SQL Query in SQL 2012 Reporting whith russian letters in WHERE соndition

When i try to build a report in SQL 2012 Reporting it works fine^
Select distinct sys.Netbios_Name0,sys.User_Name0, sys.Operating_System_Name_and0, arp.DisplayName0
FROM v_R_System sys
JOIN v_Add_Remove_Programs arp ON sys.ResourceID = arp.ResourceID
JOIN v_FullCollectionMembership fcm on sys.ResourceID=fcm.ResourceID
WHERE DisplayName0 like '%Microsoft Office%'
and DisplayName0 NOT like '%Update%'
and DisplayName0 NOT like '%Service%'
and DisplayName0 NOT like '%Components%'
and DisplayName0 NOT like '%MUI%'
and DisplayName0 NOT like '%Proof%'
and DisplayName0 NOT like '%File Validation%'
and DisplayName0 NOT like '%korrekturhilfen%'
and DisplayName0 NOT like '%Language Pack%'
order by DisplayName0
But if I try to set a condition
and DisplayName0 NOT like '%ANY_RUSSIAN_TEXT%'
where ANY_RUSSIAN_TEXT is some letters in Russian language, then this filter does not work and shows results which contains ANY_RUSSIAN_TEXT in DisplayName0 field.
Question: How should i set the SQL condition or maybe some SQL Reporting settings to make this query working?
If answer is helpful, please mark as answer or hit the green arrow on the left.

I asked and i will answer)))
and DisplayName0 NOT like N'%ANY_RUSSIAN_TEXT%'
This works
If answer is helpful, please mark as answer or hit the green arrow on the left.

Similar Messages

  • Updaing SQL 2005 Report Builder Reports (based on Report Models) to SQL 2012 Report Builder Reports?

    We are upgrading from SQL 2005 to SQL 2012 directly (no SQL 2008 to be installed).  We have many SSRS Reports written in Report Builder 1.0 against Report Models generated from an OLAP datasource.  In SQL 2012, Report Models can no longer
    be created or edited.  I have found many posts on this topic, including this: 
    http://social.msdn.microsoft.com/Forums/en-US/896522da-45c3-46c0-848a-16f8f02ab051/how-to-upgrade-report-models-from-report-builder-1020-to-30. which the 'answered' response states: 
    SQL Server 2012 Reporting Services does not include tools for creating or updating report models. Although you can continue
    to use existing report models as data sources in SQL Server 2012 Reporting Services reports you should consider updating your reports to remove their dependency on report models.
    But I cannot locate any instructions/documentation, etc. on how to go about "updating your reports to remove
    their dependency on report models.".  How do I take existing Report Builder 1.0 reports that point to Report Models and upgrade them to the new SQL 2012 without Report Models?  Is there a way to convert them?  Or, do they need to be rewritten
    from scratch?  If there is a link to these instructions, please post as I cannot locate it any where.  Thank you.

    Katherine thank you for helping with this.  Here is what I have tried:
    On the Report Manager (2012) site, I created a new OLAP data source.  And when I test the connection, I get the pop up "Connection created successfully."
    I then pointed my Report Builder (v1.0) report to this new Data Source (from Report Manager site, selected 'Manage' for the report, from Data Sources, selected Browse and drilled down to the new Data Source I created and selected Apply). 
    Now when I try to View the report, I receive the following error:
    An error has occurred during report processing. (rsProcessingAborted) Query execution failed for dataset 'paramDataSet'. (rsErrorExecutingCommand) The SemanticQuery element at line 7, column 279 (namespace http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling)
    cannot appear under Envelope/Body/Execute/Command.
    I then exited IE and reopened the Report Manager site.  I opened Report Builder 3.0,, selected Open and opened this same report.  Idrilled donw to Data Sources and  right clicked on dataSource1 (the only one listed) and selected Data
    Source Properties.  I kept the same name, but selected the new shared datasource I created (New DataSource), and selected OK.
    Next, I drilled down to Datasets.  There are two listed, dataSet and paramDataSet (yes, this report has parameters).  I right clicked on the dataSet and selected dataSet properties, and see that it points to dataSource1 (which is the dataSource
    I just pointed to my New DataSource).  I cancelled and checked the Data Source for paramDataSet, and it also points to dataSource1.  Selected cancel and went back to the main dataSet.
    So both datasets point to the new DataSource I created.
    If I select Run, I get the following error: 
    I select OK and right click on dataSet and select Refresh Fields and get this error:
    Can you (anyone) please explain what I am doing incorrectly?  Thank you.

  • SQL 2012 Reporting Services hang

    Hello,
    we are using SQL 2012 Reporting Services with Dynamics CRM Reports. Since a few wekkes every other day it looks like my Reproitng services do fail. CRM Reports do not work and  If I try to browse https://sql2012.mobilex.intra/Reports/Pages/Folder.aspx
    I get the login prompt but than it only shows "Could not find file 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\vsuzsax3.dll'." while the dll is always a different one. It looks like whole path C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp
    is not available at that moment. If I than restart my SQL Reporting Services service everything starts working again for one or two days...
    Any idea where I can start debugging this issue?
    kind regards,
    Dieter Tontsch, mobileX AG

    Hello Vicky, thanks for your reply,
    see attached a log-file snippet while it just occurs again. It might be a file permission issue. I will do the changes suggested by you once I am back to the office. It is true that yet the Reporting Service runs under Network Service account. Some questions:
    - you suggested to change SQL Service Logon, do you realy mean SQL service itself, or just Reporting services? Should I change all SQL services logon credentials to the same account?
    - second you said "Provide full access to the "\Documents and Settings\NetworkService\Local Settings\Temp" for any account that needs to access the report server.". I am not sure which path is meant with "\Documents and Settings\NetworkService\Local
    Settings\Temp" since there is no Documents and settings, this is users now. But I guess this is not the place you mean since there is no profile for NetworkService in there.
    But one more thin, this temporary file the server complains about like in this case 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll' is not existing at this point. I don't know if this is relevant, but it looks to me like it looks
    for a temporary file which is already gone by some reason. So, it is not the problem that the file cannot be accessed, but it is not there or not there any more, I don't know. Fact is that immediately after a Reporting Service restart, with no changes made,
    the Services work again for a while. 
    Dieter
    ui!ReportManager_0-4!115c!04/30/2015-08:00:43:: e ERROR: System.IO.FileNotFoundException: Could not find file 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll'.
    File name: 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at Microsoft.CSharp.CSharpCodeGenerator.FromFileBatch(CompilerParameters options, String[] fileNames)
       at Microsoft.CSharp.CSharpCodeGenerator.FromSourceBatch(CompilerParameters options, String[] sources)
       at Microsoft.CSharp.CSharpCodeGenerator.System.CodeDom.Compiler.ICodeCompiler.CompileAssemblyFromSourceBatch(CompilerParameters options, String[] sources)
       at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromSource(CompilerParameters options, String[] sources)
       at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
       at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
       at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
       at System.Xml.Serialization.XmlSerializer.GetSerializersFromCache(XmlMapping[] mappings, Type type)
       at System.Xml.Serialization.XmlSerializer.FromMappings(XmlMapping[] mappings, Type type)
       at System.Web.Services.Protocols.SoapClientType..ctor(Type type)
       at System.Web.Services.Protocols.SoapHttpClientProtocol..ctor()
       at Microsoft.SqlServer.ReportingServices2010.ReportingService2010..ctor()
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010..ctor(String reportServerUrl, Boolean useSharePointProxy)
       at Microsoft.ReportingServices.UI.Global.get_ReportServer()
       at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
       at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel()
       at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    ui!ReportManager_0-4!115c!04/30/2015-08:00:43:: e ERROR: System.IO.FileNotFoundException: Could not find file 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\_dww3cf5.dll'.
    File name: 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\_dww3cf5.dll'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at Microsoft.CSharp.CSharpCodeGenerator.FromFileBatch(CompilerParameters options, String[] fileNames)
       at Microsoft.CSharp.CSharpCodeGenerator.FromSourceBatch(CompilerParameters options, String[] sources)
       at Microsoft.CSharp.CSharpCodeGenerator.System.CodeDom.Compiler.ICodeCompiler.CompileAssemblyFromSourceBatch(CompilerParameters options, String[] sources)
       at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromSource(CompilerParameters options, String[] sources)
       at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
       at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
       at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
       at System.Xml.Serialization.XmlSerializer.GetSerializersFromCache(XmlMapping[] mappings, Type type)
       at System.Xml.Serialization.XmlSerializer.FromMappings(XmlMapping[] mappings, Type type)
       at System.Web.Services.Protocols.SoapClientType..ctor(Type type)
       at System.Web.Services.Protocols.SoapHttpClientProtocol..ctor()
       at Microsoft.SqlServer.ReportingServices2010.ReportingService2010..ctor()
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010..ctor(String reportServerUrl, Boolean useSharePointProxy)
       at Microsoft.ReportingServices.UI.Global.get_ReportServer()
       at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
       at Microsoft.ReportingServices.UI.GlobalLinks.Control_Init(Object sender, EventArgs args)
    ui!ReportManager_0-4!115c!04/30/2015-08:00:43:: e ERROR: HTTP status code --> 500
    -------Details--------
    System.IO.FileNotFoundException: Could not find file 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll'.
    File name: 'C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\uiy82bjf.dll'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at Microsoft.CSharp.CSharpCodeGenerator.FromFileBatch(CompilerParameters options, String[] fileNames)
       at Microsoft.CSharp.CSharpCodeGenerator.FromSourceBatch(CompilerParameters options, String[] sources)
       at Microsoft.CSharp.CSharpCodeGenerator.System.CodeDom.Compiler.ICodeCompiler.CompileAssemblyFromSourceBatch(CompilerParameters options, String[] sources)
       at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromSource(CompilerParameters options, String[] sources)
       at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
       at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
       at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
       at System.Xml.Serialization.XmlSerializer.GetSerializersFromCache(XmlMapping[] mappings, Type type)
       at System.Xml.Serialization.XmlSerializer.FromMappings(XmlMapping[] mappings, Type type)
       at System.Web.Services.Protocols.SoapClientType..ctor(Type type)
       at System.Web.Services.Protocols.SoapHttpClientProtocol..ctor()
       at Microsoft.SqlServer.ReportingServices2010.ReportingService2010..ctor()
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010..ctor(String reportServerUrl, Boolean useSharePointProxy)
       at Microsoft.ReportingServices.UI.Global.get_ReportServer()
       at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
       at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel()
       at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    ui!ReportManager_0-4!115c!04/30/2015-08:00:44:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
       at System.Threading.Thread.AbortInternal()
       at System.Threading.Thread.Abort(Object stateInfo)
       at System.Web.HttpResponse.End()
       at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)

  • SQL 2012 Reporting Services

    Doesn't SQL 2012 Reporting Services require IIs to be installed? It appears to be working on a Windows 2012 server without IIs installed.

    Hi,
    IIS is no longer needed for reporting services the web service and site are native to the ssrs service.
    This dependency was removed in 2008 actually.
    Here is some info:
    http://blogs.technet.com/b/andrew/archive/2007/12/04/sql-server-2008-reporting-services-no-longer-depends-on-iis.aspx
    hope this helps.
    Chas Hyman

  • Sharepoint 2013 Intigration with SQL 2012 (REPORTING SERVICES)

    Issue : Reporting services is not functioning with sharepoint 2013..
    I want to integrate the sql server 2012 with sharepoint 2013
    Following features are not connected
    Report Server Mode   : Native ( IT SHOULD BE SHAREOINT)
    Report Service Status : started
    If I remove the Reporting Service (Native) Feature then the Reporting services configuration doesn't show the Instance name while configuring the Reporting services.
    Pls revert soon..

    Hi Trevor,
    Yes I tried.. but the application is still not working..
    It Still seems that the reporting services is running in NATIVE MODE  and not in SharePoint Intigration Mode.
    See the PowerShell - Messages below :
    PS C:\Users\Administrator> Install-SPRSService
    PS C:\Users\Administrator> Install-SPRSService
    PS C:\Users\Administrator> Install-SPRSServiceProxy
    PS C:\Users\Administrator> get-spserviceinstance -all |where {$_.TypeName -like
    "SQL Server Reporting*"} | Start-SPServiceInstance
    WARNING: 'SQL Server Reporting Services Service' is already started on server
    'APINNOIGRECREP1'
    PS C:\Users\Administrator>
    The service is already running..
    While accessing the Reporting services configuration - and connect to default instance - it displays the Mode Native not the sharepoint..
    I already installed the Add-on of sharepoint but still same issue..
    If I remove the Native feature from My SQL server setup. then the reporting service doesn't connect and show the default instance.. Pls help on urgent basis.

  • SQL 2012 Report Builder + UAG

    Quick description of setup:  I have 4 total SharePoint servers, 2WFE's, 2APP's, and a SQL Cluster.  I am using SQL 2012, + I have installed the reporting services add-in for SQL 2012 and have gone through the entire setup.  Everything works,
    KCD, stored credentials, I am able to create reports within report builder, launch report builder and so on... When I publish the site using UAG, report builder fails to connect to the report server, in this case either of the WFE's in the farm.  I thought
    initially it was "body parsing" since looking at the diagnostic logs I noticed that the request coming in looked as if the /_vti_bin/ReportServer/ portion was missing and all I saw was "sitename.something.local:443/ReportService2010.asmx".  I added some
    entries to skip body parsing and that didnt seem to work at all.
    Running FIDDLER - I noticed that when I launch report builder, there is a 302 redirect to the main trunk, or the trunk to which the site is published on.  I see a bunch of 302's, and it just stops.. never connects.  When I try to connect from within
    report builder, I get an error saying "cannot connect to https://sitename.fqdn"  make sure the url is correct and or you have permissions. 
    It seems to me that report builder does not work through UAG.  Can anyone suggest a fix?

    Hello,
    I have a same issue, after search, they are saying to make delegation if you are using Kerberos but it didn't work either, so is there any configuration needed.
    Regards, 

  • SQL 2012 Reporting Services Print Control... FIX?

    I have an web site that uses ActiveX print control and when there is a SQL update it breaks the print control for all the end users and I have to walk around and enter my admin username/pass to fix this.I have tried a number of fixes such as:Batch script that I did up according to some MS tech blog to pull the new stuff and auto install it on workstations.AD GPO:Computer Conifg Policies Admin Temps Windows Components Internet Explorer Internet Control Panel Security Page Intranet Zone
    "Run activex controls and plugins" : Enable
    "Script ActiveX Controls Marked Safe For Scripting" : Enable
    "Download signed ActiveX Controls" : EnableGave ability to install any printer.Also I have tried various other methods, which I full forget what they were now. Ideas?My Desktops are all running Win 7 x64 Pro. with Internet Exploiter 10 x86.
    This topic first appeared in the Spiceworks Community

    Hi,
    IIS is no longer needed for reporting services the web service and site are native to the ssrs service.
    This dependency was removed in 2008 actually.
    Here is some info:
    http://blogs.technet.com/b/andrew/archive/2007/12/04/sql-server-2008-reporting-services-no-longer-depends-on-iis.aspx
    hope this helps.
    Chas Hyman

  • SQL Server 2012 Reporting services Report Builder ClickOnce in SharePoint integrated mode

    Hi
    I've installed SSRS 2012 in Integrated Mode with SharePoint 2013.
    I've created RS Application, I have the Content types for Report Builder Report but when I try to create a new Report Builder Report from a document library (using ribbon) it try to lauch the following url
    http://sp2013/bi/_layouts/15/ReportServer/RSAction.aspx?RSAction=ReportBuilder&FileUrl=http://sp2013/_layouts/15/ReportServer/rs.rsapplication&SaveLocation=http%3A%2F%2Fsp2013%2Fbi%2FDocuments&Source=http%3A%2F%2Fsp2013%2Fbi%2FDocuments%2FForms%2FAllItems%2Easpx
    which gives an 404 Not found error
    I've installed Report Builder 3.0 as standalone because from SQL installation I didn't get an Report Builder
    What else should I do ?
    I've noticed that ReportBuilder_3.....application is in webservices folder of sharepoint
    Please help
    Sorin Sandu

    Hi Sorin,
    SQL Server 2012 Reporting Services (SSRS) includes stand-alone and ClickOnce versions of Report Builder. The ClickOnce version can be used with Reporting Services installed in native or SharePoint integrated mode. For more information about how to start
    Report Builder, please see:
    http://msdn.microsoft.com/en-us/library/ms159221(v=sql.110).aspx
    Reference:
    SharePoint 2010 – SQL 2012 Reporting Services
    SharePoint 2010 - SQL 2012 Reporting Services Part 2
    Hope this helps.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • SHAREPOINT 2013 WITH SQL SERVER 2012 REPORTING SERVICES - NOT WORKING

    The SQL 2012 with SP1 is installed but the Reporting Services are not working and not able to connect the Sharepoint with it.
    i also TRIED TO install THE ADD-ON (rsSharePoint.msi) but it doesn't connect and show the Sharepoint Mode and cannot connect the Reporting services.
    If I install the Reporting Native feature then the reporting service config displays the Instance else doesn't show and connect to the sql server.
    But I am able to access the Configuration manager and TCP/IP are enabled.
    I have installed SQL 2012 and Sharepoint 2013. Please revert soon.
    Tks - Vinay

    Reporting Service
    http://msdn.microsoft.com/en-us/library/jj219068.aspx
    http://blogs.msdn.com/b/biblog/archive/2012/12/04/installing-and-configuring-sql-reporting-services-on-sharepoint-2013.aspx
    http://blogs.msdn.com/b/psssql/archive/2011/02/18/sharepoint-adventures-setting-up-reporting-services-with-sharepoint-integration.aspx
    http://dinesql.blogspot.in/2010/06/configuring-reporting-services-2008-r2_07.html
    http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL
    http://www.heysharepoint.com/problems-with-sql-2012-reporting-services/
    http://andrewcbancroft.com/2012/06/30/troubleshooting-sql-server-2012-reporting-services-and-sharepoint-2010-integration-part-1/
    Please find the helping URL
    Thanks
    Jaison A
    http://infomoss.blogspot.in

  • Reporting Services install on SQL 2012 SP1 instance blank

    Sorry for the duplicate . . . didn't think the first on posted due to VDI locking up.
    I have looked at all the links and tried the suggestions and I am still having the problem: 
    SCCM 2012 R2                         SQL 2012 SP1 SSRS installed and configured (separate boxes)
    When I try to add the reporting services role, it finds the SCCM database and verifies connectivity to it, the SSRS instance drop down is blank.
    Using a domain service accout with local admin rights on both machines and sa rights in SQL.
    There is a firewall between the Primary Server and the SQL Server and ports 80, 135, 443, 445, 1433 and the high RPC range.
    Does anyone know how it is determining the instance?  I have read it is via WMI but I am not sure if it is a query or executing a method.  I have verified the svc acct has the correct DCOM privs.

    Hi,
    How are things going? Please let us know if there is any progress.
    Regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SQL Services 2012 Reporting Services Performance Issue - PowerView

    Power view Reports are loading very slow while opening in SharePoint 2013, it is taking more than 15 secs. It is development environment, maximum 10 users , no traffic at all but still not sure why it is taking such long time.
    We have 2 servers in SharePoint farm one is for SharePoint and other is for SQL. I have gone through the logs in reporting database, attached the same below. Can you please help me what we can say from the sheet attached ,whether it is slow or fast. Or where
    we are having issue.
    SQL server version is SQL 2012 SP2.
    SharePoint 2013 is RTM.
    Gone through the below blogs but no luck.
    http://blogs.msdn.com/b/psssql/archive/2013/07/29/tracking-down-power-view-performance-problems.aspx
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4ed01ff4-139a-4eb3-9e2e-df12a9c316ff/ssrs-2008-r2-and-sharepoint-2010-performance-problems
    Thanks.
    Thanks, Ram Ch

    Hi Ram Ch,
    According to your description, your have performance issue when running your Power View report. Right?
    In this scenario, based on your screenshot, it takes long time on data retrieval. How is the performance when executing the query in SQL Server Management Studio? Since you mention there's no traffic at all and 15 seconds will not cause query
    time out, we suggest you optimize the query for retrieving data. Please refer to links below:
    Troubleshooting Reports: Report Performance
    Please share some detail information about the data query if possible. Thanks.
    Best Regards,
    Simon Hou

  • SAP NetWeaver BI with Microsoft SQL Server 2012 Reporting Services using XMLA

    I am currently implementing SAP BW and am trying to connect the Microsoft SQL Server 2012 Reporting Services product.  I am able to connect to SAP BW but there is one problem when i click on Query Designer after adding a DataSet the screen just displays the dialog prompt saying '' NO CUBES WERE FOUND. VERIFY THAT YOU HAVE SELECTED A VALID CATALOG''.
    The advanced information depicts the following:

    Hi Raunak T,
    Just a very basic question from my end:
    I believe that "Microsoft SQL server Report Builder" is the 3rd party which uses MDX as interface.
    Have you set the property using OLE DB for OLAP in your queries?
    BR
    Prabhith

  • Upgrading DPM 2012 SP1 to DPM 2012 R2 fails (DPM Setup is unable to connect to the specific instance of SQL Server Reporting Service (ID: 33431)

    The Background:
    1.  DPM 2012 SP1 was originally installed on a server with local SQL 2008 R2 instance (SQL was installed as part of DPM)
    2.  SQL database was upgraded to SQL 2012 SP1
    Now I want to upgrade DPM 2012 SP1 CU3 to R2.  It is throwing the following error.  Any help would be appreciated. 

    This absolutely fixed my issue.  I had upgraded my version of SQL and was then trying to upgrade DPM 2012 to 2012R2 and I could not figure out where the installation was querying old version of the reporting services.
    DPM Log Before:
    [6/4/2014 2:53:32 PM] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [6/4/2014 2:53:32 PM] Information : Querying WMI Namespace: \\DPMServer\root\Microsoft\SqlServer\ReportServer\RS_MSDPM2012\v10\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='MSDPM2012'
    [6/4/2014 2:53:32 PM] * Exception :  => System.Management.ManagementException: Provider load failure
    DPM Log After:
    [6/4/2014 3:25:36 PM] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is not present on this system.
    [6/4/2014 3:25:36 PM] Information : Query WMI provider for SQL Server 2008.
    [6/4/2014 3:25:36 PM] Information : Querying WMI Namespace: \\DPMServer\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$MSDPM2012' and PropertyName='Version'
    [6/4/2014 3:25:36 PM] Information : SQL Server 2008 R2 SP2 instance MSDPM2012 is present on this system.
    [6/4/2014 3:25:36 PM] Information : Inspect context initialized with
    SQL Server namespace: \\{0}\root\Microsoft\SqlServer\ComputerManagement11
    Reporting namespace: \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
    SqlServerDetected: True
    [6/4/2014 3:25:36 PM] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [6/4/2014 3:25:36 PM] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [6/4/2014 3:25:36 PM] Information : **********************************************************************************
    Thanks for This FIX!

  • SCCM 2012 SQL Server Report Builder Error

    I am trying to create a report with SQL query on SCCM 2012. I get the below error.
    TITLE: Microsoft SQL Server Report Builder
    An error occurred while executing the query.
    The SELECT permission was denied on the object 'v_GS_OPERATING_SYSTEM', database 'CM_C01', schema 'dbo'.
    ADDITIONAL INFORMATION:
    The SELECT permission was denied on the object 'v_GS_OPERATING_SYSTEM', database 'CM_C01', schema 'dbo'. (Microsoft SQL Server, Error: 229)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3000&EvtSrc=MSSQLServer&EvtID=229&LinkId=20476
    BUTTONS:
    OK

    Does your account have accesses within SQL? Bases on the error message I'm guessing not.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • QSUF (Query string url filter) and SQL Server reporting services report viewer parameters

    Hi,
    this is my issue:
    I have a SQL Server reporting services web part on a page with a report with 1 parameter, lets say it's a client list
    Then i have a QSUF that will be used to filter the clients list through the URL
    However, once i connect the filter and the report viewer web part, the parameter goes away and is no longer accessible
    I'd like to somehow keep the parameter visible, in case there is no parameter sent through the URL, i would like the user to be able to choose a client from the parameter drop down list
    I saw that there is a "send empty if no values are passed" option, but i can't seem to get this working properly and i don't know if this option will make the parameter visible again
    Any help would be appreciated
    Thanks.

    Hi,
    According to your post, my understanding is that the query string url filter web part not worked well with SQL server reproting services web part.
    Did you use the Wiki page layout in your environment?
    You can change the page to a web part page, then check whether it work.
    There is a similar thread for your reference.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/4d7584e3-8e1a-48bf-9346-32f8cb480dd1/query-string-url-filter-web-part?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

Maybe you are looking for

  • Itunes 10.6.1.7 is not sync playlists from I-tunes to ipod

    Dunno.. I wonder why I am still messing with this silly thing.. very frustrated. Upgraded the 3rd gen I pod touch to software 5.1.1, then I tunes to 10.6.1.7 and it will NOT sync my Itunes playlists to my I touch. Seems this  happens about every darn

  • No photos in the media files

    Hello Everyone, I'm fairly new to this and hope soneone can help me, I'm trying to input a few photos into a DVD project but when I open the media files and selec photos I get the message I that I need to open Iphot 2 or later to populate this sectio

  • MobileMe gallery movie in iweb too small

    I posted my videoin my MobileMe gallery. I posted two sizes, iphone size and a HD size. I then use the MobileMe gallery widget to use that video in my website. I want the large size to show up in my website. Though it only allows me to resize to the

  • MSI G4Ti4200-TP64 Driver

    I just purchased the MSI G4Ti4200-TP64, Model # MS-8886 from Fry's Electronics.  I am having problems loading the driver on my computer.  I have a SOYO SY-7VCA-E motherboard with VIA chipset VT82C694X, Pentium III 933 Mhz processor, and 512 Mb RAM.  

  • Is it possible to dynamically create psp variables?

    I'd like to be able to dynamically create psp variables on the fly.  Without getting into details; using straight shared variables defined in a library is too constraining for my application.  I've found that I can create PSP variables dynamically us