SQL Server Express 2008 R2 - Connect to Server Error
I have recently downloaded and installed SQL Server 2008 R2 on a new laptop (Windows 7). The install completed successfully and I encountered no issues. However, when I start SQL Server Management Studio, I am unable to connect to my server instance.
I receive the following error:
"Cannot connect to DWHS (my server name)" "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and
that SQL Server is configured to allow remote connections.
Did I incorrectly setup some of the settings regarding how the instance is configured when I installed? Any help would be appreciated.
are you giving the right server name ?check wether sql services are running and make sure that you are giving correct name . I hope you have installed sql server database engine .
How to find server name:
If the instance of SQL Server is a default instance (the instance name is MSSQLSERVER), the server name is
Computer. Or if it is a named instance, the server name is ComputerName\InstanceName. You can find the instance name via SQL Server Configuration Manager:
Open SQL Server Configuration Manager from Start -> All Programs -> Microsoft SQL Server 2008 -> Configuration Tools, click SQL
Server Services in the SQL Server Configuration Manager, in the right pane, you can find SQL Server (InstanceName).
CompterName and InstanceName are placeholders which represent the your computer name and the instance name of the SQL Server instance.
Thanks,Suhas V
Similar Messages
-
Hi,
I have a windows 2008 R2 Enterprise servers with standalone MS-SQL 2008 R2 named instance. The server is having two networks, once production and the second for backup. The server FQDN is resolving to the production IP. The backup NIC
DNS dynamic update is disabled and an "A" record is registered with the dns. While trying to connect to the instance using the management studio:
Successfuly able to connect using the instance name, the production hostname, production IP and backup IP.
but while trying to connect to the insance using the backup hostname getting the below error:
"Login failed. The login is an untrusted domain and cannot be used with windows authentication. (Microsoft SQL server, Error: 18452) "
This is required for the backup tool to get connected using the backup FQDN of the server.
Should I need to create a host name alias, request you to kindly assist me with the best recommedation to fix this.
http://blogs.msdn.com/b/dbrowne/archive/2012/05/21/how-to-add-a-hostname-alias-for-a-sql-server-instance.aspxHi,
It might be a kerberos issue. Check that there are valid SPN's registered using the setspn utility - http://technet.microsoft.com/en-us/library/cc731241.aspx
Thanks, Andrew
My blog... -
HI Connection failed: SQLState: '08001' SQL Server Error:
Hi all,
my server in workgroup and all client pc in domain is any cooneting issue
Operating server - Window Server 2008
Database - Sql server 2005
SAP - sap 2007B pl 08
but when i connect client to the server i getting error:
Connection failed: SQLState: '08001' SQL Server Error: 17 [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
so please tell me if any setting that will change to established coonetion.
Regards \
RajPlease check if the named pipes and tcp/ip are enabled in client protocols and protocols for ms-sql server. You can do so by going to sql server configuration manager.
Rahul -
Help,
setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine. When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
i get the following error:
Connection failed:
SQLState:'01000'
SQL Server Error:67
[Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
(Connect()).
Connection failed:
SQLState:'08001'
SQL Server Error:17
[Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled. I can connect to the other sql server in studio manager on the new machine however, i can't go do
the same in the old server, says:
cannot connect to hbfsqlpro1\hbfsqlpro1
Additonal information a network related or instance specifc error occured while establising a connection to SQL server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL server is configured to
allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine. STarting to pull my hair out somewhat, i'm sure it's something really simple!Hello,
You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
Make sure TCP/IP is enabled.
http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hi All,
we are facing the Login fails issue .
how to resolve the bellow error , could you please suggested the possible ways .. ASAP
TITLE: Connect to Server
Cannot connect to ..
ADDITIONAL INFORMATION:
Login failed for user ' domain\name'. (Microsoft SQL Server, Error: 18456)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
BUTTONS:
OK
Log Name: Application
Source: MSSQLSERVER
Date: 10/6/2011 1:56:28 PM
Event ID: 18456
Task Category: Logon
Level: Information
Keywords: Classic,Audit Failure
User: domain\name
Computer:
Description:
Login failed for user ' domain\name'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>]
RAMI was hitting myself in the head with this problem for a couple of minutes.... Everything was fine on the DC and Domain itself.. I added the Domain admins Group Principal for which I am part of... I was getting this error ... Long History... Short
(Right Click and Run as Administrator took care of this for me..) UAC was the cause of the problem.
Cannot connect to XX-DB-XX3.
===================================
Login failed for user 'XXXXS\XXas'. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
Server Name: XX-DB-XX3
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() -
Location: bcpimp.cpp:1797
Expression: cbOutTemp < cbOutputStr
SPID: 52
Process ID: 2364
Msg 3624, Level 20, State 1, Line 3
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.If you check your sql server error log folder you will see dump files created. You need to send those dump files to Microsoft for inspection because outside of microsoft product support the symbols for reading the dumps are not available without which it
wont be easy to find the issue.
http://support.microsoft.com/kb/2028589
In the meantime check if you are on the latest version of Service Pack and if not apply the latest service pack. Majority of these kind of assertions are bugs which are solved in Service Packs/Cumulative Updates.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
HI
I have a problem. I can't connect to the database. It said :
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 121)
When I restart the server, I can connect normally. But after 1-2 days, it can't be connected.
How can I fix this?Hi Lee,
Please refer to the following article to configure SQL Server 2005 to allow remote connections:
http://support.microsoft.com/kb/914277/en-us
Regards,
Elvis Long
TechNet Community Support -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have a SQL Server connected intro a Windows Server 2003 Domain Active Directory, the server holds a default instance with a single Database, the SQL Server is 2005 Std Edition, and is using mix mode Authentification, then I able to create SQL Native Users
and Invoque Windows Domain Users also.
The Goal of this project is remove the sysadmin Server role for all the Windows Domain Users, to give then a more granular secure model but at the moment is this only way to connect at the Data Base Server.
I already create Native SQL Servers users without any problem!, they respect Securable Setting, Server Roles, User Mapping, everything...Just when I create a Login Profile form a Domain Users and apply the same setting, I get this error...
The SELECT permissions was denied on the object 'extended_properties', database 'mssqlsystemresource', schema 'sys'.(Microsoft SQL Server, Error:229)
But if the user have sysadmin Server Rol he can sing over the server without any issue, I review the .sys view extended_properties and "Public" is the only Database Role placed.
Any Idea if I need change any Setting in the Secure in SQL Master DataBase? or which is the issue witjh this matter?
Thank in advance for your help!Since there are so many possibilities for what might be wrong. Here's another possibility to look at. I ran into something where I had set up my own roles on a database. (For instance, "Administrator", "Manager", "DataEntry",
"Customer", each with their own kinds of limitations) The only ones who could use it were "Manager" role or above--because they were also set up as sysadmin because they were adding users to the database (and they were highly trusted).
Also, the users that were being added were Windows Domain users--using their domain credentials. (Everyone with access to the database had to be on our domain, but not everyone on the domain had access to the database--and only a few of them had access
to change it.)
Anyway, this working system suddenly stopped working and I was getting error messages similar to the above. What I ended up doing that solved it was to go through all the permissions for the "public" role in that database and add those permissions
to all of the roles that I had created. I know that everyone is supposed to be in the "public" role even though you can't add them (or rather, you can "add" them, but they won't "stay added").
So, in "SQL Server Management Studio", I went into my application's database, in other words (my localized names are obscured within <> brackets): "<Computername> (SQL Server <version> - sa)"\Databases\<MyAppDB>\Security\Roles\Database
Roles\public". Right-click on "public" and select "Properties". In the "Database Role Properties - public" dialog, select the "Securables" page. Go through the list and for each element in the
list, come up with an SQL "Grant" statement to grant exactly that permission to another role. So, for instance, there is a scalar function "[dbo].[fn_diagramobjects]" on which the "public" role has "Execute" privilege.
So, I added the following line:
EXEC ( 'GRANT EXECUTE ON [dbo].[fn_diagramobjects] TO [' + @RoleName + '];' )
Once I had done this for all the elements in the "Securables" list, I wrapped that up in a while loop on a cursor selecting through all the roles in my roles table. This explicitly granted all the permissions of the "public" role to
my database roles. At that point, all my users were working again (even after I removed their "sysadmin" access--done as a temporary measure while I figured out what happened.)
I'm sure there's a better (more elegant) way to do this by doing some kind of a query on the database objects and selecting on the public role, but after about half and hour of investigating, I wasn't figuring it out, so I just did it the brute-force method.
In case it helps someone else, here's my code.
CREATE PROCEDURE [dbo].[GrantAccess]
AS
DECLARE @AppRoleName AS sysname
DECLARE AppRoleCursor CURSOR LOCAL SCROLL_LOCKS FOR
SELECT AppRoleName FROM [dbo].[RoleList];
OPEN AppRoleCursor
FETCH NEXT FROM AppRoleCursor INTO @AppRoleName
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC ( 'GRANT EXECUTE ON [dbo].[fn_diagramobjects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_alterdiagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_creatediagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_dropdiagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_helpdiagramdefinition] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_helpdiagrams] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_renamediagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_objects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_sql_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_views] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[allocation_units] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assemblies] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_files] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_references] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[asymmetric_keys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[certificates] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[change_tracking_tables] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[check_constraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[column_type_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[column_xml_schema_collection_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[computed_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[conversation_endpoints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[conversation_groups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[conversation_priorities] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[crypt_properties] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[data_spaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_audit_specification_details] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_audit_specifications] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_files] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_permissions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_principal_aliases] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_principals] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_role_members] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[default_constraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[destination_data_spaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[event_notifications] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[events] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[extended_procedures] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[extended_properties] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[filegroups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[foreign_key_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[foreign_keys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_catalogs] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_index_catalog_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_index_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_index_fragments] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_stoplists] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_stopwords] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[function_order_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[identity_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[index_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[internal_tables] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[key_constraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[key_encryptions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[message_type_xml_schema_collection_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[module_assembly_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[numbered_procedure_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[numbered_procedures] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[objects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[parameter_type_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[parameter_xml_schema_collection_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_functions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_range_values] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_schemes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partitions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[plan_guides] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[procedures] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[remote_service_bindings] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[routes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[schemas] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_contract_message_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_contract_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_contracts] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_message_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_queue_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_queues] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[services] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[spatial_index_tessellations] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[spatial_indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sql_dependencies] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sql_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[stats] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[stats_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[symmetric_keys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[synonyms] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[syscolumns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[syscomments] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysconstraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysdepends] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysfilegroups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysfiles] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysforeignkeys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysfulltextcatalogs] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysindexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysindexkeys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysmembers] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysobjects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[syspermissions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysprotects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysreferences] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_objects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_sql_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_views] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[systypes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysusers] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[table_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[tables] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[transmission_queue] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[trigger_events] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[triggers] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[type_assembly_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[views] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_attributes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_collections] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_component_placements] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_components] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_elements] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_facets] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_model_groups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_namespaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_wildcard_namespaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_wildcards] TO [' + @AppRoleName + '];' )
FETCH NEXT FROM AppRoleCursor INTO @AppRoleName
END
CLOSE AppRoleCursor
RETURN 0
GO
Once that is in the system, I just needed to "Exec GrantAccess" to make it work. (Of course, I have a table [RoleList] which contains a "AppRoleName" field that contains the names of the database roles.)
So, the mystery remains: why did all my users lose their "public" role and why could I not give it back to them? Was this part of an update to SQL Server 2008 R2? Was it because I ran another script to delete each user and add them back
so to refresh their connection with the domain? Well, this solves the issue for now.
One last warning: you probably should check the "public" role on your system before running this to make sure there isn't something missing or wrong, here. It's always possible something is different about your system.
Hope this helps someone else. -
I have created a user and given him the owner rights for the database. Though I can LogIn as the user, I cannot access the databases. I am having the error mesage:
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The SELECT permission was denied on the object 'extended_properties', database 'mssqlsystemresource', schema 'sys'. (Microsoft SQL Server, Error: 229)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=229&LinkId=20476
Sha_woopSince there are so many possibilities for what might be wrong. Here's another possibility to look at. I ran into something where I had set up my own roles on a database. (For instance, "Administrator", "Manager", "DataEntry", "Customer",
each with their own kinds of limitations) The only ones who could use it were "Manager" role or above--because they were also set up as sysadmin because they were adding users to the database (and they were highly trusted). Also, the users that
were being added were Windows Domain users--using their domain credentials. (Everyone with access to the database had to be on our domain, but not everyone on the domain had access to the database--and only a few of them had access to change it.)
Anyway, this working system suddenly stopped working and I was getting error messages similar to the above. What I ended up doing that solved it was to go through all the permissions for the "public" role in that database and add those permissions to
all of the roles that I had created. I know that everyone is supposed to be in the "public" role even though you can't add them (or rather, you can "add" them, but they won't "stay added").
So, in "SQL Server Management Studio", I went into my application's database, in other words (my localized names are obscured within <> brackets): "<Computername> (SQL Server <version> - sa)"\Databases\<MyAppDB>\Security\Roles\Database
Roles\public". Right-click on "public" and select "Properties". In the "Database Role Properties - public" dialog, select the "Securables" page. Go through the list and for each element in the list, come up with an SQL "Grant" statement to
grant exactly that permission to another role. So, for instance, there is a scalar function "[dbo].[fn_diagramobjects]" on which the "public" role has "Execute" privilege. So, I added the following line:
EXEC ( 'GRANT EXECUTE ON [dbo].[fn_diagramobjects] TO [' + @RoleName + '];' )
Once I had done this for all the elements in the "Securables" list, I wrapped that up in a while loop on a cursor selecting through all the roles in my roles table. This explicitly granted all the permissions of the "public" role to my database roles.
At that point, all my users were working again (even after I removed their "sysadmin" access--done as a temporary measure while I figured out what happened.)
I'm sure there's a better (more elegant) way to do this by doing some kind of a query on the database objects and selecting on the public role, but after about half and hour of investigating, I wasn't figuring it out, so I just did it the brute-force method.
In case it helps someone else, here's my code.
CREATE PROCEDURE [dbo].[GrantAccess]
AS
DECLARE @AppRoleName AS sysname
DECLARE AppRoleCursor CURSOR LOCAL SCROLL_LOCKS FOR
SELECT AppRoleName FROM [dbo].[RoleList];
OPEN AppRoleCursor
FETCH NEXT FROM AppRoleCursor INTO @AppRoleName
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC ( 'GRANT EXECUTE ON [dbo].[fn_diagramobjects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_alterdiagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_creatediagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_dropdiagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_helpdiagramdefinition] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_helpdiagrams] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT EXECUTE ON [dbo].[sp_renamediagram] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_objects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_sql_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[all_views] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[allocation_units] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assemblies] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_files] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_references] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[assembly_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[asymmetric_keys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[certificates] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[change_tracking_tables] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[check_constraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[column_type_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[column_xml_schema_collection_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[computed_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[conversation_endpoints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[conversation_groups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[conversation_priorities] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[crypt_properties] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[data_spaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_audit_specification_details] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_audit_specifications] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_files] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_permissions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_principal_aliases] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_principals] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[database_role_members] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[default_constraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[destination_data_spaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[event_notifications] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[events] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[extended_procedures] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[extended_properties] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[filegroups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[foreign_key_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[foreign_keys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_catalogs] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_index_catalog_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_index_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_index_fragments] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_stoplists] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[fulltext_stopwords] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[function_order_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[identity_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[index_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[internal_tables] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[key_constraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[key_encryptions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[message_type_xml_schema_collection_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[module_assembly_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[numbered_procedure_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[numbered_procedures] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[objects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[parameter_type_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[parameter_xml_schema_collection_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_functions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_range_values] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partition_schemes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[partitions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[plan_guides] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[procedures] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[remote_service_bindings] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[routes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[schemas] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_contract_message_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_contract_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_contracts] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_message_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_queue_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[service_queues] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[services] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[spatial_index_tessellations] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[spatial_indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sql_dependencies] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sql_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[stats] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[stats_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[symmetric_keys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[synonyms] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[syscolumns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[syscomments] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysconstraints] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysdepends] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysfilegroups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysfiles] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysforeignkeys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysfulltextcatalogs] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysindexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysindexkeys] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysmembers] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysobjects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[syspermissions] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysprotects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysreferences] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_columns] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_objects] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_parameters] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_sql_modules] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[system_views] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[systypes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[sysusers] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[table_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[tables] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[transmission_queue] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[trigger_events] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[triggers] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[type_assembly_usages] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[views] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_indexes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_attributes] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_collections] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_component_placements] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_components] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_elements] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_facets] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_model_groups] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_namespaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_types] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_wildcard_namespaces] TO [' + @AppRoleName + '];' )
EXEC ( 'GRANT SELECT ON [sys].[xml_schema_wildcards] TO [' + @AppRoleName + '];' )
FETCH NEXT FROM AppRoleCursor INTO @AppRoleName
END
CLOSE AppRoleCursor
RETURN 0
GO
Once that is in the system, I just needed to "Exec GrantAccess" to make it work. (Of course, I have a table [RoleList] which contains a "AppRoleName" field that contains the names of the database roles.)
So, the mystery remains: why did all my users lose their "public" role and why could I not give it back to them? Was this part of an update to SQL Server 2008 R2? Was it because I ran another script to delete each user and add them back so to refresh
their connection with the domain? Well, this solves the issue for now.
One last warning: you probably should check the "public" role on your system before running this to make sure there isn't something missing or wrong, here. It's always possible something is different about your system.
Hope this helps someone else. -
Hi,
As I am going to configure Database Mirroring in sql server 2008 R2. It is giving error 1418.
The server network address "TCP://xyzserver.domain.con:5022" can not reached or does not exist. Check network address name and that the ports for the local and remote endpoints sre operational.(Microsoft SQL Server, Error: 1418)
I have tried the below steps:
1. ALTER ENDPOINT Mirroring FOR DATA_MIRRORING (ROLE = PARTNER, ENCRYPTION = SUPPORTED)
2. ALTER DATABASE PROD_DB SET PARTNER = 'TCP://xyzserver.domain.Com:5022'
3. DROP ENDPOINT Mirroring
SELECT *
FROM sys.endpoints
4. CREATE ENDPOINT Mirroring
STATE = STARTED
AS TCP ( LISTENER_PORT = 60801 )
FOR DATABASE_MIRRORING (
AUTHENTICATION = WINDOWS KERBEROS,
ENCRYPTION = SUPPORTED,
ROLE=ALL);
SELECT state ,state_desc FROM sys.database_mirroring_endpoints
3. GRANT CONNECT ON ENDPOINT::Mirroring TO ALL
4. GRANT CONNECT ON ENDPOINT::Mirroring TO SA
WITH GRANT OPTION;
GO
I have tried all above the steps. But still I can not resolve the issue.
Can anyboby help me?
Sachin JainPlease check below points
Make sure that the mirror database is ready for mirroring.
Make sure that the name and port of the mirror server instance are correct.
Make sure that the destination mirror server instance is not behind a firewall.
Make sure that the principal server instance is not behind a firewall.
Verify that the endpoints are started on the partners by using the state or state_desc column the of the sys.database_mirroring_endpoints catalog view. If either endpoint is not started, execute an ALTER ENDPOINT statement to start it.
To identify the listening ports and the processes that have those ports opened, follow these steps:
Obtain the process ID.
To learn the process ID of an instance of SQL Server, connect to that instance and use the following Transact-SQL statement:
SELECT SERVERPROPERTY('ProcessID')
Match the process ID with the output of the following netstat command:
netstat -ano
also please check local host file are set-up correctly ipaddress and hostnames for (principal, mirror and witness)
http://uk.linkedin.com/in/ramjaddu -
Hi,
I have a stored procedure with the code below that is behaving strangely.
I'm using
SQL Server 2008 R2 with Visual Studio 2010 When I open SQL within Visual Studio and insert the query below, and I click the "Verify SQL Syntax" button, I get two messages.:
1st - The SQL syntax has been verified against data source.
2nd - The Following Errors were encountered while parsing the contents of the SQL pane:
The OVER SQL construct or statement is not supported.
How do I fix this error?
I run in the Visual Studio 2010 IDE and the result is displayed without errors.
The first time I run the web page that consumes the stored procedure, sometimes the result is displayed, also without error.
The second time on, I always get the message SQL Server Error 4145.
Can anyone help me?
SELECT *
FROM (
SELECT ROW_NUMBER() OVER (ORDER BY Livros.LivroTitulo ASC) AS row,
Livros.LivroId,
Livros.LivroLojistaId,
Livros.LivroStatusId,
Livros.LivroMarcaId,
Livros.LivroAutorId,
Livros.LivroTitulo,
Livros.LivroSubtitulo,
Livros.LivroISBN13,
Livros.LivroEAN13,
Livros.LivroIdiomaId,
Livros.LivroEstadoId,
Livros.LivroAcabamentoId,
Livros.LivroNumeroEdicao,
Livros.LivroAnoPublicacao,
Livros.LivroNumeroPaginas,
Livros.LivroPrecoCusto,
Livros.LivroPrecoCapa,
Livros.LivroAliquotaIPI,
Livros.LivroAliquotaICMS,
Livros.LivroPeso,
Livros.LivroAltura,
Livros.LivroLargura,
Livros.LivroImagemCapa,
Livros.LivroResenha,
Livros.LivroCriadoPorUsuarioId,
Livros.LivroDataCadastro,
Marcas.MarcaNome AS Editora,
LivrosAutores.LivroAutorLivroId,
Autores.AutorId,
Autores.AutorNome AS Autor
FROM Livros
INNER JOIN Marcas ON Marcas.MarcaId = Livros.LivroMarcaId
INNER JOIN LivrosAutores ON LivrosAutores.LivroAutorLivroId = Livros.LivroId AND LivrosAutores.LivroAutorAutorId = Livros.LivroAutorId
INNER JOIN Autores ON Autores.AutorId = LivrosAutores.LivroAutorAutorId
WHERE
Livros.LivroTitulo LIKE 'só%') AS TabelaSQL Database Recovery software is the best and powerful software. This software repair damaged or corrupt SQL databases. The software can repair both the MDF and NDF SQL database files. For more information and free download click http://sqldatabserecovery.weebly.com/
and http://sqldatabserecovery.weebly.com/recovery-for-sql.html -
SQL server error log size is too big to handle
I am working with a large database on windows sql server 2008 R2 such that it has to run continuously 24x7 because of that it is not possible
to restart the server time to time. It is kind of monitoring system for big machines. Because of this SQL server error logs are growing too big even some times up to 60-70 GB at a limited sized hard drive. I can't delete them time to time manually. Can someone
please suggest a way using which I can stop creation of such error logs or recycle them after sometime. Most of the errors are of this kind --
Setting database option RECOVERY to simple for database db_name
P.S.- I have read limiting error logs to 6 etc. But that didn't help. It will be best if you could suggest some method to disable these logs.Hi Mohit11,
According to your description, your SQL Server error logs are growing too big to handle at a limited sized hard drive, and you want to know how to stop the generation of such error logs or recycle them after sometime automatically without restarting the
SQL Server, right?
As others mentioned above, we may not be able to disable SQL server error log generation. However we can recycle the error logs automatically by running the
sp_cycle_errorlog on a fixed schedule (i.e. every two weeks) using SQL agent jobs so that the error logs will be recycled
automatically without restarting SQL Server.
And it is also very important for us to keep the error log files more readable. So we can increase the number of error logs a little more and run the sp_cycle_errorlog more frequently (i.e. daily), then each file will in a smaller size to be more readable
and we can recycle the log files automatically.
In addition, in order to avoid the size of all the log files growing into a too big size unexpected (sometime it may happen), we can run the following query in SQL Agent job to automatically delete all the old log files when the size of log files is larger
than some value we want to keep (i.e. 30GB):
--create a tample table to gather the information of error log files
CREATE TABLE #ErrorLog
Archieve INT,
Dt DATETIME,
FileSize INT
GO
INSERT INTO #ErrorLog
EXEC xp_enumerrorlogs
GO
--delete all the old log files if the size of all the log files is larger than 30GB
DECLARE @i int = 1;
DECLARE @Log_number int;
DECLARE @Log_Max_Size int = 30*1024; --here is the max size (M) of all the error log files we want to keep, change the value according to your requirement
DECLARE @SQLSTR VARCHAR(1000);
SET @Log_number = (SELECT COUNT(*) FROM #ErrorLog);
IF (SELECT COUNT(FileSize/1024/1024) FROM #ErrorLog) >= @Log_Max_Size
BEGIN
WHILE @i <= @Log_number
BEGIN
SET @SQLSTR = 'DEL C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG.' + CONVERT(VARCHAR,@i);
EXEC xp_cmdshell @SQLSTR;
SET @i =@i + 1;
END
END
DROP TABLE #ErrorLog
For more information about How to manage the SQL Server error log, please refer to the following article:
http://support.microsoft.com/kb/2199578
If you have any question, please feel free to let me know.
Regards,
Jerry Li -
Error Deleting publication Microsoft SQL Server, Error: 15517
I have a MSSQL 2008 on a windows 2008 server.
I cant delete a publication that isnt in use anymore i get the following error.
TITLE: Microsoft SQL Server Management Studio
Could not delete publication 'TASS Publication'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.0.1600.22&EvtSrc=Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.Replication.ReplicationMenuItem&EvtID=CantDeletePublication&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated, or you do not have permission.
Changed database context to 'tass'. (Microsoft SQL Server, Error: 15517)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.00.2531&EvtSrc=MSSQLServer&EvtID=15517&LinkId=20476
BUTTONS:
OK
I have tried to delete it by right clicking and delete. I have tried by query.
exec
sp_removedbreplication
N'<sqlServerName>'
exec
sp_droppublication @publication
= N'<sqlServerName>'
I have looked at many forums.
I am trying to do this as 'sa'.
Do you have any suggestions?johnyvee,
Firstly, exec sp_removedbreplication should be corrected in your msg above to have the parameter of 'databasename' instead of 'sqlservername' same for the droppublciation procedure, it must be passed the publication name and not the servername.
Secondly, go to the properties of 'TASS' database and under Files make sure you have an owner specified, specify sa for example. -
Intermittent Error SQL Server Error 67 and 17
Hi! We are running Windows SQL Server 2012 Standard on Windows Server 2012. There is a SQL Database with an Access Front End which we migrated from older versions of Access and SQL.
The Access front end communicates with the database most of the time without a problem. However, sometimes Access just stops responding and then the user gets the following error:
Connection failed:
SQLState: '01000'
SQL Server Error: 67
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen(Connect()).
Connection Failed:
SQLState: '08001'
SQL Server Error: 17
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access is denied.
The person who maintains the Access and the SQL Databases provided the following summary:
The spontaneous issue affects everyone connected to the SQL Server at the same time, and manifests itself in a slow or non-existent connection. It resolves itself in a few minutes to a few hours. The ODBC trace did not yield any useful information
about the problem. We tested with up to 5 simultaneous users with no problem. When we observed the issue of Friday, only four users were in the database, and closing these connections did not immediately resolve the issue. There appeared
to be no problems with the network for file system access to the server during the down time.
Based on this information, it definitely is not an issue with MS Access, the ODBC configuration, or the database structure. It appears to be an intermittent connectivity issue with SQL Server itself, perhaps due to configuration problems, licensing
(as you mentioned), conflicts with other software/processes, or due to some other SQL Server process. Unfortunately, this is outside of my expertise and we do not have dedicated SQL Server or IT resources.
I had another IT Person look at the issue, he found the following:
Sally's PC was getting SQL error.<o:p></o:p>
Logged into her PC to look at it (logged in as Sally and as cleAdmin)<o:p></o:p>
Looked at server name, want to verify that in the Control Panel > Adminstratrative Tools > ODBC Connections<o:p></o:p>
There was no odbc connections under User DSN, System DSN or Fie DSN<o:p></o:p>
Created new System DSN connection<o:p></o:p>
Specified server: CLE-VM-SQL-FILE\CLESQLSERVER<o:p></o:p>
The rest were default values<o:p></o:p>
Clicked test and it was successful<o:p></o:p>
Unfortunately, the problem started again soon after these changes were made.
It was suggested there could be a hardware issue, so we have replaced the switch and made sure the drivers on the Network Adapters are current. Plus
we have never seen any indication of a loss of network connectivity while testing using a PING Test.
Has anyone else experienced this issue and if so, how did you solve it?
Patricia KacherskyBump, Anyone?
Patricia Kachersky -
Team Foundation Error (TF246021) - SQL Server Error: 2601
Hello, we are using VS 2010 Premium and we are having difficulty queueing builds. We are right-clicking on the "Builds" node under our project and selecting "Queue New Build...". The Queue Build window appears, a valid build
controller is selected, and when we click the Queue button we receive the following error:
Microsoft Visual Studio
Team Foundation Error
TF246021: An error occurred while processing your request. Technical information (for administrator): SQL Server Error: 2601
If anyone can help us out with this it would be GREATLY appreciated :)Hi Bruce,
Thanks for your post.
You’re using TFS 2010 SP1?
Except this queue build definition issue, all other TFS features(source control, work item tracking…) work fine in your TFS Server?
If another user try to queue build definition from his client using VS, will receive the same error?
On your TFS Server machine, open SQL Server Management Studio and try connect to your TFS 2010’s SQL Server, ensure SQL Server can be connected successfully from TFS Server machine.
Additionally, you can execute TFS Power Tools BPA to scan the installation of your TFS 2010 Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Oracle Application Server 10.1.3.3.0 OC4J Restarting
Oracle ADF application is deployed to the AS from JDeveolper 10.1.3.3.0 and runs fine initially but after continual use the OC4J returns a runtime exception and restarts. 1. This instance is not associated with an infrastructure but it is on a server
-
Hello I am really not sure where to begin. I am creating a portfolio DVD for my employer. I am using flash to design the interface. I create buttons that link to videos within the flash file. WHen I publish as a windows projectior and play the exe fi
-
I've installed the UCS management pack for Microsoft SCOM 2007 R2. It appears to be working, however I now keep seeing all computers that have the SCOM agent installed trying to run the cisco.ucs.computer.probeaction.vbs script, which fails and gener
-
Dear Gurus, I had followed the below steps in creating webservices using ABAP. 1. Create Package 2. Create Function group 3. Create RFC function module 4. Create webservice from the function module 5. Create service definition, select port profie and
-
Hi , My user is attaching document on IMA11 tcode .When i am viewing some of the documents gets corrupted .please kindly let me know your assitance in this issue . Regards, veera