SQL Server 2000\2005 compatibility with Active Directory 2012

Hi All,
We are currently using Active Directory 2003 and will be upgrading to AD 2012. I'm trying to determine if there is any known compatibility issues when running older versions of SQL Server (2000 and 2005) when upgrading to AD 2012. I've
read forums from when others went from AD 2003 to AD 2008 and didn't experience any issues. We have the newer versions of SQL but I'm not too concerned about these. Any advice would be greatly appreciated? Has anyone been through
this process.
Thanks,

Hi CraftsmanRobert,
Based on my understanding, you used Active Directory 2003, then it would be upgraded to Active Directory 2012. You wanted to run older versions of SQL Server (2000 and 2005) with Active Directory 2012.
Firstly, there can be a compatibility problem when run older version with Active Directory 2012. SQL Server 2005 (the release version and service packs) and earlier versions of SQL Server are not supported on Windows Server 2012 R2, Windows Server 2012,
Windows 8.1, or Windows 8. For more information, please refer to this article: How to use SQL Server in Windows and Windows Server environments (http://support.microsoft.com/kb/2681562/en-us).
Besides, Microsoft doesn’t provide assisted support for SQL Server 2000 and SQL Server 2005 already. Please upgrade the existing instance of SQL Server 2000 and SQL Server 2005 to a new version like SQL Server 2012. You can download SQL Server 2012 Express
from this link:
http://www.microsoft.com/en-us/download/details.aspx?id=29062.
Best regards,
Qiuyun Yu

Similar Messages

SQL Server 2000, 2005 and 2008 migration

Hi,
we have to migrate SQL Server 2000, 2005 and 2008 to SQL Server 2014. Can anyone please help with some good links to migrate DTS and SSIS package from 2000, 2005 and 2008 to SQL Server 2014?
Regards,
Satendra Singh

Please see these links:
Migration SQL Server 2000 to SQL Server 2012
Migrating to SQL Server 2014
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

Data Import from Oracle Dump to SQL Server(2000/2005)

Hi Friends,
I'm using Oracle 10g.
I've a scenario.
I've Oracle Dump file. Now i would like import in SQL Server(2000/2005).
Can any one suggest me how to do this?
Any idea,clue will be highly appreciated.

I think you will need to import the data into SQL Server from an ASCII flat file using SQL Server DTS if avialable. You can use SQL Plus to extract the data outof Oracle into comma delimited flat files and then use SQL Server DTS load into the SQL Server database.

SQL SERVER 2000 / 2005 ( Certificate Version )

How to find out version of certificate in sql server 2000/2005...
I am working as a client plz provide me any solution like t'sql script ...........
regards
ravendraindia

Once the certificate is created in the database, you can view it by querying the
sys.certificates
systemcatalog view:
SELECTname,
pvt_key_encryption_type_desc, issuer_name
FROM
sys.certificates

TFS 2010 with Active Directory 2012 R2

Are there any known problems using TFS 2010 with Active Directory 2012 R2? Domain controllers are being updated from 2003 to 2012 R2, and the Domain/Forest mode will be set to AD DS Server 2012R2, value=6.
James Bristow, Software Configuration Manager

Hi James,
Thanks for your post.
Your AD 2012 R2 will running on your Windows Server 2012 R2 machine, right? Please note that: TFS 2010 not support Windows Server 2012 R2, so you cannot install TFS 2010 Server on this Windows Server 2012 R2 machine. Please refer to this document:
https://msdn.microsoft.com/en-us/library/dd578592.aspx.
As far as I know TFS 2010 works fine with AD 2012 R2, so you can install your TFS 2010 another machine and use this AD 2012 R2 Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SQL Server 2000-2005/2008 Upgrade

I was wondering if there was anyone out there who had been using SQL Server 2000, and upgraded it to SQL 2005/2008 during a tools upgrade? We are currently on tools 8.44 and performance is bogging down at times on SQL 2000. Curious to see if and what your experiences were? Also has anyone had any success data archiving with tools 8.44?
Appreciate replies

Hi,
I have successfully done an upgrade from tools 8.44 to 8.49 (also sql server 2000 to 2005 sp3) in 2009
The performance was way better in 2005, also managing the database :).. also you wont hav to face the dreadful deadlock problem in 2005
I should say that this activity was part of an application+tools upgrade

Inserting data into MS SQL server 2000/2005 - JEE application

Hello everyone,
Looking at the Tutorial, roster, under ejb, it uses EntityManager and persistence to insert and access data from the, what i presume the Java DB. So i tried it with my applications. I get no errors when I insert the data. Only that it is not going into the DB, which is an external database, MS SQL server. Does this mean I can only insert and access data from the database through sql statements?
Help!
Thanks
eve

Hello everyone,
I have made progress on this. And if anyone requires more details check this website:
http://www.webagesolutions.com/knowledgebase/javakb/jkb006/index.html
Also please check your firewalls when dealing with external DB. For example, the windows firewall blocks the server from access MS server DB. So in an actual of fact, my above problem was working, only that it was probably directing data to the Java DB included in the application server 9.
The progress so far, is good. The persistence xml seems to create the Tables into the database. But it does not enter data into the database. Below is the error I get:
java.lang.ClassCastException: com.sun.gjc.spi.DataSource
at productinfor.AppClientMachines$saveListener.actionPerformed(AppClientMachines.java:138)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:5501)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
at java.awt.Component.processEvent(Component.java:5266)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3968)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Aslo the error is point to this in my client:
Machinesbean sebean=(Machinesbean)ctx.lookup("jdbc/ProductDetailsDB");
And below is the xml file:
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="PRODUCTINFOR-ejbPU" transaction-type="JTA">
<provider>oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider</provider>
<jta-data-source>jdbc/ProductDetailsDB</jta-data-source>
<properties>
<property name="toplink.ddl-generation" value="create-tables"/>
</properties>
</persistence-unit>
</persistence>
Somebody also suggestion I make my persistence xml file as follows to use MS server 2000/2005:
<persistence xmlns="http://java.sun.com/xml/ns/persistence" version="1.0">
<persistence-unit name="PRODUCTDETAILS3-ejbPU">
<jta-data-source>jdbc/ProductDetailsDB</jta-data-source>
<properties>

<property name="toplink.ddl-generation" value="drop-and-create-tables"/>

<property name="toplink.platform.class.name"
value="oracle.toplink.essentials.platform.database.SQLServerPlatform"/>
</properties>
</persistence-unit>
</persistence>
Any suggestions will help. If not I hope this helps somebody else. Thanks for all your help
eve
Message was edited by:
evepokua

Oracle (Linux) to MS SQL Server 2000 (Windows 2003) with OTG

I have Oracle 9i Release 1 running on linux and i want to use Transparent Gateway to connect to MS SQL Server 2000 running on Windows 2003. Is it possible to setup this connection?
If yes, please include the detail approach of installation.
Thank you....

Dear kgronau
i tried the transperent gateway in Win2003
both sqlserver and oracle 10 g onthe same os (win2003)
Created listener and tnsname settings as per the documention spec..
then created a database link for sqlserver here.
my transpernet gateway works without any problem,
Then,
I have Oracle on Linux also,
i created a tnsname settings here for the win2003 listener (for sqlserver connection).
then created a database link for sqlserver here
im not able to connect sqlserver.
i tried to desc one table (sqlserver)
the following error i get,
do you have any idea, what i have missed???
SQL> DESC CUSTOMERS@SQLDB
ERROR:
ORA-02068: following severe error form SQLDB
ORA-03135: connection lost contact
please give some hints what is the problem
remember the listener is running on windows 2003
regards

Cakll Manager 4.1 compatibility with Active Directory 2008

I need to know the compatibility
between windows 2008 Active Directory and Call Manager 4.1. I was told Call Manager
4.1 was incompatibile with windows 2008 AD. Is that Active Directory
2008 Domain and Forest functional level? I'm moving forw
ard with replacing all our windows 2003 DCs with Windows 2008 DCs. The question is will
call manager 4.1 be compatible? Need actual windows 2003 DC or can WIndows 200
3 forest and domain functional level enough?

Hello gentlemen,
I just wanted to let you know that we actually got everything working again on our test bed environment.The DC is running on a virtualized Windows Server 2008 but with the forest and domain functional levels at 2003. What we had to do to resolve the ICM issues (Roggers, PGs and AW/HDS) was for all of the services that wouldn't automatically start, we had to update the 'log on as' settings to re-add those accounts and re-enter the passwords. Also, when running the ICMSetup util, it came back with an error saying that it couldn't see the 'Call Center Applications' OU even though it existed. To resolve that, we ran ICMSetup again, added the ICM instance, then upon going back to the main screen, exiting then re-running ICMSetup, everything worked again and the error did not re-occur. We were able to click on the various instance components (PG1A, CG1A, etc) where as before doing that, those instances were greyed out.
For our CallManager server 4.1(3) we didn't need to resolve anything on it. It appears to be running ok and phones are registered to it as well.
Mind you, this is a test bed environment, and the old test bed DC was created a few years ago, and with this new one being a copy of our existing production DC, there were many changes and updates done to it, so that's probably why the old accounts weren't recognized and new ones were created.
We don't think that will happen in our production environment, but even so, we're not going to upgrade our production DCs to Windows Server 2008 just yet.
Thanks for the feed back.
Joe

Cannot start the SQL server service after you install Active Directory

Good Morning,
Im the system admin for a small company. We have a dedicated domain controller but it is the only one. To get a second domain controller up and running on our domain, I installed the AD role on our file and SQL server. After the reboot
we couldnt get SQL up and running. I found this article
http://support.microsoft.com/kb/929665
In the article it reads
To work around this issue, repair Windows Internal Database. To do this, run the following command line at a command prompt:
Msiexec /i SSEE_10.msi CALLERID=OCSetup.exe REINSTALL=ALL REINSTALLMODE=omus /qn REBOOT=ReallySupress /l*v <var><Log_File_Path></var>
My question is what is the Log_File_Path? Is that where I installed the AD log path?
My DBA is also looking into this as well.
Thanks in advance,
Brian
Brian Fink, MCSE

Hi Brain,
what's version of SQL Server that you have installed and what's your operationg system version info?
If you are running SQL Server 2008, which is not supported on the Windows Server 2008/2008 R2 domain controll (DC), even on Windows Server 2003 DC, there are limitations. Microsoft does not recommend to install SQL Server instances and DC on the same server,
for more information, see Install SQL Server on a Domain Controller (http://msdn.microsoft.com/en-us/library/ms143506.aspx#DC_Support).
There are some threads in the forum talked about installing SQL Server and DC on the same server, here are some for your references:
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/1a2963ff-90d7-4bba-97ce-fa15f70fb6a8/
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/981ef726-d04a-4063-8008-cc7bbad854ab/
Hope this helps. Please feel free to let me know if you have more questions.
Best Regards,
Chunsong Feng [MSFT]
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Dropping multiple tables having common prefix in SQL Server 2000/2005

Hi
I used the below to drop tables having common prefix like 'GPN'
DECLARE @id varchar(255) DECLARE @dropCommand varchar(255) DECLARE tableCursor CURSOR FOR SELECT name FROM sys.tables WHERE NAME LIKE 'GPN%' OPEN tableCursor FETCH next FROM tableCursor INTO @id WHILE @@fetch_status=0 BEGIN SET @dropcommand = N'drop table ' + @id EXECUTE(@dropcommand) FETCH next FROM tableCursor INTO @id END CLOSE tableCursor DEALLOCATE tableCursor
The point is this works in SQL2005 but not in SQL2000
In SQL 2000 we get errors like
Server: Msg 137, Level 15, State 1, Line 2
Must declare the variable '@dropcommand'.
Server: Msg 137, Level 15, State 1, Line 2
Must declare the variable '@dropcommand'.
Tried the following as well : SELECT table_name FROM Information_Schema.TABLES WHERE table_name LIKE
but ended up with the same error.
Please let me know where i am going wrong and how i can correct it
Purushothama

Hi.
As far as I know SQLS2000 uses syntax:
EXEC sp_executesql @dropcommand
Isn't this a problem?
Talerod

SQL Server 2000 Enterprise Edition Compatability with Latest Operating Systems

Hi Team,
My client is using SQL Server 2000 Enterprise edition for the database in the Production.
Now,We are planning to load that data from SQL 2000 to SQL 2012 and test the functionality.
Can you please tell me on which operations systems the SQL Server 2000 is compatible to Install ?
like Windows Server 2012/ 2012 R2/ Windows 7/ 8 etc.
Thanks
Srikrishna

Installing SQL Server 2000 on Windows 2008 or later is not supported, but your question is about compatibility rather than support. SQL Server 2000 may work with the database engine but not with some other features and you'll probably need
to click through warnings installation. Proceed at your own risk if you want to go down that path.
I suggest you install on Windows 2003 for your migration testing to avoid obstacles. Not that support ends for Windows Server 2003 in a few months.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Cant create connection Pool for MS SQL Server 2000 with Microsoft Driver

i am using bea weblogic server 6.1, i cant create connection pool while using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft website. when
i give the following class name for JDBC driver and the connection url and click
apply while selecting the available server, a number of exception appears in default
server (that is the connection pool cannot be created..... cannot load the driver
class).
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple application in Jbuilder
7.0 the application runs successfully and fetches the data deom MS SQL database
but in at Bea connection Pool is not created with these settings. i do give appropriate
username and password in properties field in connection pool. Thankx for any help!

khabbab wrote:
That was the original code part from "startweblogic" :
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;
echo off
and i changed it to :
:runWebLogic
echo on
set PATH=.\bin;%PATH%
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;D:\Program Files\Microsoft
SQL Server 2000 Driver for JDBC\lib\msbase.jar;D:\Program Files\Microsoft SQL
Server 2000 Driver for JDBC\lib\msutil.jar;D:\Program Files\Microsoft SQL Server
2000 Driver for JDBC\lib\mssqlserver.jar;I suggest moving or copying the three ms driver jars to a directory that has no blanks
in it so the classpath doesn't have blanks in it. Ie:
go to the "D:\Program Files\Microsoft SQL Server 2000 Driver for JDBC\lib"
directory and do this:
mkdir D:\microsoft_jdbc_driver
cp *.jar D:\microsoft_jdbc_driver
Then make the classpath include D:\microsoft_jdbc_driver\msbase.jar etc.
Joe
>
>
echo off
when i save and run the bat file, server appears then disappears.
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
The class path which is echoed at server startup does not include thepaths to
driver jar files. when i edited the "startweblogic.bat" file and includedthe
driver class paths to jar files, now the server doesnot even run. tellme what
to do now???Show me what change you made to the startweblogic file.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
kindly tell me how can i check that the class paths for driver jarfiles are included
in that string? thanks. also tell me can not i use the jdriver forsql server
2000?.The startup script will echo what it's doing, including printing out
the classpath
it will use. Yes you can use the jDriver for MS SQL2000. It is sufficient
for
basic JDBC, but the MS drivfer is preferable in some ways.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
i am using bea weblogic server 6.1, i cant create connection
pool
while
using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft
website.
when
i give the following class name for JDBC driver and the connectionurl and click
apply while selecting the available server, a number of exception
appears
in default
server (that is the connection pool cannot be created..... cannot
load
the driver
class).The server startup script creates a string that will become the
classpath
for the server.
This string is part of the java call to start the server with a-classpath
argument. You need to
make sure the MS driver jars are part of that classpath string.
Joe
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple applicationin Jbuilder
7.0 the application runs successfully and fetches the data deom
MS
SQL database
but in at Bea connection Pool is not created with these settings.
i
do give appropriate
username and password in properties field in connection pool.
Thankx
for any help!
khabbab wrote:
The class path which is echoed at server startup does not include thepaths to
driver jar files. when i edited the "startweblogic.bat" file and includedthe
driver class paths to jar files, now the server doesnot even run. tellme what
to do now???
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
kindly tell me how can i check that the class paths for driver jarfiles are included
in that string? thanks. also tell me can not i use the jdriver forsql server
2000?.The startup script will echo what it's doing, including printing out
the classpath
it will use. Yes you can use the jDriver for MS SQL2000. It is sufficient
for
basic JDBC, but the MS drivfer is preferable in some ways.
Joe
Joseph Weinstein <[email protected]_this> wrote:
khabbab wrote:
i am using bea weblogic server 6.1, i cant create connection
pool
while
using MS
SQL Server 2000. i have installed JDBC Driver SAP1 from microsoft
website.
when
i give the following class name for JDBC driver and the connectionurl and click
apply while selecting the available server, a number of exception
appears
in default
server (that is the connection pool cannot be created..... cannot
load
the driver
class).The server startup script creates a string that will become the
classpath
for the server.
This string is part of the java call to start the server with a-classpath
argument. You need to
make sure the MS driver jars are part of that classpath string.
Joe
URL= jdbc:Microsoft:sqlserver://127.0.0.1:1433;DatabaseName=MyDB
Driver= com.microsoft.jdbc.sqlserver.SQLServerDriver
when i use the above setting in a JDBC simple applicationin Jbuilder
7.0 the application runs successfully and fetches the data deom
MS
SQL database
but in at Bea connection Pool is not created with these settings.
i
do give appropriate
username and password in properties field in connection pool.
Thankx
for any help!

How to connect MS SQL Server 2000 with JDeveloper 11g

Hi,
I am new to JDevleoper, Is it possible to connect MS SQL Server 2000 with JDeveloper 11g.
If possible can anyone help me in doing that?
waiting for ur reply...
Thanks in advance
Regards,
reddy

Shay or other knowledgeable folks,
Is there a way to utilize the wizard for "Business Tier > ADF Business Components > Business Components from Tables" for SQL Server 2000, 2005 or 2008. I can successfully execute sql via java programmatically or import a table from SQL Server with "Business Tier > ADF Business Components > Entity Object" wizard, but the Business Components from Tables simply doesn't see any tables under any schema. Without the "Business Components from Tables", i don't get the referential constraints imported into the application and to code all those from scratch is just not as elegant. So far i have only utilized the sql server jdbc driver from Microsoft (versions, 1.1, 1.2 and 2.0). Is there an alternative client that i need to use to enable selecting tables from that "Business Components from Tables" wizard. Is this a limitation of SQL Server, the jdbc driver or the wizard itself? Did anybody else experience the same issues? I am using Jdeveloper 11.1.1.0.1 against SQL Server 2005 (currently)
Thanks,
Andy

How to connect to SQL server 2000 with Oracle Form

Hi,
I'm looking for the document of how to connect "SQL Server 2000" with Oracle Form 6i. Anyone knows that?

Shay or other knowledgeable folks,
Is there a way to utilize the wizard for "Business Tier > ADF Business Components > Business Components from Tables" for SQL Server 2000, 2005 or 2008. I can successfully execute sql via java programmatically or import a table from SQL Server with "Business Tier > ADF Business Components > Entity Object" wizard, but the Business Components from Tables simply doesn't see any tables under any schema. Without the "Business Components from Tables", i don't get the referential constraints imported into the application and to code all those from scratch is just not as elegant. So far i have only utilized the sql server jdbc driver from Microsoft (versions, 1.1, 1.2 and 2.0). Is there an alternative client that i need to use to enable selecting tables from that "Business Components from Tables" wizard. Is this a limitation of SQL Server, the jdbc driver or the wizard itself? Did anybody else experience the same issues? I am using Jdeveloper 11.1.1.0.1 against SQL Server 2005 (currently)
Thanks,
Andy

SQL Server 2000\2005 compatibility with Active Directory 2012

Similar Messages

Maybe you are looking for