SQL Server Setup Error
Good Evening,
I've been having an issue today whilst trying to install SQL Server 2012 to a newly built server running Windows Server 2012 R2. Whilst going through the 'Database Engine Configuration' where you assign parts of the installation to different directories.
We are trying a new method of installing each part of SQL to an SMB file share on our Netapp. After pointing each part of installation to a specific directory and pressing next I receive the error attached
I can see that it says that you need to give the SQL Server setup account the Manage Auditing and Security Log policy on the local policy console. I've gone to this policy and added myself (Local Administrator), The server itself, the SQL Server
Agent account and also the database engine account. I have rebooted the server and tried again running the installation both as myself and Administrator but still get the same error. Please could someone help me with this issue.
Regards,
Hello,
Please read the following article.
http://msdn.microsoft.com/en-us/library/hh759341.aspx
Please review security and operating system considerations.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Similar Messages
-
Hi Team,
Earlier i had SQL Server 2008 R2 on my Machine. For one work around i unistall SQL Server 2008 R2 and Trying to install SQL Server 2008 but i am not able to install with below error:
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
Method not found: 'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()'..
ThanksHi Lydia,
i have followed the above step and i am able to proceed further but while installation i am getting the below error consistently.
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:
Locating the SQL Server Browser service component failed with Windows Installer return code '2'. The component ID: '{2E86FD41-C179-456E-8E6A-5157ED427228}'.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x8510C01B%25400x31BA4472%25401222%254052007
BUTTONS:
&Retry
Cancel
2:
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:
SQL Server Browser configuration for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' was cancelled by user after a previous installation failure. The last attempted step: Retrieving full path to the SQL Server Browser service executable using Windows Installer
API for the SQL Server Browser component with ID '{2E86FD41-C179-456E-8E6A-5157ED427228}'..
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x8510C01B%25400x31BA4472%25401222%254052007
BUTTONS:
OK
After ignoring these step..installation getting complete but ..at the end i am not able to connect to server.
Could you please help me on this.
Thanks,
Sumit -
Hello,
When I am installing SQL Server 2008 on win7, I encountered an error: SQL Server Setup has encountered the following error: Method not found:'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()‘
What's the metter? What can I do to deal with it?
I need your speed answers.
Thanks,
Vicky SongHello,
Looking at your issue I am wondering if your media is corrupt.
What edition of SQL Server you are trying to install? Did you download that media?
If you downloaded it, perhaps you should try to download it again.
Are you able to install that SQL Server 2008 on another machine without any problem?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL Server Setup failure (Error code 0x858C001B)
Hola..
Vengo con un problema que me esta causando desesperacion, ya he buscado en los hilos y no puedo solucionar este problema.
Resulta que descargue la version de SQL Server Express 2012 64 bits y al quere instalarlo me muestra el error:
SQL Server Setup has encountered the following error:
The SQL Server license agreement cannot be located for the selected edition, EXPRESS. This could be a result of corrupted media or the edition being unsupported by the media.
Error code 0x858C001B
Ya he buscado y no encuentro respuesta.
SQL Server Setup failure (Error code 0x858C001B)Hi,
Can u have look at this Discussion
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
SQL Server Setup Failure 0x84B10001 (SQL 2012 SP2 and SQL 2014 Standard)
I'm having a problem with SQL Server Setup. I had SQL Server 2012 R2 SP1 installed, and the SP2 installer would fail.
I decided to just get SQL Server 2014. The setup (and system configuration checker) for that fails with the same error.
SQL Server Setup failure
SQL Server Setup has encountered the following error:
'.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
Error code 0x84B10001
I found this and other posts about similar problems that point at MSDE being the cause.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bc9f4949-1b45-427c-aa2b-d2222488a13e/problems-installing-sql-server-2012error-code-0x84b10001?forum=sqlexpress
I definitely had MSDE installed, but I went through the steps to manually remove it and rebooted with no luck.
/* Don Reynolds */(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.SqlBrowserExtension.sqlBrowserStopServicePrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.SqlBrowserExtension.sqlBrowserStopServicePrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.SqlBrowserExtension.sqlBrowserStopServicePrivateConfig.xsd' loaded
into datastore path '/Datastore/ProductSettings/SqlBrowserStopService/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPublicConfigObject.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPublicConfigObjectDefault.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPublicConfigObjectDefault.xml' validated with schema 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPublicConfigObject.xsd' loaded into datastore path '/Datastore/ProductSettings/Sku/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPrivateConfigObject.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPrivateConfigObjectDefault.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPrivateConfigObjectDefault.xml' validated with schema 'Microsoft.SqlServer.Configuration.SetupExtension.SkuPrivateConfigObject.xsd' loaded into datastore path '/Datastore/ProductSettings/Sku/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Repl_ConfigExtension.ReplPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Repl_ConfigExtension.ReplPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Repl_ConfigExtension.ReplPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.Repl_ConfigExtension.ReplPrivateSettings.xsd' loaded into datastore path
'/Datastore/ProductSettings/Repl/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPublicDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPublicDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPublicDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPublicDefaultSettings.xsd' loaded into datastore
path '/Datastore/ProductSettings/SqlRSSHP/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPrivateDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSSHPExtension.SqlRSSHPConfigPrivateDefaultSettings.xsd' loaded into
datastore path '/Datastore/ProductSettings/SqlRSSHP/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPublicDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPublicDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPublicDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPublicDefaultSettings.xsd' loaded into datastore path
'/Datastore/ProductSettings/SqlRS/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPrivateDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSConfigPrivateDefaultSettings.xsd' loaded into datastore path
'/Datastore/ProductSettings/SqlRS/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSDBConfigPrivateDefaultSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSDBConfigPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSDBConfigPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.RSExtension.SqlRSDBConfigPrivateDefaultSettings.xsd' loaded into datastore
path '/Datastore/ProductSettings/SqlRS/DBPrivate'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPublicSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPublicDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPublicDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPublicSettings.xsd'
loaded into datastore path '/Datastore/ProductSettings/ManagementTools/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsPrivateSettings.xsd'
loaded into datastore path '/Datastore/ProductSettings/ManagementTools/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPublicSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPublicDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPublicDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPublicSettings.xsd'
loaded into datastore path '/Datastore/ProductSettings/ManagementToolsAdvanced/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.ManagementToolsExtension.ManagementToolsAdvancedPrivateSettings.xsd'
loaded into datastore path '/Datastore/ProductSettings/ManagementToolsAdvanced/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ControllerPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ControllerPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ControllerPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ControllerPrivateSettings.xsd' loaded
into datastore path '/Datastore/ProductSettings/DReplayController/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ClientPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ClientPrivateDefaultSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ClientPrivateDefaultSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.DistributedReplayExtension.ClientPrivateSettings.xsd' loaded into
datastore path '/Datastore/ProductSettings/DReplayClient/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterDisk/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterDiskPublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterDisk/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterGroup/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterGroupPublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterGroup/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterIPAddresses/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterIPAddresses/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/FailOverClusterName/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.FailoverInstanceNamePublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/FailoverClusterName/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePrivateConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePrivateConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePrivateConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePrivateConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterNode/Private'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePublicConfig.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePublicConfig.xml' validated with schema 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodePublicConfig.xsd' loaded into datastore path '/Datastore/ProductSettings/ClusterNode/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.SlpExtension.SQLServerSCPPrivateSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.SlpExtension.SQLServerSCPPrivateSettings.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.SlpExtension.SQLServerSCPPrivateSettings.xml' validated with schema 'Microsoft.SqlServer.Configuration.SlpExtension.SQLServerSCPPrivateSettings.xsd' loaded into datastore path '/Datastore/ProductSettings/SQLServerSCP/Private'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodesStatusPublicConfig.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.Cluster.ClusterNodesStatusPublicConfig.xml' loaded into datastore path '/Datastore/ProductSettings/ClusterNodesStatus/Public'
(01) 2014-07-02 10:52:57 Slp: Reading schema resource 'Microsoft.SqlServer.Configuration.ASExtension.ASSPIInputSettings.xsd'
(01) 2014-07-02 10:52:57 Slp: Reading XML resource 'Microsoft.SqlServer.Configuration.ASExtension.ASSPIInputSettingsDefaults.xml'
(01) 2014-07-02 10:52:57 Slp: Document 'Microsoft.SqlServer.Configuration.ASExtension.ASSPIInputSettingsDefaults.xml' validated with schema 'Microsoft.SqlServer.Configuration.ASExtension.ASSPIInputSettings.xsd' loaded into datastore path '/Datastore/ProductSettings/ASSIP/Public'
(01) 2014-07-02 10:52:57 Slp: Completed Action: LoadPackageDatastoreObjects, returned True
(01) 2014-07-02 10:52:57 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:57 Slp: Running Action: InitializeInputSettingStore
(01) 2014-07-02 10:52:57 Slp: Completed Action: InitializeInputSettingStore, returned True
(01) 2014-07-02 10:52:57 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:57 Slp: Running Action: InitializeRoleService
(01) 2014-07-02 10:52:57 Slp: Loading role: SPI_AS_NewFarm
(01) 2014-07-02 10:52:58 Slp: Loading role: SPI_AS_ExistingFarm
(01) 2014-07-02 10:52:58 Slp: Loading role: AllFeatures_WithDefaults
(01) 2014-07-02 10:52:58 Slp: Completed Action: InitializeRoleService, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ProcessChainerCommandLineArguments
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: WORKFLOW
(01) 2014-07-02 10:52:58 Slp: Value specified: RUNRULES
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: TIMESTAMP
(01) 2014-07-02 10:52:58 Slp: Value specified: 20140702_105236
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: LOGMARKER
(01) 2014-07-02 10:52:58 Slp: Value specified:
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: MEDIASOURCE
(01) 2014-07-02 10:52:58 Slp: Value specified: R:\
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: INSTALLMEDIAPATH
(01) 2014-07-02 10:52:58 Slp: Value specified: R:\x64\setup\
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: ENU
(01) 2014-07-02 10:52:58 Slp: Value specified: True
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: MEDIALAYOUT
(01) 2014-07-02 10:52:58 Slp: Value specified: Full
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: ACTION
(01) 2014-07-02 10:52:58 Slp: Value specified: RUNRULES
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: RULES
(01) 2014-07-02 10:52:58 Slp: Value specified: SCCCheckRules
(01) 2014-07-02 10:52:58 Slp: New setting source: CommandLine; previous setting source: Default
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Completed Action: ProcessChainerCommandLineArguments, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ProcessMediaChainerConfigFileArguments
(01) 2014-07-02 10:52:58 Slp: Procssing media configuration file R:\x64\setup\..\DefaultSetup.ini.
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Setting: PID
(01) 2014-07-02 10:52:58 Slp: New setting source: ConfigFile; previous setting source: NotSpecified
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------
(01) 2014-07-02 10:52:58 Slp: Completed Action: ProcessMediaChainerConfigFileArguments, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ProcessChainerConfigFileArguments
(01) 2014-07-02 10:52:58 Slp: Completed Action: ProcessChainerConfigFileArguments, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ProcessSlipstreamParameters
(01) 2014-07-02 10:52:58 Slp: Completed Action: ProcessSlipstreamParameters, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Skipping Action: SetRoleAndUIModeForExpressMedia
(01) 2014-07-02 10:52:58 Slp: Action is being skipped due to the following restrictions:
(01) 2014-07-02 10:52:58 Slp: Condition "IsMediaExpress" did not pass as it returned false and true was expected.
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: InitializeRetryHandler
(01) 2014-07-02 10:52:58 Slp: Completed Action: InitializeRetryHandler, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ExecuteBootstrapProcessInputSettings
(01) 2014-07-02 10:52:58 Slp: Workflow to execute: 'BOOTSTRAPPROCESSINPUTSETTINGS'
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: StartSqmSession
(01) 2014-07-02 10:52:58 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-07-02 10:52:58 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\120
(01) 2014-07-02 10:52:58 Slp: Sco: Attempting to get registry value CustomerFeedback
(01) 2014-07-02 10:52:58 Slp: SQM Service: Sqm does not have active session.
(01) 2014-07-02 10:52:58 Slp: SQM is opted-out by command line parameter /SQMREPORTING or registry key setting, SQM session is closed
(01) 2014-07-02 10:52:58 Slp: Completed Action: StartSqmSession, returned True
(01) 2014-07-02 10:52:58 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:58 Slp: Running Action: ValidateChainerSetting
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Compute new PID
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Read lcid 1033 from CultureInfo
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:58 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: Completed Action: ValidateChainerSetting, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: ProcessFeatureCommandLineArguments
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------
(01) 2014-07-02 10:52:59 Slp: Completed Action: ProcessFeatureCommandLineArguments, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: ProcessMediaFeatureConfigFileArguments
(01) 2014-07-02 10:52:59 Slp: Procssing media configuration file R:\x64\setup\..\DefaultSetup.ini.
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------
(01) 2014-07-02 10:52:59 Slp: Completed Action: ProcessMediaFeatureConfigFileArguments, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: ProcessFeatureConfigFileArguments
(01) 2014-07-02 10:52:59 Slp: Completed Action: ProcessFeatureConfigFileArguments, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: ValidateSettingsAgainstScenario
(01) 2014-07-02 10:52:59 Slp: Scenario: RunRules
(01) 2014-07-02 10:52:59 Slp: Completed Action: ValidateSettingsAgainstScenario, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: FinalCalculateSettings
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid is normalizing input pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid
(01) 2014-07-02 10:52:59 Slp: -- PidInfoProvider : Use cached PID
(01) 2014-07-02 10:52:59 Slp: Completed Action: FinalCalculateSettings, returned True
(01) 2014-07-02 10:52:59 Slp: Completed Action: ExecuteBootstrapProcessInputSettings, returned True
(01) 2014-07-02 10:52:59 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True
(01) 2014-07-02 10:52:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:52:59 Slp: Running Action: RunRemoteDiscoveryAction
(01) 2014-07-02 10:52:59 Slp: Running discovery on local machine
(01) 2014-07-02 10:53:03 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2014-07-02 10:53:03 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747. ---> Microsoft.SqlServer.Chainer.Infrastructure.ChainerInfrastructureException:
'.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747. ---> System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.Throw(Exception e)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ThrowInvalidChar(Int32 pos, Char invChar)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseNumericCharRefInline(Int32 startPos, Boolean expand, BufferBuilder internalSubsetBuilder, Int32& charCount, EntityType& entityType)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseNumericCharRef(Boolean expand, BufferBuilder internalSubsetBuilder, EntityType& entityType)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.HandleEntityReference(Boolean isInAttributeValue, EntityExpandType expandType, Int32& charRefEndPos)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseAttributeValueSlow(Int32 curPos, Char quoteChar, NodeData attr)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseAttributes()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseElement()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseElementContent()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlLoader.LoadNode(Boolean skipOverWhitespace)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlDocument.Load(XmlReader reader)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(String xml, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: --- End of inner exception stack trace ---
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(String xml, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(XmlDocument doc, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
(01) 2014-07-02 10:53:03 Slp: --- End of inner exception stack trace ---
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
(01) 2014-07-02 10:53:03 Slp: Received request to add the following file to Watson reporting: c:\temp\tmpFEEB.tmp
(01) 2014-07-02 10:53:03 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2014-07-02 10:53:03 Slp: Inner exceptions are being indented
(01) 2014-07-02 10:53:03 Slp:
(01) 2014-07-02 10:53:03 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInfrastructureException
(01) 2014-07-02 10:53:03 Slp: Message:
(01) 2014-07-02 10:53:03 Slp: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
(01) 2014-07-02 10:53:03 Slp: HResult : 0x84b10001
(01) 2014-07-02 10:53:03 Slp: FacilityCode : 1201 (4b1)
(01) 2014-07-02 10:53:03 Slp: ErrorCode : 1 (0001)
(01) 2014-07-02 10:53:03 Slp: Stack:
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(String xml, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(XmlDocument doc, XmlSchema schema, String namespacePrefix, String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
(01) 2014-07-02 10:53:03 Slp: Inner exception type: System.Xml.XmlException
(01) 2014-07-02 10:53:03 Slp: Message:
(01) 2014-07-02 10:53:03 Slp: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
(01) 2014-07-02 10:53:03 Slp: HResult : 0x80131940
(01) 2014-07-02 10:53:03 Slp: Stack:
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.Throw(Exception e)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ThrowInvalidChar(Int32 pos, Char invChar)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseNumericCharRefInline(Int32 startPos, Boolean expand, BufferBuilder internalSubsetBuilder, Int32&
charCount, EntityType& entityType)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseNumericCharRef(Boolean expand, BufferBuilder internalSubsetBuilder, EntityType& entityType)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.HandleEntityReference(Boolean isInAttributeValue, EntityExpandType expandType, Int32& charRefEndPos)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseAttributeValueSlow(Int32 curPos, Char quoteChar, NodeData attr)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseAttributes()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseElement()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlTextReaderImpl.ParseElementContent()
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlLoader.LoadNode(Boolean skipOverWhitespace)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlLoader.LoadDocSequence(XmlDocument parentDoc)
(01) 2014-07-02 10:53:03 Slp: at System.Xml.XmlDocument.Load(XmlReader reader)
(01) 2014-07-02 10:53:03 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument(String xml, XmlSchema schema, String namespacePrefix,
String namespaceUri, String rootPath)
(01) 2014-07-02 10:53:08 Slp: Watson Bucket 2
Original Parameter Values
(01) 2014-07-02 10:53:08 Slp: Parameter 0 : SQL Server
2014@RTM@
(01) 2014-07-02 10:53:08 Slp: Parameter 1 : Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.LoadXmlDocument
(01) 2014-07-02 10:53:08 Slp: Parameter 2 : System.Xml.XmlTextReaderImpl.Throw
(01) 2014-07-02 10:53:08 Slp: Parameter 3 :
Microsoft.SqlServer.Chainer.Infrastructure.ChainerInfrastructureException@1201@1
(01) 2014-07-02 10:53:08 Slp: Parameter 4 :
System.Xml.XmlException@-2146232000
(01) 2014-07-02 10:53:08 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-07-02 10:53:08 Slp:
Final Parameter Values
(01) 2014-07-02 10:53:08 Slp: Parameter 0 : SQL Server
2014@RTM@
(01) 2014-07-02 10:53:08 Slp: Parameter 1 : 0xDBE3EAAC
(01) 2014-07-02 10:53:08 Slp: Parameter 2 : 0x066FCAFD
(01) 2014-07-02 10:53:08 Slp: Parameter 3 :
0xDF039760@1201@1
(01) 2014-07-02 10:53:08 Slp: Parameter 4 : 0x5539C151
(01) 2014-07-02 10:53:08 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-07-02 10:53:09 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140702_105236\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
(01) 2014-07-02 10:53:10 Slp: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 231747.
(01) 2014-07-02 10:53:10 Slp: Watson bucket for exception based failure has been created
(01) 2014-07-02 10:53:10 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-07-02 10:53:10 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\120
(01) 2014-07-02 10:53:10 Slp: Sco: Attempting to get registry value EnableErrorReporting
(01) 2014-07-02 10:53:10 Slp: WER: Successfully read app consent from registry Software\Microsoft\Microsoft SQL Server\120\EnableErrorReporting=.
(01) 2014-07-02 10:53:10 Slp: WER: Application level consent value '' was mapped to consent status 'WerConsentNotAsked'
(01) 2014-07-02 10:53:12 Slp: WER: Result of the submission:: 'WerReportCancelled'
(01) 2014-07-02 10:53:12 Slp: WER: Submitted 1 of 1 failures to the Watson data repository
(01) 2014-07-02 10:53:12 Slp:
(01) 2014-07-02 10:53:12 Slp: ----------------------------------------------------------------------
(01) 2014-07-02 10:53:12 Slp:
(01) 2014-07-02 10:53:12 Slp: Error result: -2068774911
(01) 2014-07-02 10:53:12 Slp: Result facility code: 1201
(01) 2014-07-02 10:53:12 Slp: Result error code: 1
(01) 2014-07-02 10:53:12 Slp: SQM Service: Sqm does not have active session.
/* Don Reynolds */ -
Need help trouble shooting Database Gateway for MS SQL Server setup, getting ORA-28546 error
Dear All,
I am trying to setup Oracle Database Gateway for MS SQL Server(I don't have admin access to the MS SQL Server). When I try to test the dblink connection, I get the following error.
I issued select * from dual@xyz;
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=dg4msql)))
ORA-02063: preceding 2 lines from xyz
28546. 0000 - "connection initialization failed, probable Net8 admin error"
My setup is the following.
1. Oracle 11gR2 running on Oracle Linux 6, the same version gateway is installed on the same server, but different home directory.
2. Oracle DB home directory is /u01/app/oracle/product/11.2.0/dbhome_1, gateway home directory is /u01/gateway.
3. I use the same listener.ora file for both the db and the gateway.
4. the contents of my listener.ora, tnsnames.ora and the initdg4msql.ora are below.
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
#(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
mssql =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=db.abc.com.tw)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME=orcl)
SID_LIST_mssql =
(SID_LIST =
(SID_DESC =
(SID_NAME=dg4msql)
(ENVS=LD_LIBRARY_PATH=/u01/gateway/dg4msql/driver/lib:/u01/gateway/lib)
(PROGRAM_NAME=/u01/gateway/bin/dg4msql)
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = db.abc.com.tw)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.abc.com.tw)
dg4msql =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521))
(CONNECT_DATA=(SID=dg4msql))
(HS=OK)
/u01/gateway/dg4msql/admin/initdg4msql.ora
HS_FDS_CONNECT_INFO=[192.168.0.1]:1433//XIETEST
# alternate connect format is hostname/serverinstance/databasename
HS_FDS_TRACE_LEVEL=255
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
dblink was created using statement below.
CREATE DATABASE LINK "xyz.abc.COM.TW"
CONNECT TO SA IDENTIFIED BY
USING 'dg4msql';
Couple more things, that I have done to check the work above.
[oracle@db admin]$ ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq=1 ttl=61 time=7.61 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=61 time=7.41 ms
^C
--- 192.168.0.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1818ms
rtt min/avg/max/mdev = 7.417/7.516/7.615/0.099 ms
[oracle@db admin]$ tnsping dg4msql
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:53:11
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=localhost)(PORT = 1521)) (CONNECT_DATA=(SID=dg4msql)) (HS=OK))
OK (0 msec)
[oracle@db admin]$ lsnrctl status mssql
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 11-SEP-2013 10:54:23
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias mssql
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 11-SEP-2013 10:09:46
Uptime 0 days 0 hr. 44 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/db/mssql/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "dg4msql" has 1 instance(s).
Instance "dg4msql", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Obviously, I would like to get this setup to work, but I also have couple other questions regarding this setup.
1. When installing the gateway, it asks to run the root.sh script. the root.sh script as for the following.
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: n
is the above answer correct?
Thanks for reading.Dear Klaus,
I did start a new SQL*PLUS session
The output of /u01/gateway/bin/dg4msql is
[oracle@db log]$ /u01/gateway/bin/dg4msql
Oracle Corporation --- WEDNESDAY SEP 11 2013 14:45:06.604
Heterogeneous Agent Release 11.2.0.1.0 - 64bit Production Built with
Oracle Database Gateway for MSSQL
The output of env is
HOSTNAME=db.abc.com.tw
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
ORACLE_UNQNAME=orcl
TMPDIR=/tmp
QTDIR=/usr/lib64/qt-3.3
QTINC=/usr/lib64/qt-3.3/include
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib:/lib:/usr/lib
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:
ORACLE_SID=orcl
ORACLE_BASE=/u01/app/oracle
ORACLE_HOSTNAME=db.abc.com.tw
MAIL=/var/spool/mail/oracle
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/sbin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/oracle/bin
PWD=/home/oracle
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HISTCONTROL=ignoredups
SHLVL=1
HOME=/home/oracle
TMP=/tmp
LOGNAME=oracle
QTLIB=/usr/lib64/qt-3.3/lib
CVS_RSH=ssh
CLASSPATH=/u01/app/oracle/product/11.2.0/dbhome_1/jlib:/u01/app/oracle/product/11.2.0/dbhome_1/rdbms/jlib
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
G_BROKEN_FILENAMES=1
_=/bin/env -
Database link to SQL Server Init error
Hi all,
i´m tryng to create a dblink between Oracle 10.2.0 in a RHEL4 and a SQL Server.
I can connect using isql but when i try using sqlplus i obtain this error:
SQL> CREATE DATABASE LINK dbl
CONNECT TO "user"
IDENTIFIED BY "pwd"
USING 'hsodbc'; 2 3 4
Enlace con la base de datos creado.
SQL> SELECT * FROM Table_1@dbl;
SELECT * FROM Table_1@dbl
ERROR en línea 1:
ORA-28545: error diagnosticado por Net8 al conectar a un agente (error in Net8 while connecting an agent)
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: 2 lines precediendo a DBL
This is the error explanantion in Oracle Docs:
I think the problem is the ini file inithsodbc.ora.
inithsodbc.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
# AAB - Parametros para asociar un agente ODBC al HS
HS_FDS_CONNECT_INFO = MSQLS
HS_FDS_TRACE_LEVEL = ON
HS_FDS_SHAREABLE_NAME =/usr/local/freetds/lib/libtdsodbc.so
HS_AUTOREGISTER = true
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
listener.ora
# listener.ora Network Configuration File: /app/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = STA2)
(ORACLE_HOME = /app/oracle/oracle/product/10.2.0/db_1)
(SID_DESC = (SID_NAME=hsodbc)
(ORACLE_HOME=/app/oracle/oracle/product/10.2.0/db_1)
(PROGRAM=hsodbc)
(ENVS=LD_LIBRARY_PATH=/app/oracle/oracle/product/10.2.0/db_1/lib:/usr/local/lib)
LISTENER =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
tnsnames.ora
# tnsnames.ora Network Configuration File: /app/oracle/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEVSTA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = devSTA)
STA2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = STA2)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
STA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = STA)
#AAB - Descripcion de servicio para conectar con SQLServer
HSODBC = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)
(HOST=nemesisgr2.hi.inet)
(PORT=1521)
(CONNECT_DATA = (SID=hsodbc)
(HS = OK)
ODBC Files
odbc.ini
[ODBC Data Sources]
MSQLS = Microsoft SQL Server
[MSQLS]
Driver = /usr/local/freetds/lib/libtdsodbc.so
Description = Microsoft SQL Server
Trace = No
Servername = sqlserver
Database = master
[Default]
Driver = /usr/local/freetds/lib/libtdsodbc.so
odbcinst.ini
[PostgreSQL]
Description = ODBC for PostgreSQL
Driver = /usr/lib/libodbcpsql.so
Setup = /usr/lib/libodbcpsqlS.so
FileUsage = 1
[MSQLSDRIVER]
Description = Driver for MS SQL Server
Driver = /usr/local/freetds/lib/libtdsodbc.so
Setup = /usr/lib64/libtdsS.so
FileUsage = 1
UsageCount = 5
freetds.conf
# $Id: freetds.conf,v 1.12 2007/12/25 06:02:36 jklowden Exp $
# This file is installed by FreeTDS if no file by the same
# name is found in the installation directory.
# For information about the layout of this file and its settings,
# see the freetds.conf manpage "man freetds.conf".
# Global settings are overridden by those in a database
# server specific section
[global]
# TDS protocol version
; tds version = 4.2
# Whether to write a TDSDUMP file for diagnostic purposes
# (setting this to /tmp is insecure on a multi-user system)
; dump file = /tmp/freetds.log
; debug flags = 0xffff
# Command and connection timeouts
; timeout = 10
; connect timeout = 10
# If you get out-of-memory errors, it may mean that your client
# is trying to allocate a huge buffer for a TEXT field.
# Try setting 'text size' to a more reasonable limit
text size = 64512
# A typical Sybase server
[egServer50]
host = symachine.domain.com
port = 5000
tds version = 5.0
# A typical Microsoft server
[egServer70]
host = ntmachine.domain.com
port = 1433
tds version = 7.0
# Test MS SQl Server
[sqlserver]
Database = master
host = pruebas.hi.inet
port = 1433
tds version = 7.0
Any ideas??
Thanks in advance.
AlexI have changed the inithsodbc.ora file including:
HS_FDS_SHAREABLE_NAME =/usr/lib/libodbc.so (I have ODBC installed)
Here you are the other information:
lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 23-OCT-2008 09:29:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Bienvenido a LSNRCTL, escriba "help" para obtener información.
LSNRCTL> status
Conectándose a (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=nemesisgr2.hi.inet)(PORT=1521)))
ESTADO del LISTENER
Alias LISTENER
Versión TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Fecha de Inicio 22-OCT-2008 19:31:34
Tiempo Actividad 0 días 13 hr. 58 min. 29 seg.
Nivel de Rastreo off
Seguridad ON: Local OS Authentication
SNMP OFF
Parámetros del Listener /app/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log del Listener /app/oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Recibiendo Resumen de Puntos Finales...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nemesisgr2)(PORT=1521)))
Resumen de Servicios...
El servicio "STA" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2" tiene 2 instancia(s).
La instancia "STA2", con estado UNKNOWN, tiene 1 manejador(es) para este servicio...
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2XDB" tiene 1 instancia(s).
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2_XPT" tiene 1 instancia(s).
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STAXDB" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA_XPT" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "hsodbc" tiene 1 instancia(s).
La instancia "hsodbc", con estado UNKNOWN, tiene 1 manejador(es) para este servicio...
El comando ha terminado correctamente
LSNRCTL>
hsodbc
There is no output executing this command.
[oracle@nemesisgr2 ~]$ /app/oracle/oracle/product/10.2.0/db_1/bin/hsodbc
[oracle@nemesisgr2 ~]$
tnsping hsodbc
[oracle@nemesisgr2 ~]$ tnsping hsodbc
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 23-OCT-2008 09:35:58
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Archivos de parámetros utilizados:
/app/oracle/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Adaptador TNSNAMES utilizado para resolver el alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp) (HOST=nemesisgr2.hi.inet) (PORT=1521)) (CONNECT_DATA = (SID=hsodbc)) (HS = OK))
Realizado correctamente (40 mseg)
Rgds,
Alex -
SQL Server 2005 Error Message - when Right Clicking a DB Properties
Hi
We are running SQL Server 2005 SP03, we have x15 databases (excluding SBO-COMMON, RSP, Coresuite), all x15 databases have Maintenance Plans setup, tasks ticked:
- Shrink Database
- Clean Up History
- Back up Database (Full)
- Maintenance Clean-up task
These Maintenance Plans have been running for over 5 months now, we have recently changed our VMware Virtual Server over to a Hosted VMware Virtual Server, now when I right click on a certain database and select "Properties" I get the following error message with SQL Server:
Property Owner is not available for Database '[Turquoise_Moon_Live]'. This property may not exist for this object, or may not be retrievable due to insufficient access rights. (Microsoft.SqlServer.Smo)
Could the Maintenance Plan be preventing me to run the Properties against a relevant DB (I have tested this by restoring a DB that doe not have a Maintenance Plan and the Properties works, tested this on SBO-COMMON and it works as well)
Can anyone agree with me or let me know what else might be the issue as I have checked the Server Roles & the Users Credentials for SQL and all seems well.
Regards
Kurt WaltersHi Gordon
This solution did not work, but I needed to delete the Maintenance Plans anyway to set it for 1 month instead of 2 Months. I am thinking as we have changed Domains, were the last one was IS Domain and the new one is Hosted Domain, the security issues are probably coming from this (as I am able to access the Properties of the IS Domain SQL Server even with the Maintenance Plans running).
Any thoughts on correcting this as we have changed Domains? (I have created a user as HOSTED\example, the old one was IS\example)
Regards
Kurt Walters -
Installation of SCCM 2012 R2 and SQL Server 2014 error
Hello All,
I am attempting to setup SQL Server 2014 and SCCM 2012 R2 but I keep running into an error stating that "Configuration Manager requires Microsoft SQL Server
2008 SP2 w/ CU9........ all the way up to Microsoft SQL Server 2012 with CU2 or higher." I am using all evaluation versions for this configuration as we are looking to test and evaluate the products. I was trying it with SQL 2014 because I was running
into the same error with SQL 2012 and according to "http://blogs.technet.com/b/configmgrteam/archive/2015/03/30/updated-sc2012-configmgr-sp1-and-sc2012r2-configmgr-support-sql-server-2014.aspx" SQL
2014 is supported with SCCM 2012 R2. SQL is installed locally on the same box.
Any suggestions would be appreciated.
Thanks,
Tucker
Update: When running the Pre-Req check these are some of the failed returns.....
SQL Server Edition: Failed: Configuration Manager primary site and central administration site don't support SQL Server Express Edition
Not sure why it is recognizing SQL Express as this is a new machine.
SQL Server service running account: Failed: The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE. You must configure
the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
For the SQL Service I am using a domain account created specifically for this.This has nothing to do with moving or restoring. The kb article says "This hotfix provides updated versions of the setup files and enables new installations
of the System Center 2012 R2 Configuration Manager site database role and the System Center 2012 Configuration Manager SP1 site database role in Microsoft SQL Server 2014"
Torsten Meringer | http://www.mssccmfaq.de -
SQL Server Mirroring Error 1418
Hi,
I am currently setting up an SQL Server Mirror with only two Servers running SQL Server 2008 R2 Standard edition
My setup is using only a Principal and a Mirror with no Witness.
Port being used is 5022 on both servers. I am able to telnet the servers both ways
Only thing I noticed is that the endpoint name is different on each server.
I am able to complete the configuration using the wizard without any issue.
I however when starting the Mirror, I get the attached error message
ThanksHallo Nilesh,
did you run through the checklist with error 1418 here:
http://msdn.microsoft.com/en-us/library/ms189127.aspx
Uwe Ricken
MCITP Database Administrator 2005
MCITP Database Administrator 2008
MCITP Microsoft SQL Server 2008, Database Development
db Berater GmbH
http://www-db-berater.de
SQL Server Blog (german only) -
BI to SQL Server Conncetion Errors
Hi,
We are getting an RFC Connection error like "ERROR: Program
MSSAPBI_PROG not registered" while connecting to SQL Server as per the below link.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40ea8832-59ac-2d10-ceae-87ee8d1f8da4?quicklink=index&overridelayout=true]
RFC Connection test Erros in SM59:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program MSSAPBI_PROG not registered
Error Details LOCATION: SAP-Gateway on host HIMDEVBIW.himalaya.ac / sapgw00
Error Details DETAIL: TP MSSAPBI_PROG not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 4054
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1871
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Sep 09 13:59:48 2011
Error Details VERSION: 2
DTP Monitor got the following errors for that request.
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system MSSAPBI.
Message no. RSBO523
Error when opening an RFC connection
Message no. RSBO899
Error while updating to target ZSTCK_CAT (type Open Hub Destination)
Message no. RSBK241
Operation could not be carried out for
Message no. RS_EXCEPTION120
Exception CX_RS_FAILED logged
Message no. RSBK228
We tried to register the program in BI server as per below link with command but it was not showing anything in SMGW
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
Error 'Program not registered' while testing RFC
If anybody face this issue , request you to reply ASAP.
Best Regards,
SGHi SG & Federico,
Kindly have a look at below note,
For error message: RSBO899
1497204 P25: DTP: Open hub confirmation does not always work
Symptom:
The confirmation of a third-party tool that has generated an open hub
data transfer process (DTP) request does not always work if the
third-party tool calls the function module
RSB_API_OHS_REQUEST_SETSTATUS.
Hope this helps.
Regards,
Mani -
SQL Server monitoring error event log 4001
hello Experts ,
We have SCOM 2012 R2 environment ,I have installed SQL SERVER MPs 6.5.0.1 and installed SCOM agent on some of SQL Server. Some of the SQL Server are monitoring working properly not all SQL Server but getting error for some of SQL Server in event log
Event :4001
Management Group: SCOMMgtGroup. Script: Main Module: CPUUsagePercentDataSource.ps1 :
Computer Name = 'MHSSCOM01.memnet.org' WMI = 'ComputerManagement11' Service Name = 'MSSQLSERVER' SQL Instance Name = 'MSSQLSERVER'
Exception calling "Fill" with "1" argument(s): "The user does not have permission to perform this action."Error occured during CPU Usage for SQL Instances data source executing.
Computer:MHSSCOM01
Reason: Exception calling "Fill" with "1" argument(s): "The user does not have permission to perform this action."
also not getting Database information within the SQL Server instances for these SQL Server within "Instances Summary "
for resolution ,I have created a Run as account (windows)for SQL monitoring then associated it with Run as profile with SQL Server default account,Discovery account and Monitoring account and distribute it securely to each SQL Server health service object
.The run as account have added to local admin group on each SQL server.
How to resolved the event log error and how to get database information for all instances of sql server.
Thanks
RICHAHi,
It seems like that the action account that run the script does not have enough permissions on the monitored SQL server, I would like to suggest you follow the below link to check your runas account configuration:
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
And make sure the action account also have SQL admin account to the SQL server.
Here is also a link that may be helpful for you:
http://blogs.technet.com/b/momteam/archive/2014/05/12/kb-event-4001-in-the-operations-manager-log-during-sql-server-2012-monitoring.aspx
Regards,
Yan Li
Regards, Yan Li -
MS SQL Server 2014: Error inserting into Temp table with index and identity field
In this thread, I mentioned a problem with SQL Server 2014:
SQL Server 2014: Bug with IDENTITY INSERT ON
The question was answered, it is a bug. To keep you informed on this issue, I open this discussion.
Problem:
The code below works perfectly fine on MS SQL Server 2008 R2 and MS SQL Server 2012, but gives an error every second time the proc is executed on MS SQL Server 2014. If I do not define any index on the temp table, the problem disappears. Defining the index
after the insert, does not help.
SET NOCOUNT ON
GO
IF EXISTS (SELECT 1 FROM sys.procedures WHERE name = 'usp_Test') DROP PROC dbo.usp_Test;
GO
CREATE PROC dbo.usp_Test AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #Source(ID integer NOT NULL);
INSERT INTO #Source VALUES (1), (2), (3);
CREATE TABLE #Dest (ID integer IDENTITY(1,1) NOT NULL);
CREATE INDEX #IDX_Dest ON #Dest (ID);
PRINT 'Check if the insert might cause an identity crisis';
SELECT 'Source' AS SourceTable, * FROM #Source;
SELECT 'Destination' AS DestTable, * FROM #Dest;
SET IDENTITY_INSERT #Dest ON;
PRINT 'Do the insert';
INSERT INTO #Dest (ID) SELECT ID FROM #Source;
PRINT 'Insert ready';
SET IDENTITY_INSERT #Dest OFF;
SELECT * FROM #Dest;
DROP TABLE #Source;
DROP TABLE #Dest;
END;
GO
PRINT 'First execution of the proc, everything OK';
EXEC dbo.usp_Test;
PRINT '';
PRINT 'Second execution of the proc, the insert fails.';
PRINT 'Removing the index #IDX_Dest causes the error to disappear.';
EXEC dbo.usp_Test;
GO
DROP PROC dbo.usp_Test;
GOThere is some progress. Communication from a former Microsoft employee tells us this:
Shivendra Vishal
Engineer at Microsoft
I am no longer with MS, and I do not have code access, however from the public symbols, I could make out following:
sqlmin!SetidentI2I4+0x1f3:
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] ds:00000000`00000000=????????????????
ExceptionAddress: 000007fef4d865d3 (sqlmin!SetidentI2I4+0x00000000000001f3)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
This is a read AV and from registers it is clear that we were trying to move the value of location pointed by qword of register rax which is not valid:
rax=0000000000000000 rbx=0000000000000038 rcx=0000000000001030
rdx=0000000000000006 rsi=00000001f55def98 rdi=00000000106fd070
rip=000007fef4d865d3 rsp=00000000106fcf40 rbp=00000000106fcfe9
r8=0000000000000000 r9=00000001f55def60 r10=00000001f55defa0
r11=00000000106fcd20 r12=0000000000000000 r13=0000000000000002
r14=00000001f49c3860 r15=00000001f58c0040
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
The stack is:
# Child-SP RetAddr Call Site
00 00000000`106fcf40 000007fe`f30c1437 sqlmin!SetidentI2I4+0x1f3
01 00000000`106fd050 000007fe`f474e7ce sqlTsEs!CEsExec::GeneralEval4+0xe7
02 00000000`106fd120 000007fe`f470e6ef sqlmin!CQScanUpdateNew::GetRow+0x43d
03 00000000`106fd1d0 000007fe`f08ff517 sqlmin!CQueryScan::GetRow+0x81
04 00000000`106fd200 000007fe`f091cebe sqllang!CXStmtQuery::ErsqExecuteQuery+0x36d
05 00000000`106fd390 000007fe`f091ccb9 sqllang!CXStmtDML::XretDMLExecute+0x2ee
06 00000000`106fd480 000007fe`f08fa058 sqllang!CXStmtDML::XretExecute+0xad
07 00000000`106fd4b0 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
08 00000000`106fd5f0 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
09 00000000`106fd7e0 000007fe`f152cfaa sqllang!CSQLSource::Execute+0x86c
0a 00000000`106fd9b0 000007fe`f152c9e8 sqllang!CStmtExecProc::XretLocalExec+0x25a
0b 00000000`106fda30 000007fe`f152a1d8 sqllang!CStmtExecProc::XretExecExecute+0x4e8
0c 00000000`106fe1e0 000007fe`f08fa058 sqllang!CXStmtExecProc::XretExecute+0x38
0d 00000000`106fe220 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
0e 00000000`106fe360 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
0f 00000000`106fe550 000007fe`f0902267 sqllang!CSQLSource::Execute+0x86c
10 00000000`106fe720 000007fe`f0909087 sqllang!process_request+0xa57
11 00000000`106feee0 000007fe`f2bf49d0 sqllang!process_commands+0x4a3
12 00000000`106ff200 000007fe`f2bf47b4 sqldk!SOS_Task::Param::Execute+0x21e
13 00000000`106ff800 000007fe`f2bf45b6 sqldk!SOS_Scheduler::RunTask+0xa8
14 00000000`106ff870 000007fe`f2c136ff sqldk!SOS_Scheduler::ProcessTasks+0x279
15 00000000`106ff8f0 000007fe`f2c138f0 sqldk!SchedulerManager::WorkerEntryPoint+0x24c
16 00000000`106ff990 000007fe`f2c13246 sqldk!SystemThread::RunWorker+0x8f
17 00000000`106ff9c0 000007fe`f2c13558 sqldk!SystemThreadDispatcher::ProcessWorker+0x3ab
18 00000000`106ffa70 00000000`775d59ed sqldk!SchedulerManager::ThreadEntryPoint+0x226
19 00000000`106ffb10 00000000`7780c541 kernel32!BaseThreadInitThunk+0xd
1a 00000000`106ffb40 00000000`00000000 ntdll!RtlUserThreadStart+0x21
Unassembling the function:
000007fe`f4d8658e 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d86591 4533e4 xor r12d,r12d
000007fe`f4d86594 410fb7d5 movzx edx,r13w
000007fe`f4d86598 4533c9 xor r9d,r9d
000007fe`f4d8659b 4533c0 xor r8d,r8d
000007fe`f4d8659e 488bc8 mov rcx,rax
000007fe`f4d865a1 4489642420 mov dword ptr [rsp+20h],r12d
000007fe`f4d865a6 41ff5230 call qword ptr [r10+30h]
000007fe`f4d865aa 8b5597 mov edx,dword ptr [rbp-69h]
000007fe`f4d865ad 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d865b0 4489642438 mov dword ptr [rsp+38h],r12d
000007fe`f4d865b5 4489642430 mov dword ptr [rsp+30h],r12d
000007fe`f4d865ba 458d442401 lea r8d,[r12+1]
000007fe`f4d865bf 4533c9 xor r9d,r9d
000007fe`f4d865c2 488bc8 mov rcx,rax
000007fe`f4d865c5 c644242801 mov byte ptr [rsp+28h],1
000007fe`f4d865ca 4488642420 mov byte ptr [rsp+20h],r12b
000007fe`f4d865cf 41ff5250 call qword ptr [r10+50h]
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] <=================== AV happened over here
000007fe`f4d865d6 488bc8 mov rcx,rax
000007fe`f4d865d9 4c8bf0 mov r14,rax
000007fe`f4d865dc ff5268 call qword ptr [rdx+68h]
000007fe`f4d865df 488d55e7 lea rdx,[rbp-19h]
000007fe`f4d865e3 4c8b00 mov r8,qword ptr [rax]
000007fe`f4d865e6 488bc8 mov rcx,rax
000007fe`f4d865e9 41ff5010 call qword ptr [r8+10h]
000007fe`f4d865ed f6450a04 test byte ptr [rbp+0Ah],4
I remember few issues with scan2ident function, I am not sure if they have fixed it however it appears that this is intoduced to SQL 2014 and we need help from MS to get this resolved as it needs code analysis.
It is not getting simulated for other versions of SQL apart from SQL 2014.
Also to add, interestingly, the value of rax is not visibly changed and it was successfully passed on to rcx, which has a valid value, so something should have changed the value of rax inside call to function using call qword ptr [r10+50h], and looking at this
it appears that it might be a list of functions and we are going at particular offset [50h]. So, bottom line is that the call to function qword ptr [r10+50h], should be changing something in rax, and debugging/analyzing this code might give us some more idea. -
Hi All,
I am pulling data from SQL server(view) using WCF-SQL adapter, in DEV it's working fine and in test following is the error
I have checked the credentials and server name all are fine, But i couldn't figure out the issue.
Thanks in Advace
Recloc_WCFSQL
mssql://SQLSERVERTest/biztalkdb?InboundId=xyz
WCF-SQL
Microsoft.ServiceModel.Channels.Common.ConnectionException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing
a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo
serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer
timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString
connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection
owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout,
Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions
userOptions, DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal&
connection) at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1
retry) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.Adapters.Sql.SqlAdapterConnection.OpenConnection() --- End of inner exception stack trace --- at Microsoft.Adapters.Sql.SqlAdapterConnection.OpenConnection() at Microsoft.Adapters.Sql.ASDKConnection.Open(TimeSpan
timeout) at Microsoft.ServiceModel.Channels.Common.Design.ConnectionPool.GetConnection(Guid clientId, TimeSpan timeout) at Microsoft.ServiceModel.Channels.Common.Design.ConnectionPool.GetConnectionHandler[TConnectionHandler](Guid clientId, TimeSpan timeout,
MetadataLookup metadataLookup, String& connectionId) at Microsoft.ServiceModel.Channels.Common.Channels.AdapterChannelListener`1.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan
timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint.Enable()
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint..ctor(BizTalkEndpointContext endpointContext, IBTTransportProxy transportProxy, ControlledTermination control) at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiver`2.AddReceiveEndpoint(String url,
IPropertyBag adapterConfig, IPropertyBag bizTalkConfig)The first few things to check would be
Is TCP/IP Protocol enabled on the Test SQL Server Instance?
If it is configured is it running on the default port or a different port has been specified? In case a different port has been specified then your configuration URI should reflect that OR the SQLBrowser service needs to be running
The MS DTC configuration on the SQL Server need to have been configured with BOTH inbound/outbound enabled (Component Management - DTC)
The Windows Firewall on the BizTalk Server Test should be a) disabled or b) configured to permit connection to the SQL Server on either 1433 or the specific instance port.
Regards. -
SQL server connection error in sharepoint
We are getting below error with inetgrated security and custom DB sql server connection in sharepoint 2013.
This connectionstring works in dev with SQL username and password but in QA we are changing it to integrated authority.
<add name="OurConnectionString" connectionString="Data Source=OurDB;Initial Catalog=Catalogname;Integrated Security=SSPI" providerName="System.Data.SqlClient"> (This does not work in QA)
<add name="OurConnectionString" connectionString="Data Source=OurDB;Initial Catalog=Catalogname;User ID=user1;Password=ourpwd" providerName="System.Data.SqlClient" /> (This works in dev)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader
dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.S...
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.55* w3wp.exe (0x2434)
0x1EC0
Unknown
00000
Unexpected ...qlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnecti...
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.55* w3wp.exe (0x2434)
0x1EC0
Unknown
00000 Unexpected
...onString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool
pool, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbCon...
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.55* w3wp.exe (0x2434)
0x1EC0
Unknown
00000 Unexpected
...nectionOptions userOptions) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions,
DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFacto...
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.55* w3wp.exe (0x2434)
0x1EC0
Unknown
00000 Unexpected
...ry, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) at System.Data.SqlClient.SqlConnection.Open() at DBManager.ConnectionOpen()
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.74 w3wp.exe (0x2434)
0x1EC0
SharePoint Foundation Claims Authentication
aebgg High
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint LeadHi,
According to your post, an error occurred when you connect SQL Server in SharePoint.
We can do as follows:
1. Try to replace Integrated Security=SSPI with Integrated Security=True
2. Check whether there is <identity impersonate="true" /> under <system.web> tag in web.config.
Here are two articles for you to take a look at:
http://blogs.windwardreports.com/tomasr/2010/09/login-failed-nt-authorityanonymous-logon-integrated-securitysspi-vs-integrated-securitytrue.html
http://www.layer2solutions.com/en/community/FAQs/BDLC/Pages/How-SharePoint-BDLC-used-with-integrated-security-trusted-connection.aspx
Best Regards
Dennis Guo
TechNet Community Support
Maybe you are looking for
-
Some Photoshop issues after upgrading from CS5 Master to CS5.5 Master
Hello I'm a bit of a noob when it comes to the Adobe stuff. Not so with PC's Win 7 SP1 x64 8G RAM etc etc... I have a CS5.5 Master License and it is the update from CS5 that has thrown a wrench into my works. I had CS5 MAster Collection happily runni
-
Hey All... I have a new problem that has just started on my network. All my intel NetportExpress print servers have decided to start printing a blank page between every printed page. I have tried upgrading the firmware, deleting/recreating queue with
-
IAS delivers old files.
Hi, I have the following problem: We have put several Jar-Files to our iAS and use them inside formsweb.cfg in the archive_jini section. When we update this files the server still delivers the old file, even if i remove the file completely the server
-
Hi Friends, I've a doubt on how to add a column on title Say if we have a Title, Static text etc.. can we embbed a column next to it... Thanks, Mallli
-
The forthcoming "better" version of BT Yahoo! Mail
Some questions: (1) Can users opt-out of the "improvements", and just stay on the old mail system forever? (2) Assuming the upgrade is forced on us, will it possible to completely disable ALL spam filtering? (3) Will POP3 service be changed, or do th