SQL server with Cold Fusion?

Hi everyone,
I am supposed to write a website, that its database is SQL
server and about 80,000 - 100,000 records in there.
is it OK to go with cold fusion? OR better to go with .NET
for faster and more reliable speed?
I would appreciate your help.

The app server generally doesn't care so long as it supports
the DB driver. If the database is designed properly, the DBMS will
be doing most of the "grunt" work.
Any enterprise level app server can process a large database,
so go with your strengths, and SQL server will do you just fine.
I also wouldn't say .NET is faster ... I've seen my share of
sites using .NET that are slow as molasses. Your server
configuration will determine that more often than the app server,
so long as it is an enterprise level app server ... both of which
.NET and CF are.
We run a SQL server for many clients and all are on CF ...
one table alone has over 250,000 records in it. What and how you
output will determine the speed between the 2, not how many records
it can handle.

Similar Messages

How to convert/download videos embedded with cold fusion?

Does anyone know of a free video conversion software that will convert and download online videos embedded with cold fusion ("cfmid=?") format/extension? I tried a few online sites and they do not support that format yet. Please help. Thank you so much!
Judy

Actually COLD FUSION was a hoax a few years ago. COLDFUSION is the app.
If you need content from a web site, talk to the developer.
fwiw - Since ColdFusion is an Adobe app, you should try asking your question on that forum. This one is here to primarily support Shake.
Have fun.
x

Sql server with multiple instance

hi All,
i want to install sql server with two instance and i want to assign two separate is ips for both default instance and named instance and both should work like
two different server
note: If i logged with one ip(default instance) it should show its own databases not both or named instance databases
thanks
chintala

Hi chintala,
According to your description, if you want to assign the two different IP to stand for default instance
and named instance, I recommend you set up aliases on a SQL Server with multiple instances. For example, a physical server is named WinServer and 2 instances of SQL Server named WinServer and WinServer\instance1.
We need to add 1 IP addresse to the WinServer, there is one IP address already assigned to WinServer, 192.168.1.1, by adding one new IP's, 192.168.1.2 .
We need to move into DNS to configure our host names and aliases. The physical machine must be steup as a static IP in DNS. SQLAlias1, which point to the default instance on WinServer, will be setup as a DNS with an address of 192.168.1.1.
SQLAlias2, which will point to WinServer\Instance1, will be setup as a new Host (A) record in DNS with an address of 192.168.1.2.
When everything has been completed on the DNS side, you need to open up SQL Server Configuration Manager on WinServer and configure the protocols for each instance one at a time, restart the 3 SQL services.
For more information about how to set up aliases on a SQL Server with multiple instances, you can review the similar article.
http://kevine323.blogspot.com/2013/08/setting-up-aliases-on-sql-server-with.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

SQL Server with BIDS install

Which version of SQL Server with BIDS is recommended for a starter? I keep on running in various problems when installing and uninstalling.

SQL Server 2014 is the latest SQL version and from SQL 2012, BIDS is replaced with SSDT(sql server data tools). refer: https://msdn.microsoft.com/library/cc645993.aspx?f=255&MSPPError=-2147217396
Express edition does not have this. but SQL 2014 'Express with advanced services' edition has it. i do not think full functionality is available though.
if you only want BIDS, you can install SQL 2008R2 express with advanced services edition. google for the link
this link is for SQL 2008 http://www.microsoft.com/en-us/download/details.aspx?id=1842
if this is for learning purpose, i would recommend installing sql 2014 enterprise evaluation edition. that way you can get full exposure to SQL product suite
Hope it Helps!!

Oracle equivalent for MS Sql Server WITH(NOLOCK)

Hi all :-)
What is the equivalent of MS Sql Server WITH(NOLOCK)
hint in Oracle ... or ... how can I achieve the same
effect in Oracle SELECT queries ?

= dirty read .
to the op : read the concepts guide before going further; Oracle implements a different concurrency model than SQL Server

How to migrate an existing Microsoft SSIS deployment if it is decided to replace SQL Server with an Oracle database?

Hi Oracle Gurus!
Currently, I am designing an ETL solution that transforms and loads a lot of data from flat files and sends it to an SQL Server 2008 R2 database for storage. However, at a future point of time, it may be decided to add or even replace SQL Server with an Oracle 11g database.
Currently, I am writing script transforms in C# to dynamically generate SSIS packages to tansform and load the data into SQL Server. But considering that in future, an Oracle 11g or 12c database might be added to, or replace the SQL Server database, how do I make my script transforms (or whatever else I am developing currently for SQL Server) reusable to the extent possible?
Or more precisely, what steps do I take, from an Oracle point of view, to ensure that any future migration of data to an Oracle database would be smooth to the extent possible?
Looking up to my Oracle Gurus for enlightenment in this matter!
Novice Kid

When you're writing your on C# code to load data into the SQL Server you have to modify the routines so that they will work with Oracle.
One approach is to use the extproc agent which would allow you to directly call external programs with all the logic in it to perform the load of your files and to put the data into the Oracle database. Another option would be to use utl_file package (or equivalents) which will allow you to open external files from your Oracle database and to directly read its content and then to pass it to the related tables.

Spry With Cold Fusion + Tutorials

Hi,
I want to try Spry with cold fusion . Can anyone help me on
getting some tutorials?

>
http://www.adobe.com/devnet/dreamweaver/articles/edit_data_in_ajax.html
A more advanced demo application, without tutorial, but with
more advanced
features, is now available here:
http://www.massimocorner.com/spry/dynamic_spry.zip
Massimo Foti, web-programmer for hire
Tools for ColdFusion and Dreamweaver developers:
http://www.massimocorner.com

How to connect MS-sql server with SAP BW

hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.

Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful...

What's happening with cold fusion?!

first, this very page is throwing js errors in both ie8 and firefox 24.0 , i can't reply to any posts
then, with all this flurry of security breaches on gov websites running cold fusion, do we have a comprehensive white paper showing how to plug all the security holes that were uncovered?

Thanks Carl,
when clicking the reply link on the forum, in ie8 i get:
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1;
Trident/4.0; (R1 1.6); .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
.NET4.0C; .NET4.0E; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729;
InfoPath.3)
Timestamp: Mon, 18 Nov 2013 15:26:45 UTC
Message: Not implemented
Line: 1616
Char: 13546
Code: 0
URI:
http://forums.adobe.com/4.5.6/resources/scripts/gen/220b1b06a29f901e1d24252ac800883e.js
and in fireFox:
ReferenceError: $ is not defined
https://www.adobe.com/account/sign-in.adobedotcom.html?returnURL=%2Fcfusion%2Fmembership%2 Findex%2Ecfm%3Floc%3Den%5Fus%26nl%3D1%26ref%3Dlogin
Line 70
ion amariutei | [email protected] | 212-578-1011
From:
Carl Von Stetten <[email protected]>
To:
ion <[email protected]>
Date:
11/18/2013 11:19 AM
Subject:
what's happening with cold fusion?!
Re: what's happening with cold fusion?!
created by Carl Von Stetten in Advanced Techniques - View the full
discussion
Site seems to be working fine for me. As to plugging security holes,
there are two things you need to do:
1. Keep your servers updated with the latest patch(es). If you are
on CF10, use the built-in automatic updater. If on CF8 or CF9, take a
look at David Epler's Unofficial Updater project.
2. Follow the appropriate ColdFusion lockdown guide for the version
you are running.
For CF9:
http://www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/910
25512-cf9-lockdownguide-wp-ue.pdf
For CF10:
http://www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1
0/cf10-lockdown-guide.pdf
-Carl V.
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in
the forum to embed the image at
http://forums.adobe.com/message/5851524#5851524
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/5851524#5851524]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/5851524#5851524]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Advanced Techniques at Adobe Community
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/thread/416458?tstart=0.
The information contained in this message may be CONFIDENTIAL and is for the intended addressee only. Any unauthorized use, dissemination of the information, or copying of this message is prohibited. If you are not the intended addressee, please notify the sender immediately and delete this message.

Deploy sql server with scvmm 2012 r2

Hello,
How to deploy SQL Server with scvmm such a way that I get a VM with OS+ SQL installed.
Is there way that i will get installed SQL with all feature to create new VM.
I have followed the steps as given links http://blog.islamgomaa.com/?p=236
I worked but when i have create a VM , still I need to installed SQL management Stdio manually for create DBs.

MSFT has also built SQL Server Service Templates that will do this for you - you download the template, add your OS disk, add the SQL install media and go.
Here is how to get the MSFT built templates:
http://blogs.technet.com/b/scvmm/archive/2013/11/04/using-the-service-models-web-platform-installer-gallery.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

SCCM central site and primary site use the same SQL SERVER with two Instance.

Hi Guys,
I want deploy SCCM 2012 central site and primary site in my domain. But Only one Sql server for me. Any one can tell me how to install the central site server and primary site server with the same SQL SERVER with two instance.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community Support

Although you can install like the configuration you said above, we do not recommend you do it this way. If your SQL box has problems, all the data will go away and you will not have data redundancy.
You need to configure the different SQL Port and SQL Broke service port e.g.
SQL port 4023 SQL Broke Service port 4022 for CAS instance
SQL port 4024 SQL Broke Service port 4021 for PRI instance
Juke Chou
TechNet Community Support
I agree with Johan and this configuration should not be used. But I want to clarify that the default ports for "SQL port" (actually, SQL over TCP) is 1433 and the SQL Broker Service uses 4022. The configuration above should work but the "correct" would be
to use 1433 and 4022 for the CAS and 10434 and 4023 for the Primary :)
You can read more about Network Ports used by Configuration Manager here
http://technet.microsoft.com/en-us/library/hh427328.aspx#BKMK_CommunicationPorts
/Tim
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

SQL Server 2008/2008 R2 compatiblity with Cold Fusion 5.0

Our Cold Fusion Server is on Version 5.0 and database server is running SQL 2000. DBA's like to upgrade SQL Server to 2008/ R2. Is there any known issues in running or upgrading from Cold Fusion 5.0 with SQL Server 2008/R2 ?
Please let me know.
Thanks
Suresh Kumar

If you're looking at spending thousands on a SQL licence, has no-one considered buying a CF9 license? You'd save yourself a whole world of pain, and could then have a full 64-bit environment for your application which is tried and tested.

Xp pro config question with cold fusion(newbie)

Hello,
I'm a beginner and I want to learn studio mx 2004.In trying
to learn Macromedia MX for windows ,I've gone thru the installation
process in the manual for installing Cold Fusion for the server
side of things.My question is, I'm not sure if IIS is mnadatory in
order to use cold fusion.Is it a case of using one or the other or
is the IIS service required to run Cold Fusion? Also im using cold
fusion5 is cold fusion mx = to cold fusion 6.1?

Thanks for answering. Is there any benefits to running both
servers? I
don't want to confuse myself with too many
options.Essentially,I could
learn Dreamweaver (my ultimate goal) by using either
installation.
No, while it is possible to run multiple versions of CF, it
takes extra
configurations to do so. I would say this is unnecessary for
just
learning. I would strongly suggest upgrading. CF 5 is the
oldest and
most limited version of CF still officially supported by
Adobe. The
latest version is 7.0.2. There is a huge, major, complete
rewrite of CF
and many other bug fixes and enhancements between CF 5.x and
the current
version.
The current version and all versions of CF are free for
download from
Adobe for a personal development copy. If you do so now,
before you
start writing code, the upgrade install IIRC is quite
painless and will
use the configurations you have already chosen.

Problems with Cold Fusion Forms

Hey Everybody -
Pretty new to these forums and cold fusion in general. I
created a number of forms in cold fusion for a school. They sign up
for classes and when they fill out ALL text fields they
successfully submit the form and they see a success page. Sounds
great right? well kind of.
If a user doesnt fill out the entire form, and submits it
gives them an error with coldfusion errors. So I am faced with a
few choices. I can either: have the form forward them to an error
page instead of the coldfusion error, or if there's a way I can
fill in the null values so that there isnt a problem with nulls. I
want to have validation but I want it in a seperate page since I
dont have the room to add errors in the form itself.
Any help would be great. Thanks in advance.

I always do ALL my form validations with a client-side JS
**and** with server-side CF.
I don't use <cfform>, I know <cfform> is
dependant on the java version the user has installed on their end.
I know I came across quite a few issues where on one machine the
<cfform> worked fine, and on another it konked out.
Anways, this is one of my most basic forms:
=============================================
PAGE1.cfm
<html>
<head>
<script>
function validate() {
var IA = document.ContactUs;
var errorMSG = "";
if(IA.FullName.value == "") {errorMSG += "Full Name\n";}
if(IA.Email.value == "") {errorMSG += "Email\n";}
if(errorMSG != "") {
alert("The following fields are required:\n\n" + errorMSG);
return false;
</script>
</head>
<body>
<form name="ContactUs" action="page1_x.cfm" method="post"
onSubmit="return validate();">
<table>
<tr>
<td align="right">Name: </td>
<td align="left"><input type="text" name="FullName"
maxlength="50" size="25"></td>
</tr>
<tr>
<td align="right">Email Address: </td>
<td align="left"><input type="text" name="Email"
maxlength="50" size="25"></td>
</tr>
<tr>
<td align="right">Comments: </td>
<td align="left"><textarea name="Comments"
cols="20" rows="5" id="comments"></textarea></td>
</tr>
<tr>
<td colspan="2">
<input type="submit" name="SubmitContact"
value="Submit">
<input type="reset" name="Reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
=============================================
=============================================
page1_x.cfm
<cfif isdefined("FORM.SubmitContact") and FORM.FullName
NEQ "" and FORM.Email NEQ "">

<cfelse>

<cflocation url="page1.cfm?status=1" addtoken="no">
</cfif>
=============================================
Now, there is sooooo much more you can here for a full blown
error-proof script. You can also check if the e-mail is a valid
e-mail (server side), and if the field is a numeric field (like zip
code, phone number, etc) then check if that field is valid, etc.
This is just a run-of-mill simple form and validation
submission using both client-side JS and server-side code.

Accessing MS Sql Server with Java classes - problem connecting to socket

I found an example at this location which uses java classes to connected to MS Sql Server.
http://search400.techtarget.com/tip/1,289483,sid3_gci1065992,00.html
--bummer - it is a login location - so I will include the article
Anyway, the example is using Websphere, but I am still on Jbuilder (will get wsad soon). So I planted the classes from the example in
C:\Borland\JBuilder\jkd1.4\jre\lib\ext\...the classes
Then I copied the code from the example to my jpx project and got an error that it could not connect to the socket. The only thing I changed in the code was the connection string:
--original string from example:
Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://1433", "");
I was getting an error with the 2 argument version of DriverManager - and the second argument here was empty (properties argument). Here was my connection string:
Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://Myserver:1433;User=sa;Password=");
I am only using the 1 argument version of DriverManager. Note that the password=" is blank because my RnD workstation is standalone - no one accesses the sql server except me - so no password. I also left out the last semicolon I noticed. Any suggestions appreciated how I could fix this.
Thanks
source of article:
http://search400.techtarget.com/tip/1,289483,sid3_gci1065992,00.html
iSeries 400 Tips:
TIPS & NEWSLETTERS TOPICS SUBMIT A TIP HALL OF FAME
Search for: in All Tips All search400 Full TargetSearch with Google
PROGRAMMER
Sample code: Accessing MS SQL Server database from the iSeries
Eitan Rosenberg
09 Mar 2005
Rating: --- (out of 5)
Nowadays with the help of Java the iSeries can be integrated with other databases quite easy. This tip shows you how. The code included here uses the free Microsoft driver that can be downloaded from here. (SQL Server 2000 Driver for JDBC Service Pack 3)
If your SQL server does not include the Northwind Sample Database you can find it here.
http://www.microsoft.com/downloads/details.aspx?familyid=07287b11-0502-461a-b138-2aa54bfdc03a&displaylang=en
The download contains the following files:
msbase.jar
mssqlserver.jar
msutil.jar
Those files needs to be copied to the iSeries directories (/home/r_eitan/ExternalJARs).
Here's the directory structure (on the iSeries) for this sample:
/home/r_eitan/ExternalJARs - Microsoft files (msbase.jar,mssqlserver.jar,msutil.jar)
/home/r_eitan/JdbcTest02 - My code (Main.java,Main.class)
The Java code
import java.sql.*;
import java.io.*;
class Main {
* Connect to Microsoft SQL server and download file northWind.products as tab
* seperated file. (products.txt)
public static void main(String args[]) {
try {
PrintStream outPut = new PrintStream(new BufferedOutputStream(new FileOutputStream("products.txt")));
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
//Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://1433", "");
Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://Myserver:1433;User=sa;Password=");
System.out.println("Connection Done");
connection.setCatalog("northWind");
String sqlCmdString = "select * from products";
Statement statement = connection.createStatement();
ResultSet resultSet = statement.executeQuery(sqlCmdString);
ResultSetMetaData resultSetMetaData = resultSet.getMetaData();
int columnCount = resultSetMetaData.getColumnCount();
// Iterate throught the rows in resultSet and
// output the columns for each row.
while (resultSet.next()) {
for (int index = 1; index <=columnCount; ++index)
String value;
switch(resultSetMetaData.getColumnType(index))
case 2 :
case 3 :
value = resultSet.getString(index);
break;
default :
value = """ + resultSet.getString(index) + """;
break;
outPut.print(value + (index < columnCount ? "t" : ""));
outPut.println();
outPut.close();
resultSet.close();
connection.close();
System.out.println("Done");
catch (SQLException exception)
exception.printStackTrace();
catch (Exception exception)
exception.printStackTrace();
--------------------------------------------------------------------------------------------------

My guess is that the server's host name isn't right. It necessarily (or even usually) the "windows name" of the computer. Try with the numeric IP address instead (type "ipconfig" to see it).
First aid check list for "connection refused":
- Check host name in connect string.
- Check port number in connect string.
- Try numeric IP address of server host in connect string, in case name server is hosed.
- Are there any firewalls between client and server blocking the port.
- Check that the db server is running.
- Check that the db server is listening to the port. On the server, try: "telnet localhost the-port-number". Or "netstat -an", there should be a listening entry for the port.
- Try "telnet serverhost the-port-number" from the client, to see if firewalls are blocking it.
- If "telnet" fails: try it with the numeric ip address.
- If "telnet" fails: does it fail immediately or after an obvious timeout? How long is the timeout?
- Does the server respond to "ping serverhost" or "telnet serverhost" or "ssh serverhost"?

SQL server with Cold Fusion?

Similar Messages

Maybe you are looking for