SQL SSRS 2008 DateTime Calendar Control and Oracle 10g Data Source

Hello. I am creating reports in SSRS 2008 using the calendar control for a date range. Let's say we select a start date of 3/3/2012. This parameter is sent into my SQL statement in the WHERE clause which is executed against an Oracle 10g database. All syntax has to be in SQL that Oracle understands, so no CONVERT or CAST.
The format of the date is throwing an error "ORA-01843: not a valid month" when I try to use the following:
SELECT *
FROM TABLE
WHERE STARTDATE >= TO_DATE('3/03/2012', 'MM/DD/YYYY')
I get ORA-01722: invalid number when I try the following:
SELECT *
FROM TABLE
WHERE STARTDATE >= >= TO_CHAR('3/03/2012', 'MM/DD/YYYY')
I cannot find a way to format the date parameter in SQL Server SSRS before it gets to the SQL to be executed in Oracle.
Please help.
Thanks,
Sunny

920616 wrote:
sb92075: I am showing you how Oracle renders the date if I do a simple select from the table from which I am trying to pull data. You are right, it sure doesn't prove anything other than how the date looks right out of the Oracle database, but hopefully, it will give a clue as to how I need my SSRS date parameter to work.
Hans Forbrich:
I get ORA-01722: invalid number when I try the following:
SELECT *
FROM TABLE
WHERE STARTDATE >= TO_CHAR('3/03/2012', 'MM/DD/YYYY')
Solomon:
It works. The problem is getting the parameter '3/3/2012' into a usable format for Oracle.
Let's assume an application is sending in '3/3/2012' which will be used in an Oracle query (no PL/SQL allowed, nor can I create functions, stored procedures, etc - only straight up SQL). How can I prepare the parameter to successfully do the compare on the Oracle Date field?
12:50:23 SQL> select TO_CHAR('03/03/2012', 'MM/DD/YYYY') from dual;
select TO_CHAR('03/03/2012', 'MM/DD/YYYY') from dual
ERROR at line 1:
ORA-01722: invalid number
12:51:00 SQL> ed
Wrote file afiedt.buf
  1* select TO_DATE('03/03/2012', 'MM/DD/YYYY') from dual
12:51:20 SQL> /
TO_DATE('03/03/2012
2012-03-03 00:00:00

Similar Messages

  • SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

    SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
    So consider using IE as workaround.
    Also please refer:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
    Workaround here:
    http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
    -Vaibhav Chaudhari

  • Ssrs 2008 r2 obtain today and yesterday's date

    In an SSRS 2008 r2 report, I want to set the default value  to yesterday's date in a parameter called startdate. In a parameter called enddate, I want to set the default parameter value to todays date.
    I have tried the following to set the default values:
    =today()
    and
    =DateAdd("d".-1.today()).
    The above does not work.
    Thus would you let me know how to set the default parameter values of start date to yesterday's date and the enddate to today's date?

    Why it didnt work? what did it give you? Its working fine for me
    Are you trying to strip off time part?
    if yes try like
    =Today().ToString("mm/dd/yyyy")
    or whatever format you want
    similarly
    =DATEADD(DateInterval.Day,-1,Today()).ToString("mm/dd/yyyy")
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g dat

    I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g database. So, i have installed both databases on different pc's on windows platform. MS SQL Server 2005 on windows XP and Oracle 10g on windows 2003.
    I have configure Golden Gate step by step by following oracle guideline:
    http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
    When i run following command on target (oracle 10g):
    replicat paramfile dirprm/inload.prm
    I encounterd following error:
    2012-05-21 20:27:06 ERROR OGG-00014 Unrecognized parameter: USERID. Paramete
    r could be misspelled or unsupported.
    2012-05-21 20:27:06 ERROR OGG-01668 PROCESS ABENDING.
    My INLOAD FILE Content are:
    SPECIALRUN
    END RUNTIME
    USERID gg_user, PASSWORD welcome1
    EXTFILE D:\oracle\gg\dirdat\ex
    SOURCEDEFS D:\oracle\gg\dirdef\emp.def
    MAP hrschema.emp, TARGET gg_user.emp;
    Can you plz suggest me that where i am wrong?
    Thanks advance to all experts.

    amardeep.sidhu wrote:
    That should work, just in case try adding DBLOGIN before USERID
    DBLOGIN USERID x..No needed in the param file i think.its not needed at all you are right, but what else could it be? Besides any special unseen character :P

  • Is there any difference in Oracle 9i SQL Loader and Oracle 10g SQL Loader

    Hi
    Can anyone tell me whether is there any difference in Oracle 9i SQL Loader and Oracle 10g SQL Loader?
    I am upgrading the 9i db to 10g and wanted to run the 9i SQL Loader control files on upgraded 10g db. So please let me know is there any difference which I need to consider any modifications in the control files..
    Thank you in advance
    Adi

    answered

  • Upgrade DTSX packages from VS 2010 with SQL Server 2008 to VS 2013 and SQL Server 2014

    Hello everyone,
    I’m very new to SSIS world. I’ve been assigned a task to upgrade the existing packages running in VS 2010 with SQL Server 2008 to VS 2013 and SQL Server 2014. And then submit the migration report to my client.
    On very quick search at Google, I've found the following link. It seems like I just need to open the existing SSIS project in VS 2013 and follow the wizard.
    https://msdn.microsoft.com/en-us/library/cc280547.aspx
    Can anybody please advise, are there any other things need to be taken care while doing this up gradation process?
    Please share your experience.
    Any help would be much appreciated.
    Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

    Hello Arthur,
    Thank you for the response.
    I just got an access of the packages. They are of VS 2008 and not 2010.
    Do you know how to upgrade VS 2008 packaged to VS 2013?
    When I tried to open the solution file in VS 2013, it says "incompatible".
    Any help would be much appreciated.
    Thanks,
    Ankit
    Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

  • Unsupport feature SQL exception ---JDK1.4 and oracle 10g driver

    here there,
    I got the unsupport feature SQLexeption, does anybody have any idea? JDK1.4 and oracle 10g driver should fully support JDBC 3.0. Am I right ?
    Thank you very much
    Avni
    here is my snippet code,
    Connection con = DriverManager.getConnection(url, user, password);
              DatabaseMetaData data = con.getMetaData();
              int jdbcVersion = data.getJDBCMajorVersion();
    and here is the exception,
    java.sql.SQLException: Unsupported feature
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
         at oracle.jdbc.dbaccess.DBError.throwUnsupportedFeatureSqlException(DBError.java:690)
         at oracle.jdbc.OracleDatabaseMetaData.getJDBCMajorVersion(OracleDatabaseMetaData.java:4061)
         at com.sbc.jdbc.ConnectionVersion.<init>(ConnectionVersion.java:36)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:80)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:44)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:315)
         at org.eclipse.ve.internal.java.vce.launcher.remotevm.JavaBeansLauncher.main(JavaBeansLauncher.java:93)

    Avni,
    Works for me with Oracle 10g database, "ojdbc14.jar" JDBC driver (latest version -- 10.2.0.1.0 -- downloaded from OTN) and JDK 1.4.2_07:
    conn = ods.getConnection();  // Using 'OracleDataSource'
    DatabaseMetaData dbmd = conn.getMetaData();
    System.out.println("JDBC Major Version: " + dbmd.getJDBCMajorVersion());Above code prints out:
    JDBC Major Version: 10Good Luck,
    Avi.

  • We have plan to windows 2008 server ECC5(is reatil) oracle 10G.

    Dear all
    Presently we are using winwos 2003 server enter prize edition ,ECC5(is
    retails), oracle 9.2.0.7.
    we have plan to windows 2008 server ECC5(is reatil) oracle 10G.
    Is windows 2008 suported to the ECC5 (is-Reatail) and oracle 10G .
    if supported please advise windows 2003 server is better or windos 2008 server  better .
    Thanks
    Edited by: Venkat Ramesh on Aug 18, 2008 9:47 AM

    ECC 5 is based on kernel 6.40 which is not (yet) released for Windows 2008.
    See also note 1054740 - SAP System Installation on Windows Server 2008
    I would recommend installing on Windows 2003 and later upgrade your system to Windows 2008 when kernel 6.40 is available.
    Markus

  • PHP 5.1.4 and Oracle 10G XE ?

    I am using PHP 5.1.4 with OCI8.dll module, and Oracle 10G XE. My question is how to Edit and Delete Record in my table using PHP syntax ?.
    Best Regards,
    /Harso Adjie.

    You use SQL syntax not PHP syntax to UPDATE / DELETE the records and run the query in a similar manner to SELECT statements:
    Parse your Oracle statement: oci_parse()
    Execute your Oracle statement: oci_execute()
    (You will need to commit transaction if not using auto-commit) Commit your transaction: oci_commit()
    http://uk.php.net/manual/en/ref.oci8.php

  • How to connect mysql and oracle 10g by UTL_HTTP?

    how to connect mysql 5.0 and oracle 10g r2 by UTL_HTTP?what to do for this url connection exactly?

    cant i change anything to stup a link?
    SQL> desc utl_http
    PROCEDURE ADD_COOKIES
    Argument Name               Type               In/Out Default?
    COOKIES               TABLE OF RECORD      IN
    FUNCTION BEGIN_REQUEST RETURNS RECORD
    Argument Name               Type               In/Out Default?
       URL                    VARCHAR2(32767)      OUT
       METHOD               VARCHAR2(64)          OUT
       HTTP_VERSION           VARCHAR2(64)          OUT
       PRIVATE_HNDL           BINARY_INTEGER          OUT
    URL                    VARCHAR2          IN
    METHOD                VARCHAR2          IN     DEFAULT
    HTTP_VERSION               VARCHAR2          IN     DEFAULT
    PROCEDURE CLEAR_COOKIES
    PROCEDURE CLOSE_PERSISTENT_CONN
    Argument Name               Type               In/Out Default?
    CONN                    RECORD               IN
       HOST                VARCHAR2(256)          IN
       PORT                BINARY_INTEGER          IN
       PROXY_HOST               VARCHAR2(256)          IN
       PROXY_PORT               BINARY_INTEGER          IN
       SSL                    BOOLEAN           IN
    PROCEDURE CLOSE_PERSISTENT_CONNS
    Argument Name               Type               In/Out Default?
    HOST                    VARCHAR2          IN     DEFAULT
    PORT                    BINARY_INTEGER          IN     DEFAULT
    PROXY_HOST               VARCHAR2          IN     DEFAULT
    PROXY_PORT               BINARY_INTEGER          IN     DEFAULT
    SSL                    BOOLEAN           IN     DEFAULT
    PROCEDURE END_REQUEST
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    PROCEDURE END_RESPONSE
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       STATUS_CODE               BINARY_INTEGER          IN/OUT
       REASON_PHRASE          VARCHAR2(256)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    PROCEDURE GET_AUTHENTICATION
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       STATUS_CODE               BINARY_INTEGER          IN/OUT
       REASON_PHRASE          VARCHAR2(256)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    SCHEME                VARCHAR2          OUT
    REALM                    VARCHAR2          OUT
    FOR_PROXY               BOOLEAN           IN     DEFAULT
    PROCEDURE GET_BODY_CHARSET
    Argument Name               Type               In/Out Default?
    CHARSET               VARCHAR2          OUT
    FUNCTION GET_BODY_CHARSET RETURNS VARCHAR2
    PROCEDURE GET_COOKIES
    Argument Name               Type               In/Out Default?
    COOKIES               TABLE OF RECORD      IN/OUT
    FUNCTION GET_COOKIE_COUNT RETURNS BINARY_INTEGER
    PROCEDURE GET_COOKIE_SUPPORT
    Argument Name               Type               In/Out Default?
    ENABLE                BOOLEAN           OUT
    MAX_COOKIES               BINARY_INTEGER          OUT
    MAX_COOKIES_PER_SITE          BINARY_INTEGER          OUT
    PROCEDURE GET_DETAILED_EXCP_SUPPORT
    Argument Name               Type               In/Out Default?
    ENABLE                BOOLEAN           OUT
    FUNCTION GET_DETAILED_SQLCODE RETURNS BINARY_INTEGER
    FUNCTION GET_DETAILED_SQLERRM RETURNS VARCHAR2
    PROCEDURE GET_FOLLOW_REDIRECT
    Argument Name               Type               In/Out Default?
    MAX_REDIRECTS               BINARY_INTEGER          OUT
    PROCEDURE GET_HEADER
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       STATUS_CODE               BINARY_INTEGER          IN/OUT
       REASON_PHRASE          VARCHAR2(256)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    N                    BINARY_INTEGER          IN
    NAME                    VARCHAR2          OUT
    VALUE                    VARCHAR2          OUT
    PROCEDURE GET_HEADER_BY_NAME
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       STATUS_CODE               BINARY_INTEGER          IN/OUT
       REASON_PHRASE          VARCHAR2(256)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    NAME                    VARCHAR2          IN
    VALUE                    VARCHAR2          OUT
    N                    BINARY_INTEGER          IN     DEFAULT
    FUNCTION GET_HEADER_COUNT RETURNS BINARY_INTEGER
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       STATUS_CODE               BINARY_INTEGER          IN/OUT
       REASON_PHRASE          VARCHAR2(256)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    PROCEDURE GET_PERSISTENT_CONNS
    Argument Name               Type               In/Out Default?
    CONNECTIONS               TABLE OF RECORD      IN/OUT
    FUNCTION GET_PERSISTENT_CONN_COUNT RETURNS BINARY_INTEGER
    PROCEDURE GET_PERSISTENT_CONN_SUPPORT
    Argument Name               Type               In/Out Default?
    ENABLE                BOOLEAN           OUT
    MAX_CONNS               BINARY_INTEGER          OUT
    PROCEDURE GET_PROXY
    Argument Name               Type               In/Out Default?
    PROXY                    VARCHAR2          OUT
    NO_PROXY_DOMAINS          VARCHAR2          OUT
    FUNCTION GET_RESPONSE RETURNS RECORD
    Argument Name               Type               In/Out Default?
       STATUS_CODE               BINARY_INTEGER          OUT
       REASON_PHRASE          VARCHAR2(256)          OUT
       HTTP_VERSION           VARCHAR2(64)          OUT
       PRIVATE_HNDL           BINARY_INTEGER          OUT
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    RETURN_INFO_RESPONSE          BOOLEAN           IN     DEFAULT
    PROCEDURE GET_RESPONSE_ERROR_CHECK
    Argument Name               Type               In/Out Default?
    ENABLE                BOOLEAN           OUT
    PROCEDURE GET_TRANSFER_TIMEOUT
    Argument Name               Type               In/Out Default?
    TIMEOUT               BINARY_INTEGER          OUT
    PROCEDURE READ_LINE
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       STATUS_CODE               BINARY_INTEGER          IN/OUT
       REASON_PHRASE          VARCHAR2(256)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    DATA                    VARCHAR2          OUT
    REMOVE_CRLF               BOOLEAN           IN     DEFAULT
    PROCEDURE READ_RAW
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       STATUS_CODE               BINARY_INTEGER          IN/OUT
       REASON_PHRASE          VARCHAR2(256)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    DATA                    RAW               OUT
    LEN                    BINARY_INTEGER          IN     DEFAULT
    PROCEDURE READ_TEXT
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       STATUS_CODE               BINARY_INTEGER          IN/OUT
       REASON_PHRASE          VARCHAR2(256)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    DATA                    VARCHAR2          OUT
    LEN                    BINARY_INTEGER          IN     DEFAULT
    FUNCTION REQUEST RETURNS VARCHAR2
    Argument Name               Type               In/Out Default?
    URL                    VARCHAR2          IN
    PROXY                    VARCHAR2          IN     DEFAULT
    WALLET_PATH               VARCHAR2          IN     DEFAULT
    WALLET_PASSWORD          VARCHAR2          IN     DEFAULT
    FUNCTION REQUEST_PIECES RETURNS TABLE OF VARCHAR2(2000)
    Argument Name               Type               In/Out Default?
    URL                    VARCHAR2          IN
    MAX_PIECES               BINARY_INTEGER          IN     DEFAULT
    PROXY                    VARCHAR2          IN     DEFAULT
    WALLET_PATH               VARCHAR2          IN     DEFAULT
    WALLET_PASSWORD          VARCHAR2          IN     DEFAULT
    PROCEDURE SET_AUTHENTICATION
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    USERNAME               VARCHAR2          IN
    PASSWORD               VARCHAR2          IN     DEFAULT
    SCHEME                VARCHAR2          IN     DEFAULT
    FOR_PROXY               BOOLEAN           IN     DEFAULT
    PROCEDURE SET_BODY_CHARSET
    Argument Name               Type               In/Out Default?
    CHARSET               VARCHAR2          IN     DEFAULT
    PROCEDURE SET_BODY_CHARSET
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    CHARSET               VARCHAR2          IN     DEFAULT
    PROCEDURE SET_BODY_CHARSET
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       STATUS_CODE               BINARY_INTEGER          IN/OUT
       REASON_PHRASE          VARCHAR2(256)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    CHARSET               VARCHAR2          IN     DEFAULT
    PROCEDURE SET_COOKIE_SUPPORT
    Argument Name               Type               In/Out Default?
    ENABLE                BOOLEAN           IN
    MAX_COOKIES               BINARY_INTEGER          IN     DEFAULT
    MAX_COOKIES_PER_SITE          BINARY_INTEGER          IN     DEFAULT
    PROCEDURE SET_COOKIE_SUPPORT
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    ENABLE                BOOLEAN           IN     DEFAULT
    PROCEDURE SET_DETAILED_EXCP_SUPPORT
    Argument Name               Type               In/Out Default?
    ENABLE                BOOLEAN           IN     DEFAULT
    PROCEDURE SET_FOLLOW_REDIRECT
    Argument Name               Type               In/Out Default?
    MAX_REDIRECTS               BINARY_INTEGER          IN     DEFAULT
    PROCEDURE SET_FOLLOW_REDIRECT
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    MAX_REDIRECTS               BINARY_INTEGER          IN     DEFAULT
    PROCEDURE SET_HEADER
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    NAME                    VARCHAR2          IN
    VALUE                    VARCHAR2          IN     DEFAULT
    PROCEDURE SET_PERSISTENT_CONN_SUPPORT
    Argument Name               Type               In/Out Default?
    ENABLE                BOOLEAN           IN
    MAX_CONNS               BINARY_INTEGER          IN     DEFAULT
    PROCEDURE SET_PERSISTENT_CONN_SUPPORT
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    ENABLE                BOOLEAN           IN     DEFAULT
    PROCEDURE SET_PROXY
    Argument Name               Type               In/Out Default?
    PROXY                    VARCHAR2          IN
    NO_PROXY_DOMAINS          VARCHAR2          IN     DEFAULT
    PROCEDURE SET_RESPONSE_ERROR_CHECK
    Argument Name               Type               In/Out Default?
    ENABLE                BOOLEAN           IN     DEFAULT
    PROCEDURE SET_TRANSFER_TIMEOUT
    Argument Name               Type               In/Out Default?
    TIMEOUT               BINARY_INTEGER          IN     DEFAULT
    PROCEDURE SET_TRANSFER_TIMEOUT
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    TIMEOUT               BINARY_INTEGER          IN     DEFAULT
    PROCEDURE SET_WALLET
    Argument Name               Type               In/Out Default?
    PATH                    VARCHAR2          IN
    PASSWORD               VARCHAR2          IN     DEFAULT
    PROCEDURE WRITE_LINE
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    DATA                    VARCHAR2          IN
    PROCEDURE WRITE_RAW
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    DATA                    RAW               IN
    PROCEDURE WRITE_TEXT
    Argument Name               Type               In/Out Default?
    R                    RECORD               IN/OUT
       URL                    VARCHAR2(32767)      IN/OUT
       METHOD               VARCHAR2(64)          IN/OUT
       HTTP_VERSION           VARCHAR2(64)          IN/OUT
       PRIVATE_HNDL           BINARY_INTEGER          IN/OUT
    DATA                    VARCHAR2          IN

  • Oracle Streams b/w MS-Access 2007 and Oracle 10g.

    Can we set up Oracle Streams between MS-Access 2007 and Oracle 10g? Ms-Access as source and Oracle 10g as destination database. If so, can any one please give me little heads up with supported doc's or any source of info.

    Help Help....!!!

  • How to insert row in table control and save the data in tables

    Hi,
    I have one table control i am displaying data into table control ,
    my problem is : i want to display data into read mode in table control.
    but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
    please give me solution
    main problen is  how can know inserted line in table control and pass that data into ztable.

    Hi,
    Follow the below logic,
    PROCESS BEFORE OUTPUT.
      MODULE STATUS_0001.
      MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in 
                                                                          ITAB
      LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
           WITH CONTROL CTRL_LP_D516
           CURSOR CTRL_LP_D516-CURRENT_LINE.
      The following module moves data to control
        MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
      ENDLOOP.
    PROCESS AFTER INPUT.
      LOOP AT GT_CTRL_LP_D516.
      ENDLOOP.
      MODULE EXIT AT EXIT-COMMAND.
      MODULE USER_COMMAND_0001.  --> Here you have to take out the values from table control and update database table
    Reward points if helpful.
    Thanks and regards,
    Mallareddy Rayapureddy,
    Munich, Germany.

  • Using Clob with TopLink 9.0.4.5 and Oracle 10g RAC

    I am trying to store an XML file in a Clob type field of a DB table using TopLink 9.0.4.5 and Oracle 10g RAC and need some guidance about how to do it. I got some directions to start it with the Tip "How-To: Map Large Objects (LOBs) to Oracle Databases with OracleAS TopLink" but still need some more helps.
    When using the Oracle JDBC OCI driver, the tip gives the code block for a Clob field:
    DirectToField scriptMapping = new DirectToField();
    scriptMapping.setAttributeName("script");
    scriptMapping.setFieldName("IMAGE.SCRIPT");
    descriptor.addMapping(scriptMapping);
    As I understand, TopLink creates instances of the Descriptor class at run time for each of the descriptor files and stores them in a database session, where is the proper place (in SessionEvent of TopLinkSessionEventHandler?) for me to get a reference to such an instance of my Descriptor class in Java code so that I can add the above mentioned additional Mapping? Are the above String values of "script" and "IMAGE.SCRIPT" predefined in TopLink API? Can I accomplish the same thing just using the TopLink Workbench tool instead? If yes, please advise the detailed steps to do so.
    The tip also states to call the following code in case of using Clob:
    DatabaseLogin login = session.getLogin();
    login.useStringBinding();
    Should the above 2 lines of code be called after the following lines of code?
    SessionManager sessionManager = SessionManager.getManager();
    Server serverSession = (Server)sessionManager.getSession("MY_SESSION_NAME");
    Besides the above extra coding for the Session and Descriptor Mapping, is there any special handling in between Data model and DB table mapping? Can I map a Java String type to a DB Clob field using the Direct-to-field mapping?
    Appreciate any help.

    Never mind ....... I had already figured it out .....

  • Integration b/w uccx7.0 and oracle 10g

    hi,
    currently i am doing integration b/w uccx7.0 and oracle 10g. i have installed the oracle client 10g . and i added the DSN in ODBC and also the test connection is succesful.. but when i mention the DSN in app admin page (Subsytem> Database). it is showing me error that some of the information is incorrect for the connection. and is not allowing me to add DSN in appadmin page of uccx 7.0.. even though i am using the same information in sqlplus to query the database from ipccx. Do i need to mention sth to make it work.
    Regards
    Nareh

    Hi there
    A few things you have to watch out for.
    Firstly if you have create the DSN and able to connect to it via the ODBC its more likely that the driver was not loaded correctly.
    - Remove the Driver and DNS
    - Install the driver again and create the DSN and test if it works
    - Reload the whole windows <----- was working on a case for 3 hours UCCX just wasn't loading the new 10g drivers reload fixed this
    Now create the database connection and test.
    Should this not work you can try the following:
    CSCtb80893

  • Connecting to SQl server ( MS acess front end) and pull the data into BI

    Dear all,
    i need to extract the data from SQl server ( MS acess front end) and pull the data into BI .
    i need to know what are the steps need to follow on this..
    can any one help me on this...!
    Thanks,
    Siva

    Hi,
    1. login to sql server u2013 with ur server credentials  and connect.
    2. select ur sql for ex: sap bw
    3. Right click u2013 sapbw - task - export data  From sql to excel I m exporting So give sql details 
    4. Destination u2013 select excel.. and browse where u want to save the fileu2026
    5. give next
    6. select from which table u want to export
    7. click on  next
    8. click on finish
    9. close
    10. go to desktop and open the xyz.xls file
    11. not make it as csv file and load the data to BI as a flat file
    Hope it will help you.
    Regards,

Maybe you are looking for

  • Find Text and create link to other PDF

    Hi all, I need to know if the following is possible with either Javascript or VBA.. - Open a PDF - Find all text that starts by a specific set of character (let's say in this case '1M-') - For each text found, Select the entire word (not just 1M-) an

  • Is there a way to create a CSS image gallery with caption?

    Hi everyone, Ive been using the disjoint rollover, but I only have one thing that I want to add to it-a caption right underneath an image. Besides using that Project Seven plug-in, is there a way to create an image gallery without using layers? Or is

  • TV Says Channel Not Available

    So My TV says channel not available and I called Verzion and they are not able to help me.  I pay almost $200 dollars a month for service and I get the run around.  I am about to cancel my service if someone doesnt call me back or send a tech out to

  • Email button in forms

    I have created some forms using Adobe Acrobat 8 , I have added an email button, the problem I am having is that when I send the email is is sent as a xml and not as a PDF? I save the document as a s PDF but something happens when I send it Any help w

  • WebCenter/ADF Bounded Task Flow Permissions 11.1.1.4

    Hello All, I'm seeing some strange behavior related to permission on bounded task flows within a WebCenter Portal Application created with the 11.1.1.4 WC extensions. I created a bounded task flow and added a view activity and a return activity to it