Work-Centre Capacity

Hi Experts,
We want to maintain the capacity of work centre can you please answer the following :
1.We have created workcenter such as AUTO at second level & AUTO-WELD,AUTO-FITT on third level in Hierarchy.
Could you tell me how I have to maintain the capacity, should i maintain on third level or second level basically what is the process of maintaining capacity to work centre.
2.If i maintain capacity only on third level could i see the total capacity on second level of hierarchy summation of welder & fitter workcentre .
3.IF I Have one engineer common for 4 welder & 4 fitter under the AUTO-WELD & AUTO-FITT workcenter, what could be the indual capacity 5 or 4 for one workcentre.Here ,should i consider engineer also for both the workcenter or should i skip this engineer for both workcentre.
AR
Edited by: Amit Rana on Feb 8, 2010 7:22 PM

Hi experts,
I have modified the question, & expecting your valuable input.
AR

Similar Messages

Work centre capacity utilization

Dear guru ,
i have a work centre that always work in the same moment for 3 different production order.
If my total daily available capacity is 11 hours for my 1 individual capacity is right that I assign to the work centre a capacity utilization of 300 percent in order to have a daily available capacity of 33 hours and I can use capacity levelling in the best way ?
Or there is other better solution for solving this problem ?
Thanks for your help.

you can also put no. of individual capacity as 3.

Work centre capacity tables

Hi gurus,
I need to extract data from CM50 report output. I need to extract the values from following fields.
Pegged requirements
Activity/operation
Pegged rqmts type
Pegged reqmt qty
Total capacity reqmts
Material
Work Center
Plant
Available Capacity
Can you please tell me the list of corresponding tables to do this.
Regards
Rajib Pathak

Hi
KAKO - Capacity Header Segment
KAKT - Capacity Description
KAZY - Intervals of Capacity
KBKO - Header record for capacity requirements
KBED - Capacity requirements records
KBEZ - Add. data for table KBED (for indiv. capacities/splits
TC26 Capacity category
TC26D Default values for capacity
TC26T Description of the capacity category
TC27 Capacity planner groups
TC27T Text for the capacity planner group
CYAFVG - View for Capacity Planning: "Order Operatns/netw.activities"
CYOPR_MOVE - Order-/operation data

Inconsistent - Work Centre's Long-term Planning (KAKO-KAPLPL)

Hi Experts,
we're upgarding from SAP4.5 to ERP6.
I reviewed OSS note 950834, but it's not related.
We extracted from SAP4.5 Work Centre - Capacity Header - Long-term
Planning.
It's ticked (X) in CR03, but blank () in table KAKO-KAPLPL.
We loaded into ERP6 Work Centre - Capacity Header - Long-term Planning.
It's blank () in CR03, but ticked (X) in table KAKO-KAPLPL.
Please advise the fix for this issue.
Thanks,
Thomas

Dear Thomas,
I suggest you to check relevant OSS notes. Also creaete a OSS message for this issue.
thanks and regards
muru

Capacity category in work centre

Hi, we maintained the two different capacity categories (001 and 002) in work centre. Please advise in which table these 2 capacity categories will be saved in sap? Thank you.

Dear Raju,
Please refer the table KAKO to view the capacity categories.
Refer the table CRHd and enter the work center to get the object ID.
Enter the Object id while using KAKO and get the capacity category.
regards,
Joseph charles Vaikathussery
Edited by: Joseph Charles on Feb 10, 2011 12:54 PM

PP Work centres actual capacity Utilization

Dear All,
I want to have some information about the cube from which i can extract the data of PP work centre's capacity utilization. thanks

Hi Amir,
Did you try 0PP_C13?
Hope this helps,
Rgds,
Guru

WORK CENTRE IN EQUIPMENT MASTER DATA

Hello All,
In IE01 tcode > creation of equipment , pls tell me what is the relevance of work centre in location tab ??
Thanks,
Sunny

Hi
Work Center
Definition:Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
Machines, machine groups
Production lines
Assembly work centers
Employees, groups of employees
Use
Together with bills of material and routings, work centers belong to the most important master data in the R/3 production planning and control system. Work centers are used in task list operations and work orders. Task lists are for example routings, maintenance task lists, inspection plans and standard networks. Work orders are created for production, quality assurance, plant maintenance and for the Project System as networks.
Data in work centers is used for
Scheduling
Operating times and formulas are entered in the work center, so that the duration of an operation can be calculated.
Costing
Formulas are entered in the work center, so that the costs of an operation can be calculated. A work center is also assigned to a cost center.
Capacity planning
The available capacity and formulas for calculating capacity requirements are entered in the work center.
Simplifying operation maintenance
Various default values for operations can be entered in the work center.
Look at CR01 ,CR02,CR03 Transaction
table : CRHD Table
<b>Reward points for useful Answers</b>
Regards
Anji

Work centres for employee of more than one plant

Hello experts
I have a question regarding work centres. Our department is managing a pool of workers which consist of employee from more than one plant. Somebody had made experience concerning this issue?
Furthermore we have to manage external workers as capacity. How can I build up this in SAP?
Best regards

>
> I confused plants with company code.
>
This bit difficult for me to decide and say something.
Depends on the business requirement and business process and legal statuses it will be decided.
some time plans can also be company 'codes'.
if the management wants to differentiate plants in financial terms plants may become company codes.
>
So we have employees of different company codes which get managed by one department manager. Is that possible to make one work center so that we are able to manage them together. Seems infeasible. So we have to create for every company code one work center, but we never have an overview of our total workers...
>
One thing you need to get clarified here. Company is a separate legal entity.
if you want one employee to work in different companies on different assignments you support use (MGE and CE concept)
>
> If he/she working in two different site we can manage the situation with dual reporting concept.
> and with:
> For cost center you can always use cost center split. while posting to FI/CO.
>
Dual reporting is to manage the people.
Cost is for final analysis ( where employee work how much incured, how much profit/loss earned)

Difference between PP work Centre and Main work centre in a floc ?

Hi,
Can someone tell me the difference between the PP work centre in the location tab of a functional location compared to the Main Work Centre listed in the Organizational tab ?
Thanks

Kent,
The way I understand it, is that the main work centre (Field name: GEWRK) in the organizational tab refers to the actual group who are reponsible for carrying out the maintenance of the object. Costing and capacity planning is carried out through this Work Centre. However the PP Work Centre (Field name: ARBPL) in the location tab is a different work centre. And I'm not sure what it controls (if anything). I think it refers to the location of the unit, but other than that I don't know what it controls.

2 machines in 1 work centre

Hi Experts,
In my scenario there are 2 machines in 1 work centre. So when I go to capacity tab then where can I maintain that I have 2 machine capacity? Please answer me ASAP....

Hi,
You can maintain two machine as one work center in the Capacities tab enter 001 (Machine capactiy) and enter the system will take to another screen, where you can enter the time ofthe workcenter and capacity utilization and number of individual capacity, there you can enter 2. So the the capacity available will be multiplied by the number of capacity.
for Ex: you have enter time 08:00:00 to 17:00:00 then for one machine the available capacity is 9 hrs for 2 machines, it will be 18 hrs, the system will calcutate andit will show the capacity as 18 hrs.
Thanks,
JK

How to measure work centre performance in the pp point and pm pinot of view

Dear Guru`s,
how to evaluate the work centre performance in the pp,pm point?
how to evaluate the OEE (overall equipment efficieny)?
can anybody suggest that, if there is any transactions are avialable to get the reports or any process is to be followed to evaluate these?.
regards,

hi
you can evaluate the PM work center using t-codes
CR05 - Work Center List
CR06 - Cost Center Assignment
CR07 - Work Center Capacity
CR08 - Work Center Hierarchy
with this you can get the requirment,available and overlaod of the capacity
OEE cannot be directly calculated you can develop the custom based program to calulate the one with available input,( available hrs,down time hrs)
regards
thyagarajan

Assignment of single capacities to a work centre

Dear experts,
I have following problem:
We created capacities which we want to use for capacity planning using CR11.
In the work centre maintenance I want to assign these capacities using CR02. - Capacity header view --> ' go to individual capacities' . Here I want to fill the table 'capacity assignments - individual capacities' . When I put in the capacity code I get the error message CR100 'the capacity exists already'.
I can only create new capacities (using new capacity codes). that doesn't help since we need to assign pool capacities which means these new capacites can not be assigned to the other work centres later on. For my problem it does not matter whether the capacity to be assigned is a pool capacity or not.
What I want to do is exaclty what I found described in SAP documentations, unfortunately without detailed instruktions .
What do I need to do to be able to assign these individual capacities?
thanks in advance
Kurt

Dear,
In Work center i.e CR02 capacity header, click Goto -> Individual Capacites . This will take you to the "Assignment tot the Individual Capacity" screen. Here you give names of the individual capacities and Click "Choose (F2)" , where you can maintain the header details for this individual capacity.
For example:
when You give individual capacites as '2' ,youI have to go to GOTO field and select there Individual capacities. It asks for capacity and its short text.In capacity field you can give person1, person 2 etc and its short text as Ramesh, Kishan (name of operators).
Regards,
Ram,

HOW TO DISPLAY ITEMS OF FIELD 'ARBPL'(WORK CENTRE)IN HORIZONTAL IN ALV..

HI FRIENDS .
PLEASE GIVE THE SOLUTION OF THIS PROBLEM.
I AM DOING THE REPORT OF CAPACITY PLANNING USING ALV LIST.IN THIS REPORT FC REQUIRES THAT ITEMS(SUCH AS 1050T,300T) OF FIELD 'ARBPL'IN HORIZONTAL MANNER.
BUT THIER THE PROBLEM IS THESE ITEMS ARE VARIABLE FOR DIFFERENT PLANT FIELD IN REPORT.
SUPPOSE PLANT = F-II
WORK CENTRE = 1050T,300T.
        PLANT = G228
WORK CENTRE = PRESS 250T,PRESS 300T.
PLEASE GIVE THE SOLUTION IMEDIATE I HAVE WASTED SO MUCH TIME ON THAT PROBLEM.
THANKS IN ADVANCE.
VIKRAM

Hi,
Please Use field symbols and this method
Declaration:
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
                 <dyn_wa> TYPE ANY ,
                 <dyn_field>,
                 <fs> TYPE ANY.
DATA: dy_table TYPE REF TO data,
        dy_line TYPE REF TO data,
        xfc TYPE lvc_s_fcat,
        ifc TYPE lvc_t_fcat.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = ifc
    IMPORTING
      ep_table        = dy_table.
    ASSIGN dy_table->* TO <dyn_table>.
    CREATE DATA dy_line LIKE LINE OF <dyn_table>.
    ASSIGN dy_line->* TO <dyn_wa>.
    Note:Pls Reward this answer if USEFUL.
Regards,
Kumaresh

Work centre hierarchy

HI to all,
I have created work centre hierarchy with three work centre having 24 hrs capacity each. from this hrchy i have used the superior work centre in the routing.so when i create the production order how i can use the cumulative capacity (72 hrs) of subordinate work centres to reduce the scheduling time.
u r answers will be rewarded,
Regards ,
Daniel.

Hi,
Extract from help.sap.com
===========================================================================
Use of Work Center Hierarchies
Work center hierarchies are used in capacity planning to cumulate available capacity and capacity requirements.
You can cumulate available capacities from subordinate work centers to a superior work center level in order to determine the total available capacity for the superior work center.
In your factory you have several lathes. You create a higher-level work center, called "Machine center 3", which you use to cumulate the available capacity of several lathes.
===========================================================================
The below may be useful..
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b1/c037a1439a11d189410000e829fbbd/content.htm
Regards,
Siva

Work centre

hi all,
pls help me with,
WHAT ALL IS TO BE INTEGRATED WITH WORK CENTRE IN HR..I MEAN IS IT ORGANIZATIONAL UNIT..I MEAN WHAT?n hw to integrate it.
thanx n regards

Hi,
Work Center (CR01 - Create, CR02 - Change, CR03 - Display)
Using the data maintained for a work center, you can
determine which machines or people are to be used in the operations
calculate costs, capacities and dates for the operations
OP42 - Configure the default value for Work Center during the initial creation.
After creating many work center in the Routing, the users might want to check what materials and components allocation have been updated with this work center. You can used this program Work Center in Routing - Search through all the routing for the material and component allocation used.
The standard program transaction CA80, checks where the work center was used in the routing. However, it did not list the components allocation for the work center.
Pooled Capacity field - When a production order 1234567 has the capacity requirement on its work center Wxxxxx. It means it has the requirement on pooled capacity Pxxxxx. If more than one work center shared this pooled capacity, the requirement (transaction CM01) will be shown on all the work center with the SAME shared pooled capacity.
In HR system we will the cost per each Work Center level. This work center we can assing org unit leave or postion level also.
Please revet back further clarifications.
WarmRegards,
Devi.,

Work-Centre Capacity

Similar Messages

Maybe you are looking for