BI to SQL Server Conncetion Errors
Hi,
We are getting an RFC Connection error like "ERROR: Program
MSSAPBI_PROG not registered" while connecting to SQL Server as per the below link.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40ea8832-59ac-2d10-ceae-87ee8d1f8da4?quicklink=index&overridelayout=true]
RFC Connection test Erros in SM59:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program MSSAPBI_PROG not registered
Error Details LOCATION: SAP-Gateway on host HIMDEVBIW.himalaya.ac / sapgw00
Error Details DETAIL: TP MSSAPBI_PROG not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 4054
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1871
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Sep 09 13:59:48 2011
Error Details VERSION: 2
DTP Monitor got the following errors for that request.
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system MSSAPBI.
Message no. RSBO523
Error when opening an RFC connection
Message no. RSBO899
Error while updating to target ZSTCK_CAT (type Open Hub Destination)
Message no. RSBK241
Operation could not be carried out for
Message no. RS_EXCEPTION120
Exception CX_RS_FAILED logged
Message no. RSBK228
We tried to register the program in BI server as per below link with command but it was not showing anything in SMGW
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
Error 'Program not registered' while testing RFC
If anybody face this issue , request you to reply ASAP.
Best Regards,
SG
Hi SG & Federico,
Kindly have a look at below note,
For error message: RSBO899
1497204 P25: DTP: Open hub confirmation does not always work
Symptom:
The confirmation of a third-party tool that has generated an open hub
data transfer process (DTP) request does not always work if the
third-party tool calls the function module
RSB_API_OHS_REQUEST_SETSTATUS.
Hope this helps.
Regards,
Mani
Similar Messages
-
Database link to SQL Server Init error
Hi all,
i´m tryng to create a dblink between Oracle 10.2.0 in a RHEL4 and a SQL Server.
I can connect using isql but when i try using sqlplus i obtain this error:
SQL> CREATE DATABASE LINK dbl
CONNECT TO "user"
IDENTIFIED BY "pwd"
USING 'hsodbc'; 2 3 4
Enlace con la base de datos creado.
SQL> SELECT * FROM Table_1@dbl;
SELECT * FROM Table_1@dbl
ERROR en línea 1:
ORA-28545: error diagnosticado por Net8 al conectar a un agente (error in Net8 while connecting an agent)
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: 2 lines precediendo a DBL
This is the error explanantion in Oracle Docs:
I think the problem is the ini file inithsodbc.ora.
inithsodbc.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
# AAB - Parametros para asociar un agente ODBC al HS
HS_FDS_CONNECT_INFO = MSQLS
HS_FDS_TRACE_LEVEL = ON
HS_FDS_SHAREABLE_NAME =/usr/local/freetds/lib/libtdsodbc.so
HS_AUTOREGISTER = true
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
listener.ora
# listener.ora Network Configuration File: /app/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = STA2)
(ORACLE_HOME = /app/oracle/oracle/product/10.2.0/db_1)
(SID_DESC = (SID_NAME=hsodbc)
(ORACLE_HOME=/app/oracle/oracle/product/10.2.0/db_1)
(PROGRAM=hsodbc)
(ENVS=LD_LIBRARY_PATH=/app/oracle/oracle/product/10.2.0/db_1/lib:/usr/local/lib)
LISTENER =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
tnsnames.ora
# tnsnames.ora Network Configuration File: /app/oracle/oracle/product/10.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEVSTA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = devSTA)
STA2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = STA2)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
STA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nemesisgr2.hi.inet)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = STA)
#AAB - Descripcion de servicio para conectar con SQLServer
HSODBC = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)
(HOST=nemesisgr2.hi.inet)
(PORT=1521)
(CONNECT_DATA = (SID=hsodbc)
(HS = OK)
ODBC Files
odbc.ini
[ODBC Data Sources]
MSQLS = Microsoft SQL Server
[MSQLS]
Driver = /usr/local/freetds/lib/libtdsodbc.so
Description = Microsoft SQL Server
Trace = No
Servername = sqlserver
Database = master
[Default]
Driver = /usr/local/freetds/lib/libtdsodbc.so
odbcinst.ini
[PostgreSQL]
Description = ODBC for PostgreSQL
Driver = /usr/lib/libodbcpsql.so
Setup = /usr/lib/libodbcpsqlS.so
FileUsage = 1
[MSQLSDRIVER]
Description = Driver for MS SQL Server
Driver = /usr/local/freetds/lib/libtdsodbc.so
Setup = /usr/lib64/libtdsS.so
FileUsage = 1
UsageCount = 5
freetds.conf
# $Id: freetds.conf,v 1.12 2007/12/25 06:02:36 jklowden Exp $
# This file is installed by FreeTDS if no file by the same
# name is found in the installation directory.
# For information about the layout of this file and its settings,
# see the freetds.conf manpage "man freetds.conf".
# Global settings are overridden by those in a database
# server specific section
[global]
# TDS protocol version
; tds version = 4.2
# Whether to write a TDSDUMP file for diagnostic purposes
# (setting this to /tmp is insecure on a multi-user system)
; dump file = /tmp/freetds.log
; debug flags = 0xffff
# Command and connection timeouts
; timeout = 10
; connect timeout = 10
# If you get out-of-memory errors, it may mean that your client
# is trying to allocate a huge buffer for a TEXT field.
# Try setting 'text size' to a more reasonable limit
text size = 64512
# A typical Sybase server
[egServer50]
host = symachine.domain.com
port = 5000
tds version = 5.0
# A typical Microsoft server
[egServer70]
host = ntmachine.domain.com
port = 1433
tds version = 7.0
# Test MS SQl Server
[sqlserver]
Database = master
host = pruebas.hi.inet
port = 1433
tds version = 7.0
Any ideas??
Thanks in advance.
AlexI have changed the inithsodbc.ora file including:
HS_FDS_SHAREABLE_NAME =/usr/lib/libodbc.so (I have ODBC installed)
Here you are the other information:
lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 23-OCT-2008 09:29:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Bienvenido a LSNRCTL, escriba "help" para obtener información.
LSNRCTL> status
Conectándose a (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=nemesisgr2.hi.inet)(PORT=1521)))
ESTADO del LISTENER
Alias LISTENER
Versión TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Fecha de Inicio 22-OCT-2008 19:31:34
Tiempo Actividad 0 días 13 hr. 58 min. 29 seg.
Nivel de Rastreo off
Seguridad ON: Local OS Authentication
SNMP OFF
Parámetros del Listener /app/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log del Listener /app/oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Recibiendo Resumen de Puntos Finales...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nemesisgr2)(PORT=1521)))
Resumen de Servicios...
El servicio "STA" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2" tiene 2 instancia(s).
La instancia "STA2", con estado UNKNOWN, tiene 1 manejador(es) para este servicio...
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2XDB" tiene 1 instancia(s).
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA2_XPT" tiene 1 instancia(s).
La instancia "STA2", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STAXDB" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "STA_XPT" tiene 1 instancia(s).
La instancia "STA", con estado READY, tiene 1 manejador(es) para este servicio...
El servicio "hsodbc" tiene 1 instancia(s).
La instancia "hsodbc", con estado UNKNOWN, tiene 1 manejador(es) para este servicio...
El comando ha terminado correctamente
LSNRCTL>
hsodbc
There is no output executing this command.
[oracle@nemesisgr2 ~]$ /app/oracle/oracle/product/10.2.0/db_1/bin/hsodbc
[oracle@nemesisgr2 ~]$
tnsping hsodbc
[oracle@nemesisgr2 ~]$ tnsping hsodbc
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 23-OCT-2008 09:35:58
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Archivos de parámetros utilizados:
/app/oracle/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Adaptador TNSNAMES utilizado para resolver el alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp) (HOST=nemesisgr2.hi.inet) (PORT=1521)) (CONNECT_DATA = (SID=hsodbc)) (HS = OK))
Realizado correctamente (40 mseg)
Rgds,
Alex -
SQL Server 2005 Error Message - when Right Clicking a DB Properties
Hi
We are running SQL Server 2005 SP03, we have x15 databases (excluding SBO-COMMON, RSP, Coresuite), all x15 databases have Maintenance Plans setup, tasks ticked:
- Shrink Database
- Clean Up History
- Back up Database (Full)
- Maintenance Clean-up task
These Maintenance Plans have been running for over 5 months now, we have recently changed our VMware Virtual Server over to a Hosted VMware Virtual Server, now when I right click on a certain database and select "Properties" I get the following error message with SQL Server:
Property Owner is not available for Database '[Turquoise_Moon_Live]'. This property may not exist for this object, or may not be retrievable due to insufficient access rights. (Microsoft.SqlServer.Smo)
Could the Maintenance Plan be preventing me to run the Properties against a relevant DB (I have tested this by restoring a DB that doe not have a Maintenance Plan and the Properties works, tested this on SBO-COMMON and it works as well)
Can anyone agree with me or let me know what else might be the issue as I have checked the Server Roles & the Users Credentials for SQL and all seems well.
Regards
Kurt WaltersHi Gordon
This solution did not work, but I needed to delete the Maintenance Plans anyway to set it for 1 month instead of 2 Months. I am thinking as we have changed Domains, were the last one was IS Domain and the new one is Hosted Domain, the security issues are probably coming from this (as I am able to access the Properties of the IS Domain SQL Server even with the Maintenance Plans running).
Any thoughts on correcting this as we have changed Domains? (I have created a user as HOSTED\example, the old one was IS\example)
Regards
Kurt Walters -
SQL Server monitoring error event log 4001
hello Experts ,
We have SCOM 2012 R2 environment ,I have installed SQL SERVER MPs 6.5.0.1 and installed SCOM agent on some of SQL Server. Some of the SQL Server are monitoring working properly not all SQL Server but getting error for some of SQL Server in event log
Event :4001
Management Group: SCOMMgtGroup. Script: Main Module: CPUUsagePercentDataSource.ps1 :
Computer Name = 'MHSSCOM01.memnet.org' WMI = 'ComputerManagement11' Service Name = 'MSSQLSERVER' SQL Instance Name = 'MSSQLSERVER'
Exception calling "Fill" with "1" argument(s): "The user does not have permission to perform this action."Error occured during CPU Usage for SQL Instances data source executing.
Computer:MHSSCOM01
Reason: Exception calling "Fill" with "1" argument(s): "The user does not have permission to perform this action."
also not getting Database information within the SQL Server instances for these SQL Server within "Instances Summary "
for resolution ,I have created a Run as account (windows)for SQL monitoring then associated it with Run as profile with SQL Server default account,Discovery account and Monitoring account and distribute it securely to each SQL Server health service object
.The run as account have added to local admin group on each SQL server.
How to resolved the event log error and how to get database information for all instances of sql server.
Thanks
RICHAHi,
It seems like that the action account that run the script does not have enough permissions on the monitored SQL server, I would like to suggest you follow the below link to check your runas account configuration:
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
And make sure the action account also have SQL admin account to the SQL server.
Here is also a link that may be helpful for you:
http://blogs.technet.com/b/momteam/archive/2014/05/12/kb-event-4001-in-the-operations-manager-log-during-sql-server-2012-monitoring.aspx
Regards,
Yan Li
Regards, Yan Li -
MS SQL Server 2014: Error inserting into Temp table with index and identity field
In this thread, I mentioned a problem with SQL Server 2014:
SQL Server 2014: Bug with IDENTITY INSERT ON
The question was answered, it is a bug. To keep you informed on this issue, I open this discussion.
Problem:
The code below works perfectly fine on MS SQL Server 2008 R2 and MS SQL Server 2012, but gives an error every second time the proc is executed on MS SQL Server 2014. If I do not define any index on the temp table, the problem disappears. Defining the index
after the insert, does not help.
SET NOCOUNT ON
GO
IF EXISTS (SELECT 1 FROM sys.procedures WHERE name = 'usp_Test') DROP PROC dbo.usp_Test;
GO
CREATE PROC dbo.usp_Test AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #Source(ID integer NOT NULL);
INSERT INTO #Source VALUES (1), (2), (3);
CREATE TABLE #Dest (ID integer IDENTITY(1,1) NOT NULL);
CREATE INDEX #IDX_Dest ON #Dest (ID);
PRINT 'Check if the insert might cause an identity crisis';
SELECT 'Source' AS SourceTable, * FROM #Source;
SELECT 'Destination' AS DestTable, * FROM #Dest;
SET IDENTITY_INSERT #Dest ON;
PRINT 'Do the insert';
INSERT INTO #Dest (ID) SELECT ID FROM #Source;
PRINT 'Insert ready';
SET IDENTITY_INSERT #Dest OFF;
SELECT * FROM #Dest;
DROP TABLE #Source;
DROP TABLE #Dest;
END;
GO
PRINT 'First execution of the proc, everything OK';
EXEC dbo.usp_Test;
PRINT '';
PRINT 'Second execution of the proc, the insert fails.';
PRINT 'Removing the index #IDX_Dest causes the error to disappear.';
EXEC dbo.usp_Test;
GO
DROP PROC dbo.usp_Test;
GOThere is some progress. Communication from a former Microsoft employee tells us this:
Shivendra Vishal
Engineer at Microsoft
I am no longer with MS, and I do not have code access, however from the public symbols, I could make out following:
sqlmin!SetidentI2I4+0x1f3:
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] ds:00000000`00000000=????????????????
ExceptionAddress: 000007fef4d865d3 (sqlmin!SetidentI2I4+0x00000000000001f3)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
This is a read AV and from registers it is clear that we were trying to move the value of location pointed by qword of register rax which is not valid:
rax=0000000000000000 rbx=0000000000000038 rcx=0000000000001030
rdx=0000000000000006 rsi=00000001f55def98 rdi=00000000106fd070
rip=000007fef4d865d3 rsp=00000000106fcf40 rbp=00000000106fcfe9
r8=0000000000000000 r9=00000001f55def60 r10=00000001f55defa0
r11=00000000106fcd20 r12=0000000000000000 r13=0000000000000002
r14=00000001f49c3860 r15=00000001f58c0040
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
The stack is:
# Child-SP RetAddr Call Site
00 00000000`106fcf40 000007fe`f30c1437 sqlmin!SetidentI2I4+0x1f3
01 00000000`106fd050 000007fe`f474e7ce sqlTsEs!CEsExec::GeneralEval4+0xe7
02 00000000`106fd120 000007fe`f470e6ef sqlmin!CQScanUpdateNew::GetRow+0x43d
03 00000000`106fd1d0 000007fe`f08ff517 sqlmin!CQueryScan::GetRow+0x81
04 00000000`106fd200 000007fe`f091cebe sqllang!CXStmtQuery::ErsqExecuteQuery+0x36d
05 00000000`106fd390 000007fe`f091ccb9 sqllang!CXStmtDML::XretDMLExecute+0x2ee
06 00000000`106fd480 000007fe`f08fa058 sqllang!CXStmtDML::XretExecute+0xad
07 00000000`106fd4b0 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
08 00000000`106fd5f0 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
09 00000000`106fd7e0 000007fe`f152cfaa sqllang!CSQLSource::Execute+0x86c
0a 00000000`106fd9b0 000007fe`f152c9e8 sqllang!CStmtExecProc::XretLocalExec+0x25a
0b 00000000`106fda30 000007fe`f152a1d8 sqllang!CStmtExecProc::XretExecExecute+0x4e8
0c 00000000`106fe1e0 000007fe`f08fa058 sqllang!CXStmtExecProc::XretExecute+0x38
0d 00000000`106fe220 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
0e 00000000`106fe360 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
0f 00000000`106fe550 000007fe`f0902267 sqllang!CSQLSource::Execute+0x86c
10 00000000`106fe720 000007fe`f0909087 sqllang!process_request+0xa57
11 00000000`106feee0 000007fe`f2bf49d0 sqllang!process_commands+0x4a3
12 00000000`106ff200 000007fe`f2bf47b4 sqldk!SOS_Task::Param::Execute+0x21e
13 00000000`106ff800 000007fe`f2bf45b6 sqldk!SOS_Scheduler::RunTask+0xa8
14 00000000`106ff870 000007fe`f2c136ff sqldk!SOS_Scheduler::ProcessTasks+0x279
15 00000000`106ff8f0 000007fe`f2c138f0 sqldk!SchedulerManager::WorkerEntryPoint+0x24c
16 00000000`106ff990 000007fe`f2c13246 sqldk!SystemThread::RunWorker+0x8f
17 00000000`106ff9c0 000007fe`f2c13558 sqldk!SystemThreadDispatcher::ProcessWorker+0x3ab
18 00000000`106ffa70 00000000`775d59ed sqldk!SchedulerManager::ThreadEntryPoint+0x226
19 00000000`106ffb10 00000000`7780c541 kernel32!BaseThreadInitThunk+0xd
1a 00000000`106ffb40 00000000`00000000 ntdll!RtlUserThreadStart+0x21
Unassembling the function:
000007fe`f4d8658e 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d86591 4533e4 xor r12d,r12d
000007fe`f4d86594 410fb7d5 movzx edx,r13w
000007fe`f4d86598 4533c9 xor r9d,r9d
000007fe`f4d8659b 4533c0 xor r8d,r8d
000007fe`f4d8659e 488bc8 mov rcx,rax
000007fe`f4d865a1 4489642420 mov dword ptr [rsp+20h],r12d
000007fe`f4d865a6 41ff5230 call qword ptr [r10+30h]
000007fe`f4d865aa 8b5597 mov edx,dword ptr [rbp-69h]
000007fe`f4d865ad 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d865b0 4489642438 mov dword ptr [rsp+38h],r12d
000007fe`f4d865b5 4489642430 mov dword ptr [rsp+30h],r12d
000007fe`f4d865ba 458d442401 lea r8d,[r12+1]
000007fe`f4d865bf 4533c9 xor r9d,r9d
000007fe`f4d865c2 488bc8 mov rcx,rax
000007fe`f4d865c5 c644242801 mov byte ptr [rsp+28h],1
000007fe`f4d865ca 4488642420 mov byte ptr [rsp+20h],r12b
000007fe`f4d865cf 41ff5250 call qword ptr [r10+50h]
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] <=================== AV happened over here
000007fe`f4d865d6 488bc8 mov rcx,rax
000007fe`f4d865d9 4c8bf0 mov r14,rax
000007fe`f4d865dc ff5268 call qword ptr [rdx+68h]
000007fe`f4d865df 488d55e7 lea rdx,[rbp-19h]
000007fe`f4d865e3 4c8b00 mov r8,qword ptr [rax]
000007fe`f4d865e6 488bc8 mov rcx,rax
000007fe`f4d865e9 41ff5010 call qword ptr [r8+10h]
000007fe`f4d865ed f6450a04 test byte ptr [rbp+0Ah],4
I remember few issues with scan2ident function, I am not sure if they have fixed it however it appears that this is intoduced to SQL 2014 and we need help from MS to get this resolved as it needs code analysis.
It is not getting simulated for other versions of SQL apart from SQL 2014.
Also to add, interestingly, the value of rax is not visibly changed and it was successfully passed on to rcx, which has a valid value, so something should have changed the value of rax inside call to function using call qword ptr [r10+50h], and looking at this
it appears that it might be a list of functions and we are going at particular offset [50h]. So, bottom line is that the call to function qword ptr [r10+50h], should be changing something in rax, and debugging/analyzing this code might give us some more idea. -
Hi All,
I am pulling data from SQL server(view) using WCF-SQL adapter, in DEV it's working fine and in test following is the error
I have checked the credentials and server name all are fine, But i couldn't figure out the issue.
Thanks in Advace
Recloc_WCFSQL
mssql://SQLSERVERTest/biztalkdb?InboundId=xyz
WCF-SQL
Microsoft.ServiceModel.Channels.Common.ConnectionException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing
a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo
serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer
timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString
connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection
owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout,
Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions
userOptions, DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal&
connection) at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1
retry) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.Adapters.Sql.SqlAdapterConnection.OpenConnection() --- End of inner exception stack trace --- at Microsoft.Adapters.Sql.SqlAdapterConnection.OpenConnection() at Microsoft.Adapters.Sql.ASDKConnection.Open(TimeSpan
timeout) at Microsoft.ServiceModel.Channels.Common.Design.ConnectionPool.GetConnection(Guid clientId, TimeSpan timeout) at Microsoft.ServiceModel.Channels.Common.Design.ConnectionPool.GetConnectionHandler[TConnectionHandler](Guid clientId, TimeSpan timeout,
MetadataLookup metadataLookup, String& connectionId) at Microsoft.ServiceModel.Channels.Common.Channels.AdapterChannelListener`1.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan
timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint.Enable()
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint..ctor(BizTalkEndpointContext endpointContext, IBTTransportProxy transportProxy, ControlledTermination control) at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiver`2.AddReceiveEndpoint(String url,
IPropertyBag adapterConfig, IPropertyBag bizTalkConfig)The first few things to check would be
Is TCP/IP Protocol enabled on the Test SQL Server Instance?
If it is configured is it running on the default port or a different port has been specified? In case a different port has been specified then your configuration URI should reflect that OR the SQLBrowser service needs to be running
The MS DTC configuration on the SQL Server need to have been configured with BOTH inbound/outbound enabled (Component Management - DTC)
The Windows Firewall on the BizTalk Server Test should be a) disabled or b) configured to permit connection to the SQL Server on either 1433 or the specific instance port.
Regards. -
SQL server connection error in sharepoint
We are getting below error with inetgrated security and custom DB sql server connection in sharepoint 2013.
This connectionstring works in dev with SQL username and password but in QA we are changing it to integrated authority.
<add name="OurConnectionString" connectionString="Data Source=OurDB;Initial Catalog=Catalogname;Integrated Security=SSPI" providerName="System.Data.SqlClient"> (This does not work in QA)
<add name="OurConnectionString" connectionString="Data Source=OurDB;Initial Catalog=Catalogname;User ID=user1;Password=ourpwd" providerName="System.Data.SqlClient" /> (This works in dev)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader
dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet
bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.S...
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.55* w3wp.exe (0x2434)
0x1EC0
Unknown
00000
Unexpected ...qlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnecti...
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.55* w3wp.exe (0x2434)
0x1EC0
Unknown
00000 Unexpected
...onString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool
pool, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnectionOptions userOptions) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbCon...
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.55* w3wp.exe (0x2434)
0x1EC0
Unknown
00000 Unexpected
...nectionOptions userOptions) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions,
DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFacto...
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.55* w3wp.exe (0x2434)
0x1EC0
Unknown
00000 Unexpected
...ry, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) at System.Data.SqlClient.SqlConnection.Open() at DBManager.ConnectionOpen()
c62c629c-6890-d0e5-d8a0-91d367f84202
12/20/2013 10:29:31.74 w3wp.exe (0x2434)
0x1EC0
SharePoint Foundation Claims Authentication
aebgg High
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint LeadHi,
According to your post, an error occurred when you connect SQL Server in SharePoint.
We can do as follows:
1. Try to replace Integrated Security=SSPI with Integrated Security=True
2. Check whether there is <identity impersonate="true" /> under <system.web> tag in web.config.
Here are two articles for you to take a look at:
http://blogs.windwardreports.com/tomasr/2010/09/login-failed-nt-authorityanonymous-logon-integrated-securitysspi-vs-integrated-securitytrue.html
http://www.layer2solutions.com/en/community/FAQs/BDLC/Pages/How-SharePoint-BDLC-used-with-integrated-security-trusted-connection.aspx
Best Regards
Dennis Guo
TechNet Community Support -
I got the below error message:
The description for Event ID ( 17055 ) in Source ( MSSQLSERVER ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display the messages from a remote computer. The following information
is part of the event: 18456, Login failed for user 'xxxxx_yyyyy'.
SQL Server version : Microsoft SQL Server 2000 - 8.00.2282 (Intel X86) Dec 30 2008 02:22:41 Copyright (c) 1988-2003 Microsoft Corporation Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
Experts kindly suggest if you would have come across the same scenario.
Yours
Mrvsfly
MRVSFLYAlso how to track the source ip address for this login
AFAIK it's not possible to get the information from SQL Server; you could only try to capture the failed logins with SQL Server Profiler.
See thread Capture information for failed logins
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Microsoft jdbc driver for sql server 2000 error
I try to connect to a sql server database;
After execution of:
C:\Sun\Creator\bin\runide.exe -cp:a =.;"C:\Programmi\Microsoft SQL Server 2000 Driver for JDBC\lib\msbase.jar";"C:\Programmi\Microsoft SQL Server 2000 Driver for JDBC\lib\msutil.jar";"C:\Programmi\Microsoft SQL Server 2000 Driver for JDBC\lib\mssqlserver.jar"
(where "programmi" is "Program Files" in Italian)
I can make a connection to sql server.
When I try to see the "tables" in database I have this error:
[Microsoft][SQLServer 2000 Driver for JDBC]Error setting up static cursor cache
I have tryed to found some resolution and I found only this:
http://forum.java.sun.com/thread.jsp?thread=444136&forum=48&message=2007122
Can you see if it apply on source of IDE and eventually correct?I'm using the new version and I can't update a row
satRowSet.setDataSourceName("java:comp/env/jdbc/Northwind");
satRowSet.setCommand("SELECT * FROM dbo.Sat");
satModel.setWrappedData(satRowSet);
satRowSet.setConcurrency(java.sql.ResultSet.CONCUR_UPDATABLE);
satRowSet.setHoldability(java.sql.ResultSet.HOLD_CURSORS_OVER_COMMIT);
satRowSet.setAutoCommit(true);
satRowSet.setReadOnly(false);
satRowSet.execute();
satRowSet.next();
try{
this.satRowSet.absolute(1);
this.satRowSet.updateRow();
} catch (Exception ex) {
this.textArea1.setValue(ex.getMessage());
ex.printStackTrace();
java.sql.SQLException: [Sun][SQLServer JDBC Driver]Invalid operation for the current cursor position.
at com.sun.sql.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.sun.sql.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.sun.sql.jdbc.base.BaseResultSet.validateCursorPosition(Unknown Source)
at com.sun.sql.jdbc.base.BaseResultSet.getString(Unknown Source)
at com.sun.sql.rowset.JdbcRowSetXImpl.getString(JdbcRowSetXImpl.java:842)
at com.sun.sql.rowset.JdbcRowSetXImpl.getString(JdbcRowSetXImpl.java:941)
at untitled.Page1.setFields(Page1.java:133)
at untitled.Page1.beforeRenderResponse(Page1.java:147)
at com.sun.jsfcl.app.FacesBean.beforePhase(FacesBean.java:227)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:192)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:102)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:192)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:261)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:215)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:191)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:180)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:582)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:254)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:161)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:979)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:692)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:647)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:691)
at java.lang.Thread.run(Thread.java:534) -
Installation of SCCM 2012 R2 and SQL Server 2014 error
Hello All,
I am attempting to setup SQL Server 2014 and SCCM 2012 R2 but I keep running into an error stating that "Configuration Manager requires Microsoft SQL Server
2008 SP2 w/ CU9........ all the way up to Microsoft SQL Server 2012 with CU2 or higher." I am using all evaluation versions for this configuration as we are looking to test and evaluate the products. I was trying it with SQL 2014 because I was running
into the same error with SQL 2012 and according to "http://blogs.technet.com/b/configmgrteam/archive/2015/03/30/updated-sc2012-configmgr-sp1-and-sc2012r2-configmgr-support-sql-server-2014.aspx" SQL
2014 is supported with SCCM 2012 R2. SQL is installed locally on the same box.
Any suggestions would be appreciated.
Thanks,
Tucker
Update: When running the Pre-Req check these are some of the failed returns.....
SQL Server Edition: Failed: Configuration Manager primary site and central administration site don't support SQL Server Express Edition
Not sure why it is recognizing SQL Express as this is a new machine.
SQL Server service running account: Failed: The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE. You must configure
the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
For the SQL Service I am using a domain account created specifically for this.This has nothing to do with moving or restoring. The kb article says "This hotfix provides updated versions of the setup files and enables new installations
of the System Center 2012 R2 Configuration Manager site database role and the System Center 2012 Configuration Manager SP1 site database role in Microsoft SQL Server 2014"
Torsten Meringer | http://www.mssccmfaq.de -
MS SQL Server Migration Errors
Attempting to migrate from a Microsoft SQL Server Database to a Oracle database, perform all requirements in the tutorial
<?xml version="1.0" encoding="windows-1252" standalone="no"?>
<log>
<record>
<date>2015-04-29T13:48:50</date>
<logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
<level>SEVERE</level>
<class>oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil</class>
<message>Capture
Enterprise Capture
Capture failed. Refer to MIGRLOG table in the repository for details</message>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doOnlineEnterpriseCapture(FullMigrateTask.java:758)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doCapture(FullMigrateTask.java:601)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doMaskBasedActions(FullMigrateTask.java:400)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:314)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:147)</param>
<param>oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)</param>
<param>java.util.concurrent.FutureTask.run(FutureTask.java:262)</param>
<param>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:554)</param>
<param>java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)</param>
<param>java.util.concurrent.FutureTask.run(FutureTask.java:262)</param>
<param>java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)</param>
<param>java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)</param>
<param>java.lang.Thread.run(Thread.java:745)</param>
<param>oracle.dbtools.migration.workbench.core.logging.LogInfo@8b1009a</param>
<exception>
<message>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask$FullMigrateTaskException: Capture
Enterprise Capture
Capture failed. Refer to MIGRLOG table in the repository for details</message>
<frame>
<class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
<line>758</line>
</frame>
<frame>
<class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
<line>601</line>
</frame>
<frame>
<class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
<line>400</line>
</frame>
<frame>
<class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
<line>314</line>
</frame>
<frame>
<class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
<line>147</line>
</frame>
<frame>
<class>oracle.dbtools.raptor.backgroundTask.RaptorTask</class>
<line>193</line>
</frame>
<frame>
<class>java.util.concurrent.FutureTask</class>
<line>262</line>
</frame>
<frame>
<class>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask</class>
<line>554</line>
</frame>
<frame>
<class>java.util.concurrent.Executors$RunnableAdapter</class>
<line>471</line>
</frame>
<frame>
<class>java.util.concurrent.FutureTask</class>
<line>262</line>
</frame>
<frame>
<class>java.util.concurrent.ThreadPoolExecutor</class>
<line>1145</line>
</frame>
<frame>
<class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
<line>615</line>
</frame>
<frame>
<class>java.lang.Thread</class>
<line>745</line>
</frame>
</exception>
</record>
<record>
<date>2015-04-29T13:48:50</date>
<logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
<level>WARNING</level>
<class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
<message>Error:ORA-06550: line 1, column 14:
PLS-00201: identifier 'SS2K5ALLPLATFORM.STAGECAPTURE' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
: FAILED : Database Migration : FAILED</message>
<param>oracle.dbtools.migration.workbench.core.logging.LogInfo@7b6bccbd</param>
</record>
Here is the log it printed out, unsure of what to do, research shows that maybe the user doesn't have enough privileges, or possibly we ran out of tablespace
we are running off of SQL Developer 4.0.3 and using jTDS Drivers 1.3.1 from sourceforgeSee Issue with migration DB from SQL Server 2012 to Oracle 11.2 using SQL Developer Migration workbench
The tutorial isn't as complete as the docs. Read the help/docs on creating the migration repository, and make sure all the proper privs have been granted. -
Sql Server 2014 - Error message: Failed to read BLOB column
Hi all,
Am experiencing this error in Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Enterprise Edition (Build 7601: Service Pack 1).
Error messages:
Message: Failed to read BLOB column
Stack: at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String
strWhereClause, Boolean useTableLockHint, Int32 bcpFileFormatVersion)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.BcpOutThreadProvider.DoWork(WorkItem workItem)
at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Please can you assist me on this issue.The error message states a communication link failure has occurred.
This is most likely a network related error and usually is transient.
Try to generate the snapshot again and see if the error still occurs. If the error still occurs, you will need to have a network admin check the links.
Brandon Williams (blog |
linkedin) -
we are constantly getting this error from event log: what is the remedy.
Unable to read local eventlog (the parameter is incorrect)Hi Madalo,
Did the issue resolved?
What's the version and service pack level of the SQL Server instance did you installed? Please try to install the latest service pack. You can download and install SQL Server service pack from the following link:
Update Center for Microsoft SQL Server
If the issue persists, please post the SQL Server error log for further analysis.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
OBIEE SQL Server username error
Hi Experts
Have installed OBIEE on my local machine.
Have set up a repository that has some SQL Server Data sources, and tried to access them through Answers. Within Answers I can see the tables I have set up in the presentation layer, but when I query them I get this error.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: 28000 code: 18456 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'MTRUST\CMP-001258$'.. (HY000)
It seems that it is using my computer name CMP-001258 to connect to SQL server which won't work - I believe it needs to use my username.
How do I tell it to use my username instead of the computer name to connect?We found the problem and the solution.
Solution was to change the server settings to log on as my login rather than as my machine.
To change your local servers to use your user id when accessing SQL Server through Answers:
1)Stop all servers. - Java Host, Presentation, BI, and OC4J.
2)Change server properties.
a.Start/Settings/Control Panel / Administrative Console / Servers
b.Double click on a server to open the properties panel
c.On the Log On tab, check 'This account:'
d.Use Browse to find your userid:
i.Change the location to 'entire directory'.
ii Enter your id in the object name field.
iii Click on Check Names to verify your id. If found the object name will populate
iv.Click OK.
e.Enter your Password and click OK.
3)Repeat steps A-E for the Java Server, the BI server, and the Presentation server.
4)Delete web/catalog associated with the RPD you are using. This is required to reset your userID within the webcat.
5)Start the servers in this order
a.Oracle BI Java Host
b.Oracle BI Server
c.Start the OC4J - Start / Programs / Oracle Business Intelligence / Start OC4J.
d.Oracle BI Presentation Services -
SQL SERVER 2014 Error :40
""A network-related or instance-specification error occured while establishing a connection to SQL Server "" Windows Firewall is on ! what should i do , or change to connect , please help , please
QUOTE from an article on the topic: "
Firstly,
Make sure your database engine is configured to accept remote connections
• Start > All Programs > SQL Server 2005 > Configuration Tools > SQL Server Surface Area Configuration • Click on Surface Area Configuration for Services and Connections • Select the instance that is having a problem > Database Engine >
Remote Connections • Enable local and remote connections • Restart instance - See more at:
http://www.sswug.org/articlesection/default.aspx?TargetID=44331#sthash.kzSfADZL.dpuf
Secondly,
You may need to create an exception on the firewall for the SQL Server instance and port you are using • Start > Run > Firewall.cpl • Click on exceptions tab • Add the sqlservr.exe (typically located in C:\Program Files (x86)\Microsoft
SQL Server\MSSQL.x\MSSQL\Binn, check your installs for the actual folder path), and port (default is 1433) • Check your connection string as well - See more at:
http://www.sswug.org/articlesection/default.aspx?TargetID=44331#sthash.kzSfADZL.dpuf
Thirdly Check if your SQL server services is up and running properly
Go to All Programs >> Microsoft SQL Server 2008 >> Configuration Tools >> SQL Server Configuration Manager >> SQL Server Services, and check if SQL Server service status is “Running”.
In addition, ensure that your remote server is in the same network. Run “sqlcmd -L” in your command prompt to ascertain if your server is included in your network list. You can even find tutorial for the same here SQL SERVER – Find All Servers From Local
Network – Using sqlcmd – Detect Installed SQL Server on Network.
Next Enable TCP/IP in SQL Server Configuration
Go to All Programs >> Microsoft SQL Server 2008 >> Configuration Tools >> SQL Server Configuration Manager >> Select TCP/IP. Right click and select enable
Lastly Go to your firewall setting, under exception tab, select add port include TCP:1433 and tick the SQL check box."
LINK:
http://stackoverflow.com/questions/18060667/connect-to-server-a-network-related-or-instance-specific-error
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012
Maybe you are looking for
-
Alright, lets say I'm watching a video on youtube. If I switch tabs, the video from youtube will appear in my top left screen and won't go away. Or if I go to any other site or program and try to open a file from my computer, the video will pop up in
-
Vendor number in General ledger
Hello team, we are in ECC 6.0 we need vendor number in general ledger report fagll03 in the layout of FAGLL03 it is available. but it is not updating the field with vendor number. how can i get. regards Sri
-
Form from hell (Flash Radio Buttons)
Does anyone have a bead out there on a behavior that you can use with the native Flash radio button groups in Director MX 2004. I am going freakin' bonkers trying to write a behavior for these things.
-
Hardware requirement for BPM Suite
Hi All, What are they Hardware requirements for Oracle BPM Suite. Regards Nasir
-
During writing for archiving object FI_MKKDOC, file is not getting created
Hi Experts, I am new to archiving concept & have one archiving object FI_MKKDOC which i have to complete as soon as possible. In this i have done all the basic settings & when i am excuting the transaction after putting production variant & schedulin