SQL task on SSIS, send execution process to email

Hello,
I have a package that run an SQL taks. This task takes some time, more than 24 hours.
I can see on the SSIS Progress Tab, that it add a row with information about the % of the SQL task running (% of instruccions).
I would like to be able to send an email with this % everytime it change. If not available, from time to time, Eg. Every hour.
How can this be acomplish ?
Gilberto H.

Hi Gilbert,
The percentage information which you see in execution results is not about the % completion of the task/package. When a task executes there are lot of SSIS pipeline events and some other events occurring for each task and are displayed in execution results
tab. If somehow you can capture these % messages it will not make much sense to send mails on each change in % message as these messages are too frequent and quite a lot in number (depending on number of tasks in your package).
The nearest I have logged is when these events started and finished by implementing SSIS Logging.
Nitesh Rai- Please mark the post as answered if it answers your question

Similar Messages

Customized Execute SQL Task in SSIS

Hi,
I,m using Execute SQL Task in SSIS Package with these configuration ..
But, If SQL Statement doesn't report any record mean Query is not returning any data then this Task will be failed.
How can I assure that If there is no record is returning in query that " Execute SQL Task " should bot be executed .
Also I If I can do the same thing through other methods in SSIS, Pls response .
-Ashish

Hi Ashish,
The Execute SQL Task failed because you had set the ResultSet to “Single row”, however, the SQLStatement didn’t return any records. If you don’t want to execute this task when the query doesn’t return any records, you can use the following method:
Create a String type variable RowCnt, add another Execute SQL Task prior to this task.
In the new Execute SQL Task, input the SQLStatement as “Select Count(*) From Table”, set the ResultSet to “Single row”, and map the result set 0 to the variable RowCnt.
Join the two tasks (green line), and edit the Precedence Constraint (Green line), and set the expression to “(DT_I4)@[User::RowCnt]>0”.
Regards,
Mike Yin
TechNet Community Support

Execute SQl Task Error SSIS Package

Hi all,
I`m using for each loop container in my package to grab the file name from the source path. I have created 2 vairables
FilePath and SourceFolder
I`m using execute sql task inside the container and this is my query
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) SELECT File_name = ?,
File_Date = GetDate()
Please not the Table I am trying to insert has more columns but at this stage I dont need them.
When i execute the task I get an error
[Execute SQL Task] Error: Executing the query "
INSERT INTO [dbo].[DCA_FF_TEST] ([File_Name],[F..." failed with the following error: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters
not set correctly, or connection not established correctly.
Can someone point me in the right direction? Am I missing anything?
Resultset property Set to None
Parameter Mapping: Variablename: FilePath , Direction: Input, datatype : Varchar, Parametername: 0, ParameterSize: 100.
I`ve checked the connection as well it works.
FM

Did you try
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date)
SELECT ?, GetDate()
Or
Insert into [dbo].[DCA_FF_TEST] (File_Name,File_Date) VALUES (?, GetDate())
A Fan of SSIS, SSRS and SSAS

Multiple Select statements in EXECUTE SQL TASK in SSIS

Can we write multiple select statements in execute sql task(SSIS).
If possible how to assign them to variables in result statement

Hi ,
You can use below steps to set result set to variable.
1.In the Execute SQL Task Editor dialog box, on the General page, select the Single row, Full result set, or XML result set type(According to your result set).
2.Click Result Set.
3.To add a result set mapping, click Add.
4.From the Variables Name list, select a variable or create a new variable.
What is multiple selection ? May be below can be used in your scenario !
http://stackoverflow.com/questions/17698908/how-to-set-multiple-ssis-variables-in-sql-task
What you want to achieve ?
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

How do I create an Event Handler for an Execute SQL Task in SSIS if its result set is empty

So the precedence on my entire package executing is based on my first SELECT of my Table and an updatable column. If that SELECT results in an empty result set, how do I create an Event Handler to handle an empty result set?
A Newbie to SSIS.
I appreciate your review and am hopeful for a reply.
PSULionRP

Depends upon what you want to do in the eventhandler. this is what you can do
Store the result set from the Select to a user variable.
Pass this user variable to a Script task.
In the Script task do whatever you want to do including failing the package this can be done by failing the script task, which in turns fails the package. something like
Dts.TaskResult = Dts.Results.Failure
Abhinav http://bishtabhinav.wordpress.com/

I created an Execute SQL Task in ssis package to get the counts and store it in the variable and I use the variable in the control flow

I always get the count as 0 for the variable. I am not sure what I am doing wrong. Please let me know if any of you know the fix.
Thanks

Here is the query I used now. Still same result
SELECT (select count(*) from usr_all_mbrs where PREMIER_YN = 'Y') AS count1
SELECT
(select
count(*)
from usr_all_mbrs
where PREMIER_YN
=
'Y')
AS count1

DWLoader works in SSIS Execution Process Task?

Does anyone knows if PDW's DWLoader works in SSIS Execution Process Task? Is there a sample?
I struggle to find documentation on using DWLoader.exe in Execution Process Task (EPT) of SSIS. There are articles in PDW BOL about DWLoader.exe or SSIS to load data, however, there is no article I
can find about using DWLoader.exe in Execution Process Task SSIS. I'd expect SSIS to behave the same way as we execute it in Command Prompt.
A working (dwloader.exe) command string when putting to run in [Execution Process Task] in SSIS failed and it is hard to trap the errors. Tried writing the error out in my command string, as well as setting the StandardErrorVariable of the task, neither
one caught the details about the error. I also put the same command string in a bat file and then ran it, it worked. I then used EPT to run my bat, that actually succeeded. (That indicated to me Execution Process Task might have interpreted my string differently).

Hi there,
I am trying to use the dwloader utility to load data into a PDW database. I have created a batch file with the following syntax:
dwloader.exe -M fastappend -m -i "D:\SS\DATA_LOAD.txt" -T BATCH_V0.dbo.ATC_LOAD_TBL -R "D:\SS\LoadErrors_ATC.bad" -t "|" -r "\r\n" "yyyy-MM-dd HH:mm:ss.fff" -E -S 10.11.12.13 -U ATC_Login -P Password > "D:\SS\Error.log"
But the execution fails everytime. The error log gets generated but its empty. Can someone help me with the syntax? Am I missing something here?
Thanks in advance,

[Forum FAQ] How do I send multiple rows returned by Execute SQL Task as Email content in SQL Server Integration Services?

Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT   Category, CntRecords
FROM         [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
   // TODO: Add your code here
            Variables varCollection = null;
            string message = string.Empty;
            Dts.VariableDispenser.LockForWrite("User::Message");
            Dts.VariableDispenser.LockForWrite("User::Category");
            Dts.VariableDispenser.LockForWrite("User::CntRecords");
            Dts.VariableDispenser.GetVariables(ref varCollection);
            //Format the query result with tab delimiters
            message = string.Format("{0}\t{1}\n",
                                        varCollection["User::Category"].Value,
                                        varCollection["User::CntRecords"].Value
           varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
           Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
        ' Add your code here
        Dim varCollection As Variables = Nothing
        Dim message As String = String.Empty
        Dts.VariableDispenser.LockForWrite("User::Message")
        Dts.VariableDispenser.LockForWrite("User::Category")
        Dts.VariableDispenser.LockForWrite("User::CntRecords")
        Dts.VariableDispenser.GetVariables(varCollection)
        'Format the query result with tab delimiters
        message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
        varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
        Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

SSIS custom execute sql task : Failed with error

I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
"The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
not being created.".
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CustomSSISTask
Here is the code sample I'm trying ,
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
MessageBox.Show("testing:");
try
// Add the SQL Task
Package package = new Package();
package.Executables.Add("STOCK:SQLTask");
Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
// Get the task host wrapper
TaskHost taskHost = package.Executables[0] as TaskHost;
// Get the task object
ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
// Set core properties
task.Connection = connections[0].Name;
task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
//task.SqlStatementSource =
// "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID = '1'";
task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
// Add result set binding, map the id column to variable
IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
//IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
resultBinding.ResultName = "variable";
resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
task.Execute(connections, variableDispenser, componentEvents, log, transaction);
catch (Exception ex)
throw new ArgumentException(ex.Message);
return DTSExecResult.Success;
It doesnt throw any exception but custom task fails.
Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
Any help would be greatly appreciated.
Thanks
Sang

Hi, could you check whether the following threads help:
http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
Regards, Leo

SSIS Execute SQL Task using sp_rename giving deadlock issues

All,
We have a job that has 2 steps and both of those steps call an SSIS package
1st package - Loads the data from a SQL server source, to a SQL Server destination tables, say, "TblHistory" is one of them
2nd package - It does a re-name from the History table to the Main table, so below, is how the code looks like in the execute SQL Task:
BEGIN TRANSACTION
EXECUTE sp_rename 'dbo.Tbl', 'TblOld'
EXECUTE sp_rename N'dbo.TblOld.PK_TblId', N'PK_TblIdOld', N'INDEX'
EXECUTE sp_rename 'dbo.TblHistory', 'Tbl'
EXECUTE sp_rename N'dbo.Tbl.PK_TblHistoryId', N'PK_TblId', N'INDEX'
EXECUTE sp_rename 'dbo.TblOld', 'TblHistory'
EXECUTE sp_rename N'dbo.TblHistory.PK_TblIdOld', N'PK_TblHistoryId', N'INDEX'
COMMIT TRANSACTION
In package 1 there are multiple history tables that are being loaded and most of them get renamed in the 2nd package. There is a separate SQL task for each of the history tables. The problem that I am running in to are the deadlock issues. When the 2nd package
runs, it throws this error:
"SQL - Table Rename & Swap for "Tbl" Execute SQL Task Description: Executing the query "BEGIN TRANSACTION EXECUTE sp_rename Tbl..." failed with the following error: "Transaction
(Process ID 60) was deadlocked on lock resources with another process and has been chosen as the deadlock victim."
It's giving me a deadlock issue on the other tasks as well. So, when the job ran today, I am noticing 4 deadlock errors on the 4 different execute SQL tasks in the 2nd package (i.e. the job fails at 2nd step)
Has anyone faced this scenario before?

Why renaming tables? The data do not change. So just load the data to an interim table and push it to the target or may be you do not need it at all - just load the right table.
I admit I fail to capture the overall picture of what you are trying to solve or deliver. But renaming tables is something not usual.
Arthur My Blog

HELP: SSIS 2012 - Execute SQL Task with resultset to populate user variables produces DBNull error

I am experiencing an unexplainable behavior with the Execute SQL Task control in SSIS 2012. The following is a description of how to simulate
the issue I will attempt to describe:
1. Create a package and add two variables User::varTest1 and User::varTest2 both of String type with default value of "Select GetDate()"
for each, have shown this to not matter as the same behavior occurs when using a fixed string value or empty string value.
2. Add a new Execute SQL Task to the control flow.
3. Configure an OLE DB connection.
4. Set SQLSourceType = "Direct Input"
5. Set the ResultSet property of the task to "Single Row"
6. In the ResultSet tab add two results as follows:
Result Name: returnvalue1, Variable Name: User::varTest1
Result Name: returnvalue2, Variable Name: User::varTest2
7. Set an expression for the SqlStatementSource property with a string value of "Select 'Test' returnvalue1, 'Testing' returnvalue2'"
The idea is that the source would be dynamically set in order to run a t-sql statement which would have dynamic values for database name
or object that would be created at runtime and then executed to set the user variable values from its resultset. Instead what occurs is that a DBNull error occurs.
I am not sure if anyone else has experienced this behavior performing similiar actions with the Execute SQL Task or not. Any help would be
appreciated. The exact message is as follows:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "varRestoreScript": "The type of the value
(DBNull) being assigned to variable "User::varRestoreScript" differs from the current variable type (String). Variables may not change type during execution. Variable types are strict, except for variables of type Object.
User::varRestoreScript is the first return value. And even with the a dummy select the same result occurs. I have narrowed the issue down
to the T-SQL Statement structure itself.
The following works just fine within the execute sql task control as long as no resultset is configured for return:
"Declare @dynamicSQL nvarchar(max)
Select @dynamicSQL = name
From sys.databases
Where name = 'master'
Select atest_var1=@dynamicSQL, atest_var2='static'"
I have tried various iterations of the script above with no success. However, if I use the following derivative of it the task completes
successfully and variables are set as expected. This will not work for my scenario however as I need to dynamically build a string spanning multiple resultsets to build one of the variable values.
"Select atest_var1=name, atest_var2='static'
From sys.databases
Where name = 'master'
I have a sample package which can reproduce this issue using the above code. You can get to that through the post on www.sqlservercentral.com/Forums/Topic1582670-364-1.aspx
Scott

Arthur, the query when executed doesn't return a null value for the @dynamicSQL variable. It returns "master" as a string value. Even the following fails which implements that suggestion:
Declare @dynamicSQL as nvarchar(max)
Select @dynamicSQL = name
From master.sys.databases
Where name = 'master' -- (or any other DB name)
I believe I have found the cause of the issue. It is datatype and size related. The above script will properly set the variables in the resultset as long as you don't use nvarchar(max) or varchar(max). This makes the maximum data size for
a String variable 4000 characters whether unicode or non-unicode typed.

Calling Winrar.exe from Execution Process Task by Passing Arguments

Is any body having knowledge please let me know how to pass the arguments to winrar .exe to create a zip file from the Execution Process Task in SSIS

Should be something like:
unrar x c:\yourfile.rar *.gif c:\extractfolder\
Executable: C:\Program Files\WinRAR\unrar.exe
Arguments: x c:\yourfile.rar *.gif c:\extractfolder\
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Send Email using Execute SQL Task??????

I need to send the bad records in the data flow. I am attempting to do this using Execute SQL Tasks. Please give me steps I need to accomplish this. I have not set any variables up yet, assuming I need too.

Just add a Send mail Task (or Script Task if using gmail etc which requires authentication) and pass the file as an attachment. Make sure you've a step (Script Task) to check if file length > 0 (ie file has records) before you link it to Send mail Task
ie use a conditional precedence constraint (Expression And Constraint option)
See these links for more details
http://dwteam.in/send-mail-in-ssis-using-gmail/
http://www.mssqltips.com/sqlservertip/1753/sending-html-formatted-email-in-sql-server-using-the-ssis-script-task/
https://www.simple-talk.com/sql/ssis/working-with-precedence-constraints-in-sql-server-integration-services/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

SSIS Analysis Services Processing Task - which object is being processed?

Hi
I've just fallen down the hole dug by a gotcha in the SSIS Analysis Services Processing task (let's call it the ASPT as it's too long to type).
I was doing testing yesterday, targeting a test database. The way things are set up here is that we have two structurally-identical databases (let's call them SSASLive and SSASTest) on the same SSAS server.
The SSIS package includes an Analysis Services Processing task that processes a partition of a measure group in a cube.
So I changed the properties of the AS Connection Manager in the package to point to database SSASTest. Then, because I'm paranoid, and don't trust the Editor for the ASPT, I edited the object to be processed, by deleting the existing object from the
list and re-adding it (going down the tree: database SSASTest, cube TheCube, measure group TheMassiveMeasureGroup, partition CurrentMonth).
This is an annoying necessity, because: the ASPT editor doesn't allow you to see exactly what the object(s) in the list to be processed are, by e.g. double-clicking on them. All you can see is the lowest-level object name, which could be just
"Current Month". Current Month what? There's no way of telling.
Test worked fine. I made sure the AS Connection manager was reset to point to SSASLive, and deployed the package.
This morning, the package ran, and processed the partition in database
SSASTest. What happened? Looking in the Code view of the package, I found the XMLA behind the Processing task: the database name is literally specified in the XMLA, and completely ignores the Catalog of the AS connection. This information
is not exposed anywhere in the UI view of the package.
It's a bit like the dangerous annoyance when testing SSIS package Exec SQL tasks, where a previous developer has insisted on fully-qualifying object names: SELECT * FROM LiveDatabase.dbo.ATable. You're working with a connection to a test database,
but it makes not difference...
But at least that problem is clearly visible. I know that specifying the database name is normal in XMLA tasks: but at least the SSIS editor should allow you to see what the setting is.

No, the point is that the Connection Manager's Initial Catalog setting (whether hard-coded or set by any of the configuration methods) has no effect on the database addressed by the Analysis Services Processing task.
Steps to reproduce:
1. Create an Analysis Services database containing a cube (or select an existing one): let's call it ASDB1.
2. Make a copy of it on the same server, e.g. by backing up and restoring: let's call it ASDB_Copy
2. Set up an SSIS package with a Connection Manager pointing to ASDB1
3. Create an Analysis Services Processing task, using the Connection Manager, processing any particular SSAS object.
4. Run the package. The SSAS object in ASDB1 is processed (not the object in ASDB_Copy). (Confirm by checking the Last Processed date in SSMS, Properties).
5. Change the Connection Manager's Initial Catalog setting to point to ASDB_Copy.
6. Run the package. The SSAS object in ASDB1 is processed, not the object in ASDB_Copy. The Connection Manager's Initial Catalog setting has no effect on the AS Processing Task. Examining the Code view of the package confirms that the XMLA
behind the task specifies the database as well as the AS object. (and this database setting is still ASDB1).
The fix would be for SSIS to perform validation of AS objects referenced by the AS Processing Task whenever its Connection manager is pointed to a different database, and to update the XMLA accordingly.
Also, it would be useful to be able to see exactly what the objects listed in the Processing Task are. The information shown is just not sufficient to identify the object to the developer. I may have dozens of measure groups with a partition
called Current Month - but "Current Month" is all I can see in the editor, and there's no way to e.g. double-click on an item in the list and get the full object identification (Cube X, measure group Y, partition Current Month). Sure,
I can go and look at the XMLA, but that's fiddly: if there's going to be a wrapper around the XMLA (which is what the AS Processing Task is), then it should be unambiguous.

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

SQL task on SSIS, send execution process to email

Similar Messages

Maybe you are looking for