Sql Developer and Data Guard enabled instance

I have version 1.1.2.25 SQL Developer and when I try to connect to Oracle 10gR2 instance which is data guard enabled and its logical standby it spits few message, and then connects, but data is not visible from any table.
Is there any way to see data and other code while in logical standby instance which only in read only mode?
Thanks.

This problem came when I tried to connect to Oracle
instance which is a logical standby in data guard
setup. Eventually connection is made and then you can
not see any object.
In logical standby database its suppose to be read
only and should be available for query.
In TOAD you can see every thing and when you want to
make any change ,it spits an error and wouldn't allow
you to make any change.
My question was, why SQL Developer is not showing the
objects in the list and its contains.Perhaps we could help you if you told us what the error was.

Similar Messages

Links for SQL Developer and Data Modeler not working?

Hi folks,
I tried to access the new SQL Developer and Data Modeler links posted in the April 1 message (and on the Oracle site) from a couple of machines with no luck (empty zip files) - is there an update to the links?
Thanks!
Tomo

In Firefox zero length zip. In IE loses connection to downloads.oracle.com.

Integration of SQL Developer and Data Modelling - concerns.

In aanother thread about OSDM connections, I commented that the development team for OSDM and the core product seem to separate and Sue responded.
Sue Harper wrote:
A clarification of the Data Modeling feedback application and this forum. The developers are part of the SQL Developer development team, but as for all our features, each developer has a focus area, so the Data Modeling developers will tend to answer those questions. The reason I said that they seem to be separate as that ODSM seems to be put together completely differently. I hit another example today. I downloaded a fresh copy of osdm without JDK. On starting it up, it complained it couldn't find a jre and quit. There was no prompt to specify the location as there is with SQLDevloper and there are no configuration files to edit.
SQLDeveloper already has issues with different components doing the same differently. The number of problems has been reduced but it has taken some time and I am concerned that the introduction of a large body of new code will cause things to revert to the bad old days in terms of quality.
I may or may not end up using OSDM, but I want to have the choice. I don't want components I don't use becoming part of the application and adding bloat. The migration components are a case in point. The "migration workbench" ought to be a completely separate add-in rather than a core component and I hope this is down with OSDM.

Jim,
"I don't want components I don't use becoming part of the application and adding bloat." Absolutely. and we agree. SQL Developer Data Modeling will be a separate standalone product so that users who don't want to use SQL Developer, but who do want to model will have that option. The nice thing about an integrated solution is that if you are doing database work and then want to do some modeling, you are in one tool. Our current plans are to release the standalone product in the initial production release and then follow that with the extension to SQL Developer depending on the customer demand. We do plan to release a read only viewer as part of SQL Developer 2.0. This will be an extension, which like the Migration extension, you can switch off. and from your note, you'd prefer the reverse, that these new extensions are pieces you choose to include and not choose to exclude.
I'm not certain we'll get agreement on this, but I'll be interested. Just this morning I was updating a thread were the request was for all the pieces to be there working out of the box.
Sue

Forum for SQL Developer and Data Modeler?

I searched now for a while all the available forums but did not found a special forum for the Oracle SQL Developer tool.
Where do I post questions about it?
Is there another, separate forum for SQL Developer Data Modeler?
Peter

https://forums.oracle.com/forums/category.jspa?categoryID=501

View jobs with SQL Developer and export to file with delimiter

Hi,
is there a way to view, create and alter my database jobs with SQL developer?
And is it possible to export tables, views or simple queries to file delimited different from the CSV standard?
Diego.

Hi and Welcome to the Forum!!
To select data from a table or a view you must use the SELECT sql command. Example to get the data from your view you can
select ZMATNUM,ZMATCUR,ZMATATTR from ZMATERIALAs you have said you are using SQL Developer just execute the above query in your sql developer and it will show the data. Right click the grid and export the data to excel file.

SQL Developer and Blocking View of Other Users' Objects

I am using SQL Developer in a classroom environment. My student users can “see” Other Users objects. They cannot modify, but none the less can see the structure and data.
I only want the users to be able to see their own objects. Is there a privilege that needs to be revoked? (In using SQL Plus command line, this was not a problem.)
Thanks.
-Karen

Karen,
From sysdba account (sys/system). Run following and verify for that particular user grant is revoked. May be exit from sql developer and log back in or refresh view.
YOu can also potenially revoke all the privs from all non admin uses i.e.r even connect/resource roles and grant them back.
revoke select any table from yourschemaname;
revoke connect from schemaname;
revoke create session from schemaname;
revoke resource from schemaname;
Then just grant privs as need basis
grant connect to schemanme;
grant resource to schemaname;
grant create session to schemaname;
..Regards
Edited by: OrionNet on Jan 23, 2009 2:01 PM

Same icons for objects in SQL Developer as Data Modeler

Hello,
would it be possible to display the same icons for objects in SQL Developer as Data Modeler?
For example:
- in SQLD a session temporary table has the icon of a table with an X symbol, in Data Modeler it is just a table icon.
- in SQLD a materialized view has the icon of a table with 2 arrows, in data Modeler it is just a table icon.
Joop

Hi Joop,
I think you will find that in Data Modeler's Physical Model tree the same icons are used for temporary Tables and Materialized Views as in SQL Developer.
David

Comparision between Multimaster replication and data guard

Hi,
I have some questions regarding Multimaster Replication and Data Guard. Like
*1.)* I have a web site having database in oracle 10.2.0 and multimaster replication configured on it. But whenever i need to change the structure of the tables i
need to stop replication. So my web site is unavailable but my first priority is availability. So will it be useful for me to configure data guard.
*2.)* I have configured data guard for testing . My Database is Named as Gard and physical standby database is like stan.
it is working fine.
suppose my main database server get corrupted i have no option to start main database server. Now i left with only standby server how i can start standby server
as database main server.
*3.)* Is there any if main database stop working Standby database start working as main without dba intervention.
Thanks
Umesh
Edited by: Umesh Sharma on Jan 14, 2009 4:17 AM

Hi Umesh,
first of all you should be aware that Dataguard and Replication are two completely different things.
While the database where you replicate to is always up and open in read write mode, a physical standby can either be recovering or open in read only mode.
1.) I think from what you are telling you probably should consider using dataguard with a logical standby database, but be aware that there will be some limitations regarding datatypes.
2.) you can do a failover or a switchover, depending on your database version switchback may not be possible
3.) have a look at dataguard broker, you can use it to automate the failover
Best regards,
PP

Install Oracle XE, SQL Developer, and Toad on the same machine?

I have been trying to install Oracle SQL Developer, Toad, and Oracle Express on my work computer. Installing SQL Developer and Toad was pretty straightforward, and I was able to browse the XE database with SQL Developer. But after installing Toad, problems started. Toad was using Oracle XE's registry settings to locate ORACLE_HOME and oci.dll. So I tried changing the settings for Oracle XE in the registry. Toad now works, but not Oracle XE. And while I was going through this all, I even had a time when I had Toad and oracle xe working, but not SQL Developer. It almost looks like you can choose two of the products, but not all three.
So, my question to the community at large is "Can it be done?". In what directories do you have each product installed? What environment variables do you have set? Where is your tnsnames.ora? What Oracle registry settings do you have set (namely HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE)?
I can post my current settings, but I've been through so many iterations that these current settings don't really matter that much.
Here are the details I am looking for
Path to sqldeveloper.exe
Path to oracle.exe (for Oracle XE)
Environment Variables
ORACLE_HOME
ORACLE_BASE
TNS_ADMIN
PATH (just the oracle stuff)
Registry Settings
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORACLE_HOME
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORACLE_BASE
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\TNS_ADMIN
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\OLEDB
HKLM\SOFTWARE\Wow6432Node\ORACLE\KEY_XE\ORAMTS_CP_TRACE_DIR

I don't use toad, but there should be no reason why you can't install all 3. SQL Developer is a very clean install and affects nothing else. It doesn't add to the path, or create any registry entries except for file associations.
A toad installation should pick up your oracle client (in this case the XE code). I am curious as to why you felt you had to change registry settings. What problem were you trying to fix?
My recommendation would be to uninstall everything, clean the registry and reinstall in the order XE, Toad, SQL Developer. Test in between installations and seek help for problems as you find them. Bear in mind that this is the forum for SQL Developer. QUestions about Oracle XE would be better answered in the dedicated forum, or in the Installation forum, and questions about Toad in a toad forum.

Difference between Manual Standby and Data Guard Broker..

hi,
could any let me know any usefull docs which help to understand the difference between manual dr and data guard broker?
thanks,

>
could any let me know any usefull docs which help to understand the difference between manual dr and data guard broker?
>
Without Data Guard Broker:
http://www.oracle.com/pls/db112/to_toc?pathname=server.112/e17022/toc.htm
With Data Guard Broker:
http://www.oracle.com/pls/db112/to_toc?pathname=server.112/e17023/toc.htm
See especially why you want to use the broker:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17023/concepts.htm#i1013106
In short: You should have a good reason if you do not use the broker, because it is the officially recommended way to maintain Data Guard. It is even required for some features like Fast-Start Failover.
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Difference in data retrieved from sql developer and sqlplus prompt

SQL> select distinct snap_time from perfstat.stats$idx_stats;
SNAP_TIME
21-MAY-07
05-JUN-07
but using sql developer
select distinct snap_time from perfstat.stats$idx_stats;
SNAP_TIME
21-MAY-07
05-JUN-07
13-JUN-07
but can anyone explain the difference because it's the same database

SQL> select distinct snap_time from
perfstat.stats$idx_stats;
SNAP_TIME
21-MAY-07
05-JUN-07
but using sql developer
select distinct snap_time from
perfstat.stats$idx_stats;
SNAP_TIME
21-MAY-07
05-JUN-07
13-JUN-07
but can anyone explain the difference because it's
the same databaseIt looks to me during the interim between you run the query in sqlplus and SQL Developer, statspack generated a new snapshot.
Check your DBA_JOBS see if there's any auto statspack collection job.

SQL Developer with Data Modeler, No Design Menu Option

Using SQL Developer 3.0.04 Build MAIN-04.34 with Data Modeler. I have created a logical design and wish to forward engineer this to a relational model.
I cannot seem to find the Design Menu option to use the >> Engineer to Relational Model option which is available under the Design Menu on the Stand Alone version of SQL Developer Data Modeler.
Have checked the following locations:
Tools -> Data Modeler
View -> Data Modeler
File -> Data Modeler
Right Click on my Logical Design
I have ensure that all my entities have the Engineer To property set to a valid Relational Model.
Is this a bug or am I missing a menu option / configuration setting?
Thanks in advance for any help
John

Hi John,
you can find ">> Engineer to Relational Mode" button among other buttons for logical diagram.
Philip

Using CVS in SQL Developer for Data Modeler changes.

Hi,
I am fairly new to SQL Developer Data Modeler and associated version control mechanisms.
I am prototyping the storage of database designs and version control for the same, using the Data Modeler within SQL Developer. I have SQL Developer version 3.1.07.42 and I have also installed the CVS extension.
I can connect to our CVS server through sspi protocol and external CVS executable and am able to check out modules.
Below is the scenario where I am facing some issue:
I open the design from the checked out module and make changes and save it. In the File navigator, I look for the files that have been modified or added newly.
This behaves rather inconsistently in the sense that even after clicking on refresh button, sometimes it does not get refreshed. Next I try to look for the changes in Pending Changes(CVS) window. According to the other posts, I am supposed to look at the View - Data Modeler - Pending Changes window for data modeler changes but that shows up empty always( I am not sure if it is only tied to Subversion). But I do see the modified files/ files to be added to CVS under Versioning - CVS - Pending Changes window. The issue is that when I click on the refresh button in the window, all the files just vanish and all the counts show 0. Strangely if I go to Tools - Preferences - Versioning - CVS and just click OK, the pending changes window gets populated again( the counts are inconsistent at times).
I believe this issue is fixed and should work correctly in 3.1.07.42 but it does not seem to be case.
Also, I m not sure if I can use this CVS functionality available in SQL Dev for data modeler or should I be using an external client such as Wincvs for check in/ check out.
Please help.
Thanks

Hi Joop,
I think you will find that in Data Modeler's Physical Model tree the same icons are used for temporary Tables and Materialized Views as in SQL Developer.
David

Oracle SQL Developer and commit

I have the auto commit in SQL Worksheet unchecked and disconnect a worksheet with open transaction and the data is commited !!
I have to set another option??
When I close the SQL Developer no questions if I'm sure to close or i want to perform a commit (like toad).
Thanks.

you may want to try this forum:
SQL Developer

SQL developer online data move

Hi,
I am using SQL developer 2.1 to migrate tables from Sybase 12 database to oracle 11g.
I have used online data move option for moving sybase data into oracle tables, but even after data move is completed not all rows have been moved from sybase tables to corresponding oracle tables. Some rows are missing but still there is no error messege being displyed, how to find out what's going wrong.
Is there any log file that is being generated in case of oracle sql developer?
Please help me with this.

Hi Mandark,
This is a weakness of SQL Developers online datamove.
It doesn't have logging and you cannot tweak the data move itself.
It very basic SELECT * FROM -> INSERT INTO ... under the covers.
If some rows are failing to be inserted,but some rows are being inserted, in the same table.
Then my guess is that the data in some rows doesn't "fit" into the target row/column.
And the datatype mapping used to convert the tables/columns was not good enough.
Ex: Sybase column of VARCHAR(10000) mapped to Oracle VARCHAR2(4000).
Some data which is greater than 4000 chars.
Which causes the insert to fail for those rows with >4000 chars. But ok for other rows.
The solution (in this example) is to map Sybase VARCHAR(100000) to Oracle CLOB.
You can specify the data type mapping in the Convert page of the migration wizard.
Another workaround is to use Copy To Oracle.
http://dermotoneill.blogspot.com/2010/11/copy-to-oracle.html
This is a very simple data move feature again. But it works slightly differently than Online Data Move.
It has no logging or tweaking either, but may do the job "online" for you.
You should temporarily turn off any check constraints, triggers, keys on each table you want to move data with using this method.
If all those fail, then the only sure fire way would be to use Offline Data Move.
Regards,
Dermot
SQL Developer Team.

Sql Developer and Data Guard enabled instance

Similar Messages

Maybe you are looking for