Sql question...may be very simple for gurus....

Hi All:
If table1 has columns Payment1,Payment2,Payment3.....
I want to create a view which will have columns SELL, BUY, SOMETHINGELZ and the values for these are calculated like SELL=payment1+payment2;
BUY=payment2+payment3 etc.,
Can someone tell me how am I going to do this...?hahah...guys this is the best way I could able to frame-up the question....
Thx and Hoping someone will have sometime to think about my question.?
newbie_web_developer...

Thanks a lot guys....
According to my question that is the right answer.....u answered my question....
Why is it so hard to frame a question in this sql/pl_sql....by the time you know what you want...there will be an answer in the corner of the brain......
may be i will come up with what i really want.....question which says what i want.....
Alrite guys...thank you once again...
Sudh

Similar Messages

Excel question-may be wrong forum for this!

Hello,
Not sure where to post this, but need Mac specific help for Excel for Mac. Is there a way to compare the formulas in 2 excel workbooks? I am looking for an easy and rather automated way to do this. I have seen free add ins for PC's that do this, but none for excel mac users...
One workbook is correct as far as formulas, but has outdated data. The other workbook has the correct data, but I need to check to make sure the formulas are accurate and functioning...
Thanks!

The only way I see of doing this is opening Excel Tools/Visual Basic Editor and create a visual basic script that compares workbook1 to workbook2.
My VB scripting is novice at best but this would be the more flexible way of comparing formulas between two sheets.
I would go to microsoft.com (dare I recommend!) and go to their community forums then go to Excel Programming and ask how this can be done in VB.
JTS

Question about DVDs very simple to an expert

um i have a black macbook its sixth months old and i coould never figure out is their anyway say i put a dvd in can i burn it to the comp so i can watch it on the computer without having the disc in is there anyway this can be accomplished

yes use mactheripper as stated above, or handbrake. Mactheripper can be found at versiontracker.com and handbrake at download.com (mactheripper might be there too)
Handbrake is nice because it will break them into chapters

Can anyone send real time questions which is very useful for interviews?

Appu

Hi Gayathri,
Can you send the mail id or other wise send text mail to <REMOVED>
i will send u...
Regards.
Praveen Kumar.D

Very simple question from a beginner

I am currently doing a little exercise, but I ran into a problem. I have written a class that supports operations on rational number. The fields are two long variables, one each that stores the numerator and denominator.
I have made add, subtract, multiply, and divide methods...
1. what I need help in is: beingh able to store the rational number in reduced for, with the denominator always positive
2. constructing a toString method, equals method, and compareTo method.
3. it also says "make sure the toString method correctly handles the case in which the denominator is zero by throwing an exception.
I have been working on this for a long time now, an I am stuck at this point.
I know this will be very simple for you guys and gals, but I am a beginner. Please offer some input, advice, and/or some code to help me get past this problem.
Thanks so much,
Jason

ok, here is what I have so far
public class Rational {
     public long num, den;
     public Rational(long n,long d) {
          this.num = n;
          this.den = d;
     public static void main(String args[]) {
          Rational r = new Rational(1,2);
          Rational s = new Rational(3,4);
          Rational rmuls = r.multiply(s);
          Rational rdivs = r.divide(s);
          Rational radds = r.add(s);
          Rational rsubs = r.subtract(s);
          r.print();
          s.print();
          rmuls.print();
          rdivs.print();
          radds.print();
          rsubs.print();
     public void print(){
          System.out.println(this.num+ "/" +this.den);
     public Rational multiply(Rational t){
          long n;
          long d;
          n = this.num*t.num;
          d = this.den*t.den;
          Rational answer = new Rational(n,d);
          return answer;
     public Rational divide(Rational t){
          long n;
          long d;
          n = this.num*t.den;
          d = this.den*t.num;
          Rational answer = new Rational(n,d);
          return answer;
     public Rational add(Rational t){
          long n;
          long d;
          n = (t.den*this.num)+(t.num*this.den);
          d = t.den*this.den;
          Rational answer = new Rational(n,d);
          return answer;
     public Rational subtract(Rational t){
          long n;
          long d;
          n = (t.den*this.num)-(t.num*this.den);
          d = t.den*this.den;
          Rational answer = new Rational(n,d);
          return answer;
     //public int compareTo (Rational t)??????

Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

Here's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

Can anyone answer a very simple question for me ive heard the apple was giving a free iphone 4 or 4s bumper away is there any truth to that?

can anyone answer a very simple question for me ive heard the apple was giving away iphone 4 or 4s bumpers is there any truth to that?

Not any more, no. There was a free bumper program back when the iPhone 4 originally came out. It has long since expired.

A very very very simple question

Hi guys,
I have a very simple question and standard but I cant find anywhere...
I have two dateTime variables, i need to calculate difference between this dates in days, thats it.
I tried all functions and tried without success a Java Embed task but I couldnt retrieve this objects as java.util.Date so I couldnt calculate exactly the difference in days like this pure java code:
(dataVencimento.getTime() - dataReferencia.getTime()) / 86400000L)
can you help me this?

Hi Jose
Just see if these alternate approaches works. I know there may be lot like this and you may be lucky to find out simple out of box solution itself. If you want to solve this issue and move ahead, gives these approaches a shot.
1. Create a very simple standalone WebService that takes 2 input date elements (can be of Date type or String type. If string type, convert to date in your java code). Create a simple operation like getDaysBetween(firstDate, secondDate). In the generated webservice impl class, use the java code apis (refer earlier link for usage), and get the difference. Return this value. NOW, invoke this WebService in your BPEL Process, and pass your 2 inputs (if the bpel payload elemetns are date object or string objects of date), and get output, and then use this output in your continuing bpel process.
2. This approach, I did a long back. When we insert any expression using XPath, in that editor window on bottom right side, we see many categories and for each category we see list of functions we can use, like for String, we can use concat etc. I vaguely remember reading somewhere, that we can add our own custom functions also in this section. So explore this direction and see if you can add your own function and then use that fucntion with your 2 input dates.
I have not given solution to your problem, but may be these directions can help you move ahead. Or something along these lines.
Thanks
Ravi Jegga

Very Simple C question - reading input parameters/flags... [SOLVED]

This is an extremely simple question. Please forgive me for being a noob. I am writing an application in C (with GCC) called GAPE and need to be able to pass it parameters through a shell script (/usr/bin/gape) that can determine how it runs. To start with easy stuff, I want the end-user to be able to type "gape -V" to output the version of the program. How do I do that? I understand that I need to put the shell script in /usr/bin...where should I put the actual gcc-compiled gape application? Or do I even need a shell script? Can I just put the GAPE binary in /usr/bin and pass parameters to it directly? If so, how do I do that in C? Any help is greatly appreciated.
Last edited by tony5429 (2008-03-10 12:00:21)

include <stdio.h>
main(int argc, char *argv[])
int i;
for(i = 1; i < argc; i++) //argc = the number of arguments
printf("param nr %d: %s\n", i, argv[i]); // argv[i] contain the arguments, with 0 being the program name (anyone may correct me here)
[jaqob@p238 c++-egna]$ ./a.out 1 2 3
param nr 1: 1
param nr 2: 2
param nr 3: 3
[jaqob@p238 c++-egna]$ ./a.out -h -V -zxvf
param nr 1: -h
param nr 2: -V
param nr 3: -zxvf
A very simple program that prints the parameters
And yes, you can put the program in /usr/bin/ without a shellscript
Last edited by JaQoB (2008-03-05 18:09:34)

My problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set sav

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/986549 /questions/986549]''
my problem is very simple......firefox wont allow me save my downloads to any other location than my c drive....for example i have gone into options and set save downloads to my e drive....but still firefox keeps saving them to my c drive....i have 4 internal hard drives in my rig....and have tried saving downloads to them all.......why this is happening i cant understand....i have tried lots of suggestions....and have re-installed firefox multiple times

hello, there's a general regression in firefox 27 that won't allow files to download directly into a root drive. please try to create a subfolder (like ''E:\Downloads'') and set this as default location for downloads...
also see [https://bugzilla.mozilla.org/show_bug.cgi?id=958899 bug #958899].

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
Greetings
*update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

A very simple question..Very Urgent

HI,
I have a very simple question.I am able to set up the client authentication as well as server authentication. Now do i need to authenticate (both server as well as client auth.) for every request i send to the server on https...i think it should be like that it should authenticate only for the first time and for the next upcoming requests in same session should not require any server or client authentication.. i think as it happens in browsers..
what is the fact actually??..can somebody put some light...right now in my case it is authenticating for every requests..
This is what i have done..
/****constructor part********/
// and tm are arrays of keymanagers and trustmanagers for client keystore and truststore
sslContext.init(km, tm, null);
HttpsURLConnection.setDefaultSSLSocketFactory(ssf);
HttpsURLConnection.setDefaultHostnameVerifier(new MYHostNameVerifier());
/****Method to send the request and response*********/
urlConn = (HttpsURLConnection)url.openConnection();
urlConn.setDoInput(true);
urlConn.setDoOutput(true);
OutputStream os = urlConn.getOutputStream();
ObjectOutputStream oos = new ObjectOutputStream(os);
oos.writeObject(someobject);
oos.flush();
InputStream is1 = urlConn.getInputStream();
ObjectInputStream ois = new ObjectInputStream(is1);
SomeObject retObj = null;
retObj = (SomeObject)ois.readObject();
ois.close();
System.out.println("Get String>>>>> "+retObj.getString());
I am creating the object of this class..and calling the method again and again for sending requests and response..so i think handshake everytime i call the method...what i want is that handshake should happen for the first time and for the next requests no handshake or certificates should be checked or processed..
is it possible ..how..what i need to do for that..
please help me in this..
Akhil Nagpal

Hi,
how could I achieve SSL Session Resumption using HttpsURLConnection.
Thanks.

This is a very simple question,but I don't know.Please me.Thank you!

I am a Chinese student in a university.I have a very simple question to ask.
I have writed a EJB module,and I have deployed to Weblogic8.1 successfully.
1.Now I want to write a client program.Is it necessary that the client program is packaged in the EJB package.For example ,the EJB package is Beans,is "package Beans " or "import Beans.*" necessary in my client program.
2.If I only know the EJB interfaces,that means the EJB module is writed by other programer.I want to know how I can write the client program.How can I call EJB module's method writed by other programer.Could you give me a simple example?
Thank you very much.

I have writed a EJB module,and I have deployed to
Weblogic8.1 successfully.:-)
1.Now I want to write a client program.Is it
necessary that the client program is packaged in the
EJB package.For example ,the EJB package is Beans,is
"package Beans " or "import Beans.*" necessary in my
client program.You need not package your client with the EJB. It can be a JSP/servlet or a stand-alone application.
2.If I only know the EJB interfaces,that means the
EJB module is writed by other programer.I want to
know how I can write the client program.How can I
call EJB module's method writed by other
programer.Could you give me a simple example?
import java.util.*;
import javax.naming.*;
import javax.rmi.PortableRemoteObject;
import examples.*;
class TestEJBHello {
    public static void main(String[] args) {
        Context context   = null;
        Object object     = null;
        // Hashtable for environment properties.
        Hashtable env = new Hashtable();
        env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
        env.put(Context.PROVIDER_URL, "t3://localhost:7001");
        HelloHome home            = null;
        HelloWorld hello          = null;
        try {
            context     = new InitialContext(env);
            object      = context.lookup("HelloWorldTest");
            System.out.println(" JNDI Looked up >>> " +object);
            home        = (HelloHome)PortableRemoteObject.narrow(object, HelloHome.class);
            hello       = home.create();
            System.out.println(hello.hello());
        } catch(Exception e) {
            e.printStackTrace();
        } finally {
            close(context);        // Closes the initial context.
    private static void close(Context context) {
        try {
            context.close();
            System.out.println("*** Context closed. ***");
        } catch (NamingException namingException) {
            namingException.printStackTrace();
        } catch(Exception exception) {
            exception.printStackTrace();
}Here's a sample client app code I use for a HelloWorld EJB. You need to have a EJB client JAR containing the home and remote interfaces in the classpath during compile time and runtime.
x

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

Very simple jstl question

I for the life of me have not been able to find the answer to this very simple question, googling and looking at various documentation. What is the difference between accessing properties using $ or #? Is there a difference?
Thanks

Read on this excellent explanation about the unified EL: http://java.sun.com/products/jsp/reference/techart/unifiedEL.html

Sql question...may be very simple for gurus....

Similar Messages

Maybe you are looking for