SQL error or database missing
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *path = [documentsDirectory stringByAppendingPathComponent:@"bookdb.sql"];
// Open the database. The database was prepared outside the application.
//int retcode =sqlite3_open([path UTF8String], &database);
if (sqlite3_open([path UTF8String], &database) == SQLITE_OK)
// Get the primary key for all arrContacts.
const char *chRecordIdQuery ="SELECT pk FROM book";
sqlite3_stmt *sqlStatement;
// Preparing a statement compiles the SQL query into a byte-code program in the SQLite library.
// The third parameter is either the length of the SQL string or -1 to read up to the first null terminator.
int retcode = sqlite3preparev2(database, chRecordIdQuery, -1, &sqlStatement, NULL);
if (sqlite3preparev2(database, chRecordIdQuery, -1, &sqlStatement, NULL) == SQLITE_OK)
// We "step" through the results - once for each row.
while (sqlite3_step(sqlStatement) == SQLITE_ROW)
// The second parameter indicates the column index into the result set.
int primaryKey = sqlite3columnint(sqlStatement, 0);
// We avoid the alloc-init-autorelease pattern here because we are in a tight loop and
// autorelease is slightly more expensive than release. This design choice has nothing to do with
// actual memory management - at the end of this block of code, all the book objects allocated
// here will be in memory regardless of whether we use autorelease or release, because they are
// retained by the arrContacts array.
[self fetchContacts:primaryKey];
[arrContacts addObject:ContactName];
// "Finalize" the statement - releases the resources associated with the statement.
sqlite3_finalize(sqlStatement);
else
// Even though the open failed, call close to properly clean up resources.
sqlite3_close(database);
NSAssert1(0, @"Failed to open database with message '%s'.", sqlite3_errmsg(database));
// Additional error handling, as appropriate...
When I execute this code den the sqlite_open commands works properly , it means it can find the database and opens it but it returns error om this line
"if (sqlite3preparev2(database, chRecordIdQuery, -1, &sqlStatement, NULL) == SQLITE_OK)"
the value of int retcode = sqlite3preparev2(database, chRecordIdQuery, -1, &sqlStatement, NULL); is returned as 1 which says - SQL error or database missing .
Also , previously I used the same code in other project and there it ran succesfully.
I could not find out what is happening.
can anyone help me out ?
Try wrapping code that you submit to the forum in a pair (no slashes). It makes it much easier to read.
It is hard to say what the problem is without knowing what your db file actually looks like. Given that you've had success with this code before you might double check the db file that is in the simulator's sandbox for your application. You can go to your <username>/Library/ApplicationSupport/iPhone Simulator/User/Applications/<appropriate directory for your app>/Documents and your should see the db file that you are trying to select from.
You can check to see that it actually contains the schema and data that you expect with the command line tool: sqlite3. Run sqlite3 on you db file and then enter .dump. That will print the contents of your tables in the db.
In my experience, a problem with the "prepare" call is generally related to a mismatch between your SQL statement and the actual db's schema.
It may not help, but it is worth looking if you haven't yet.
Cheers,
Greg
Similar Messages
-
A SQLA10 production database has been crashing at a customer site.
Here's the error which displayed when I tried to unload the database...
Unloading "DBA"."schedule_profile" into C:\resq\resqprod2\db\unload\719.dat (relative to server)
Unloading "DBA"."schedules" into C:\resq\resqprod2\db\unload\720.dat (relative to server)
***** SQL error: Internal database error *** ERROR *** Assertion failed: 201501 (10.0.1.3415)
Page for requested record not a table page or record not present on page -- transaction rolled back
The database 'C:\resq\resqprod2\db\resqprod2.db' could not be unloaded.
The database 'C:\resq\resqprod2\db\resqprod2.db' could not be unloaded.
I think that backups may also have this error.
Can the database be salvaged?
Thank you,
DougHi Doug,
The error seems to be saying that a pointer is pointing to an invalid page.
Actually, the assertion message is suggesting that we were scanning for a row (record) on a particular page where we expected to find it, and didn't - the table page is likely corrupt.
Does a utility exist which would eliminate all pointers to invalid pages?
No. If the database is corrupted, it is best to move to your database recovery procedure from a valid backup. See KBA 1959391 - How can a SQL Anywhere (stand alone) database be restored from a full or incremental backup?
If you do not have a valid database backup but can still start and connect to the corrupted database (and it seems that you can), you can attempt to salvage the data out of the corrupted database tables manually to extract it to a new database (as Jinwoo suggested). See KBA 1959030 - How To Salvage Data When There are Corrupt Pages in the Database. Using -e to skip tables is appropriate and then trying to select the data that is not contained on invalid pages via the KBA instructions is your best option in this case.
Does sap/sybase offer a recovery service?
No, there is no such "recovery service" underneath SAP and any previous mentions of salvages were one-off contracts underneath Sybase Professional Services, and not a technical support service. These contracts are not available at SAP.
This topic was discussed thoroughly on the SQL Anywhere forum ( http://sqlanywhere-forum.sap.com/ ) previously here and here.
The prevention for this situation is to have properly validated backups, preferably in multiple backup generations to provide many opportunities for recovery. See: http://wiki.scn.sap.com/wiki/x/3QNcFg
Regards,
Jeff Albion
SAP Active Global Support -
Migrating from Sql server get SQL Error: ORA-00936: missing expression
All,
I'm migrating from Sql Server to oracle 10g and I'm getting a
"SQL Error: ORA-00936: missing expression" error
when the following create table statement is executed. It appears 10g does not like the CREATE DEFAULT xxxx as xxx syntax. Any ideas??
CREATE TABLE EnvCapitalOtherCostAtom (
EnvID CHAR(36) NOT NULL,
CapitalID CHAR(36) NOT NULL,
Seq FLOAT DEFAULT
CREATE DEFAULT D_Set_To_Zero
AS 0
NOT NULL,
AtomID CHAR(36) DEFAULT
CREATE DEFAULT D_NewGUID
AS newid
NOT NULL,
AtomName VARCHAR2(100) NOT NULL,
AtomName_dqa NUMBER(5,0) DEFAULT
CREATE DEFAULT D_DQA_Dflt
AS 10
NOT NULL,
CreatedOnTimeStamp TIMESTAMP(6) NOT NULL,
LastEditedOnTimeStamp TIMESTAMP(6) NOT NULL,
TFDubh_dqa NUMBER(5,0),
record_flags NUMBER(5,0) DEFAULT
CREATE DEFAULT D_Record_Flags
AS 0
NOT NULL,
record_dqa NUMBER(5,0) DEFAULT
CREATE DEFAULT D_Record_DQA
AS 30
NOT NULL
);Hi Chris,
not sure SQL Server accepts the syntax you provided either. Even more I have checked MSDN(http://msdn2.microsoft.com/en-us/library/ms173565.aspx) and they recommend:
Avoid using CREATE DEFAULT in new development work, and plan to modify applications that currently use it. Instead, use default definitions created using the DEFAULT keyword of ALTER TABLE or CREATE TABLE. CREATE DEFAULT will be removed in a future version of Microsoft SQL Server.
In Oracle you should do the same either use DEFAULT in CREATE TABLE statement or in ALTER TABLE, have a look at http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14251/adfns_constraints.htm#sthref626 for more details.
The proper Oracle syntax for your DDL should be something like:
CREATE TABLE EnvCapitalOtherCostAtom (
EnvID CHAR(36) NOT NULL,
CapitalID CHAR(36) NOT NULL,
Seq FLOAT DEFAULT 0 NOT NULL,
AtomID CHAR(36) DEFAULT SYS_GUID() NOT NULL,
AtomName VARCHAR2(100) NOT NULL,
AtomName_dqa NUMBER(5,0) DEFAULT 10 NOT NULL,
CreatedOnTimeStamp TIMESTAMP(6) NOT NULL,
LastEditedOnTimeStamp TIMESTAMP(6) NOT NULL,
TFDubh_dqa NUMBER(5,0),
record_flags NUMBER(5,0) DEFAULT 0 NOT NULL,
record_dqa NUMBER(5,0) DEFAULT 30 NOT NULL
); -
SQL Error: ORA-00936: missing expression
Hello all,
sorry i can't speak english very well
i would like to know what's wrong on my code
CREATE TABLE MOB (MOBILE VARCHAR2(20));
Insert into EXPORT_TABLE (MOBILE) values ('0124873214');
Insert into EXPORT_TABLE (MOBILE) values ('0184873214');
Insert into EXPORT_TABLE (MOBILE) values ('0174873214');
Insert into EXPORT_TABLE (MOBILE) values ('0120141115');
Insert into EXPORT_TABLE (MOBILE) values ('0104873214');
Insert into EXPORT_TABLE (MOBILE) values ('0164873214');
Insert into EXPORT_TABLE (MOBILE) values ('0194873214');
Insert into EXPORT_TABLE (MOBILE) values ('0114873214');
Insert into EXPORT_TABLE (MOBILE) values ('0144873214');
Insert into EXPORT_TABLE (MOBILE) values ('0122257278');My select statement working fine but i have problem with update
SELECT CASE (SUBSTR(MOBILE,1,3))
WHEN '012' THEN '0122'||SUBSTR(MOBILE,4,10)
WHEN '018' THEN '0128'||SUBSTR(MOBILE,4,10)
WHEN '017' THEN '0127'||SUBSTR(MOBILE,4,10)
WHEN '010' THEN '0100'||SUBSTR(MOBILE,4,10)
WHEN '016' THEN '0106'||SUBSTR(MOBILE,4,10)
WHEN '019' THEN '0109'||SUBSTR(MOBILE,4,10)
WHEN '011' THEN '0111'||SUBSTR(MOBILE,4,10)
WHEN '014' THEN '0114'||SUBSTR(MOBILE,4,10)
END "NEW MOB"
FROM MOB
RESULT
NEW MOB
01224873214
01284873214
01274873214
01220141115
01004873214
01064873214
01094873214
01114873214
01144873214
01222257278
10 rows selected i have a problem with update
UPDATE MOB
SET MOBILE = ANY( CASE (SUBSTR(MOBILE,1,3))
WHEN '012' THEN '0122'||SUBSTR(MOBILE,4,10)
WHEN '018' THEN '0128'||SUBSTR(MOBILE,4,10)
WHEN '017' THEN '0127'||SUBSTR(MOBILE,4,10)
WHEN '010' THEN '0100'||SUBSTR(MOBILE,4,10)
WHEN '016' THEN '0106'||SUBSTR(MOBILE,4,10)
WHEN '019' THEN '0109'||SUBSTR(MOBILE,4,10)
WHEN '011' THEN '0111'||SUBSTR(MOBILE,4,10)
WHEN '014' THEN '0114'||SUBSTR(MOBILE,4,10)
END "NEW MOB";
--FROM MOB);
COMMIT;Thank's allHello ahmed,
I noticed two errors in your update statment:
Here is the corrected:
UPDATE MOB
SET MOBILE = CASE (SUBSTR(MOBILE,1,3))
WHEN '012' THEN '0122'||SUBSTR(MOBILE,4,10)
WHEN '018' THEN '0128'||SUBSTR(MOBILE,4,10)
WHEN '017' THEN '0127'||SUBSTR(MOBILE,4,10)
WHEN '010' THEN '0100'||SUBSTR(MOBILE,4,10)
WHEN '016' THEN '0106'||SUBSTR(MOBILE,4,10)
WHEN '019' THEN '0109'||SUBSTR(MOBILE,4,10)
WHEN '011' THEN '0111'||SUBSTR(MOBILE,4,10)
WHEN '014' THEN '0114'||SUBSTR(MOBILE,4,10)
END
The changes made are
1) removed keyword ANY which was placed by you before the Case statement
2) removed alise "NEW MOB" of the column which you put after END keyword.. Its not needed in update statement..
HTH
Regards,
Dipali.. -
Define a Standalone Download Integrator with an Additional Where clause - SQL error
Hi,
I am trying to create a standalone integrator with an Additional Where clause. Followed the steps mentioned in the metalink note 360105.1. When I run the integrator, I get the following error message.
Please resolve the following error to continue.
SQL error: ORA-00936: missing expression occurred
processing stored SQL for Content 20007:GENERAL_441_CNT.
When I look at the log file, here is what I can see:
10/22/14 10:50 AM AJPRequestHandler-HTTPThreadGroup-15 TRACE BneHrSQLControl - SQL:SELECT FROM PER_PEOPLE_V where last_name=$PARAM$.last_name
10/22/14 10:50 AM AJPRequestHandler-HTTPThreadGroup-15 TRACE validateSQLStatement value of sqlStatement is: SELECT FROM PER_PEOPLE_V where last_name=:RSQLP1
10/22/14 10:50 AM AJPRequestHandler-HTTPThreadGroup-15 DETAIL BneHrSQLControl.validateSQLStatement() paramName: last_name
10/22/14 10:50 AM AJPRequestHandler-HTTPThreadGroup-15 DETAIL BneHrSQLControl.validateSQLStatement() error in SQL: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
So, clearly, the SQL statement that is getting built internally is wrong. Ideally, I would expect the statement to be something like this:
SELECT * FROM PER_PEOPLE_V where last_name=$PARAM$.last_name.
RDBMS : 11.2.0.3.0
Oracle Applications : 12.1.3
Any pointers towards the resolution of the issue would be of great help.
Thanks in Advance!
Lalitha.This is a duplicate post of your other question: create trigger automatic
DO NOT start duplicate threads for the same question.
Locking this thread -
SQL error in the database when accessing a table.
Hi,
I got below error at production server. Please suggest how to reslove this error.
<br>
<br>
<br>
Runtime Errors DBIF_RSQL_SQL_ERROR
<br>
Exception CX_SY_OPEN_SQL_DB
<br>
Date and Time 02.01.2011 15:55:06
<br>
<br>
<br>
<br>
<br>
Short text
<br>
SQL error in the database when accessing a table.
<br>
<br>
<br>
How to correct the error
<br>
Database error text........: "[10054] TCP Provider: An existing connection was
<br>
forcibly closed by the remote host.
<br>
[10054] Communication link failure"
<br>
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
<br>
Please check the entries in the system log (Transaction SM21).
<br>
<br>
If the error occures in a non-modified SAP program, you may be able to
<br>
find an interim solution in an SAP Note.
<br>
If you have access to SAP Notes, carry out a search with the following
<br>
keywords:
<br>
<br>
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
<br>
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
<br>
| "ADD_INSTANCE"
<br>
<br>
<br>
Information on where terminated
<br>
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
<br>
in "ADD_INSTANCE".
<br>
The main program was "SAPMSSY1 ".
<br>
<br>
In the source code you have the termination point in line 16
<br>
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
<br>
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
<br>
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
<br>
declared
<br>
in the RAISING clause of its signature.
<br>
<br>
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
<br>
code begins in line
<br>
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
<br>
<br>
<br>
<br>
Source Code Extract
<br>
<br>
Line
SourceCde
<br>
<br>
1
METHOD add_instance .
<br>
2
<br>
3
data: ls_id type swfcntbuf.
<br>
4
<br>
5
check buffer method - store in local buffer if necessary
<br>
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
<br>
7
<br>
8
CHECK m_buffer_method EQ mc_buffer_shared.
<br>
9
<br>
10
append key to list of tasks to add stored in database table SWFCNTBUF
<br>
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
<br>
12
<br>
13
ls_id-mandt = sy-mandt.
<br>
14
ls_id-id = ibf_por.
<br>
15
<br>
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
<br>
17
FROM ls_id.
<br>
18
<br>
19
IF sy-subrc EQ 0.
<br>
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
<br>
21
database locks
<br>
22
COMMIT CONNECTION r/3*wfcontainer.
<br>
23
ENDIF.
<br>
24
<br>
25
ENDMETHOD.
<br>duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum. -
dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
dyn_where TYPE string,
gx_sql_err TYPE REF TO cx_sy_open_sql_error,
gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
cx_sy_dynamic_osql_semantics INTO gx_sql_err,
cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas -
Recently i upgraded my SharePoint server 2013 to SP1, after the upgrade i received following message in manage database Status page " Databases running in compatibility range, upgrade recommended"
for Business Data Connectivity Database. Then i ran Sharepoint Configuration wizard, which fixed that error on that page but i am getting a error message while accessing BDCApplication page in manage service applications pagein central admin"
An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229
Sys Log :
The BDC Service application failed due to a SQL Exception: SQLServer host WSQLD05\DV. The error returned was: 'The EXECUTE permission was denied on the object 'proc_ar_GetAdministrationMetadataCatalogByPartitionId', database 'sp_BusinessDataConnectivity_DV13',
schema 'dbo'.'
I checked the Db role of the service app pool account, it has SPDataAccess permission over the Database. i cant recreate another application without knowing the root cause. I hope i can get better option to troubleshoot the issue.
Thank youAs per the error message, you can at least grant the BDC service application pool account the EXECUTE perimssions on the sp_BusinessDataConnectivity_DV13 database
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course -
Error during database connection to the database : MS SQL Server 2008 R2
Hi All,
I am working with ABAP Proxy to Rec JDBC( Integrating XI with MS SQL Server 2008 R2). I am using SAP PI 7.0
I am getting error in RWB at communication channel monitoring :
Error during database connection to the database URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST': SAPClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver'
I have given Connection details at Rec JDBC Communication channel as :
JDBC Driver as : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST.
Please help me in this regard. I really appreciate your valuable information and time.
Thanks and Regards,
Ayub.
Edited by: Ayubsajjid on Feb 15, 2012 8:49 AMHi All,
Thanks for all your valuable inputs on my question...
As per all your inputs, we have to install/Deploy the below required jar files in the aii_af_jmsproviderlib.sda file
ojdbc14.jar
msbase.jar
mssqlserver.jar
msutil.jar
Can you please tell me from where we will exact this .jar file, bcoz we have search lotzz but we helpless.
We install from this link http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21599--> we download sqljdbc_3.0.1301.101_enu file >sqljdbc_3.0>enu-->in that I find sqljdbc.jar and sqljdbc4.jar files only . I cant above said .jar files.
Please help me.
Regards,
Ayub. -
Loading issue : Error: sql error in the database while accessing a table
Hello,
where as one of the DTP in the process chain failed due to *Error: sql error in the database while accessing a table*, where as in the short dump it showing as Transaction log of data base is full., but i checked the data base space in DB02, more space is available . once we run the same DTP by manually its successful. its not through any errors.
could u please help me out solve the problem.
Thanks
siva kumar.it might be a lock. do you drop index before loading?
the database might be full at the moment of loading and not later if many loadings happen at the same time on the same system...
when you then rerun your dtp manually, it can go through as it's perhaps the only one running at that moment...
you can try to set the btch parameter to 1...this will help in some cases.
M. -
SQL error occurred in the database when acces
Dear All,
I am getting following error message while doing file to file scenario.
source side messages are pickedup and entering into the Queues .receiver side i cant able to see any souce messages.
SYSFAIL Message is showing in the Queues when i was double click that message its giving following message.
SQL error occurred in the database when acces
a table.
Plz, help me in this regard.
Thanks,
MaheshHi Mahesh,
Did you get a chance to check the IPC log directories
Also usually for a sysfail message you can check the smw01
You will see a bdoc with status F05. What does it say there?
or
Is it "Scheduled for outbound processing" or "recorded for outbound processing".
I guess the message has not been processed, so the next step is to go to transaction SMQ2, and check for info as to why it is not processed.
If you see a queue status of SYSFAIL, first try resetting it to "Ready" again. If it still fails then, delete that particular LUW. And if you still have some more messages in the queue just click the unlock queue button.
Reward points if this helps
Regards
Pragathi. -
DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table
Hi Gurus,
Im getting DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table error while I was importing support pack in the system. This is ERP 6.0 with EHP4 with MS SQL in back ground and I was applying the BASIS SP 04. It was in the TEST scenario and in the SPDD_SPAU_CHECK phase it threw the error.
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "[601] Could not continue scan with NOLOCK due to
data movement."
Internal call code.........: "[RSQL/FTCH/E071 ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLSVRT" or "LSVRTU01"
"TR_LAST_IMPORT_OF_OBJECT"
SPAM is ending with the above short dump. I have checked the space availability and it is OK.
Kindly help.
Renju Aravind.Hi,
this error is very often seen in case of a database corruptions. Please follow note 142731 and perform a complete database check. Send the results when they show errors.
Best regards
Clas -
SQL Error 40804 : Cannot import local database to Azure in new SQL Azure version V12
Hi,
The 'West Europe' Region is now live with the 'new' portal. Is there a way to import an existing database into SQL Azure V12 without producing SQL Error 40804.
Regards
Davidhi David,
From your description, It seems that this issue is more related to SQL Azure , I suggest you could post this issue on SQL Azure for better support.
https://social.msdn.microsoft.com/Forums/en-US/home?forum=ssdsgetstarted
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
My coldfusion service crashes intermitantly and when I check
the application logs the error that I see for the time frame is the
one below. Does anyone know where I might begain to solve this?
Thanks!
Error Executing Database
Query.coldfusion.sql.DatabaseConnectionException: Timed out trying
to establish connection The specific sequence of files included or
processed is: E:\wwwroot\lifeworks\default.cfmI'm no expert, but thought I would try to be helpful.
I was getting this same error on a regular basis.
The short term fix was to restart the ODBC server service.
The long term fix was twofold:
1. I recreated the ODBC connection in ColdFusion
Administrator to use the system connection (I was using the SA and
PW for login).
2. I created a second user ODBC connection as well as the
system one under ODBC in Windows Server 2003.
I haven't had the problem since.
I also read a pretty good set of "stuff" to try from the help
area:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_17277
Hope this helps. -
[SQL Question] ORA-00936: missing expression --- Possible Error on subquery
I have one query that is basically three subqueries together.
If I separate them, they run correctly, but once I put them together I get the Oracle error:
ORA-00936: missing expression
select associate_id, application_id, entity_id, profile_id, language, neutrals,
created_date, sf_completed_date, completed_time, parent_respondent, parent_aid, attempt, parent_attempt,
reported_top1, reported_top2, reported_top3, reported_top4, reported_top5, top1, top2, top3, top4, top5
from profiles p1
where sf_completed_date < to_date('15-aug-2006 00:00:00','DD-MM-YYYY HH24:MI:SS')
and parent_respondent is null
and parent_aid is null
and neutrals < 155
and p1.attempt in
(select nvl(max(attempt),0)
from profiles p2
where p2.associate_id = p1.associate_id
and p1.associate_id in)
(select p1.associate_id, count(*) as count
from
(select top1 as theme
from p1.profiles
union all
select top2 as theme
from p1.profiles
union all
select top3 as theme
from p1.profiles
union all
select top4 as theme
from p1.profiles
union all
select top5 as theme
from p1.profiles)
group by theme);
I'm using Golden, and this is the SQL where the error is happening:
and p1.associate_id in)
(select p1.associate_id, count(*) as countWhat is the best way to get this to run? Is it something with the way the subquery is written?
thanksTry this:
and p1.attempt in (select nvl(max(attempt),0)
from profiles p2
where p2.associate_id = p1.associate_id
and p1.associate_id in
(select p1.associate_id
, count(*) as count
from (select top1 as theme
from p1.profiles
union all
select top2 as theme
from p1.profiles
union all
select top3 as theme
from p1.profiles
union all
select top4 as theme
from p1.profiles
union all
select top5 as theme
from p1.profiles
group by theme
;
Maybe you are looking for
-
Desktop doesn't retain pic selected in iphoto
Hey all, searched for this but didn't find anything. When I select a pic in iphoto for my desktop image, it shows up for a second then reverts back to the previous image. Doesn't matter if I select the pic in iphoto or from the preferences pane, it o
-
Hello, I'm trying to create some HR location by the appropriate API. Some are already created and used in our configuration. But as for some other, we need to interface them from another system, we have to complete the list with a interface program.
-
Disable download a copy option for pdf files in SharePoint 2013
Hi, We need to disable Download A Copy option of Document library for few users of our site. We have provided them View Only rights which disables download for other files except PDF files. Kindly suggest
-
HELP, HELP, HELP, Problems using GridBagLayout with BorderLayout
I have a BorderLayout for my application. I created a JPanel that has the following items added to it: 1)Button 2)VisualComponent 3)ControllerComponent The JPanel is then added to the WEST Pane of the BorderLayout. My problem is that I can not get my
-
Hello The report should be created in two steps. First, data should be summarized up to po level and later the average of all po should be calculated with drill down by material group. See example : Life cyc