SQL State S0001 error code 18456 for named sql server : jdbc errors

When I try to connect to named instance of SQL Server 2005,the error I get it
The database user has data reader and writer rights.
I have used sqljdbc4.jar
url is jdbc:sqlserver://SERVER_NAME:1433;databaseName=DATABSE_NAME;user=USERNAME;password=USER_PASSWORD
I also tried using the jtds driver and I get State 28000 error

You might want to make sure that the instance is specified.
For example, when connecting to SQL Server 2008 using DBVisualizer (free) with SingleSignOn authentication, you need to use the jTDS driver AND you have to specify the instance on the server in order to connect.
Instance-less connection requests are rejected with the same error message as wrong password:
java.sql.SQLException Error Code: 18456

Similar Messages

EVENT 36888, Schannel A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252.

I keep losing my network connection for a few seconds at a time. Not a big deal unless I just spent time filling in a form and have to redo it.
Getting:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8. I just installed the new ARRIS
TG862 provided by Comcast.
Any Ideas?
Also get the following errors in my events:
The name "WORKGROUP :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
Realtek PCIe GBE Family Controller is disconnected from network.
Any help is appreciated

Hi,
Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
How to use Skydrive
http://www.wikihow.com/Use-SkyDrive
Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
check device status in device manager, please also keep the all latest driver update of your PC.
And for error 36888, I found a similar thread, please refer to this link
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
Regards
Yolanda
TechNet Community Support

I have upgraded my iphone 4 (ios 4.3.5 to current release 5.0.1) yesterday and got an error code 1630 for carrier up-gradation failure. Now my device is not working for phoning purpose. It just stay muted at the time of call.

I have upgraded my iphone 4 by iTunes from ios version 4.3.5 to 5.0.1
and think it was the biggest mistake I have ever done.
Now my iphone basically not a celluler/mobile phone. I can't hear a single tone at the time of calling
and even the the receiver also can't here my voice. calling other and after receiving by them and to be
mute is the thing happned to me with that upgradation. before that it was working absolutely fine. I have
checked my microphone and headset by recording and it seems absolutely OK. I don't know what should
I do now?
Please help me.
I tried to downgrade my phone to 4.3.5 back but at don't accept downgradation and gives me an error code 3194

Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

Convert SQL statements to JAVA Code ?

Using SQL queries Can I convert SQL statements to JAVA Code ?
Edited by: user11238895 on Jun 7, 2009 10:54 PM
Edited by: user11238895 on Jun 7, 2009 11:12 PM

Me very new to Oracle.
can we convert SQL Queries to JAVA Code using simple built in SQL queries ?
Which SWISS SQL Tool does [Converting SQL Queries to JAVA Code]

How to isolate the Sql Statement from Java Code

Hi
I Need to know that can we segregate the Sql Statements and convert them to Stored Procedures so as to isolate the Sql statements from Java Code.
So i have one static web page which uses four select Statements so what i want is to create a stored procedure encapsulating these queries. So that the Java Web Developer will simply call the Stored Procedure instead of using four different SQL Statements.
Suppose the developer has these four Statements
Select ename,empno,sal,job from emp;
select empno,ename,mgr from emp;
select deptno,dname from dept;
select emp.ename,emp.empno,emp.deptno,dept,dname fromemp,dept;
So can i encapsulate these four Sql Statements in one Procedure and the Web developer can call the Store procedure and dont need to write the Sql Statements in his code.
Can Anybody guide me how to write this Stored type of Store procedure.
Thanks

http://www.google.com/search?q=java+windows+registry
Next time, search yourself. It might be beyond your belief, but you're really, really not the first person to wonder about this.

Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update

Adobe CSXS InfrastructureCS6 Installation failed. Error Code: U44M1P7 for CS6 during exchange update on Windows 7.
Please advise... It appears that some programs available in CS6 did update, just not PS, AI or some of the other programs needed for my current classes.
Thank you,
tjr

Try following the steps outlined in this blog post:
http://acrobatninja.com/2013/07/fixing-csxs-infrastructure-update.html

Error code 499 for download music

error code 499 for itune music download all other music is ok.thanks

Hello, holebung.
Thank you for visiting Apple Support Communities.
Here are the troubleshooting steps that I would recommend going through when receiving error 499.
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
iTunes: Advanced iTunes Store troubleshooting
https://support.apple.com/kb/TS3297
Cheers,
Jason H.

Is there a range of error codes reserved for user defined error codes?

I would like to create my own error codes for a CVI dll but I want to make sure I don't use error codes already defined for something else. Is there a range reserved for such use?
Samee thing for warnings (errorcode > 0)
Thanks

I have never found a positive mention of a "safe" range of error codes available for user-defined error conditions, but I can suggest you some source of informations.
First of all, every library has its specific list of error codes, usually listed in the relative include file. All these error codes are listed in the online help too (search for "error codes" in the index tab of the help).
Second, GetGeneralErrorString () is a function that can be used to trap errors of the following libraries with a unique error function:
User Interface Library
Easy I/O instrument driver
Toolbox instrument driver
ActiveX Library
DIAdem Connectivity Library
.NET Library
DataSocket instrument driver
Network Variable Library
Real-Time Utility Library
TDM Streaming Library
UDP Support Library
This means that the error codes from this libraries do not overlap, so you could derive from its code some ranges not used by these libraries.
Nevertheless, there is not a single function for error trapping: every library has its proper list of error codes and a function to decode them in human readable form, andthere is no guarantee that these ranges does not overlap. It's up to you to trap errors from every function in the proper way.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Code beautifier for PL/SQL

Does anyone know of a good code beautifier for PL/SQL?

A tool called "Formatter Plus" is available to do this job. You can download the tool from the Revealnet (recently acquired by Quest software) web site.
The URL is http://www.quest-pipelines.com/
I downloaded the 'free trail' version and it asked my
to enter the license key, which they don't supply!
WHAT A PIECE OF JUNK!

Import Error (Partial Set failure with RC error code = 0x84020020 for rec

Hi,
While importing the data through xls file , i am getting the error message "Partial Set failure with RC error code = <0x84020020> for record number
0 through 212" and no record get created in Data manager.
Although i mapped all values , still it giving me an error message.
I tried to Import other data and it was all working fine.
Please guide
Regards
Sandeep Kumar

HI,
I checked the exl file and found that in the first column and first data was in text format ('0001)but later on when i change the record and moved it to the last record , it worked fine. I was able to load all records including ('0001)
I don't know wht the logic behind this:
if my first record was ('0001), system was giving me the error and not allowing me to load the data. But when i moved the record as the last record it not only allow me to load the records but allow ('0001) also.
If anyone have any clue , plz let me know.
Regards
Sandeep

Can the format of a SQL Statement modify the execution time of an SQL ....

Can the format of a SQL Statement modify the execution time of an SQL statement?
Thanks in advance

It depends on:
1) What oracle version are you using
2) What do you mean for "format"
For example: if you're on Oracle9i and changing format means changing the order of the tables in the FROM clause and you're using Rule Based Optimizer then the execution plan and the execution time can be very different...
Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2009/12/29/estrarre-i-dati-in-formato-xml-da-sql/]

Error code 0X8007007B when activating windows server 2012

error code 0X8007007B when activating windows server 2012

If your key is for KMS activation it will never activate without the KMS server, make it sure that you have KMS server and your server is reachable to the KMS server. Please see this Kb ARTICLE
http://support.microsoft.com/kb/929826/en-us
http://www.arabitpro.com

C# Code Example for Configuring SQL 2005 Reporting Services?

I have found the MSDN articles describing the classes, public methods, etc. for configuring SQL Server 2005 Reporting Services via WMI. I need to initially configure them and just do this:
- Report Server Virtual Directory
- Windows Service Identity
- Web Service Identity
- Database Setup
- Email Settings
- Execution Account
Is there a C# code example that already exists putting together all of this? I didn't want to reinvent the wheel if I didn't need to.
-Ed

Jin,
Thanks so much! This is great! Your work is awesome!
I have a couple of issues that came up...
1) CreateVirtualDirectory.vbs creates the virtual directory for the Report Server just fine. Now how do I distinguish a script to create the virtual directory for the Report Manager?
2) I decided to go ahead and use what you did for scripting CreateApplicationPool (using http://msdn.microsoft.com/en-us/library/ms155349(SQL.90).aspx). I found the syntax is wrong here when I kept getting an error, so I put PowerShell on the server and pulled the following info:
Name : CreateApplicationPool
MemberType : Method
Definition : System.Management.ManagementBaseObject CreateApplicationPool(System.String Name, System.Boolean UseBuiltIn
Account, System.String Account, System.String Password)
However, I'd like to use "NT Authority\NetworkService" or "Network Service" as the account (which is an option for the Builtin accounts when I us RSConfigTool.exe). This is the syntax I used:
objInParam.Properties_.Item(
"Name") = "ReportServer"
objInParam.Properties_.Item("UseBuiltInAccount") = true
objInParam.Properties_.Item("Account") = "NT Authority\NetworkService"
objInParam.Properties_.Item("Password") = ""
But I always get an error with a negative number for the HRESULT.
Any ideas?-Ed

Using a Table Trigger to Trap Error Codes Returned to a SQL Loader seeion

I would be grateful if anyone knows how to go about this.
I am trying to insert into a table, details of SQL Loader's rejected records by possibly using a trigger on the loading table to try and trap the error code returned to SQL Loader.
What I am trying to achieve is to insert in to a table the load or rejected record details that are in SQL Loaders log file after a load session. For example: records read:, records inserted:, records rejected:...etc..
My main concern is that the loading table is regularly loaded, with 3m records, has 90 columns, and to check by referencing each column's new value, in the table trigger, may mean very long load times.
Anyone got any how to ideas?
Many thanks
Regards
Carlos

Folks, thanks for your help.
Previously, I had briefly considered both ideas and they would work.
I dismissed the utl_file package solution because I believed that it would take too long to read in each log file line, search for the text and then inserts it into a table.
I overlooked testing this and when I did (1mb file) it actually was pretty fast. I will go that route.
Thanks for everyones help
regards
Carlos

Error Code Definition for JDBC Thin driver

Would like to know where I can find the definition of error codes
for JDBC thin driver to Oracle 7 database. Right now, when I have
database errors, I get SQL execption with CODE=XXXXXX. Need to
know the definition of the error codes in order to decide whether
the application shall retry or quit or do something else. Thank
you in advance.
null

Hi,
thin client session Language is controlled by java Locale.
Based on testing code, ORA- messages are localized after the connection is successfully established. ORA- messages returned in the middle of connecting are in instance language.
So, as far as I can say, you need to catch exceptions from DriverManager.getConnection(url, info); and translate them on your own.
Once the connection is successfully returned, ORA- message language is defined by java Locale.
Tests were performed on Oracle 10gR2 (both thin driver and DB).

SQL State S0001 error code 18456 for named sql server : jdbc errors

Similar Messages

Maybe you are looking for