SQL Query fails with Fetch error

We are running JDE ERP 9.0 and have a report that gets this error
“JDB3300020 - Fetch not allowed. Prior successful Select operation required for this request.”
I’ve been troubleshooting this problem for months, and I am no closer to the root cause and need some help. I’ve engaged Microsoft support, we collected a trace but could not find anything that pointed to the cause.
Execution details:
Report runs successfully after database server is rebooted. Otherwise we have to keep rerunning as many as 15 times to get a successful run. When we discovered that report would run after the server reboot, we decided
to only restart SQL, to see if it was Query plan related but it still failed. How can we determine why the reboot is making a difference?
Any ideas/help is welcome.

Using Profiler to capture what JD Edwards sends to SQL Server seems like a good idea. And include the events Error:Exception and Error:UserMessage to see if that captures anything.
I googled on the message, and I found
http://www.jdelist.com/ubb/showflat.php?Cat=&Number=111077&page=0&view=collapsed&sb=5&o=
where the cause was that different indexes were used for SELECT and FETCH. (Whatever that means; I was not able to grasp it.)
Erland Sommarskog, SQL Server MVP, [email protected]

Similar Messages

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

SAP BW Query failing with ORA ERROR

Hi There
We have SAP BW 3.5 on AIX 5.3 TL10. Oracle is 9i (9.2.0.7). Our users are facing problems with Cost calculation job on cubes.
The job got failed with below error
Database error 1115 at FET access to table /BI0/03538
> ORA-01115: IO error reading block from file 48 (block #
> 1144987)#ORA-01110: data file 48:
> '/oracle//sapdata11/.data35.dbf'#ORA-27091: skgfqio:
> unable to queue I/O#ORA-27072: skgfdisp: I/O error#IBM AIX
> RISC System/6000 Error: 5: I/O error
Database error text........: "ORA-01115: IO error reading block from file 2
(block # 214041)#ORA-01110: data file 2:
'/oracle//sapdata4/_1/.data1'#ORA-27091: skgfqio: unable to queue
I/O#ORA-27072: skgfdisp: I/O error#IBM AIX RISC System/6000 Error: 5: I/O
error"
Internal call code.........: "[RSQL/READ/RSSDBATCH ]"
More Info:
Checked alert log, no errors in alert log. checked datafiles status and everything is perfect!! The errors are appearing in SAP application logs only
Is it due to any patches missing on AIX/oracle?
Any idea guys? Looks like some oracle/AIX error?

Hello Shrinath,
please post the following content.
shell> aioo -a
Maybe you have reached the maximum number of asynchronous I/O requests.
For example in our SAP environments the following parameters are set
shell> aioo -a
               minservers = 8
               maxservers = 400
               maxreqs = 1228
               fsfastpath = 1
Regards
Stefan

Console errors "Verification failed with 1 errors" and when Deleting Overrides

Hi Guys,
When trying to delete an override for a unix server I was prompted with this error:
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
: Verification failed with 3 errors:
Error 1:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA refers to an invalid sub element Filter.
Error 2:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=ef78d342-5a82-d629-224d-2e476003f6e1,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=ef78d342-5a82-d629-224d-2e476003f6e1,LanguageID=ENA refers to an invalid sub element Filter.
Error 3:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=06522f67-c195-2dfa-c310-a0134b961fc4,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=06522f67-c195-2dfa-c310-a0134b961fc4,LanguageID=ENA refers to an invalid sub element Filter.
: Element Info with Identity DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA refers to an invalid sub element Filter.
I then exported the MP and manually deleted the Override but when I try to import it I get the same error.
I have also checked a couple of other unsealed MP and some are also affected.
I have gone through the MP XML can find no matches for any of the references. Is there a way (powershell or SQL query) where i can identify what these references are or how I should proceed to troubleshoot this issue?
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Hi Yan,
That was my understanding about the error also but there are no entries for:
ef78d342-5a82-d629-224d-2e476003f6e1
a27e1d14-8ad4-56fb-da46-0c0994054e92
06522f67-c195-2dfa-c310-a0134b961fc4
in the management pack at all.
What also is curious is that the errors refer to "LanguageID=ENA"
but the only language code present inside the management pack is ENU.
The fact that there is no ENA language pack and that there are no references matched leads me to believe
that this issue is not due to this MP its references in another.
</LanguagePack>
<LanguagePack ID="ENU" IsDefault="false">
<DisplayStrings>
There are also about 14 reference management packs this MP uses and those MP would also have a handful each which makes it difficult to troubleshoot.
Unfortunately deleting the MP isn't an option as there is a significant amount of configuration saved in it.
Any ideas on how I could identify theses references?
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

IMP-00017: following statement failed with ORACLE error 1849

Hi
We have a instance 11.1.0.7
while doing import i got the issue as:
IMP-00017: following statement failed with ORACLE error 1849:
"BEGIN "
"dbms_scheduler.create_job('"MAXIMOTSSYNC"',"
"job_type=>'STORED_PROCEDURE', job_action=>"
"'maximo_ts_job'"
", number_of_arguments=>0,"
"start_date=>'30-AUG-12 15.12.04.000000 +04:00', repeat_interval=> "
"'SYSDATE + 5/1440'"
", end_date=>NULL,"
"job_class=>'"DEFAULT_JOB_CLASS"', enabled=>FALSE, auto_drop=>TRUE,comments="
">"
"NULL"
"dbms_scheduler.enable('"MAXIMOTSSYNC"');"
"COMMIT; END;"
IMP-00003: ORACLE error 1849 encountered
ORA-01849: hour must be between 1 and 12
ORA-06512: at line 2
IMP-00091: Above error occurred on the following function and object: CREATE MAXIMOTSSYNC. Remaining PL/SQL blocks for this object will be skipped.
Import terminated successfully with warnings.
My imp command is:
imp system/manager file=schema.DMP log=schema.log fromuser=max touser=max
Please suggest on this
Thanks
Shaik

ORA-01849: hour must be between 1 and 12Error: ORA 1849
Text: hour must be between 1 and 12
Cause: An invalid hour was specified for a date using the 12-hour time format.
If a 12-hour format code (HH or HH12) is used, the specified hour must
be between 1 and 12.
Action: Enter an hour value between 1 and 12.

ORA-06540,following statement failed with ORACLE error 6540:

I was working during the last days on doing a full export/import for the database 9i I used the following script for the export .
exp system/**** full=y file=/export/export.dmp log=/export/export.log consistent=y statistics=estimate buffer=200000
And everything went fine, after that I dropped all the objects owners belonging to the tablepaces as i am doing that to solve fragmentation problems
The issue is during the import and after 50% of the tables were exported successfully I started to receive the following error
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-123: program too large
IMP-00017:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := 'C2020E'; SREC.MAXVA"
"L := 'C26338'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STA"
"TS.NUMARRAY(113,9855); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC :="
" 2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"RPT_LEDGER"','"GL_ACCOUNT_ID"', NULL"
" ,NULL,NULL,1432,.000698324022346369,0,srec,4,2); END;"
IMP-00003: ORACLE error 6540 encountered
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-123: program too large
IMP-00017: following statement failed with ORACLE error 6540:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := 'C2020B'; SREC.MAXVA"
"L := 'C2031F'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STA"
"TS.NUMARRAY(110,230); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := "
"2; DBMS_STATS.SET_COLUMN_STATS(NULL,'"RPT_LEDGER"','"COMMON_COA_ID"', NULL "
",NULL,NULL,14,.0714285714285714,0,srec,4,2); END;"
IMP-00003: ORACLE error 6540 encountered
ORA-06540: PL/SQL: compilation error
ORA-06553: PLS-123: program too large
IMP-00017: following statement failed with ORACLE error 6540:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := 'C202'; SREC.MAXVAL "
":= 'C20233'; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS"
".NUMARRAY(100,150); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2;"
" DBMS_STATS.SET_COLUMN_STATS(NULL,'"RPT_LEDGER"','"CONSOLIDATION_CD"', NULL"
" ,NULL,NULL,2,.5,0,srec,4,2); END;"
IMP-00003: ORACLE error 6540 encountered
the used script for import is
imp system/****** full=y rows=y file=/export/export.dmp log=/export/ofsaimport2.log buffer=20000000
Please note that all the tables and indexes are imported successfully even after the error started to show.
Is it something serious, should I do the import again with statistics=none or I am just fine now and it something that is just related for the statistics.

Is really "fragmentation" an issue to justify this table movement? Why do you want to "defragment" your schema? Is it because of performance issues? If this is the case you are wasting your time, if you tried to rebuild the indexes by this procedure, it is also a waste of time. If you are concerned about fragmentation because of "holes" and "islands" of unused space within segments and unused space below the HWM, that is something different, in my personal jargon, I'd rather use the term space reorganization.
If the data import was successful, then take a look at the dba_objects and verify if the program unit is still there and check its status.
You may also want to take a look at this note from AskTom that explains what this error means --> http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:571023051648
~ Madrid
http://hrivera99.blogspot.com

451 4.4.0 DNS query failed. The error was: SMTPSEND.DNS.NonExistentDomain

Hi,
I have two Exchange 2010 servers running on Windows 2008 Ent R2.
These mail servers have been running fine for a few years.
Today I noticed two things.
1. users were telling me they were having delays receiving emails from outside of our own domain. The mail gets sent out, but it takes about 15-30 mins for users outside our our domain to get their mail. Mail sent from inside our domain gets delivered right
away.
2. An error message that I see when I go to Tools->Queue Viewer in EMC. The error is: 451 4.4.0 DNS query failed. The error was: SMTPSEND.DNS.NonExistentDomain. This error shows up when you click on the "Queues" tab and then look at the
"hub version 14" under "next hop domain" column.
I'm assuming these two things are related. I don't understand why the problem is just showing up now. As I said, mail delivery has been fine for a while and I haven't done any major updates to the server in a few months.
Thanks for any ideas and suggestions as to what might be causing it and where I can look.
Mike

Hi,
1. I replaced my Cert with the same exact cert from GoDaddy, just an updated expire date.
2. We have two exchange servers.
3. The message I am seeing now, is under "Last Error" for every queue (not individual messages).
That error message is: 451 4.4.0 Primary Target IP address responded with 421 4.2.1 Unable to connect. Attempted failover to alternate host but that did not succeed.
OR
451 4.4.0 DNS query failed. The error was: SMTPSEND.DNS.NonExistentDomain. (This is the same error I mentioned earlier.
I ran some tests on mxmailbox.com for my domain name.I got the following alerts back when running a DNS check.
SOA Serial Number format is invalid. ns.rackspace.com Serial XXXXXXXX : Suggested serial format year was 1402 which is before 1970
AND
SOA Expire value out of recommended range. ns.rackspace reported Expire 604800. Expire is recommeded to be between 1209600 and 2419200
I use Rackspace DNS servers for External lookups.
Does this point my mail delay problem to Rackspace or something local on my own machine?
Thanks!
Mike

Iphone 6 plust update to 8.1 failed with unknown error (6)

Trying to update my iphone 6 plus to ios 8.1 using windows laptop running windows 7. It failed with giving message update failed with unknown error (6).
Exact error is:
 The iPhone "iPhone" could not be restored. An unknown error occured (6).
After this whenever I connect iphone to my laptop itunes shows serial number as n/a and it keeps on asking me to restore but always fails.
Any help in resolving the issue (either completing the update or restoring to factory defaults) is highly appreciates.
Thanks.
Checked the update logs and see the following at the end:
[11:07:48.0460] requested restore behavior: Erase
[11:07:48.0461] device did not return saved USB log
[11:07:48.0461] device did not return saved panic log
[11:07:48.0462] previous restore failed with exit status 0x100
[11:07:48.0463] connected to service com.apple.mobile.restored
[11:07:48.0464] using protocol version 13
[11:07:48.0464] unable to open device_map.txt: No such file or directory
[11:07:48.0465] board config = n56ap
[11:07:48.0466] no value returned for BootArgs
[11:07:48.0467] _copyDeviceProperty() failed for restore bootargs
[11:07:48.0468] no value returned for MarketingPartNumber
[11:07:48.0469] _copyDeviceProperty() failed for mpn
[11:07:48.0469] requested restore behavior: Erase
[11:07:48.0470] value query for 'HardwareModel' returned 'N56AP'
[11:07:48.0471] Established proxy for device ID 4
[11:07:48.0522] <Restore Device 06B9BF48>: operation 35 progress -1
[11:07:48.0525] requested restore behavior: Erase
[11:07:50.0998] <Restore Device 06B9BF48>: operation 28 progress -1
[11:07:59.0151] no override trust object found
[11:08:20.0357] device returned CFError with code 6
[11:08:20.0361] dumping CFError returned by restored:
[11:08:20.0364] CFError domainXXXXXXXXXXXXXXXXXXXin code:6 description:Fatal FDR Error returned from RestoredFDRCreate()
[11:08:20.0368] Sending acknowledgement that final status was received
[11:08:20.0759] Restore completed, status:6
[11:08:20.0759] Failure Description:
[11:08:20.0759] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[11:08:20.0759] Depth:1 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error 6 - Failed to handle message type StatusMsg)
[11:08:20.0759] Depth:2 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error 6 - Fatal FDR Error returned from RestoredFDRCreate())

Hi sailesh.chopra,
Thanks for the question. After reviewing your post, it sounds like you are not able to update because of an error 6. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Rendering of Proxies in AE fails with generic error messages.

*sigh* working with AVC in CS4 on my quad core has been an exercise in pain.
I've followed the optimization guides linked to in the different forum posts and that lets me zip along until I actually start adding effects. Then I am right back to a crawl. I recently discovered proxies in AE and learned that I can use "replace" in premeire to leverage those same proxies... Sweet... When I works I am back to editing in both in real time!
The problem is AE is regularly failing to generate proxies for me and I cannot figure out why. All my video is shot the same 24mbps, 60fps, 1080p (true 60i). All shot from my Canon HF S10.
The error is always "Error reading frame from file" and it always occurs just before the render is about to complete. Sometimes I get lucky and a working .mov was generated in spite of the error. Bu most times the file isn't there.
So my 2.4ghz quad core with 8gb ram can't edit the originals and I can't create proxies... I'm effectively dead in the water.
I tried using Media Encoder to generate my proxies with no success either. It fails with "Unspecified Error".
Both times I am trying to encode to Quicktime, Jpeg, Draft Settings. For the heck of it I tried different codecs, etc. Nothing seems to help. Even worse is sometimes if I just queue the same file multiple times it eventually works.
Is there anything at all I can do to make successful proxy generation less like winning the lottery?

Yeah I updated to that right away. Premiere itself seems to behave most of the time. To be honest I've hardly had any problems with Premiere even before the 4.2 update.
But AVC (mts files) seem to be very problematic in AE in general. I also experience the issue mentioned here:
http://forums.adobe.com/message/2404464
Sounds like re-encoding to another format is the only way I'll be able to work in AE reliably. So I have to figure out a way to get Media Encoder to finish it's jobs.

Cube refresh fails with an error below

Hi,
We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
Thanks,
mani
Edited by: sdid on Jul 29, 2012 11:16 PM

I work with 'sdid' and here is a better explaination of what exactly is going on -
As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
Here is how our shell looks like -
/opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
Here is what 'CubeRefresh.sh' looks like -
PLN_JAR_PATH=/opt/hyperion/Planning/bin
export PLN_JAR_PATH
. "${PLN_JAR_PATH}/setHPenv.sh"
"${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
And here is what 'setHPenv.sh' looks like -
HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
export HS_JAVA_HOME
HYPERION_HOME=/opt/hyperion
export HYPERION_HOME
PLN_JAR_PATH=/opt/hyperion/Planning/lib
export PLN_JAR_PATH
PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
export PLN_PROPERTIES_PATH
CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
export CLASSPATH
case $OS in
HP-UX)
SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
export SHLIB_PATH
SunOS)
LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
export LD_LIBRARY_PATH
AIX)
LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
export LIBPATH
echo "$OS is not supported"
esac
We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
On the other hand the manual refesh from within Planning works.
We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
Any help on this would be greatly appreciated.
Thanks
Andy
Edited by: Andy_D on Jul 30, 2012 9:04 AM

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

The installation of SAP Front-End components failed with 95 errors.

I tried to install SAP GUI 7.20 on Windows Vista X64. And I got this error message:
The installation of SAP Front-End components failed with 95 errors.
This 7.20 version used to run on this operating system fine. I reinstalled the OS, and now I got this.

Hi,
I suppose you reinstalled the same OS.
Did you install the JSDK (java) afterwards. As you must be aware Java is a pre-requisite for the SAP Frontend.
Also make sure you have set the environment variables after installing java.
Further documentation, the SAP installation manual can be found in the u201CDOCUu201D folder of the installation software.
Regards,
Rohan.

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

SQL Query fails with Fetch error

Similar Messages

Maybe you are looking for