much appreciated.
    Thanks in advance.
    -Noah Patterson
    Edit: I'm having the exact problem as this guy, but I didn't seem to find any answers on his thread.
    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=6459&query.id=3264 5#M6459
    Message Edited by talzok on 09-20-2005 08:03 AMMessage Edited by talzok on 09-20-2005 08:09 AM

    Never use MP3 players to store important data, or as a single point of storage for any data (that includes keeping a backup of the player's audio tracks). You can have problems like this with accessing the data, as well as simply dropping the player and losing the lot.
    There are a couple of methods I've seen that have worked to retrieve data:
    . Driver update - either update to the latest drivers, or nonsensically downgrade to the drivers that come on the install CD.
    2. Notmad Explorer - use the Xtreamer function in Notmad Explorer's trial version (which is free) to access the data and download it. It will be tedious, because I assume you have to download one file at a time.
    As for your general problem, I would try using Creative's MediaSource instead of Nomad Explorer to access the player (people generally don't have good experiences with Nomad Explorer).
    Also make sure you download the latest versions of the drivers (taking above into account), MediaSource, and the MediaSource plugin from Nomadworld.com downloads.
    Once you have the data off (hopefully!) you might simply want to reformat it if none of the above hel
    ps.

  • Unable to read configuration data (ExchangeProfile/aii.properties)

    Pls  anybody can help me in solving this issue
    Unable to read configuration data (ExchangeProfile/aii.properties)

    look at this two threads
    Exchange Profile Error
    XI 3.0 Problem on Java startup
    Thanks

  • The finder can't complete the operation because some data in "VIDEO_TS.BUP "can't be read or written (error code-36)

    the finder can't complete the operation because some data in "VIDEO_TS.BUP "can't be read or written (error code-36)

    I faced the same problem and i fixed it by going to applications - utility - disk utility and fixing the errors.

  • While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings:   "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."

    While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings:   "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?

    This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.

  • Trying to copy iPhoto Library to external hard drive for backup.  Error message:  The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

    Trying to copy iPhoto Library to external hard drive for backup.  Error message:  The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

    That code is
    -36
    ioErr
    I/O error (bummers)
    Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk.  If that fails to help I'd try the following:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the external HD as the location of the newly rebild library.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • WebUtil error: WUC-6: Unable to read WebUtil configuration file

    Dear Colleague,
    I received the following error:
    WUC-6: Unable to read WebUtil configuration file
    c:\OraHome_BIForms\forms\server\webutil.cfg
    In the meantime, I have verified that my default.env file contains the following path definition:
    # webutil config file path
    WEBUTIL_CONFIG=C:\OraHome_BIForms\forms\server\webutil.cfg
    What is wrong here? Does "unable to read..." mean that the file security settings do not allow read access to the webutil.cfg file?
    I would appreciate any advice you can give me.
    Thank you and kind regards,
    Randy

    In the meantime, I have figured out the solution to my problem.
    The webutil.cfg file was not in the directory that was being pointed to in the path parameter.
    Regards,
    Randy

  • I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

    I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
    Attachments:
    try2.txt ‏2 KB
    read_array.vi ‏21 KB

    The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
    Here are some of your choices to fix your problem.
    1. Change the source file to a tab delimited file. Your VI will then run as is.
    2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
    3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
    Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
    Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

  • Feature Request: Functions to read image data, and write to tiff or jpeg.

    Functions that render image data and make it available to plugins before writing to disk would facilitate writing plugins that take rendered image data into consideration. Also, if the aforementioned image data could be subsequently written to disk possibly after a bit of modification, it would open up a whole new world for plugins.
    Plugins don't need to access the mid-rendering stages in the raw conversion / rendering pipeline, but having a shot at post-rendered, pre-written to disk image data would allow pixel manipulating export plugins to be written. A set of image file manipulation methods would be a decent work-around, providing the ability to read/write tiff/jpeg files.
    Rob

    Well, I'm replying to my own question!
    I solved the problem by reading the data from my card, then using Flatten Pixmap to create a pixmap from my data array, then using Draw Flattened Pixmap to create a picture to send to a 2D Picture.  This works fine.
    Now, how can I change the Pixmap into Image so I can save to an AVI?

  • Excel 2013 PowerPivot Error - "PowerPivot is unable to load the Data Model"

    I'm attempting to use the PowerPivot add-on in Excel.  When clicking 'Manage Data Model' or attempting to 'Load to data model,' I receive the error 'We couldn't load the Data Model.  This may be because the Data Model in this workbook is damaged.',
    followed by 'PowerPivot is unable to load the Data Model.'  This happens irrespective of data source type.  I have Excel 2013 32-bit, PowerPivot 32-bit, running on Windows 7 OS 64-bit.  I am not running an SSAS instance on my machine. 
    Any suggestions?

    Hi
    Have you ever tried to repair your office?
    Also we may refer to the following blog :
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/11/12/powerpivot-for-excel-2013-errors-after-october-update-kb-2825655.aspx
    This issue seems to be caused by the October 2013 update (KB 2825655) for Excel 2013. Try to remove it or restore the system to an earlier point and check the result.
    Regards
    Tylor Wang
    TechNet Community Support

  • FCP error message: Unable to read the data on your source tape!

    Hey,
    So I have been editing on the MacPro now for over a year and I have never seen this message before...the message reads:
    _*"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape."*_
    Has anyone got this message and could help me out please? I need to edit these tapes A.S.A.P.
    Thank You,
    Erick

    why would it start a month later giving me problems instead of when it was updated?
    That is a good point. Anything change since the time it worked to when it didn't? How about trying another firewire cable. Those can go south without notice, might cause this.
    Shane

  • Error importing Idoc - Unable to read segments

    Hi experts,
    I have some problems importing a custom built IDoc in IR.
    The error I got was:
    ZPATINFO_IDTY.ZPATINFO: Error
    +Error: IDoc type ZPATINFO contains error (unable to read segments)
    Import failed with 1 error.
    I've tried to import standard IDocs and they were successful.
    I tried to import the metadata in IDX2, and was successful. A popup saying "unable to read segment versions" but i could still see the structure in IDX2.
    I've added roles to my user:
    SAP_BC_MID_ALE_DEVELOPER
    SAP_BC_MID_ALE_IDOC_ADMIN
    SAP_BC_MID_ALE_IDOC_DEVELOPER
    Please help.
    Thanks!
    Ron

    First of all check if you have the proper authorizations;
    From Note: 837595
    Authorization object S_RFC
    Field name RFC_TYPE value FUGR
    Field name RFC_NAME value EDIMEXT, SDTX
    Field name ACTVT    value 16
    Authorization object S_IDOCDEFT
    Field name ACTVT   value 03
    Field name EDI_CIM value ' '
    Field name EDI_DOC value TXTRAW01
    Field name EDI_TCD value WE30
    Authorization object S_CTS_ADMI
    Field name CTS_ADMFCT  value TABL
    Authorization object S_TABU_DIS
    Field name ACTVT      value 03
    Field name DICBERCLS  value
    Then check if the idoc and its segments have been released in R3.

Maybe you are looking for

  • ITunes not adding / deleting in with iOS7: do I have to click Sync every time?

    I have an iPhone 4s with iOS 7.0.4 (11B554a) and iTunes 11.1.3.8. I am running into problems when I drag music or audiobooks from my iTunes library to my iPhone. 1. I originally dragged an audibook to my phone and it stayed "greyed out" in iTunes. Th

  • How do I set ical default values in lion?

    I have just upgraded to Lion and so far, so good.  In the new iCal, how do I set the default values?  In the old version, when you clicked on the calendar, the default value was a 1 hour meeting around the current time of day.  The new version defaul

  • ITunes see AE but won't switch to the AE speakers

    I have configured my new AE to connect to my existing Buffalo WZR2-G300N wireless network. When I open iTunes, I see the icon in the bottom right corner giving me the choice of my Computer speakers (running win7x64) OR my AE-connected speakers. I cho

  • ITunes hangs when I try to sync with my apple devices

    Hello, I have followed troubleshooting article iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch  but this hasn't help me fix the issue. I am running OS/X 10.9.4 and iOS 7.1.2 When I create a new user account on my MAC  the

  • Where can I find the price list?

    I would like to implement BeeHiv locally in our company, does anyone know where to find the price list and annual support fee? Thanks