SQL*PLUS console not coming back when create a tablespace in ORACLE RAC11g

Hi all,
I have run a create command in oracle RAC 11g system (2 nodes, ASM) by SQL*PLUS, every datafile for this tablespace is 1.5GB, I want to create 6 tablespace at the first:
1. It run successfully for the first tablespace , it toook 4-5 minutes to come back;
2. It run much longer time for the second tablespace , it took over 20 minutes to come back;
3. The third tablespace , I waited for 45 minutes and it didn't come back.
I have check in alert.log, and saw all three tablespace were successfully created about 4-5 minutes. And I also use another SQL*PLUS to query in user_tablespaces. the third tablespace did display in user_tablespaces view.
From that time, I tried 4,5,6, it took me 30 minutes to create 1.5GB big tablespace. It doesn't make sense for me.
Any sugguestion? Thanks.

How did they create the disk group?
How big are the devices/LUNs?
are all of the LUNS the same size?
Check the alert log for both the RDBMS and ASM.
What redundancy did they use?
in asmca, what is the total size of the disk group(s)? ( or sum total_mb from v$asm_diskgroup for each disk group)

Similar Messages

Header Text pop up not coming up when creating Quotation with reference when created from CJ20N

I have done my configuration in VOTXN and it works.
If I create a quotation with reference with transaction VA21 the pop up comes up and the header texts are copied.
But if I do the same from transaction CJ20N (it also executes transaction VA21) the pop up windows does not come up and the text is not copied.
If someone can please tell me why this is happening?
Regards,
Carlos

Hi carlos,
with reference to existing quotation you are creating new quotation ?
but Quotation creation from project will done using DP81 ( not by VA21)
can you explain a bit ?
thanks
santosh

Approval messages not coming back when approving by mail

Hello,
We are on SRM 4.0
Approval messages are sent from SRM to different approvers by mail. This works fine.
But when the person approves by mail this doesn't work.
In transaction sost messages are still with 'grey' status and in transaction scot messages are all in status 'in transit'.
This happens only in our Production environment.
Has anyone suggestions?
Thanks,
Laurent.

Further to my previous reply , please also check the following
>
In transit
Number of send orders that are currently in process
outside of the SAP system, that is, the messages have
been transferred to the external nodes by the SAPconnect
send process but neither a positive nor a negative status
message has been received
>
check the following in your system
transaction SCOT--> in the menu
Settings ---> confirmation of reciept
have you set the value to 'SAP connect does not expect confirm.for
internet mail ?

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Test Note (Documentation Type) when creating Test Plan

Hi Gurus.
After we upgraded our SolMan 7.0 system from Support Pack (ST component ) level 19 to level 25, I noticed this new field "Test Note" (Dcoumentation Type) when creating a Test Plan in transaction STWB_2.
Initially, when I haven't chosen any project yet, this field has a list-of-values (i.e. Test Case Note, iTutor Document) but when I choose a project, the list-of-values only showing "ST". I also tried choosing another project and there is no value in the list.
Does anyone know where this list is coming from or how I can configure this?
It looks like project-related and but I couldn't find any settings for this.
Can this field be turned off so it will not show in the screen?
Thanks,
Tess

Hi Tess,
The documentation type ST is the standard documentation type for test notes.
Test notes are needed by testers to document results in detail during/after testing a test case.
In SOLAR_PROJECT_ADMIN there is the text menu 'GOTO - Project Template - Implementation Projects'
and then there to the tap 'Documentation Types' to do the default settings for 'ST' for all implementation projects.
Otherwise you'll have to change settings in the administration for each project!
There you can assign your own documentation template for ST in the central settings.
If you are using other project types for testing you'll have to do the same for each project type.
Regards,
Adelbert

I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS

I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.

we have a same problem

Able to connect to database from SQL plus but not from Oracle SQL developer

Hi
I have two database editions in my system Oracle XE and Oracle EE. I am able to connect to EE database through SQL plus but not through SQL developer.Please tell me how to do it.
All settings are good.I am able to connect to the database before installing XE.I need both for my work(different projects).
And the default listener started is XE's.Please tell me how to change the default one to EE or tell me how to connect through SQL developer??
Regards
Harsha

I Solved it.
I copied the text from listener.ora for EE
and added it in the other one.
It works after restart.

Field not set: ParentEPSObjectId when creating Project.

Hi everyone,
I'm developing .net application and getting data from primavera by using p6 web service. At the moment I stuck on project creation. I'm using following code to create a new project:
Public Function CreateOneProject(pProjectName As String, pProjectId As String, pParentEpsObjectId As Integer, pPlannedStart As Date, pPlannedFinish As Date, pParentOBSObjectId As Integer) As Integer
     Dim vNewProject As Project()
     vNewProject = New Project(0) {}
     Dim vProject As New Project()
     vProject.Name = pProjectName
     vProject.Id = pProjectId
     vProject.ParentEPSObjectId = pParentEpsObjectId
     vProject.StartDate = pPlannedStart
     vProject.FinishDate = pPlannedFinish
     vProject.OBSObjectId = pParentOBSObjectId
     vNewProject(0) = vProject
     Dim retVal As Integer() = gProjectService.CreateProjects(vNewProject)
     Return retVal(0)
End Function
And getting error message: Field not set:ParentEPSObjectId when creating Project.
EPS Object ID i'm selecting from lookup. In this lookup datasource I have following fields from ReadEPS: ObjectId, Name, Id, ParentObjectID.
As I understood, I should to get ObjectID of selected EPS and to set as parameter in CreateOneProject function. But it's not working.
Could someone help me?
Best regards,
Dmitrij

I found what was the problem.
Did not specify following field: ParentEPSObjectIdSpecified = true. With this field I can save.

HT2357 I accidently deleted all of my updates and they're not coming back. Is there any quick way to get these updates active again?

I accidentally deleted all of my updates and they're not coming back. I haven't been able to make any updates since 2006. I have a log of my past updates but I cannot seem to get them active again. Is there any easy way to get these updates active again?
This was a while ago back in 2006 but from what I can remember I actually deleted/permanently removed these updates from my list of updates. I tried keeping all the updates except for two that I did not need and somehow deleted all of the updates I wanted to keep. I've tried reseting my ignored updates but that does not bring back the updates. If i delete the two that I originally attempted to remove - it only brings those two back. I hope there is still some way to get these updates back. I appreciate any help that anyone is able to give me.
Thanks!
Plum<3

10.4.11 is the latest version of 10.4.
The security updates for 10.4 are listed here:
http://support.apple.com/kb/HT5165
If you are interested in updating to 10.5, see this tip.

I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help

I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help

lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Layer mask occasionally does not have link when created

when addidng a layer mask sometimes it does not have link when created which can get annoying when you dont realize it and you start moving groups.
its happened a few times already.

hi, most of my psds have tons of layers and i create the masks in a variety of ways, such as clciking on the mask icon or alt clicking when i have a selection going, i didnt notice anything until i started moving groups and things started getting messed up. today im going to pay attention every time i make a mask to see if there was a specific task tthat is causing it.

When creating a tablespace why should we enable LOGGING when a database is already on ARCHIVE LOG mode

Question :
When creating a tablespace why should we enable LOGGING when a database is already on ARCHIVE LOG mode ?
Example:
Create Tablespace
CREATE SMALLFILE TABLESPACE "TEST_DATA"
LOGGING
DATAFILE '+DG_TEST_DATA_01(DATAFILE)' SIZE 10G
AUTOEXTEND ON NEXT 500K MAXSIZE 31000M
EXTENT MANAGEMENT LOCAL
SEGMENT SPACE MANAGEMENT AUTO;
LOGGING: Generate redo logs for creation of tables, indexes and partitions, and for subsequent inserts. Recoverable
Are they not logged and not recoverable if we do not enable LOGGING? What is that ARCHIVELOG mode does?

What is that ARCHIVELOG Mode Does?
Whenever your database is in archive log mode , Oracle will backup the redo log files in the form of Archives so that we can recover the database to the consistent state in case of any failure.
Archive logging is essential for production databases where the loss of a transaction might be fatal.
Why Logging?
Logging is safest method to ensure that all the changes made at the tablespace will be captured and available for recovery in the redo logs.
It is just the level at which we defines:
Force Logging at DB level
Logging at Tablespace Level
Logging at schema Level
Before the existence of FORCE LOGGING, Oracle provided logging and nologging options. These two options have higher precedence at the schema object level than the tablespace level; therefore, it was possible to override the logging settings at the tablespace level with nologging setting at schema object level.

Can we create new tablespace in Oracle Database 10g Express Edition?

Hi,
Can we create new tablespace in Oracle Database 10g Express Edition instead of using the default "users" tablespace provided?
Please advise.
Thank you.

Correct. The sum of all user tablespaces is not allowed to exceed 4 GIG.
You could try shrinking your tablespaces. Theres a script called maxshrink on http://asktom.oracle.com which is useful for this.
You could compress your tables.
If you are storing lobs, you could consider storing them as bfiles.
Or upgrade to Oracle Standard Edition 1. Its not that expensive.

Procedure runs in SQL Plus, but not when called from my Oracle Form

Hi. I have this code to send an email alert as the user updates a record on my base table from my Oracle Form. I use dbms_scheduler so that it's submitted as a background job and so the email processing does not delay my Oracle Form from saving quickly. If I submit this code in SQL Plus it executes and I receive the email as expected.
begin
dbms_scheduler.create_job (
 job_name => 'IMMEDIATE_JOB',
 job_type => 'PLSQL_BLOCK',
 job_action => 'begin TTMS.dropperVacationConflict_Notify (62547, ''01-SEP-11'', ''02-SEP-11''); end;',
 number_of_arguments => 0,
 start_date => sysdate +1/24/59, -- sysdate + 1 minute
 enabled => TRUE,
 auto_drop => TRUE,
 comments => 'Immediate, one-time run');
end;However if I submit this code from a Post-Update trigger in my form the code runs without error, but my email is never received (the same parameter values would be passed to this trigger):
begin
-- Submit the email notification in the background so as to not slow down the screen while saving.
dbms_scheduler.create_job (
 job_name => 'IMMEDIATE_JOB',
 job_type => 'PLSQL_BLOCK',
 job_action => 'begin TTMS.dropperVacationConflict_Notify (:dropper_vacations.dropper_id, :dropper_vacations.begin_dt, :dropper_vacations.end_dt); end;',
 number_of_arguments => 0,
 start_date => sysdate +1/24/59, -- sysdate + 1 minute
 enabled => TRUE,
 auto_drop => TRUE,
 comments => 'Immediate, one-time run');
end; Any ideas why this might be happening?

Wow, so I changed the two procedures so that I'm only passing in one number parameter and one char parameter...
CREATE OR REPLACE procedure TTMS.job_vacationconflict_notify (p_dropper_id number, p_other char) IS
CREATE OR REPLACE PROCEDURE TTMS.dropperVacationEmailURL_new (in_dropper_id number, in_other char) ISIf I execute it like this it works and I get the email:
TTMS.job_vacationconflict_notify(62547, 99999);or like this it works and I get the email:
TTMS.job_vacationconflict_notify(62547, '99999');But if I execute it like this (I get no errors) the email is not sent:
TTMS.job_vacationconflict_notify(62547, 'ababa');So this problem really has nothing to do with date formats. It seems to have to do with whether parameter two has characters in it!!! What the heck.
Any ideas on this?
Here is the procedure I'm calling:
CREATE OR REPLACE procedure TTMS.job_vacationconflict_notify (p_dropper_id number, p_other char) IS
begin
dbms_scheduler.create_job (
 job_name => 'IMMEDIATE_JOB',
 job_type => 'PLSQL_BLOCK',
 job_action => 'begin TTMS.dropperVacationemailurl_new ('||p_dropper_id||','||p_other||'); end;',
 number_of_arguments => 0,
 start_date => sysdate +1/24/59, -- sysdate + 1 minute
 enabled => TRUE,
 auto_drop => TRUE,
 comments => 'Immediate, one-time run');
end;
/And the above procedure is calling this procedure which should be sending the email alert:
CREATE OR REPLACE PROCEDURE TTMS.dropperVacationEmailURL_new (in_dropper_id number, in_other char) IS
 myguid varchar2(15):=null;
 pcm_contact varchar2(3):=null;
 guid_contact varchar2(15):=null;
 conflict_cnt number(8):=0;
 -- Various declarations
 PSENDER VARCHAR2(200); -- From
 PRECIPIENT VARCHAR2(200); -- To
 P_CC_RECIPIENT VARCHAR2(200); -- CC
 P_BCC_RECIPIENT VARCHAR2(200); -- BCC
 PSUBJECT VARCHAR2(200); -- Subject
 PMESSAGE VARCHAR2(6000); -- Message Body
 PPARAMETER NUMBER; -- Parameter Value
 guid_valid varchar2(15); -- Used to grab the validation value of
 -- Grab name details of e-mail targets
 cursor targets is
 select guid, initcap(first_name) first_name, initcap(first_name)||' '||initcap(last_name) fullname
 from pwc_employee
 where upper(guid) = upper(guid_contact);
BEGIN
 select count(*)
 into conflict_cnt
 from dropper_bundle_assign
 where
 dropper_sched = in_dropper_id and
 trunc(sched) <> '31-DEC-29' AND
 trunc(sched) between '01-SEP-11' and '02-SEP-11' and
 trunc(sched) > trunc(sysdate);
 select distinct pcm
 into pcm_contact
 from dropper_bundle_assign
 where
 dropper_sched = in_dropper_id and
 trunc(sched) <> '31-DEC-29' AND
 trunc(sched) between '01-SEP-11' and '02-SEP-11' and
 trunc(sched) > trunc(sysdate);
 select guid
 into guid_contact
 from pwc_employee
 where initials = pcm_contact;
 -- Ensure required parameters have been passed
 if guid_contact is not null
 and in_dropper_id is not null then
 Begin
 select guid
 into guid_valid
 from pwc_employee
 where upper(guid) = upper(guid_contact);
 Exception
 when no_data_found then
 raise_application_error(-20000,'Invalid Recipient. Please check the employee table. Please try again.');
 End;
 -- In the event there are multiple targets then we will loop thru and send individual emails
 for thisone in targets loop
 PSENDER := lower(user)||'@us.ibm.com';
 PRECIPIENT := lower(thisone.guid)||'@us.ibm.com';
 P_CC_RECIPIENT := lower(thisone.guid)||'@us.ibm.com';
 P_BCC_RECIPIENT := 'ssbuechl'||'@us.ibm.com';
 PPARAMETER := TO_NUMBER(lower(in_dropper_id));
 PSUBJECT := 'TEST: Dropper Vacation '||in_other||' Conflict Notification for dropper '||in_dropper_id||' - Action Required';
 PMESSAGE := thisone.first_name||'- There is an induction conflict due to a new or updated dropper vacation. Click here to the dropper''s vacation conflicts: <a href="http://9.35.32.205:7777/forms/frmservlet?config=TTMSMENU&form=dropper_vacations&otherparams=p_dropper='||PPARAMETER||'">Dropper Id: '||PPARAMETER||'</a> (note: use your Oracle credentials when prompted for log-on information). Thanks.';
 SEND_MAIL ( PSENDER, PRECIPIENT, P_CC_RECIPIENT, P_BCC_RECIPIENT, PSUBJECT, PMESSAGE ); -- Procedure to physically send the e-mail notification
 end loop;
 else
 raise_application_error(-20001,'Recipient and Parameter Value are required. Please try again.');
 end if;
exception
 when no_data_found then
 raise_application_error(-20002,'Note: Email will not be sent because no PCM was identified as the manager or the PCM does not have a record in the Employee table. See ITS for assistance.');
 when too_many_rows then
 raise_application_error(-20003,'Note: Email will not be sent because multiple PCMs manage this dropper. Please notify each PCM manually.');
END dropperVacationEmailURL_new;
/Edited by: sharpe on Aug 17, 2011 4:38 PM
Edited by: sharpe on Aug 17, 2011 5:03 PM

SQL*Plus does not ignore '&' when included in comments

This happens when I use '&' in a comment. Ideally, I think this should have been ignored since it is part of a comment.
BEGIN
/* This tests
whether the use of & is problematic or not
DBMS_OUTPUT.PUT_LINE('Yup');
END;
Enter value for is:
old 3: whether the use of & is problematic or not
new 3: whether the use of problematic or not
PL/SQL procedure successfully completed.
Should'nt SQL*Plus ignore it even though its part of its list of reserved characters because it is part of a comment?

hi,
you can also use >>> set scan off or set define off.
sql>set define off
sql>plsql block
regards
Taj

SQL*PLUS console not coming back when create a tablespace in ORACLE RAC11g

Similar Messages

Maybe you are looking for