TS1901 Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
*** ??? I need to take out the data from a WD320 that shows this error and then format the WD and put the data into again
THANKS !!!

I'm sorry, is there a question here? You seem to know precisely what you need to do…

Similar Messages

  • After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

    After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it. See below for how to clone a drive.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
    Clone using Restore Option of Disk Utility
      1. Open Disk Utility.
      2. Select the destination volume from the left side list.
      3. Click on the Restore tab in the DU main window.
      4. Select the destination volume from the left side list and drag
           it to the Destination entry field.
      5. Select the source volume from the left side list and drag it to
          the Source entry field.
      6. Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

  • Error disk utility can't repair this disk...disk and restore your backed-up files

    I have been working on a project using an external hard disk. I used my Macbook Pro (2010)  to create this project and files (about 31 GB). Now I am trying to open the disk on my iMac (2014) and it doesn't show up. I can see the HDD when I use disk utility but get this message when I try to repair/restore the disc:
    "error disk utility can't repair this disk...disk and restore your backed-up files"
    The funny thing is that the disk works absolutely fine with my Macbook Pro. What am I missing?
    Imac :OSX 10.9.4 , 2.7 GHz Intel Core i5, 8 Gb Ram.

    Nico,
    Did you find a way?
    This just happened to me too.
    https://discussions.apple.com/thread/5981446
    -John

  • Can I fix a disk with this message?-Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Can I fix a disk with this message?
    Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

    Some problems can indeed be fixed this way. But working from Recovery_HD or Disk Warrior DVDs and working in the restricted environment those provide can be difficult. You can literally spend days working on this problem (while your regular work is unavailable) only to discover the old drive is unsalvageable.
    There is no way to know up front whether you are facing a major Hardware failure or a minor software glitch, or something in between. Often you are forced to work from the drive you no longer trust. I continue to recommend you do this work from a different, fully functioning Mac OS X booted from a different drive.
    If you have had the foresight to (as The hatter often recommends) clone your virgin install onto another drive for use in such situations, you will be able to recover from such problems in record time. If not, my previous recommendations stands:
    Buy a new Drive. Or  two. Install Mac OS X from scratch on a new drive, and get your Mac running again. Later, you can use the full power of Mac OS X to attempt to rescue your data, if needed. Then Zero the old drive, to see if it can hold data again reliably.
    If the old drive eventually provides some needed data, and is salvageable, Merry Christmas.

  • "Disk Utility can't repair this disk...and restore the backed up files"

    Hello, my macbook crashed a few days a go  as well and after going to the recovery drive and OX Utilities  tried to verify and repair disk it gives me this error "Disk Utility can't repair this disk...and restore the backed up files" is the second time that occurs after replacing the hard drive for a new SSD, i thought my problem was solved and is not. Any Ideas? the only other thing i can think of is the logic board?

    Backup your files and arrange for an appointment at an Apple store genius bar for a free evaluation.
    Ciao.

  • My computer is shutting down before fully booting up.  I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files.  Can anyone suggest what I should do next?

    My computer is shutting down before fully booting up.  I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files.  Can anyone suggest what I should do next?

    So, you can't Install OSX to the external?
    Or you can't boot from it when you do?
    You're not the only one wondering... I'm reminded of the Goose that laid the Golden Egg story.

  • Disk Utility can't repair this disk...disk, and restore your backuped-up file.

    Computer got uber slow.
    I started to worry.
    Now computer won't start.
    VERY worried.
    Tried to repair disk. Received error message above.
    Any help would be greatly appreciated.

    sulaver wrote:
    Computer got uber slow.
    I started to worry.
    Now computer won't start.
    VERY worried.
    Tried to repair disk. Received error message above.
    Any help would be greatly appreciated.
    You can't have received an error message "Disk Utility can't repair this disk...disk, and restore your backuped-up file." since that is pure gobbledegook and isn't even good English.
    What may have happened is that
    (a) your hard drive has become so full that the operating system can't find any space in which to.... operate.
    (b) as macjack says, it has crashed - possibly as a result of (a).
    (c) you have been allowing Time Machine to back up to your internal hard drive instead of to a backup disk, which has caused (a) to happen.

  • Disk Utility can't repair this disk

    I have been having trouble booting. It started when I connected a router to it. It seemed to eat up the free disk space and I only have 77 MB left or something around that.
    Anyway, I tried deleting files with command-s commands, and it worked one time and it freed up 2 GB of space. I restarted the computer and when I tried to start it up, it still got stuck in the gray screen with the whirly thing at the bottom. I checked the space and it was 77MB now.
    I decided to boot from the Install Disk (Snow Leopard 10.6.0).
    I checked Disk Utility first and verified the disk. It came up with the message:
    "Error: Disk Utility can't repair this disk .... disk, and restore your backed-up files."
    What should I do now?
    I have the Mac HD volume on backup already so I don't have to do the back up stage.
    Should I erase the disk while I am in Disk Utility?
    And format it to Mac OS Extended Journal?
    And then install the operating system again?
    Thanks.

    To answer your questions, first, some other options...
    If you fill your disk up that far, you are going to have problems. Don't ever do this, 10% is a bare minimum, you may need even more, depending on the size of your disc.
    I have seen before where a disc repair utility couldn't perform its function simply because there was not enough slack space available on the drive. While I have never seen this with disc utility, it is possible that the disc is repairable as-is, if you could just free up a couple more gigs of space first.
    Secondly, you could also try Disk Warrior, or to a lesser extent, Techtool Pro, or even iDefrag. I have personally never had Techtool Pro fix anything that Disk Utility or Disk Warrior couldn't fix, so I hesitate to even mention it, but I have had Disk Warrior and iDefrag clear up problems that Disk Utility either couldn't detect, or couldn't fix.
    If you are still in dire straits, you should re-partition the drive using disk utility. This is the safest route, then go from there.
    good luck!
    -a

  • Partition errors - "Disk Utility can't repair this disk"

    I partitioned my external 1TB WD HD into two drives (950GB + 50GB) using Disk Utility (OS X Mavericks 10.9.1). However the 950GB partition will no longer mount. It is recognised in Disk Utility, but grayed out. "Verify Disk" and "Repair Disk" in Disk Utility lead to the worrying error message "Disk Utility can't repair this disk."
    From the Disk Utility logs, the initial partition was successful:
    Partition 1:
    Name:  “Media Centre”
    Size: 948.13 GB
    File system: Mac OS Extended (Journaled)
    Do not erase contents
    Partition 2:
    Name:  “Media Centre 2”
    Size: 50.03 GB
    File system: Mac OS Extended (Journaled)
    Do not erase contents
    Mounting disk
    Partition complete
    Afterwards, I changed the name of the second partition “Media Centre 2” to "BOOTCAMP" (I was going to try to install Windows 7), but then changed my mind and tried to remove the second partition. At that point the log gives the error "Mount of “Media Centre” failed".
    Partition 1 ("Media Centre") now seems to be in limbo, stuck as 950GB, and "Verify Disk" and "Repair Disk" in Disk Utility lead to the worrying error message "Disk Utility can't repair this disk". Also in Disk Utility, Partition 1 ("Media Centre") now has the format classification "Mac OS Extended" rather than "Mac OS Extended (Journaled)".
    Any idea how I can get my hard drive to mount and get the data back?

    In  Disk Utility select the Top most entry on the left, the drive model and or manufacturer name and size entry, then click the Partition tab and Repartition it to your liking. If that fails the drive is bad.

  • Macbook pro won't boot and when I tried to back up the hard drive I got "disk utility can't repair this disk backup as many of your files as possible"

    My macbook pro froze and initially would not even recognize the power chord. Now it charges, but will not load up. I opened in in disk utility to try and back it up so that I could take it to apple to have it fixed but I got the message that said "disk utility can't repair this disk backup as many of your files as possible". How do I back up the files???

    Nichelle215,
    you can try the method described on this Apple page, in the “Instructions for backing up to an external hard disk via Disk Utility” section. (You can skip step 6, since you already know that your disk is irreparable.) Note, however, that this method is not guaranteed to work. Once you get your disk straightened out, you might consider purchasing an external hard disk for use as a Time Machine backup destination, so that a similar problem in the future won’t wipe out the only copy of your files.

  • Error: Disk Utility can't repair this disk.

    My Server's non-boot volume, while using Disk Utility I get the message Volume bitmap needs minor repair for orphaned blocks.  Then checking volume information.  Invalid volume file count.  It should be 472587 instead of 472588; Invalid bolume free block count.  It should be 236325120 instead of 236325119.  The volume was found corrupt and needs to be repaired.  Volume repair complete.  Updating boot support partitions for the volume required.  Error: Disk Utility can't repair this disk.
    I received this error a month ago and replaced the drive.  It worked fine for a month, but now I receive the same message.

    Did you restore from a time machine backup? If so, what i would suggest is doing an erase then reinstalling, do not restore from time machine during intail setup. Setup a fresh account then use migration assistant to restore from your backup.

  • Disk Utility stopped repairing the disk. I was instructed to backup as many of my files as possible.reformat the disk and store my backed files.  I am using an I Mac 2010.  I am not sure what caused this problem.   I use time machine

    Disk Utility stopped repairing the disk. I was instructed to backup as many of my files as possible.reformat the disk and restore my backed up files.  Since I use time machine, can I assume that all my files and programs can be restored from my recent back ups? 

    Hi jeromefrodia, 
    Welcome to the Apple Support Community!
    I understand that you are concerned about your data before reformatting the disk. Because you use Time Machine your information should be safe. Please refer to the attached article for information about what Time Machine backs up and how to restore from that backup. 
    Mac Basics: Time Machine backs up your Mac
    Cheers,
    Joe

  • Hi,  Had boot issue and got the following from DU repair function on Macintosh hd: updating boot support.....Error: Disk utility can't repair this disk.....reformat and restore backed up files. How is that done or do I go to Genius?

    In reference to question the computer gave no warning but lost internet connectivity.  I shut down for a while and when returned it would only boot to gray logo screen with spinning gear.  Ran disk utility and on Mac HD drive it stopped after "Updating boot support partitions as required". Then in red: Error: Disk utility can' repair this disk ....disk, and restore backed up files.   I'm running OS X 10.8 and had just updated the iOS about three days ago.  Not familiar with reformat process on MacBook Pro and would like some ideas whether I should go to the Genius Bar here in Sydney or try it on my own.   I have been using time machine to back up to a 1TB La Cie drive right up to the crash.   Thanks for any advice.

    Well it turned out the drive was shot.  Took it to the genius bar yesterday and they ran a test on the drive before trying the restore routine again.  Drive failed. 
    Replaced the drive and got the MBP back today.  Pretty quick and decent service once you get an appointment. 
    Now having trouble figuring how to do the Time Machine  saved files.  Have several applications which I'd like to keep but not sure how to trans the apps from my backup to the new.  Hunting for answers on that on the web.
    Thanks for you help, Eustace.

  • Disk utility can't repair this disk.... Is it still possible to back up my files?

    I was just on Word earlier and the mac crashed, I restarted it and it wouldn't load past the grey screen. I then used my install disc to go into disk utility, where it tried to verify and repair my Macintosh HD but failed to do both. I don't know what's cause this but more importantly I need to know where it's still possible to back up my files without having to purchase Disk Warrior. If I was to take it to the Apple store, what would they suggest?
    I don't know what my operating system is, I recently did a system update last week I believe if that means anything?
    Thanks for your time
    Luke

    Okay thanks Thomas Reed, it's a shame this has happened. It was so sudden...one minute I'm typing on word, the next minute it's broke beyond repair?
    It's peculiar how it says Disk Ultility can't repair the drive but to try and back up your files...when it's actually impossible to do so without any software. I'm assuming things like creating a new image etc. won't help at all.
    I'm hoping the Apple Store people will be able to help me out, I've heard DiskWarrior is good so I may check that out.

  • Disk Utility can't repair this disk (TimeMachine)

    15" rMBP Early 2013 (2.6Ghz, 16GB.  Mavericks installed as an update. SSD I am not encrypting my 500GB SSD HDD.
    I have a WD 1 TB USB 3.0 external drive that I have partitioned half exFAT for shared storage and on  the other side I use Time Machine Mac OS Extended.  The other week I backed up and then dismounted the drive (or so I thought), it turned out that the drive didn't dismount and I just unplugged it.  I saw an error that it was unplugged.  I checked the drive's extFAT and saw that I had everything on that side but didn't try the TM machine side until tonight.
    The TM partition won't mount.  I ran Disk Utility after Command R boot based on what Onyx recommended and fixed issues that I never ran into before on my boot drive.
    Now I can not unmount the USB drive once I plug it in and the TM partitioned is seen but not read.  No details in Disk Utility and is grayed out.  
    Is my TM trashed?  Is there anything I can try to repair that partition or do I lose all my TM back ups from the past year?  It is mostly full and was removing the earlier backups from January.
    Wait a sec, as I am typing this on my desktop,  I tried to Verify the TM partition a 3rd time via Disk Utility.  This time is said everything was ok and then the details popped up.  It went from preparing backup to cleaning up backups. (I hope it isn't removing everything) .  I am going to let it takes its time to see
    It seems to be rising from the dead!  Not having ran into this problem before, I have to know if this is something people have ran into with USB external drives before with TM?  Looks like I need to find a 2nd medium for backups. 

    If you are using any Western Digital software such as "SmartWare" or "Drive Utility" or similarly categorized utilities, uninstall it. Such utilities are not required, and have been known to corrupt hard disk drive data or cause other trouble.
    Having said that Western Digital hard disk drives have been causing trouble for many users after upgrading to Mavericks. I have not personally experienced that with any WD drives but it appears to be a popular complaint on this site.
    This thread began immediately upon Mavericks' public release and continues to this day: Mavericks corrupts external hard drive
    Looks like I need to find a 2nd medium for backups.
    I certainly advocate having more than one backup, preferably using different backup methods, and preferably devices from different manufacturers, to preclude corruption or loss resulting from any single factor.

Maybe you are looking for

  • Sync - Async Bridge problem

    hi all, is the first time i use this BPM my scenario is simple. i have a ws ho send a interface ID, a java mapping that read flat file, convert into xml and send the response. this XML is save in drive. this file is picked by a file adapter and send

  • Recording from external sound device not worki

    Hello everyone, I have a SB Li've! 24-bit card and am trying to record some LPs from a turntable connected to a receiver and from the receiver is connected to my Line In/Mic In (jack #) on my SB card. I am able to playback out of my computer speakers

  • White screen only

    Hi everyone, I have done this several dozen times, but now it is failing and i need some additional eyes to see if there is a problem with what I am doing. Outline is this... appDelegate has a view controller, this view controller has one additional

  • Album Covers Not Appearing

    Some of the albums I have loaded on my iPhone are not displaying the cover art...they are black. Any ideas on how to resolve? Thanks.

  • Problems with D-Bus

    Hello, each time I make a "/etc/rc.d/dbus restart" I have the same error message : Unknown username "named" in message bus configuration file How can I fix it? thank's for your help