SQL Deployment using DSC

I would like to know steps required to do SQL Deployment using DSC. Please let me know if anyone did.
Thank You,
Dilip

Hi Dilip,
This is the second hit from a search engine using your question title as the query:
http://colinsalmcorner.com/post/install-and-configure-sql-server-using-powershell-dsc
Perhaps that will be helpful. If not, do you have any specific questions?
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Similar Messages

  • When Deploying SSIS Packages to SQL Server using SSMS Import feature, is the package configuration file deployed at the same time?

    Hello, everyone,
    I have an SSIS package with a XML package configuration file. I deployed it to the sql server using the import feature in SSMS (in Stored Packages, right click MSDB, select Import, select the package to deploy in file system). My question is 
    Is the XML package configuration file also deployed? If so, which folder is it stored so that I can change the values in it? If not, is setting up the Configuration tab when scheduling a agent job the way to go manually bring the configuration file in?
    Your help and information is much appreciated.
    Regards

    Thank you Arthur for your reply. I appreciate it.
    A followup questions:
    I used direct setting for the configuration file path on C:\. But it needs to be on D:\ on the remote server. I can't create the D:\ path because I don't have D:\ drive on my computer (I understand I could use indirect setting to change the path in the remote
    server. But that's not the concern here).
    My question is:  since the configuration is not deployed, can I make it up by setting up the Configurations in creating the agent job step? That is, copy the configuration file to the D:\ drive on the remote server, in Configurations tab, add the configuration
    file on D:\ to the configuration. Will it work? Will the package still look for the original config file on C:\?  and if it doesn't find it there, will it cause any error?
    Thank you in advance for your help.
    Regards

  • Release Management vNext deployment succeeds without deploying the DSC to the target.

    All of a sudden, a couple of weeks ago, our vNext releases stopped working.
    The log in the release management client says that the release has been deployed successfully, but nothing has actually happened on the target server. The log looks like this (which is bad)...
    Copying recursively from \\xxxxx.co.nz\Public\Share\Development\Builds\DispatchService_MAIN\DispatchService_MAIN_1.1.7.0\DispatchService\_PublishedWebsites\DispatchService to C:\Windows\DtlDownloads\DispatchService Component succeeded.
    That's all it says. No error, no nothing.
    It used to look like this (which was good)...
    Copying recursively from \\xxx.co.nz\Public\Share\Development\Builds\SosService_MAIN\SosService_MAIN_1.1.32.0\SOSWindowsService to C:\Windows\DtlDownloads\SosServices succeeded.
    Perform operation 'Invoke CimMethod' with following parameters, ''methodName' = SendConfigurationApply,'className' = MSFT_DSCLocalConfigurationManager,'namespaceName' = root/Microsoft/Windows/DesiredStateConfiguration'.
    An LCM method call arrived from computer BDWEB10 with user sid S-1-5-21-3667390900-813461161-666584507-16981.
    [BDWEB10]: LCM: [ Start Set ]
    [BDWEB10]: LCM: [ Start Resource ] [[bStopService]StopTheService]
    [BDWEB10]: LCM: [ Start Test ] [[bStopService]StopTheService]
    [BDWEB10]: LCM: [ End Test ] [[bStopService]StopTheService] in 0.0000 seconds.
    [BDWEB10]: LCM: [ Start Set ] [[bStopService]StopTheService]
    [BDWEB10]: [[bStopService]StopTheService] Stopping service SosServiceDevReviewPci
    [BDWEB10]: LCM: [ End Set ] [[bStopService]StopTheService] in 0.1400 seconds.
    [BDWEB10]: LCM: [ End Resource ] [[bStopService]StopTheService]
    [BDWEB10]: LCM: [ Start Resource ] [[File]CopyDeploymentBits]
    [BDWEB10]: LCM: [ Start Test ] [[File]CopyDeploymentBits]
    etc etc
    I have tried many things, and have discovered some clues, but have filed to find a solution.
    It seems that it is successfully creating the .mof file on the "Deploy using PS/DSC Server" but then it deletes the .mof file and does not try to do a Start-DscConfiguration with the .mof file.
    This is very frustrating, as we have sunk an awful lot of time and money into Microsoft Release Manager.
    Does anyone have any ideas?

    Hi Leighton,  
    Thanks for your post.
    You’re using TFS 2013 Update 4 and Release Management 2013 Update 4?
    Do you mean that the files be copied to C:\Windows\DtlDownloads\DispatchServices folder on target machine as expect, but no file be executed to perform the deploy?
    You said the release template works fine a  couple of weeks ago, do you know which changes happened on this release template after that week? 
    Only this current one release template cannot works? Or if you create a new release template to run DSC deploy, it will receive the same result too?
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • SSIS Package Deployment using Catalog services

    Hello All,
    I have SSIS Package developed using SSIS 2012,now whenever I try to deploy it using catalog service I am getting an error saying Create Master key or Restore master Key.
    Please advice me on this.
    Thanks,
    Santhosh
    Please have look on the comment

    Can you post the exact error message?
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Database Design
    New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

  • How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

    Hi my name is vishal
    For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
    Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using System.Data.SqlClient;
    using iTextSharp.text;
    using iTextSharp.text.pdf;
    using System.Diagnostics;
    using System.IO;
    namespace DRRS_CSharp
    public partial class frmPDF : Form
    public frmPDF()
    InitializeComponent();
    private void button1_Click(object sender, EventArgs e)
    Document doc = new Document(PageSize.A4.Rotate());
    var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    doc.SetMargins(50, 50, 50, 50);
    doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
    doc.Open();
    PdfPTable table = new PdfPTable(6);
    table.TotalWidth =530f;
    table.LockedWidth = true;
    PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
    cell.Colspan = 6;
    cell.HorizontalAlignment = 0;
    table.AddCell(cell);
    Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
    para.Alignment = Element.ALIGN_CENTER;
    iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
    png.ScaleToFit(105f, 105f);
    png.Alignment = Element.ALIGN_RIGHT;
    SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
    SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
    conn.Open();
    SqlDataReader dr;
    dr = cmd.ExecuteReader();
    table.AddCell("Reprocessing Date");
    table.AddCell("Patient Name");
    table.AddCell("Dialyzer(Manufacturer,Size)");
    table.AddCell("No.of Reuse");
    table.AddCell("Verification");
    table.AddCell("DialyzerID");
    while (dr.Read())
    table.AddCell(dr[2].ToString());
    table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
    table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
    table.AddCell("@count".ToString());
    table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
    table.AddCell(dr[0].ToString());
    dr.Close();
    table.SpacingBefore = 15f;
    doc.Add(para);
    doc.Add(png);
    doc.Add(table);
    doc.Close();
    System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
    if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
    var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
    this.Close();
    The above code executes well with no problem at all!
    As you can see the file to which i create and save and open my pdf report is
    AssignedDialyzer.pdf.
    The column headers of table in pdf report from c# windows forms using iTextSharp are
    "Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
    "DialyzerID".
    However the problem i am facing is after execution and opening of document is my
    column headers in table in pdf report from
    c# and datas in it all appear in bold.
    I have browsed through net regarding to solve this problem but with no success.
    What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
    Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
    I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
    Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
    If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
    vb6,adodb with ms access using iTextSharp?
    I have approached Sound Forge.Net for help but with no success.
    I hope anyone/someone truly understands what i am trying to ask!
    I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
    Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
    I hope i get a reply in terms of solving this problem.
    vishal

    Hi,
    About iTextSharp component issue , I think this case is off-topic in here.
    I suggest you consulting to compenent provider.
    http://sourceforge.net/projects/itextsharp/
    Regards,
    Marvin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do i connect to sql server using java?

    hi ever body
    i need to connect to sql server using java
    what is the driver i will use?
    thanks

    Microsoft make a jdbc driver and it is readily available through MSDN. Here is a link http://msdn2.microsoft.com/en-us/data/aa937724.aspx. Whatever jdbc driver you are looking for, Google it, and if it exists you'll find it in 10 seconds.

  • Execute Dynamic SQL statement using procedure builder

    i want to execute a dynamic SQL statment using procedure builder not using forms
    because my statement depending on a variable table name
    i know that i can do that from forms using
    FORMS_DDL('SQL_STAT');
    but i wanna to use the procedure builder
    which function i should use and how?
    please explain in example if you don't mind.
    thanks

    Hi,
    You can very well use DBMS_SQL Package supplied by Oracle for doing this.
    Search for DBMS_SQL in OTN. You will get all info regarding this.
    Regards.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by itslul:
    i want to execute a dynamic SQL statment using procedure builder not using forms
    because my statement depending on a variable table name
    i know that i can do that from forms using
    FORMS_DDL('SQL_STAT');
    but i wanna to use the procedure builder
    which function i should use and how?
    please explain in example if you don't mind.
    thanks<HR></BLOCKQUOTE>
    null

  • SQL report region source to call a pl/sql function using DB link

    Hi - I have a pl/sql function fn_dbtype(id NUMBER) defined in database X. The pl/sql function executes couple DML statements and returns a string (a SELECT query). I am able to call this function using SQL Plus (Connected to Database X) as below and it works fine:
    declare
    vSQL VARCHAR2(100);
    begin
    vSQL := fn_dbtype(1);
    end;
    The DML operations completed fine and vSQL contains the "Select" query now.
    In APEX:
    I am trying to create a SQL report in APEX using SQL query(PL/SQL function returning a sql statement) option. I am trying to figure out what to put in the region source so that the output of the "Select" query is displayed in the report.
    Moreover APEX is hosted in a different database instance. So I would need to call this pl/sql function using a DB Link.
    Please let me know what I need to put in the region source to execute the pl/sql function which returns the "Select" query thereby displaying the query output in the report. Thanks.
    Edited by: user709584 on Mar 19, 2009 2:32 PM
    Edited by: user709584 on Mar 19, 2009 2:34 PM

    try something like this:
    return fn_dbtype(1)@dblink;

  • How do I activate Office 2013 that I have deployed using ODT and App-V onto a Remote Desktop Server?

    I am setting up a demo Server 2012 R2 environment (1 DC server, 2 RDSH servers, 1 App-V server).
    I have created an Office 2013 volume license App-V package using the latest Office Deployment Toolkit. I have deployed the App-V package to an RDS server and it all works fine. However, I am unable to activate Office 2013 using the MSDN Office 2013 retail
    key because it tells me the product key is invalid for this version of Office. I've looked at the alternative of using the App-V Sequencer to create the Office 2013 package, but from what I've read this is not a Microsoft supported method.
    Is there any way that I can activate Office 2013 (volume license on RDS) using the method I've outlined above, or is there any way of using the Office2013 download from MSDN such that it can be packaged by the ODT (or App-V Sequencer) for successful deployment
    using App-V and activation using the retail Office 2013 product key on MSDN?

    True, VL channel media can't be activated with MSDN Retail pkeys (that's what I was trying to get you to understand, I figured you would be attempting that, as so many people do :(
    I've not attempted your scenario myself.
    It sounds like you aren't following the supported scenarios as (poorly) described by MS;
    The way I read their guide, for an RDS scenario, you must use a VL key [either MAK or KMS] (since a subscription product+key can't be used on RDS):
    i.e.: <Product ID="ProPlusVolume">
    http://support.microsoft.com/kb/2772509
    http://support.microsoft.com/kb/2915745
    http://technet.microsoft.com/library/dn481351.aspxhttp://blogs.technet.com/b/office_resource_kit/archive/2013/12/02/announcing-app-v-5-0-sp2-support-for-office-2013-volume-licensing-editions.aspx
    So, that all means that for RDS, you can't use anything other than VL "product" (in
    the form of an ODT-generated output) with a VL pkey. So, for your RDS demo setup, you need to use real product and real pkeys.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How can i get data from another database SQL Server use database link from

    I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

    hi,
    u should see following documentation:
    Oracle9i Heterogeneous Connectivity Administrator's Guide
    Release 1 (9.0.1)
    Part Number A88789_01
    in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
    regards
    umar

  • Error while retrieving data from PL/SQL Table using SELECT st. (Urgent!!!)

    Hi Friends,
    I am using Oracle 8.1.6 Server, & facing problems while retrieving data from a PL/SQL Table:
    CREATE or REPLACE PROCEDURE test_proc IS
    TYPE tP2 is TABLE of varchar2(10); --declared a collection
    dt2 tP2 := tP2('a','b','c');
    i NUMBER(8);
    begin
    SELECT COUNT(*) INTO i FROM TABLE(CAST(dt2 as tP2));
    DBMS_OUTPUT.PUT_LINE('**'||i);
    end;
    While executing the above procedure, I encountered foll. error:
    ERROR at line 1:
    ORA-00600: internal error code, arguments: [15419], [severe error during PL/SQL execution], [], [],
    ORA-06544: PL/SQL: internal error, arguments: [pfrrun.c:pfrbnd1()], [], [], [], [], [], [], []
    ORA-06553: PLS-801: internal error [0]
    Can anyone please help me, where the problem is??
    Is it Possible to retrieve data from PL/SQL TABLE using SELECT statement? & How ?
    Thanks in advance.
    Best Regards,
    Jay Raval.

    Thanks Roger for the Update.
    It means that have to first CREATE TYPE .. TABLE in database then only I can fire a Select statement on that TYPE.
    Actually I wanted to fire a Select statement on the TABLE TYPE, defined & declared in PLSQL stored procedure using DECLARE TYPE .. TABLE & not using CREATE TYPE .. TABLE.
    I was eager to know this, because my organization is reluctant in using CREATE TYPE .. TABLE defined in the database, so I was looking out for another alternative to access PL/SQL TABLE using Select statement without defining it database. It would have been good if I could access a PLSQL TABLE using Select statement Declared locally in the stored procedure.
    Can I summarize that to access a PL/SQL TABLE using SELECT statement, I have to first CREATE TYPE .. TABLE?
    If someone have any other idea on this, please do let me know.
    Thanks a lot for all help.
    Best Regards,
    Jay Raval.
    You have to define a database type...
    create type tP2 is table of varchar2(10)
    CREATE OR REPLACE PROCEDURE TEST_PROC
    IS
    dt2 tP2 := tP2('a','b','c');
    i NUMBER(8);
    begin
    SELECT COUNT(*) INTO i FROM TABLE(CAST (dt2 AS tP2));
    DBMS_OUTPUT.PUT_LINE('**'||i);
    end;
    This will work.
    Roger

  • Can't connect to SQL Database using new login

    I can connect to Azure SQL Database using the admin ID created when I set up the Azure account.  Now I want to set up a different login that has only regular read/write privileges.  I have followed the instructions on several web posts, to create
    a login at the server level, then create a user at the database level from the login.  When I try to connect, though, the connection fails.  I get an error message, and a GUID that I am supposed to supply to MS tech support, except that all I have
    is a standard Azure subscription, which does not include tech support.
    Here is what I have done so far:
    Logging in to the server with the admin account with SQL Mgmt Studio, I go to the master database on my Azure server, and create the login:
    CREATE LOGIN clouduser@gxw8x04nlb with PASSWORD = 'xoxoxoxo';
    This appears to work (password supplied is a "strong" password), or at least it doesn't show any error response.
    Then, connecting to the production database in Azure, I set up a user and set permissions as follow:
    CREATE USER clouduser1 FROM LOGIN clouduser@gxw8x04nlb;
    EXEC sp_addrolemember 'db_datareader', 'clouduser1'
    EXEC sp_addrolemember 'db_datawriter', 'clouduser1'
    When I attempt to connect to Azure using the new login, however, I get an error message (from SQL Mgmt Studio as well as from MS Access).  I am using the SQL Server Native Client 10.0.
    The message is:
    Connection failed:
    SQLState '28000'
    SQL Server Error 18456
    [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'clouduser'.
    Connection failed:
    SQLState: '01000'
    SQL Server Error: 40608
    [Microsoft][SQL Server Native Client 10.0][SQL Server]This session has been assigned a tracing ID of
    '271851d5-8e94-497c-a332-d9d40682bb7a'.  Provide this tracing ID to customer support when you need assistance.
    Is there some missing step I need to do, to permit the login to see the database?  I have looked for such in the various discussions about connection problems, but have not been able to find such a thing.   Or extend more permissions to the new
    user? Or specify a default user ID for a given login ?  (as they do not have the same names, in the examples I have seen).  I tried making the user ID the same as the login (w/o the server name), but that didn't seem to help, either.
    I have done numerous web searches, and tried about every variation of login or user ID, password, etc. that I can think of, and all of them encounter the same error.  It's got to be something very simple - clearly Azure supports more than one login
    per database.  But's that's all I have at the moment.  That login connects just fine, but others won't, using the same PC, middleware, IP address, etc.
    Any help would be much appreciated -
    Thanks,
         Doug

    Olaf -
    I noticed that, but all of the examples I have seen have Users named slightly differently from the Logins.  I did try logging in with the Login name instead.  No good.  I tried making the Login and the User name the same (clouduser).  Also
    no good - same symptoms.
    I think the problem is that the initial creation of the Login needs to be done WITHOUT the server name on the end.  
    Logged in to the master DB, I tried:  Create LOGIN clouduser@gxw8x04nlb with PASSWORD = 'xoxoxoxo';
    That didn't give me an error message, but I think it created a LOGIN of 'clouduser@gxw8x04nlb'.  When
    referenced from the outside world, I would need to specify 'clouduser@gxw8x04nlb@gxw8x04nlb'.
    I tried deleting the logins, and then creating the login 'clouduser' in the Master DB.  Then in
    the application DB, I created User clouduser from LOGIN clouduser, and then assigned a role.  That seems to work!
    In my connection string, File DSN, etc. I still need to supply the login as 'clouduser@gxw8x04nlb'.
     But when I am logged in to the server, and working in the Master DB or the application DB, I just refer to the Login as 'clouduser'.  
    Seems a little more complicated than it really should be, but at least I now have something that works.
    Doug
    Doug Hudson

  • Error while deploying using ant in 11g

    Hi all,
    I am trying to deploy order demo application using ant from command line in SOA 11g. I just ran the ant script to package the composite and it is giving me below mentioned error.It is referring to 1 file in all the wsdls and creating problem. Actualy, JMS_FedEx.wsdl is partner link to JMS Adapter that writes to a queue. I am confused because I have 2 more adapter created on similiar lines like this but while compiling no error references are made to those wsdls. I am not sure What's wrong with this wsdl. However, Composite gets complied and deployed using Jdeveloper. Please provide your Inputs.
    Nov 29, 2011 3:10:38 PM oracle.adf.share.ADFContext getCurrent
    WARNING: Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
    Load of wsdl "oramds:/soa/shared/workflow/TaskServiceInterface.wsdl" failed
    oracle.fabric.common.FabricException: Error in getting XML input stream: oramds:/soa/shared/workflow/TaskServiceInterface.wsdl: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/TaskServiceInterface.wsdl does not exist.
         at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:280)
         at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL(MDSMetadataManagerImpl.java:557)
         at oracle.fabric.common.metadata.MetadataManagerImpl.getDocumentAsInputStream(MetadataManagerImpl.java:159)
         at oracle.integration.platform.common.MDSMetadataManagerImpl.getDocumentAsInputStream(MDSMetadataManagerImpl.java:419)
         at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:244)
         at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:308)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:934)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Caused by: java.io.IOException: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/TaskServiceInterface.wsdl does not exist.
         at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:429)
         at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStreamWithRetry(AbstractOraMDSURLConnection.java:262)
         at oracle.mds.internal.net.AbstractOraMDSURLConnection.getInputStream(AbstractOraMDSURLConnection.java:183)
         at oracle.mds.internal.net.OraMDSURLConnection.getInputStream(OraMDSURLConnection.java:67)
         at java.net.URL.openStream(URL.java:1010)
         at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:276)
         ... 9 more
    Caused by: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/TaskServiceInterface.wsdl does not exist.
         ... 15 more
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/receivePO.wsdl] part name = part1     type = {http://xmlns.oracle.com/ns/order}PurchaseOrder" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/receivePO.wsdl] part name = part1     type = {http://xmlns.oracle.com/ns/order}PurchaseOrder
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_USPS.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_USPS.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:58)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/OracleRulesFulfillment.wsdl] part name = payload     type = {http://xmlns.oracle.com/FullfillmentRules/OracleRulesFulfillment}callFunctionStateful
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_UPS.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_UPS.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/approveLargeOrder.wsdl] part name = payload     type = {http://xmlns.oracle.com/ns/order}Order" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/approveLargeOrder.wsdl] part name = payload     type = {http://xmlns.oracle.com/ns/order}Order
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/ManualApproval_DecisionService_1.wsdl] part name = payload     type = {http://xmlns.oracle.com/ManualApproval/ManualApproval_DecisionService_1}errorInfo" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/ManualApproval_DecisionService_1.wsdl] part name = payload     type = {http://xmlns.oracle.com/ManualApproval/ManualApproval_DecisionService_1}errorInfo
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest" failed
    java.lang.Exception: Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:58)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest" failed
    java.lang.Exception: Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest" failed
    java.lang.Exception: Message part element undefined in wsdl [http://gdiora001.in.ibm.com:8015/soa-infra/services/default/validationForCC!1.0/getStatusbyCC.wsdl] part name = part1     type = {http://www.globalcompany.com/ns/CCAuthorizationService}creditcardStatusRequest
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/FulfillmentProcess.wsdl] part name = payload     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/FulfillmentProcess.wsdl] part name = payload     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_FedEx.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/JMS_FedEx.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/fulfillment}Fulfillment
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/WriteApprovalResults.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/order}Order" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/WriteApprovalResults.wsdl] part name = body     type = {http://xmlns.oracle.com/ns/order}Order
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Load of wsdl "JMS_FedEx.wsdl with Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/WriteApprovalResults_Remote.wsdl] part name = body     type = {http://xmlns.oracle.com/pcbpel/adapter/ftp/}OutboundFTPHeaderType" failed
    java.lang.Exception: Message part element undefined in wsdl [file:/C:/po/POProcessing/POProcessing/WriteApprovalResults_Remote.wsdl] part name = body     type = {http://xmlns.oracle.com/pcbpel/adapter/ftp/}OutboundFTPHeaderType
         at oracle.soa.scac.WSDLValidator.validateMessageParts(WSDLValidator.java:121)
         at oracle.soa.scac.WSDLValidator.validateMessages(WSDLValidator.java:88)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:47)
         at oracle.soa.scac.WSDLValidator.validate(WSDLValidator.java:40)
         at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:964)
         at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
         at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
         at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
    Thanks,
    Vikas Manchanda

    Read the last post please -
    Unable to Compile-All in Weblogic Fusion Demo
    Regards,
    Anuj

  • Error during deploying using sapdeploy ant task

    I am attempting to deploy a simple service which I have created using Dev studio. Instead of deploying using Dev studio, I want to use ant task for the same.
    This is the output I see in the console:
    deploy:
    [sapdeploy] Starting deployment with the following properties:
    [sapdeploy] Version Handling Rule: all
    [sapdeploy] Error Handling Strategies: [error action: 'prerequisites', error strategy: 'stop', error action: 'deploy', error strategy: 'stop']
    [sapdeploy] The targeted SAP J2EE Engines are: [server host: 'myhost', server port '50000', user name 'J2EE_ADMIN'.]
    [sapdeploy] Starting to validate the data...
    [sapdeploy] Validation ended
    [sapdeploy] root dir C:\temp\HelloWorldEAR
    [sapdeploy] Selected archives for deployment:
    [sapdeploy] 1: 'C:\temp\HelloWorldEAR\HelloWorldEAR.ear'
    [sapdeploy] Starting validation for the engine 'server host: 'myhost', server port '50000', user name 'J2EE_ADMIN'.'
    [sapdeploy] Engine data validated successfully
    [sapdeploy] Starting deployment for the engine 'server host: 'myhost', server port '50000', user name 'J2EE_ADMIN'.'
    [sapdeploy] An error occured during the deployment.
    [sapdeploy] The result of the deployment is: Error
    [sapdeploy] Deployment ended
    Where can I get more details of what might be wrong with the deploy process? I tried "-v" flag but to no avail. Syslog of the server shows nothing of interest.
    Thanks in advance for any help.
    Regards,
    Sameer

    Logs will be in log\dc_log folder.

  • How to find out if a SQL is using a bind variable or not?

    In order to make a SQL use consistent execution plan, I want to create a profile for a SQL. But I need to know if a SQL is using bind variable or not to create a profile for all the same SQLs except the literal value. How can I do that?
    Thanks in advance

    You can tell if an SQL statement uses a bind variable by looking at the SQL statement.
    If you look in the program that submits the SQL statement you can see how it constructs, prepares, and executes the statement.
    If you are just looking at the SQL in the shared pool then depending on how the statement is written and the setting of database parameters like cursor sharing then it can be more difficult but if you see a constant (actual value) that is a constant. A bind variable would appear as a name in the where clause where that name does not exist any of the tables referenced in the query. Note it is technically possible to create pl/sql variables with the same name as columns in the query but that is poor coding and leads to issues.
    Note - To Oracle two versions of the otherwise same query where one has a constant and the other has a bind variable are not the same query and often produce different plans. This is a common error made by developers new to Oracle when using explain plan. To explain a query that uses bind variables place a ":" in front of the variable name in the SQL submitted to explain plan.
    HTH -- Mark D Powell --

Maybe you are looking for

  • Mac no longer sees external USB audio device

    Under System Settings/ Sound, I no longer see my Yamaha Audiogram 3 listed as an input OR output device. When plugged into the USB connector, I have power to the device. I tried a different USB port... same thing. I reloaded the driver, rebooted stil

  • Photo Transfer From PC To IPad

    Looking for recommendations for an App (or another method) that will permit me to copy or simply drag selected photos from my PC to my IPad. Having come from the simplicity of the PC world, I am very disappointed in the complexity and need to synchro

  • How do I upload my Edge banner in EmediateAd?

    I have made a banner in Egde with a simple animation in it. But EmediateAd cant handle it. They say that I should rename all files, so that they begin with _P_ and place them in one folder. Or else they cant handle the file. Ive tried renaming the fi

  • Instructions on adding a trusted site.

    how do I change my security settings to add a trusted site?

  • BADI for ME21N

    Hi All,    I have a doubt in BADI's for ME21N T'code i:e how to disible HOLD button on ME21n T'code screen and also how to handle that BADI in that ME21n T'code. Plz give me ASAP. Thanks. Srinivas.